diff --git a/arch/um/drivers/slip_kern.c b/arch/um/drivers/slip_kern.c
index 5ec1756..dd2aadc 100644
--- a/arch/um/drivers/slip_kern.c
+++ b/arch/um/drivers/slip_kern.c
@@ -30,7 +30,6 @@
 
 	slip_proto_init(&spri->slip);
 
-	dev->init = NULL;
 	dev->hard_header_len = 0;
 	dev->header_ops = NULL;
 	dev->addr_len = 0;
diff --git a/arch/um/drivers/slirp_kern.c b/arch/um/drivers/slirp_kern.c
index f15a6e7..e376284 100644
--- a/arch/um/drivers/slirp_kern.c
+++ b/arch/um/drivers/slirp_kern.c
@@ -32,7 +32,6 @@
 
 	slip_proto_init(&spri->slip);
 
-	dev->init = NULL;
 	dev->hard_header_len = 0;
 	dev->header_ops = NULL;
 	dev->addr_len = 0;
diff --git a/arch/um/include/asm/dma-mapping.h b/arch/um/include/asm/dma-mapping.h
index 90fc708..378de4b 100644
--- a/arch/um/include/asm/dma-mapping.h
+++ b/arch/um/include/asm/dma-mapping.h
@@ -79,14 +79,14 @@
 }
 
 static inline void
-dma_sync_single(struct device *dev, dma_addr_t dma_handle, size_t size,
+dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, size_t size,
 		enum dma_data_direction direction)
 {
 	BUG();
 }
 
 static inline void
-dma_sync_sg(struct device *dev, struct scatterlist *sg, int nelems,
+dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nelems,
 	    enum dma_data_direction direction)
 {
 	BUG();
diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
index c961fe4..39b393d 100644
--- a/drivers/gpu/drm/Kconfig
+++ b/drivers/gpu/drm/Kconfig
@@ -81,6 +81,7 @@
 
 config DRM_I915
 	tristate "i915 driver"
+	depends on AGP_INTEL
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile
index 4e89ab0..fe23f29 100644
--- a/drivers/gpu/drm/Makefile
+++ b/drivers/gpu/drm/Makefile
@@ -16,6 +16,7 @@
 drm-$(CONFIG_COMPAT) += drm_ioc32.o
 
 obj-$(CONFIG_DRM)	+= drm.o
+obj-$(CONFIG_DRM_TTM)	+= ttm/
 obj-$(CONFIG_DRM_TDFX)	+= tdfx/
 obj-$(CONFIG_DRM_R128)	+= r128/
 obj-$(CONFIG_DRM_RADEON)+= radeon/
@@ -26,4 +27,3 @@
 obj-$(CONFIG_DRM_SIS)   += sis/
 obj-$(CONFIG_DRM_SAVAGE)+= savage/
 obj-$(CONFIG_DRM_VIA)	+=via/
-obj-$(CONFIG_DRM_TTM)	+= ttm/
diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
index 7d08352..80cc6d0 100644
--- a/drivers/gpu/drm/drm_edid.c
+++ b/drivers/gpu/drm/drm_edid.c
@@ -294,10 +294,10 @@
 	unsigned vactive = (pt->vactive_vblank_hi & 0xf0) << 4 | pt->vactive_lo;
 	unsigned hblank = (pt->hactive_hblank_hi & 0xf) << 8 | pt->hblank_lo;
 	unsigned vblank = (pt->vactive_vblank_hi & 0xf) << 8 | pt->vblank_lo;
-	unsigned hsync_offset = (pt->hsync_vsync_offset_pulse_width_hi & 0x3) << 8 | pt->hsync_offset_lo;
-	unsigned hsync_pulse_width = (pt->hsync_vsync_offset_pulse_width_hi & 0xc) << 6 | pt->hsync_pulse_width_lo;
-	unsigned vsync_offset = (pt->hsync_vsync_offset_pulse_width_hi & 0x30) | (pt->vsync_offset_pulse_width_lo & 0xf);
-	unsigned vsync_pulse_width = (pt->hsync_vsync_offset_pulse_width_hi & 0xc0) >> 2 | pt->vsync_offset_pulse_width_lo >> 4;
+	unsigned hsync_offset = (pt->hsync_vsync_offset_pulse_width_hi & 0xc0) << 2 | pt->hsync_offset_lo;
+	unsigned hsync_pulse_width = (pt->hsync_vsync_offset_pulse_width_hi & 0x30) << 4 | pt->hsync_pulse_width_lo;
+	unsigned vsync_offset = (pt->hsync_vsync_offset_pulse_width_hi & 0xc) >> 2 | pt->vsync_offset_pulse_width_lo >> 4;
+	unsigned vsync_pulse_width = (pt->hsync_vsync_offset_pulse_width_hi & 0x3) << 4 | (pt->vsync_offset_pulse_width_lo & 0xf);
 
