[PATCH] EHCI, split out PCI glue
This splits BIOS and PCI specific support out of ehci-hcd.c into
ehci-pci.c. It follows the model already used in the OHCI driver
so support for non-PCI EHCI controllers can be more easily added.
Signed-off-by: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
drivers/usb/host/ehci-hcd.c | 543 ++++++--------------------------------------
drivers/usb/host/ehci-pci.c | 414 +++++++++++++++++++++++++++++++++
drivers/usb/host/ehci.h | 1
3 files changed, 492 insertions(+), 466 deletions(-)
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 513fccb..af3c05e 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -300,44 +300,6 @@
spin_unlock_irqrestore (&ehci->lock, flags);
}
-#ifdef CONFIG_PCI
-
-/* EHCI 0.96 (and later) section 5.1 says how to kick BIOS/SMM/...
- * off the controller (maybe it can boot from highspeed USB disks).
- */
-static int bios_handoff (struct ehci_hcd *ehci, int where, u32 cap)
-{
- struct pci_dev *pdev = to_pci_dev(ehci_to_hcd(ehci)->self.controller);
-
- /* always say Linux will own the hardware */
- pci_write_config_byte(pdev, where + 3, 1);
-
- /* maybe wait a while for BIOS to respond */
- if (cap & (1 << 16)) {
- int msec = 5000;
-
- do {
- msleep(10);
- msec -= 10;
- pci_read_config_dword(pdev, where, &cap);
- } while ((cap & (1 << 16)) && msec);
- if (cap & (1 << 16)) {
- ehci_err(ehci, "BIOS handoff failed (%d, %08x)\n",
- where, cap);
- // some BIOS versions seem buggy...
- // return 1;
- ehci_warn (ehci, "continuing after BIOS bug...\n");
- /* disable all SMIs, and clear "BIOS owns" flag */
- pci_write_config_dword(pdev, where + 4, 0);
- pci_write_config_byte(pdev, where + 2, 0);
- } else
- ehci_dbg(ehci, "BIOS handoff succeeded\n");
- }
- return 0;
-}
-
-#endif
-
/* Reboot notifiers kick in for silicon on any bus (not just pci, etc).
* This forcibly disables dma and IRQs, helping kexec and other cases
* where the next system software may expect clean state.
@@ -371,156 +333,90 @@
msleep(20);
}
+/*-------------------------------------------------------------------------*/
-/* called by khubd or root hub init threads */
-
-static int ehci_hc_reset (struct usb_hcd *hcd)
+/*
+ * ehci_work is called from some interrupts, timers, and so on.
+ * it calls driver completion functions, after dropping ehci->lock.
+ */
+static void ehci_work (struct ehci_hcd *ehci, struct pt_regs *regs)
{
- struct ehci_hcd *ehci = hcd_to_ehci (hcd);
- u32 temp;
- unsigned count = 256/4;
+ timer_action_done (ehci, TIMER_IO_WATCHDOG);
+ if (ehci->reclaim_ready)
+ end_unlink_async (ehci, regs);
- spin_lock_init (&ehci->lock);
+ /* another CPU may drop ehci->lock during a schedule scan while
+ * it reports urb completions. this flag guards against bogus
+ * attempts at re-entrant schedule scanning.
+ */
+ if (ehci->scanning)
+ return;
+ ehci->scanning = 1;
+ scan_async (ehci, regs);
+ if (ehci->next_uframe != -1)
+ scan_periodic (ehci, regs);
+ ehci->scanning = 0;
- ehci->caps = hcd->regs;
- ehci->regs = hcd->regs + HC_LENGTH (readl (&ehci->caps->hc_capbase));
- dbg_hcs_params (ehci, "reset");
- dbg_hcc_params (ehci, "reset");
-
- /* cache this readonly data; minimize chip reads */
- ehci->hcs_params = readl (&ehci->caps->hcs_params);
-
-#ifdef CONFIG_PCI
- if (hcd->self.controller->bus == &pci_bus_type) {
- struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
-
- switch (pdev->vendor) {
- case PCI_VENDOR_ID_TDI:
- if (pdev->device == PCI_DEVICE_ID_TDI_EHCI) {
- ehci->is_tdi_rh_tt = 1;
- tdi_reset (ehci);
- }
- break;
- case PCI_VENDOR_ID_AMD:
- /* AMD8111 EHCI doesn't work, according to AMD errata */
- if (pdev->device == 0x7463) {
- ehci_info (ehci, "ignoring AMD8111 (errata)\n");
- return -EIO;
- }
- break;
- case PCI_VENDOR_ID_NVIDIA:
- /* NVidia reports that certain chips don't handle
- * QH, ITD, or SITD addresses above 2GB. (But TD,
- * data buffer, and periodic schedule are normal.)
