Add missing newlines to some uses of dev_<level> messages
Found these while looking at printk uses.
Add missing newlines to dev_<level> uses
Add missing KERN_<level> prefixes to multiline dev_<level>s
Fixed a wierd->weird spelling typo
Added a newline to a printk
Signed-off-by: Joe Perches <joe@perches.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Mark M. Hoffman <mhoffman@lightlink.com>
Cc: Roland Dreier <rolandd@cisco.com>
Cc: Tilman Schmidt <tilman@imap.cc>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: Stephen Hemminger <shemminger@linux-foundation.org>
Cc: Greg KH <greg@kroah.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Cc: James Smart <James.Smart@Emulex.Com>
Cc: Andrew Vasquez <andrew.vasquez@qlogic.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Jaroslav Kysela <perex@suse.cz>
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index f51e224..912d97a 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -332,7 +332,7 @@
return;
if (status)
- dev_dbg(&acm->data->dev, "bulk rx status %d", status);
+ dev_dbg(&acm->data->dev, "bulk rx status %d\n", status);
buf = rcv->buffer;
buf->size = urb->actual_length;
@@ -831,13 +831,13 @@
/* normal probing*/
if (!buffer) {
- err("Wierd descriptor references\n");
+ err("Weird descriptor references\n");
return -EINVAL;
}
if (!buflen) {
if (intf->cur_altsetting->endpoint->extralen && intf->cur_altsetting->endpoint->extra) {
- dev_dbg(&intf->dev,"Seeking extra descriptors on endpoint");
+ dev_dbg(&intf->dev,"Seeking extra descriptors on endpoint\n");
buflen = intf->cur_altsetting->endpoint->extralen;
buffer = intf->cur_altsetting->endpoint->extra;
} else {
@@ -887,24 +887,24 @@
if (!union_header) {
if (call_interface_num > 0) {
- dev_dbg(&intf->dev,"No union descriptor, using call management descriptor");
+ dev_dbg(&intf->dev,"No union descriptor, using call management descriptor\n");
data_interface = usb_ifnum_to_if(usb_dev, (data_interface_num = call_interface_num));
control_interface = intf;
} else {
- dev_dbg(&intf->dev,"No union descriptor, giving up");
+ dev_dbg(&intf->dev,"No union descriptor, giving up\n");
return -ENODEV;
}
} else {
control_interface = usb_ifnum_to_if(usb_dev, union_header->bMasterInterface0);
data_interface = usb_ifnum_to_if(usb_dev, (data_interface_num = union_header->bSlaveInterface0));
if (!control_interface || !data_interface) {
- dev_dbg(&intf->dev,"no interfaces");
+ dev_dbg(&intf->dev,"no interfaces\n");
return -ENODEV;
}
}
if (data_interface_num != call_interface_num)
- dev_dbg(&intf->dev,"Seperate call control interface. That is not fully supported.");
+ dev_dbg(&intf->dev,"Seperate call control interface. That is not fully supported.\n");
skip_normal_probe:
@@ -912,7 +912,7 @@
if (data_interface->cur_altsetting->desc.bInterfaceClass != CDC_DATA_INTERFACE_TYPE) {
if (control_interface->cur_altsetting->desc.bInterfaceClass == CDC_DATA_INTERFACE_TYPE) {
struct usb_interface *t;
- dev_dbg(&intf->dev,"Your device has switched interfaces.");
+ dev_dbg(&intf->dev,"Your device has switched interfaces.\n");
t = control_interface;
control_interface = data_interface;
@@ -927,7 +927,7 @@
return -ENODEV;
if (usb_interface_claimed(data_interface)) { /* valid in this context */
- dev_dbg(&intf->dev,"The data interface isn't available");
+ dev_dbg(&intf->dev,"The data interface isn't available\n");
return -EBUSY;
}
@@ -944,7 +944,7 @@
if (!usb_endpoint_dir_in(epread)) {
/* descriptors are swapped */
struct usb_endpoint_descriptor *t;
- dev_dbg(&intf->dev,"The data interface has switched endpoints");
+ dev_dbg(&intf->dev,"The data interface has switched endpoints\n");
t = epread;
epread = epwrite;
@@ -959,7 +959,7 @@
}
if (!(acm = kzalloc(sizeof(struct acm), GFP_KERNEL))) {
- dev_dbg(&intf->dev, "out of memory (acm kzalloc)");
+ dev_dbg(&intf->dev, "out of memory (acm kzalloc)\n");
goto alloc_fail;
}
@@ -985,26 +985,26 @@
buf = usb_buffer_alloc(usb_dev, ctrlsize, GFP_KERNEL, &acm->ctrl_dma);
if (!buf) {
- dev_dbg(&intf->dev, "out of memory (ctrl buffer alloc)");
+ dev_dbg(&intf->dev, "out of memory (ctrl buffer alloc)\n");
goto alloc_fail2;
}
acm->ctrl_buffer = buf;
if (acm_write_buffers_alloc(acm) < 0) {
- dev_dbg(&intf->dev, "out of memory (write buffer alloc)");
+ dev_dbg(&intf->dev, "out of memory (write buffer alloc)\n");
goto alloc_fail4;
}
acm->ctrlurb = usb_alloc_urb(0, GFP_KERNEL);
if (!acm->ctrlurb) {
- dev_dbg(&intf->dev, "out of memory (ctrlurb kmalloc)");
+ dev_dbg(&intf->dev, "out of memory (ctrlurb kmalloc)\n");
goto alloc_fail5;
}
for (i = 0; i < num_rx_buf; i++) {
struct acm_ru *rcv = &(acm->ru[i]);
if (!(rcv->urb = usb_alloc_urb(0, GFP_KERNEL))) {
- dev_dbg(&intf->dev, "out of memory (read urbs usb_alloc_urb)");
+ dev_dbg(&intf->dev, "out of memory (read urbs usb_alloc_urb)\n");
goto alloc_fail7;
}
@@ -1015,13 +1015,13 @@
struct acm_rb *buf = &(acm->rb[i]);
if (!(buf->base = usb_buffer_alloc(acm->dev, readsize, GFP_KERNEL, &buf->dma))) {
- dev_dbg(&intf->dev, "out of memory (read bufs usb_buffer_alloc)");
+ dev_dbg(&intf->dev, "out of memory (read bufs usb_buffer_alloc)\n");
goto alloc_fail7;
}
}
acm->writeurb = usb_alloc_urb(0, GFP_KERNEL);
if (!acm->writeurb) {
- dev_dbg(&intf->dev, "out of memory (writeurb kmalloc)");
+ dev_dbg(&intf->dev, "out of memory (writeurb kmalloc)\n");
goto alloc_fail7;
}