 	/* ignore tiny modes */
 	if (hactive < 64 || vactive < 64)
@@ -347,8 +347,8 @@
 	mode->flags |= (pt->misc & DRM_EDID_PT_VSYNC_POSITIVE) ?
 		DRM_MODE_FLAG_PVSYNC : DRM_MODE_FLAG_NVSYNC;
 
-	mode->width_mm = pt->width_mm_lo | (pt->width_height_mm_hi & 0xf) << 8;
-	mode->height_mm = pt->height_mm_lo | (pt->width_height_mm_hi & 0xf0) << 4;
+	mode->width_mm = pt->width_mm_lo | (pt->width_height_mm_hi & 0xf0) << 4;
+	mode->height_mm = pt->height_mm_lo | (pt->width_height_mm_hi & 0xf) << 8;
 
 	if (quirks & EDID_QUIRK_DETAILED_IN_CM) {
 		mode->width_mm *= 10;
diff --git a/drivers/gpu/drm/i915/Makefile b/drivers/gpu/drm/i915/Makefile
index 51c5a05..30d6b99 100644
--- a/drivers/gpu/drm/i915/Makefile
+++ b/drivers/gpu/drm/i915/Makefile
@@ -13,6 +13,8 @@
 	  intel_crt.o \
 	  intel_lvds.o \
 	  intel_bios.o \
+	  intel_dp.o \
+	  intel_dp_i2c.o \
 	  intel_hdmi.o \
 	  intel_sdvo.o \
 	  intel_modes.o \
diff --git a/drivers/gpu/drm/i915/dvo.h b/drivers/gpu/drm/i915/dvo.h
index e747ac4..288fc50 100644
--- a/drivers/gpu/drm/i915/dvo.h
+++ b/drivers/gpu/drm/i915/dvo.h
@@ -37,7 +37,7 @@
 	/* GPIO register used for i2c bus to control this device */
 	u32 gpio;
 	int slave_addr;
-	struct intel_i2c_chan *i2c_bus;
+	struct i2c_adapter *i2c_bus;
 
 	const struct intel_dvo_dev_ops *dev_ops;
 	void *dev_priv;
@@ -52,7 +52,7 @@
 	 * Returns NULL if the device does not exist.
 	 */
 	bool (*init)(struct intel_dvo_device *dvo,
-		     struct intel_i2c_chan *i2cbus);
+		     struct i2c_adapter *i2cbus);
 
 	/*
 	 * Called to allow the output a chance to create properties after the
diff --git a/drivers/gpu/drm/i915/dvo_ch7017.c b/drivers/gpu/drm/i915/dvo_ch7017.c
index 03d4b49..621815b 100644
--- a/drivers/gpu/drm/i915/dvo_ch7017.c
+++ b/drivers/gpu/drm/i915/dvo_ch7017.c
@@ -176,19 +176,20 @@
 
 static bool ch7017_read(struct intel_dvo_device *dvo, int addr, uint8_t *val)
 {
-	struct intel_i2c_chan *i2cbus = dvo->i2c_bus;
+	struct i2c_adapter *adapter = dvo->i2c_bus;
+	struct intel_i2c_chan *i2cbus = container_of(adapter, struct intel_i2c_chan, adapter);
 	u8 out_buf[2];
 	u8 in_buf[2];
 