- */
- switch (pdev->device) {
- case 0x003c: /* MCP04 */
- case 0x005b: /* CK804 */
- case 0x00d8: /* CK8 */
- case 0x00e8: /* CK8S */
- if (pci_set_consistent_dma_mask(pdev,
- DMA_31BIT_MASK) < 0)
- ehci_warn (ehci, "can't enable NVidia "
- "workaround for >2GB RAM\n");
- break;
- }
- break;
- }
-
- /* optional debug port, normally in the first BAR */
- temp = pci_find_capability (pdev, 0x0a);
- if (temp) {
- pci_read_config_dword(pdev, temp, &temp);
- temp >>= 16;
- if ((temp & (3 << 13)) == (1 << 13)) {
- temp &= 0x1fff;
- ehci->debug = hcd->regs + temp;
- temp = readl (&ehci->debug->control);
- ehci_info (ehci, "debug port %d%s\n",
- HCS_DEBUG_PORT(ehci->hcs_params),
- (temp & DBGP_ENABLED)
- ? " IN USE"
- : "");
- if (!(temp & DBGP_ENABLED))
- ehci->debug = NULL;
- }
- }
-
- temp = HCC_EXT_CAPS (readl (&ehci->caps->hcc_params));
- } else
- temp = 0;
-
- /* EHCI 0.96 and later may have "extended capabilities" */
- while (temp && count--) {
- u32 cap;
-
- pci_read_config_dword (to_pci_dev(hcd->self.controller),
- temp, &cap);
- ehci_dbg (ehci, "capability %04x at %02x\n", cap, temp);
- switch (cap & 0xff) {
- case 1: /* BIOS/SMM/... handoff */
- if (bios_handoff (ehci, temp, cap) != 0)
- return -EOPNOTSUPP;
- break;
- case 0: /* illegal reserved capability */
- ehci_warn (ehci, "illegal capability!\n");
- cap = 0;
- /* FALLTHROUGH */
- default: /* unknown */
- break;
- }
- temp = (cap >> 8) & 0xff;
- }
- if (!count) {
- ehci_err (ehci, "bogus capabilities ... PCI problems!\n");
- return -EIO;
- }
- if (ehci_is_TDI(ehci))
- ehci_reset (ehci);
-#endif
-
- ehci_port_power (ehci, 0);
-
- /* at least the Genesys GL880S needs fixup here */
- temp = HCS_N_CC(ehci->hcs_params) * HCS_N_PCC(ehci->hcs_params);
- temp &= 0x0f;
- if (temp && HCS_N_PORTS(ehci->hcs_params) > temp) {
- ehci_dbg (ehci, "bogus port configuration: "
- "cc=%d x pcc=%d < ports=%d\n",
- HCS_N_CC(ehci->hcs_params),
- HCS_N_PCC(ehci->hcs_params),
- HCS_N_PORTS(ehci->hcs_params));
-
-#ifdef CONFIG_PCI
- if (hcd->self.controller->bus == &pci_bus_type) {
- struct pci_dev *pdev;
-
- pdev = to_pci_dev(hcd->self.controller);
- switch (pdev->vendor) {
- case 0x17a0: /* GENESYS */
- /* GL880S: should be PORTS=2 */
- temp |= (ehci->hcs_params & ~0xf);
- ehci->hcs_params = temp;
- break;
- case PCI_VENDOR_ID_NVIDIA:
- /* NF4: should be PCC=10 */
- break;
- }
- }
-#endif
- }
-
- /* force HC to halt state */
- return ehci_halt (ehci);
+ /* the IO watchdog guards against hardware or driver bugs that
+ * misplace IRQs, and should let us run completely without IRQs.
+ * such lossage has been observed on both VT6202 and VT8235.
+ */
+ if (HC_IS_RUNNING (ehci_to_hcd(ehci)->state) &&
+ (ehci->async->qh_next.ptr != NULL ||
+ ehci->periodic_sched != 0))
+ timer_action (ehci, TIMER_IO_WATCHDOG);
}
-static int ehci_start (struct usb_hcd *hcd)
+static void ehci_stop (struct usb_hcd *hcd)
+{
+ struct ehci_hcd *ehci = hcd_to_ehci (hcd);
+
+ ehci_dbg (ehci, "stop\n");
+
+ /* Turn off port power on all root hub ports. */
+ ehci_port_power (ehci, 0);
+
+ /* no more interrupts ... */
+ del_timer_sync (&ehci->watchdog);
+
+ spin_lock_irq(&ehci->lock);
+ if (HC_IS_RUNNING (hcd->state))
+ ehci_quiesce (ehci);
+
+ ehci_reset (ehci);
+ writel (0, &ehci->regs->intr_enable);
+ spin_unlock_irq(&ehci->lock);
+
+ /* let companion controllers work when we aren't */
+ writel (0, &ehci->regs->configured_flag);
+ unregister_reboot_notifier (&ehci->reboot_notifier);
+
+ remove_debug_files (ehci);
+
+ /* root hub is shut down separately (first, when possible) */
+ spin_lock_irq (&ehci->lock);
+ if (ehci->async)
+ ehci_work (ehci, NULL);
+ spin_unlock_irq (&ehci->lock);
+ ehci_mem_cleanup (ehci);
+
+#ifdef EHCI_STATS
+ ehci_dbg (ehci, "irq normal %ld err %ld reclaim %ld (lost %ld)\n",
+ ehci->stats.normal, ehci->stats.error, ehci->stats.reclaim,
+ ehci->stats.lost_iaa);
+ ehci_dbg (ehci, "complete %ld unlink %ld\n",
+ ehci->stats.complete, ehci->stats.unlink);
+#endif
+
+ dbg_status (ehci, "ehci_stop completed", readl (&ehci->regs->status));
+}
+
+static int ehci_run (struct usb_hcd *hcd)
{
struct ehci_hcd *ehci = hcd_to_ehci (hcd);
u32 temp;
int retval;
u32 hcc_params;
- u8 sbrn = 0;
int first;
/* skip some things on restart paths */
@@ -559,27 +455,6 @@
}
writel (ehci->periodic_dma, &ehci->regs->frame_list);
-#ifdef CONFIG_PCI
- if (hcd->self.controller->bus == &pci_bus_type) {
- struct pci_dev *pdev;
- u16 port_wake;
-
- pdev = to_pci_dev(hcd->self.controller);
-
- /* Serial Bus Release Number is at PCI 0x60 offset */
- pci_read_config_byte(pdev, 0x60, &sbrn);
-
- /* port wake capability, reported by boot firmware */
- pci_read_config_word(pdev, 0x62, &port_wake);
- hcd->can_wakeup = (port_wake & 1) != 0;
-
- /* help hc dma work well with cachelines */
- retval = pci_set_mwi(pdev);
- if (retval)
- ehci_dbg(ehci, "unable to enable MWI - not fatal.\n");
- }
-#endif
-
/*
* dedicate a qh for the async ring head, since we couldn't unlink
* a 'real' qh without stopping the async schedule [4.8]. use it
@@ -675,7 +550,7 @@
temp = HC_VERSION(readl (&ehci->caps->hc_capbase));
ehci_info (ehci,
"USB %x.%x %s, EHCI %x.%02x, driver %s\n",
- ((sbrn & 0xf0)>>4), (sbrn & 0x0f),
+ ((ehci->sbrn & 0xf0)>>4), (ehci->sbrn & 0x0f),
first ? "initialized" : "restarted",
temp >> 8, temp & 0xff, DRIVER_VERSION);
@@ -687,188 +562,6 @@
return 0;
}
-/* always called by thread; normally rmmod */
-
-static void ehci_stop (struct usb_hcd *hcd)
-{
- struct ehci_hcd *ehci = hcd_to_ehci (hcd);
-
- ehci_dbg (ehci, "stop\n");
-
- /* Turn off port power on all root hub ports. */
- ehci_port_power (ehci, 0);
-
- /* no more interrupts ... */
- del_timer_sync (&ehci->watchdog);
-
- spin_lock_irq(&ehci->lock);
- if (HC_IS_RUNNING (hcd->state))
- ehci_quiesce (ehci);
-
- ehci_reset (ehci);
- writel (0, &ehci->regs->intr_enable);
- spin_unlock_irq(&ehci->lock);
-
- /* let companion controllers work when we aren't */
- writel (0, &ehci->regs->configured_flag);
- unregister_reboot_notifier (&ehci->reboot_notifier);
-
- remove_debug_files (ehci);
-
- /* root hub is shut down separately (first, when possible) */
- spin_lock_irq (&ehci->lock);
- if (ehci->async)
- ehci_work (ehci, NULL);
- spin_unlock_irq (&ehci->lock);
- ehci_mem_cleanup (ehci);
-
-#ifdef EHCI_STATS
- ehci_dbg (ehci, "irq normal %ld err %ld reclaim %ld (lost %ld)\n",
- ehci->stats.normal, ehci->stats.error, ehci->stats.reclaim,
- ehci->stats.lost_iaa);
- ehci_dbg (ehci, "complete %ld unlink %ld\n",
- ehci->stats.complete, ehci->stats.unlink);
-#endif
-
- dbg_status (ehci, "ehci_stop completed", readl (&ehci->regs->status));
-}
-
-static int ehci_get_frame (struct usb_hcd *hcd)
-{
- struct ehci_hcd *ehci = hcd_to_ehci (hcd);
- return (readl (&ehci->regs->frame_index) >> 3) % ehci->periodic_size;
-}
-
-/*-------------------------------------------------------------------------*/
-
-#ifdef CONFIG_PM
-
-/* suspend/resume, section 4.3 */
-
-/* These routines rely on the bus (pci, platform, etc)
- * to handle powerdown and wakeup, and currently also on
- * transceivers that don't need any software attention to set up
- * the right sort of wakeup.