 	struct i2c_msg msgs[] = {
 		{
-			.addr = i2cbus->slave_addr,
+			.addr = dvo->slave_addr,
 			.flags = 0,
 			.len = 1,
 			.buf = out_buf,
 		},
 		{
-			.addr = i2cbus->slave_addr,
+			.addr = dvo->slave_addr,
 			.flags = I2C_M_RD,
 			.len = 1,
 			.buf = in_buf,
@@ -208,10 +209,11 @@
 
 static bool ch7017_write(struct intel_dvo_device *dvo, int addr, uint8_t val)
 {
-	struct intel_i2c_chan *i2cbus = dvo->i2c_bus;
+	struct i2c_adapter *adapter = dvo->i2c_bus;
+	struct intel_i2c_chan *i2cbus = container_of(adapter, struct intel_i2c_chan, adapter);
 	uint8_t out_buf[2];
 	struct i2c_msg msg = {
-		.addr = i2cbus->slave_addr,
+		.addr = dvo->slave_addr,
 		.flags = 0,
 		.len = 2,
 		.buf = out_buf,
@@ -228,8 +230,9 @@
 
 /** Probes for a CH7017 on the given bus and slave address. */
 static bool ch7017_init(struct intel_dvo_device *dvo,
-			struct intel_i2c_chan *i2cbus)
+			struct i2c_adapter *adapter)
 {
+	struct intel_i2c_chan *i2cbus = container_of(adapter, struct intel_i2c_chan, adapter);
 	struct ch7017_priv *priv;
 	uint8_t val;
 
@@ -237,8 +240,7 @@
 	if (priv == NULL)
 		return false;
 
-	dvo->i2c_bus = i2cbus;
-	dvo->i2c_bus->slave_addr = dvo->slave_addr;
+	dvo->i2c_bus = adapter;
 	dvo->dev_priv = priv;
 
 	if (!ch7017_read(dvo, CH7017_DEVICE_ID, &val))
@@ -248,7 +250,7 @@
 	    val != CH7018_DEVICE_ID_VALUE &&
 	    val != CH7019_DEVICE_ID_VALUE) {
 		DRM_DEBUG("ch701x not detected, got %d: from %s Slave %d.\n",
-			  val, i2cbus->adapter.name,i2cbus->slave_addr);
+			  val, i2cbus->adapter.name,dvo->slave_addr);
 		goto fail;
 	}
 
diff --git a/drivers/gpu/drm/i915/dvo_ch7xxx.c b/drivers/gpu/drm/i915/dvo_ch7xxx.c
index d2fd95d..a9b8962 100644
--- a/drivers/gpu/drm/i915/dvo_ch7xxx.c
+++ b/drivers/gpu/drm/i915/dvo_ch7xxx.c
@@ -123,19 +123,20 @@
 static bool ch7xxx_readb(struct intel_dvo_device *dvo, int addr, uint8_t *ch)
 {
 	struct ch7xxx_priv *ch7xxx= dvo->dev_priv;
-	struct intel_i2c_chan *i2cbus = dvo->i2c_bus;
+	struct i2c_adapter *adapter = dvo->i2c_bus;
+	struct intel_i2c_chan *i2cbus = container_of(adapter, struct intel_i2c_chan, adapter);
 	u8 out_buf[2];
 	u8 in_buf[2];
 
 	struct i2c_msg msgs[] = {
 		{
-			.addr = i2cbus->slave_addr,
+			.addr = dvo->slave_addr,
 			.flags = 0,
 			.len = 1,
 			.buf = out_buf,
 		},
 		{
-			.addr = i2cbus->slave_addr,
+			.addr = dvo->slave_addr,
 			.flags = I2C_M_RD,
 			.len = 1,
 			.buf = in_buf,
@@ -152,7 +153,7 @@
 