- */
-
-static int ehci_suspend (struct usb_hcd *hcd, pm_message_t message)
-{
- struct ehci_hcd *ehci = hcd_to_ehci (hcd);
-
- if (time_before (jiffies, ehci->next_statechange))
- msleep (100);
-
-#ifdef CONFIG_USB_SUSPEND
- (void) usb_suspend_device (hcd->self.root_hub);
-#else
- usb_lock_device (hcd->self.root_hub);
- (void) ehci_hub_suspend (hcd);
- usb_unlock_device (hcd->self.root_hub);
-#endif
-
- // save (PCI) FLADJ in case of Vaux power loss
- // ... we'd only use it to handle clock skew
-
- return 0;
-}
-
-static int ehci_resume (struct usb_hcd *hcd)
-{
- struct ehci_hcd *ehci = hcd_to_ehci (hcd);
- unsigned port;
- struct usb_device *root = hcd->self.root_hub;
- int retval = -EINVAL;
-
- // maybe restore (PCI) FLADJ
-
- if (time_before (jiffies, ehci->next_statechange))
- msleep (100);
-
- /* If any port is suspended (or owned by the companion),
- * we know we can/must resume the HC (and mustn't reset it).
- */
- for (port = HCS_N_PORTS (ehci->hcs_params); port > 0; ) {
- u32 status;
- port--;
- status = readl (&ehci->regs->port_status [port]);
- if (!(status & PORT_POWER))
- continue;
- if (status & (PORT_SUSPEND | PORT_OWNER)) {
- down (&hcd->self.root_hub->serialize);
- retval = ehci_hub_resume (hcd);
- up (&hcd->self.root_hub->serialize);
- break;
- }
- if (!root->children [port])
- continue;
- dbg_port (ehci, __FUNCTION__, port + 1, status);
- usb_set_device_state (root->children[port],
- USB_STATE_NOTATTACHED);
- }
-
- /* Else reset, to cope with power loss or flush-to-storage
- * style "resume" having activated BIOS during reboot.
- */
- if (port == 0) {
- (void) ehci_halt (ehci);
- (void) ehci_reset (ehci);
- (void) ehci_hc_reset (hcd);
-
- /* emptying the schedule aborts any urbs */
- spin_lock_irq (&ehci->lock);
- if (ehci->reclaim)
- ehci->reclaim_ready = 1;
- ehci_work (ehci, NULL);
- spin_unlock_irq (&ehci->lock);
-
- /* restart; khubd will disconnect devices */
- retval = ehci_start (hcd);
-
- /* here we "know" root ports should always stay powered;
- * but some controllers may lose all power.
- */
- ehci_port_power (ehci, 1);
- }
-
- return retval;
-}
-
-#endif
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * ehci_work is called from some interrupts, timers, and so on.
- * it calls driver completion functions, after dropping ehci->lock.
- */
-static void ehci_work (struct ehci_hcd *ehci, struct pt_regs *regs)
-{
- timer_action_done (ehci, TIMER_IO_WATCHDOG);
- if (ehci->reclaim_ready)
- end_unlink_async (ehci, regs);
-
- /* another CPU may drop ehci->lock during a schedule scan while
- * it reports urb completions. this flag guards against bogus
- * attempts at re-entrant schedule scanning.
- */
- if (ehci->scanning)
- return;
- ehci->scanning = 1;
- scan_async (ehci, regs);
- if (ehci->next_uframe != -1)
- scan_periodic (ehci, regs);
- ehci->scanning = 0;
-
- /* the IO watchdog guards against hardware or driver bugs that
- * misplace IRQs, and should let us run completely without IRQs.
- * such lossage has been observed on both VT6202 and VT8235.
- */
- if (HC_IS_RUNNING (ehci_to_hcd(ehci)->state) &&
- (ehci->async->qh_next.ptr != NULL ||
- ehci->periodic_sched != 0))
- timer_action (ehci, TIMER_IO_WATCHDOG);
-}
-
/*-------------------------------------------------------------------------*/
static irqreturn_t ehci_irq (struct usb_hcd *hcd, struct pt_regs *regs)
@@ -1179,106 +872,24 @@
return;
}
-/*-------------------------------------------------------------------------*/
-
-static const struct hc_driver ehci_driver = {
- .description = hcd_name,
- .product_desc = "EHCI Host Controller",
- .hcd_priv_size = sizeof(struct ehci_hcd),
-
- /*
- * generic hardware linkage
- */
- .irq = ehci_irq,
- .flags = HCD_MEMORY | HCD_USB2,
-
- /*
- * basic lifecycle operations
- */
- .reset = ehci_hc_reset,
- .start = ehci_start,
-#ifdef CONFIG_PM
- .suspend = ehci_suspend,
- .resume = ehci_resume,
-#endif
- .stop = ehci_stop,
-
- /*
- * managing i/o requests and associated device resources
- */
- .urb_enqueue = ehci_urb_enqueue,
- .urb_dequeue = ehci_urb_dequeue,
- .endpoint_disable = ehci_endpoint_disable,
-
- /*
- * scheduling support
- */
- .get_frame_number = ehci_get_frame,
-
- /*
- * root hub support
- */
- .hub_status_data = ehci_hub_status_data,
- .hub_control = ehci_hub_control,
- .hub_suspend = ehci_hub_suspend,
- .hub_resume = ehci_hub_resume,
-};
+static int ehci_get_frame (struct usb_hcd *hcd)
+{
+ struct ehci_hcd *ehci = hcd_to_ehci (hcd);
+ return (readl (&ehci->regs->frame_index) >> 3) % ehci->periodic_size;
+}
/*-------------------------------------------------------------------------*/
-/* EHCI 1.0 doesn't require PCI */
-
-#ifdef CONFIG_PCI
-
-/* PCI driver selection metadata; PCI hotplugging uses this */
-static const struct pci_device_id pci_ids [] = { {
- /* handle any USB 2.0 EHCI controller */
- PCI_DEVICE_CLASS(((PCI_CLASS_SERIAL_USB << 8) | 0x20), ~0),
- .driver_data = (unsigned long) &ehci_driver,
- },
- { /* end: all zeroes */ }
-};
-MODULE_DEVICE_TABLE (pci, pci_ids);
-
-/* pci driver glue; this is a "new style" PCI driver module */
-static struct pci_driver ehci_pci_driver = {
- .name = (char *) hcd_name,
- .id_table = pci_ids,
-
- .probe = usb_hcd_pci_probe,
- .remove = usb_hcd_pci_remove,
-
-#ifdef CONFIG_PM
- .suspend = usb_hcd_pci_suspend,
- .resume = usb_hcd_pci_resume,
-#endif
-};
-
-#endif /* PCI */
-
-
#define DRIVER_INFO DRIVER_VERSION " " DRIVER_DESC
MODULE_DESCRIPTION (DRIVER_INFO);
MODULE_AUTHOR (DRIVER_AUTHOR);
MODULE_LICENSE ("GPL");
-static int __init init (void)
-{
- if (usb_disabled())
- return -ENODEV;
+#ifdef CONFIG_PCI
+#include "ehci-pci.c"
+#endif
- pr_debug ("%s: block sizes: qh %Zd qtd %Zd itd %Zd sitd %Zd\n",
- hcd_name,
- sizeof (struct ehci_qh), sizeof (struct ehci_qtd),
- sizeof (struct ehci_itd), sizeof (struct ehci_sitd));
-
- return pci_register_driver (&ehci_pci_driver);
-}
-module_init (init);
-
-static void __exit cleanup (void)
-{
- pci_unregister_driver (&ehci_pci_driver);
-}
-module_exit (cleanup);
+#if !defined(CONFIG_PCI)
+#error "missing bus glue for ehci-hcd"
+#endif
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
new file mode 100644
index 0000000..66ebf75
--- /dev/null
+++ b/drivers/usb/host/ehci-pci.c
@@ -0,0 +1,414 @@
+/*
+ * EHCI HCD (Host Controller Driver) PCI Bus Glue.
+ *
+ * Copyright (c) 2000-2004 by David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef CONFIG_PCI
+#error "This file is PCI bus glue. CONFIG_PCI must be defined."
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+/* EHCI 0.96 (and later) section 5.1 says how to kick BIOS/SMM/...
+ * off the controller (maybe it can boot from highspeed USB disks).