 	if (!ch7xxx->quiet) {
 		DRM_DEBUG("Unable to read register 0x%02x from %s:%02x.\n",
-			  addr, i2cbus->adapter.name, i2cbus->slave_addr);
+			  addr, i2cbus->adapter.name, dvo->slave_addr);
 	}
 	return false;
 }
@@ -161,10 +162,11 @@
 static bool ch7xxx_writeb(struct intel_dvo_device *dvo, int addr, uint8_t ch)
 {
 	struct ch7xxx_priv *ch7xxx = dvo->dev_priv;
-	struct intel_i2c_chan *i2cbus = dvo->i2c_bus;
+	struct i2c_adapter *adapter = dvo->i2c_bus;
+	struct intel_i2c_chan *i2cbus = container_of(adapter, struct intel_i2c_chan, adapter);
 	uint8_t out_buf[2];
 	struct i2c_msg msg = {
-		.addr = i2cbus->slave_addr,
+		.addr = dvo->slave_addr,
 		.flags = 0,
 		.len = 2,
 		.buf = out_buf,
@@ -178,14 +180,14 @@
 
 	if (!ch7xxx->quiet) {
 		DRM_DEBUG("Unable to write register 0x%02x to %s:%d.\n",
-			  addr, i2cbus->adapter.name, i2cbus->slave_addr);
+			  addr, i2cbus->adapter.name, dvo->slave_addr);
 	}
 
 	return false;
 }
 
 static bool ch7xxx_init(struct intel_dvo_device *dvo,
-			struct intel_i2c_chan *i2cbus)
+			struct i2c_adapter *adapter)
 {
 	/* this will detect the CH7xxx chip on the specified i2c bus */
 	struct ch7xxx_priv *ch7xxx;
@@ -196,8 +198,7 @@
 	if (ch7xxx == NULL)
 		return false;
 
-	dvo->i2c_bus = i2cbus;
-	dvo->i2c_bus->slave_addr = dvo->slave_addr;
+	dvo->i2c_bus = adapter;
 	dvo->dev_priv = ch7xxx;
 	ch7xxx->quiet = true;
 
@@ -207,7 +208,7 @@
 	name = ch7xxx_get_id(vendor);
 	if (!name) {
 		DRM_DEBUG("ch7xxx not detected; got 0x%02x from %s slave %d.\n",
-			  vendor, i2cbus->adapter.name, i2cbus->slave_addr);
+			  vendor, adapter->name, dvo->slave_addr);
 		goto out;
 	}
 
@@ -217,7 +218,7 @@
 
 	if (device != CH7xxx_DID) {
 		DRM_DEBUG("ch7xxx not detected; got 0x%02x from %s slave %d.\n",
-			  vendor, i2cbus->adapter.name, i2cbus->slave_addr);
+			  vendor, adapter->name, dvo->slave_addr);
 		goto out;
 	}
 
diff --git a/drivers/gpu/drm/i915/dvo_ivch.c b/drivers/gpu/drm/i915/dvo_ivch.c
index 0c8d375..aa176f9 100644
--- a/drivers/gpu/drm/i915/dvo_ivch.c
+++ b/drivers/gpu/drm/i915/dvo_ivch.c
@@ -169,13 +169,14 @@
 static bool ivch_read(struct intel_dvo_device *dvo, int addr, uint16_t *data)
 {
 	struct ivch_priv *priv = dvo->dev_priv;
-	struct intel_i2c_chan *i2cbus = dvo->i2c_bus;
+	struct i2c_adapter *adapter = dvo->i2c_bus;
+	struct intel_i2c_chan *i2cbus = container_of(adapter, struct intel_i2c_chan, adapter);
 	u8 out_buf[1];
 	u8 in_buf[2];
 