+ */
+static int bios_handoff (struct ehci_hcd *ehci, int where, u32 cap)
+{
+ struct pci_dev *pdev = to_pci_dev(ehci_to_hcd(ehci)->self.controller);
+
+ /* always say Linux will own the hardware */
+ pci_write_config_byte(pdev, where + 3, 1);
+
+ /* maybe wait a while for BIOS to respond */
+ if (cap & (1 << 16)) {
+ int msec = 5000;
+
+ do {
+ msleep(10);
+ msec -= 10;
+ pci_read_config_dword(pdev, where, &cap);
+ } while ((cap & (1 << 16)) && msec);
+ if (cap & (1 << 16)) {
+ ehci_err(ehci, "BIOS handoff failed (%d, %08x)\n",
+ where, cap);
+ // some BIOS versions seem buggy...
+ // return 1;
+ ehci_warn (ehci, "continuing after BIOS bug...\n");
+ /* disable all SMIs, and clear "BIOS owns" flag */
+ pci_write_config_dword(pdev, where + 4, 0);
+ pci_write_config_byte(pdev, where + 2, 0);
+ } else
+ ehci_dbg(ehci, "BIOS handoff succeeded\n");
+ }
+ return 0;
+}
+
+/* called by khubd or root hub init threads */
+static int ehci_pci_reset (struct usb_hcd *hcd)
+{
+ struct ehci_hcd *ehci = hcd_to_ehci (hcd);
+ u32 temp;
+ unsigned count = 256/4;
+
+ spin_lock_init (&ehci->lock);
+
+ ehci->caps = hcd->regs;
+ ehci->regs = hcd->regs + HC_LENGTH (readl (&ehci->caps->hc_capbase));
+ dbg_hcs_params (ehci, "reset");
+ dbg_hcc_params (ehci, "reset");
+
+ /* cache this readonly data; minimize chip reads */
+ ehci->hcs_params = readl (&ehci->caps->hcs_params);
+
+ if (hcd->self.controller->bus == &pci_bus_type) {
+ struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
+
+ switch (pdev->vendor) {
+ case PCI_VENDOR_ID_TDI:
+ if (pdev->device == PCI_DEVICE_ID_TDI_EHCI) {
+ ehci->is_tdi_rh_tt = 1;
+ tdi_reset (ehci);
+ }
+ break;
+ case PCI_VENDOR_ID_AMD:
+ /* AMD8111 EHCI doesn't work, according to AMD errata */
+ if (pdev->device == 0x7463) {
+ ehci_info (ehci, "ignoring AMD8111 (errata)\n");
+ return -EIO;
+ }
+ break;
+ case PCI_VENDOR_ID_NVIDIA:
+ /* NVidia reports that certain chips don't handle
+ * QH, ITD, or SITD addresses above 2GB. (But TD,
+ * data buffer, and periodic schedule are normal.)
+ */
+ switch (pdev->device) {
+ case 0x003c: /* MCP04 */
+ case 0x005b: /* CK804 */
+ case 0x00d8: /* CK8 */
+ case 0x00e8: /* CK8S */
+ if (pci_set_consistent_dma_mask(pdev,
+ DMA_31BIT_MASK) < 0)
+ ehci_warn (ehci, "can't enable NVidia "
+ "workaround for >2GB RAM\n");
+ break;
+ }
+ break;
+ }
+
+ /* optional debug port, normally in the first BAR */
+ temp = pci_find_capability (pdev, 0x0a);
+ if (temp) {
+ pci_read_config_dword(pdev, temp, &temp);
+ temp >>= 16;
+ if ((temp & (3 << 13)) == (1 << 13)) {
+ temp &= 0x1fff;
+ ehci->debug = hcd->regs + temp;
+ temp = readl (&ehci->debug->control);
+ ehci_info (ehci, "debug port %d%s\n",
+ HCS_DEBUG_PORT(ehci->hcs_params),
+ (temp & DBGP_ENABLED)
+ ? " IN USE"
+ : "");
+ if (!(temp & DBGP_ENABLED))
+ ehci->debug = NULL;
+ }
+ }
+
+ temp = HCC_EXT_CAPS (readl (&ehci->caps->hcc_params));
+ } else
+ temp = 0;
+
+ /* EHCI 0.96 and later may have "extended capabilities" */
+ while (temp && count--) {
+ u32 cap;
+
+ pci_read_config_dword (to_pci_dev(hcd->self.controller),
+ temp, &cap);
+ ehci_dbg (ehci, "capability %04x at %02x\n", cap, temp);
+ switch (cap & 0xff) {
+ case 1: /* BIOS/SMM/... handoff */
+ if (bios_handoff (ehci, temp, cap) != 0)
+ return -EOPNOTSUPP;
+ break;
+ case 0: /* illegal reserved capability */
+ ehci_warn (ehci, "illegal capability!\n");
+ cap = 0;
+ /* FALLTHROUGH */
+ default: /* unknown */
+ break;
+ }
+ temp = (cap >> 8) & 0xff;
+ }
+ if (!count) {
+ ehci_err (ehci, "bogus capabilities ... PCI problems!\n");
+ return -EIO;
+ }
+ if (ehci_is_TDI(ehci))
+ ehci_reset (ehci);
+
+ ehci_port_power (ehci, 0);
+
+ /* at least the Genesys GL880S needs fixup here */
+ temp = HCS_N_CC(ehci->hcs_params) * HCS_N_PCC(ehci->hcs_params);
+ temp &= 0x0f;
+ if (temp && HCS_N_PORTS(ehci->hcs_params) > temp) {
+ ehci_dbg (ehci, "bogus port configuration: "
+ "cc=%d x pcc=%d < ports=%d\n",
+ HCS_N_CC(ehci->hcs_params),
+ HCS_N_PCC(ehci->hcs_params),
+ HCS_N_PORTS(ehci->hcs_params));
+
+ if (hcd->self.controller->bus == &pci_bus_type) {
+ struct pci_dev *pdev;
+
+ pdev = to_pci_dev(hcd->self.controller);
+ switch (pdev->vendor) {
+ case 0x17a0: /* GENESYS */
+ /* GL880S: should be PORTS=2 */
+ temp |= (ehci->hcs_params & ~0xf);
+ ehci->hcs_params = temp;
+ break;
+ case PCI_VENDOR_ID_NVIDIA:
+ /* NF4: should be PCC=10 */
+ break;
+ }
+ }
+ }
+
+ /* force HC to halt state */
+ return ehci_halt (ehci);
+}
+
+static int ehci_pci_start (struct usb_hcd *hcd)
+{
+ struct ehci_hcd *ehci = hcd_to_ehci (hcd);
+ int result = 0;
+
+ if (hcd->self.controller->bus == &pci_bus_type) {
+ struct pci_dev *pdev;
+ u16 port_wake;
+
+ pdev = to_pci_dev(hcd->self.controller);
+
+ /* Serial Bus Release Number is at PCI 0x60 offset */
+ pci_read_config_byte(pdev, 0x60, &ehci->sbrn);
+
+ /* port wake capability, reported by boot firmware */
+ pci_read_config_word(pdev, 0x62, &port_wake);
+ hcd->can_wakeup = (port_wake & 1) != 0;
+
+ /* help hc dma work well with cachelines */
+ result = pci_set_mwi(pdev);
+ if (result)
+ ehci_dbg(ehci, "unable to enable MWI - not fatal.\n");
+ }
+
+ return ehci_run (hcd);
+}
+
+/* always called by thread; normally rmmod */
+
+static void ehci_pci_stop (struct usb_hcd *hcd)
+{
+ ehci_stop (hcd);
+}
+
+/*-------------------------------------------------------------------------*/
+
+#ifdef CONFIG_PM
+
+/* suspend/resume, section 4.3 */
+
+/* These routines rely on the bus (pci, platform, etc)
+ * to handle powerdown and wakeup, and currently also on
+ * transceivers that don't need any software attention to set up
+ * the right sort of wakeup.
+ */
+
+static int ehci_pci_suspend (struct usb_hcd *hcd, pm_message_t message)
+{
+ struct ehci_hcd *ehci = hcd_to_ehci (hcd);
+
+ if (time_before (jiffies, ehci->next_statechange))
+ msleep (100);
+
+#ifdef CONFIG_USB_SUSPEND
+ (void) usb_suspend_device (hcd->self.root_hub);
+#else
+ usb_lock_device (hcd->self.root_hub);
+ (void) ehci_hub_suspend (hcd);
+ usb_unlock_device (hcd->self.root_hub);
+#endif
+
+ // save (PCI) FLADJ in case of Vaux power loss
+ // ... we'd only use it to handle clock skew
+
+ return 0;
+}
+
+static int ehci_pci_resume (struct usb_hcd *hcd)
+{
+ struct ehci_hcd *ehci = hcd_to_ehci (hcd);
+ unsigned port;
+ struct usb_device *root = hcd->self.root_hub;
+ int retval = -EINVAL;
+
+ // maybe restore (PCI) FLADJ
+
+ if (time_before (jiffies, ehci->next_statechange))
+ msleep (100);
+
+ /* If any port is suspended (or owned by the companion),
+ * we know we can/must resume the HC (and mustn't reset it).