 	struct i2c_msg msgs[] = {
 		{
-			.addr = i2cbus->slave_addr,
+			.addr = dvo->slave_addr,
 			.flags = I2C_M_RD,
 			.len = 0,
 		},
@@ -186,7 +187,7 @@
 			.buf = out_buf,
 		},
 		{
-			.addr = i2cbus->slave_addr,
+			.addr = dvo->slave_addr,
 			.flags = I2C_M_RD | I2C_M_NOSTART,
 			.len = 2,
 			.buf = in_buf,
@@ -202,7 +203,7 @@
 
 	if (!priv->quiet) {
 		DRM_DEBUG("Unable to read register 0x%02x from %s:%02x.\n",
-			  addr, i2cbus->adapter.name, i2cbus->slave_addr);
+			  addr, i2cbus->adapter.name, dvo->slave_addr);
 	}
 	return false;
 }
@@ -211,10 +212,11 @@
 static bool ivch_write(struct intel_dvo_device *dvo, int addr, uint16_t data)
 {
 	struct ivch_priv *priv = dvo->dev_priv;
-	struct intel_i2c_chan *i2cbus = dvo->i2c_bus;
+	struct i2c_adapter *adapter = dvo->i2c_bus;
+	struct intel_i2c_chan *i2cbus = container_of(adapter, struct intel_i2c_chan, adapter);
 	u8 out_buf[3];
 	struct i2c_msg msg = {
-		.addr = i2cbus->slave_addr,
+		.addr = dvo->slave_addr,
 		.flags = 0,
 		.len = 3,
 		.buf = out_buf,
@@ -229,7 +231,7 @@
 
 	if (!priv->quiet) {
 		DRM_DEBUG("Unable to write register 0x%02x to %s:%d.\n",
-			  addr, i2cbus->adapter.name, i2cbus->slave_addr);
+			  addr, i2cbus->adapter.name, dvo->slave_addr);
 	}
 
 	return false;
@@ -237,7 +239,7 @@
 
 /** Probes the given bus and slave address for an ivch */
 static bool ivch_init(struct intel_dvo_device *dvo,
-		      struct intel_i2c_chan *i2cbus)
+		      struct i2c_adapter *adapter)
 {
 	struct ivch_priv *priv;
 	uint16_t temp;
@@ -246,8 +248,7 @@
 	if (priv == NULL)
 		return false;
 
-	dvo->i2c_bus = i2cbus;
-	dvo->i2c_bus->slave_addr = dvo->slave_addr;
+	dvo->i2c_bus = adapter;
 	dvo->dev_priv = priv;
 	priv->quiet = true;
 
diff --git a/drivers/gpu/drm/i915/dvo_sil164.c b/drivers/gpu/drm/i915/dvo_sil164.c
index 033a4bb..e1c1f73 100644
--- a/drivers/gpu/drm/i915/dvo_sil164.c
+++ b/drivers/gpu/drm/i915/dvo_sil164.c
@@ -76,19 +76,20 @@
 static bool sil164_readb(struct intel_dvo_device *dvo, int addr, uint8_t *ch)
 {
 	struct sil164_priv *sil = dvo->dev_priv;
-	struct intel_i2c_chan *i2cbus = dvo->i2c_bus;
+	struct i2c_adapter *adapter = dvo->i2c_bus;
+	struct intel_i2c_chan *i2cbus = container_of(adapter, struct intel_i2c_chan, adapter);
 	u8 out_buf[2];
 	u8 in_buf[2];
 
 	struct i2c_msg msgs[] = {
 		{
-			.addr = i2cbus->slave_addr,
+			.addr = dvo->slave_addr,
 			.flags = 0,
 			.len = 1,
 			.buf = out_buf,
 		},
 		{
-			.addr = i2cbus->slave_addr,
+			.addr = dvo->slave_addr,
 			.flags = I2C_M_RD,
 			.len = 1,
 			.buf = in_buf,
@@ -105,7 +106,7 @@
 