+ */
+ for (port = HCS_N_PORTS (ehci->hcs_params); port > 0; ) {
+ u32 status;
+ port--;
+ status = readl (&ehci->regs->port_status [port]);
+ if (!(status & PORT_POWER))
+ continue;
+ if (status & (PORT_SUSPEND | PORT_OWNER)) {
+ down (&hcd->self.root_hub->serialize);
+ retval = ehci_hub_resume (hcd);
+ up (&hcd->self.root_hub->serialize);
+ break;
+ }
+ if (!root->children [port])
+ continue;
+ dbg_port (ehci, __FUNCTION__, port + 1, status);
+ usb_set_device_state (root->children[port],
+ USB_STATE_NOTATTACHED);
+ }
+
+ /* Else reset, to cope with power loss or flush-to-storage
+ * style "resume" having activated BIOS during reboot.
+ */
+ if (port == 0) {
+ (void) ehci_halt (ehci);
+ (void) ehci_reset (ehci);
+ (void) ehci_pci_reset (hcd);
+
+ /* emptying the schedule aborts any urbs */
+ spin_lock_irq (&ehci->lock);
+ if (ehci->reclaim)
+ ehci->reclaim_ready = 1;
+ ehci_work (ehci, NULL);
+ spin_unlock_irq (&ehci->lock);
+
+ /* restart; khubd will disconnect devices */
+ retval = ehci_run (hcd);
+
+ /* here we "know" root ports should always stay powered;
+ * but some controllers may lose all power.
+ */
+ ehci_port_power (ehci, 1);
+ }
+
+ return retval;
+}
+#endif
+
+static const struct hc_driver ehci_pci_hc_driver = {
+ .description = hcd_name,
+ .product_desc = "EHCI Host Controller",
+ .hcd_priv_size = sizeof(struct ehci_hcd),
+
+ /*
+ * generic hardware linkage
+ */
+ .irq = ehci_irq,
+ .flags = HCD_MEMORY | HCD_USB2,
+
+ /*
+ * basic lifecycle operations
+ */
+ .reset = ehci_pci_reset,
+ .start = ehci_pci_start,
+#ifdef CONFIG_PM
+ .suspend = ehci_pci_suspend,
+ .resume = ehci_pci_resume,
+#endif
+ .stop = ehci_pci_stop,
+
+ /*
+ * managing i/o requests and associated device resources
+ */
+ .urb_enqueue = ehci_urb_enqueue,
+ .urb_dequeue = ehci_urb_dequeue,
+ .endpoint_disable = ehci_endpoint_disable,
+
+ /*
+ * scheduling support
+ */
+ .get_frame_number = ehci_get_frame,
+
+ /*
+ * root hub support
+ */
+ .hub_status_data = ehci_hub_status_data,
+ .hub_control = ehci_hub_control,
+ .hub_suspend = ehci_hub_suspend,
+ .hub_resume = ehci_hub_resume,
+};
+
+/*-------------------------------------------------------------------------*/
+
+/* PCI driver selection metadata; PCI hotplugging uses this */
+static const struct pci_device_id pci_ids [] = { {
+ /* handle any USB 2.0 EHCI controller */
+ PCI_DEVICE_CLASS(((PCI_CLASS_SERIAL_USB << 8) | 0x20), ~0),
+ .driver_data = (unsigned long) &ehci_pci_hc_driver,
+ },
+ { /* end: all zeroes */ }
+};
+MODULE_DEVICE_TABLE (pci, pci_ids);
+
+/* pci driver glue; this is a "new style" PCI driver module */
+static struct pci_driver ehci_pci_driver = {
+ .name = (char *) hcd_name,
+ .id_table = pci_ids,
+
+ .probe = usb_hcd_pci_probe,
+ .remove = usb_hcd_pci_remove,
+
+#ifdef CONFIG_PM
+ .suspend = usb_hcd_pci_suspend,
+ .resume = usb_hcd_pci_resume,
+#endif
+};
+
+static int __init ehci_hcd_pci_init (void)
+{
+ if (usb_disabled())
+ return -ENODEV;
+
+ pr_debug ("%s: block sizes: qh %Zd qtd %Zd itd %Zd sitd %Zd\n",
+ hcd_name,
+ sizeof (struct ehci_qh), sizeof (struct ehci_qtd),
+ sizeof (struct ehci_itd), sizeof (struct ehci_sitd));
+
+ return pci_register_driver (&ehci_pci_driver);
+}
+module_init (ehci_hcd_pci_init);
+
+static void __exit ehci_hcd_pci_cleanup (void)
+{
+ pci_unregister_driver (&ehci_pci_driver);
+}
+module_exit (ehci_hcd_pci_cleanup);
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index f34a051..18e257c 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -97,6 +97,7 @@
#else
# define COUNT(x) do {} while (0)
#endif
+ u8 sbrn; /* packed release number */
};
/* convert between an HCD pointer and the corresponding EHCI_HCD */