 	if (!sil->quiet) {
 		DRM_DEBUG("Unable to read register 0x%02x from %s:%02x.\n",
-			  addr, i2cbus->adapter.name, i2cbus->slave_addr);
+			  addr, i2cbus->adapter.name, dvo->slave_addr);
 	}
 	return false;
 }
@@ -113,10 +114,11 @@
 static bool sil164_writeb(struct intel_dvo_device *dvo, int addr, uint8_t ch)
 {
 	struct sil164_priv *sil= dvo->dev_priv;
-	struct intel_i2c_chan *i2cbus = dvo->i2c_bus;
+	struct i2c_adapter *adapter = dvo->i2c_bus;
+	struct intel_i2c_chan *i2cbus = container_of(adapter, struct intel_i2c_chan, adapter);
 	uint8_t out_buf[2];
 	struct i2c_msg msg = {
-		.addr = i2cbus->slave_addr,
+		.addr = dvo->slave_addr,
 		.flags = 0,
 		.len = 2,
 		.buf = out_buf,
@@ -130,7 +132,7 @@
 
 	if (!sil->quiet) {
 		DRM_DEBUG("Unable to write register 0x%02x to %s:%d.\n",
-			  addr, i2cbus->adapter.name, i2cbus->slave_addr);
+			  addr, i2cbus->adapter.name, dvo->slave_addr);
 	}
 
 	return false;
@@ -138,7 +140,7 @@
 
 /* Silicon Image 164 driver for chip on i2c bus */
 static bool sil164_init(struct intel_dvo_device *dvo,
-			struct intel_i2c_chan *i2cbus)
+			struct i2c_adapter *adapter)
 {
 	/* this will detect the SIL164 chip on the specified i2c bus */
 	struct sil164_priv *sil;
@@ -148,8 +150,7 @@
 	if (sil == NULL)
 		return false;
 
-	dvo->i2c_bus = i2cbus;
-	dvo->i2c_bus->slave_addr = dvo->slave_addr;
+	dvo->i2c_bus = adapter;
 	dvo->dev_priv = sil;
 	sil->quiet = true;
 
@@ -158,7 +159,7 @@
 
 	if (ch != (SIL164_VID & 0xff)) {
 		DRM_DEBUG("sil164 not detected got %d: from %s Slave %d.\n",
-			  ch, i2cbus->adapter.name, i2cbus->slave_addr);
+			  ch, adapter->name, dvo->slave_addr);
 		goto out;
 	}
 
@@ -167,7 +168,7 @@
 
 	if (ch != (SIL164_DID & 0xff)) {
 		DRM_DEBUG("sil164 not detected got %d: from %s Slave %d.\n",
-			  ch, i2cbus->adapter.name, i2cbus->slave_addr);
+			  ch, adapter->name, dvo->slave_addr);
 		goto out;
 	}
 	sil->quiet = false;
diff --git a/drivers/gpu/drm/i915/dvo_tfp410.c b/drivers/gpu/drm/i915/dvo_tfp410.c
index 207fda8..9ecc907 100644
--- a/drivers/gpu/drm/i915/dvo_tfp410.c
+++ b/drivers/gpu/drm/i915/dvo_tfp410.c
@@ -101,19 +101,20 @@
 static bool tfp410_readb(struct intel_dvo_device *dvo, int addr, uint8_t *ch)
 {
 	struct tfp410_priv *tfp = dvo->dev_priv;
-	struct intel_i2c_chan *i2cbus = dvo->i2c_bus;
+	struct i2c_adapter *adapter = dvo->i2c_bus;
+	struct intel_i2c_chan *i2cbus = container_of(adapter, struct intel_i2c_chan, adapter);
 	u8 out_buf[2];
 	u8 in_buf[2];
 
 	struct i2c_msg msgs[] = {
 		{
-			.addr = i2cbus->slave_addr,
+			.addr = dvo->slave_addr,
 			.flags = 0,
 			.len = 1,
 			.buf = out_buf,
 		},
 		{
-			.addr = i2cbus->slave_addr,
+			.addr = dvo->slave_addr,
 			.flags = I2C_M_RD,
 			.len = 1,
 			.buf = in_buf,
@@ -130,7 +131,7 @@
 
 	if (!tfp->quiet) {
 		DRM_DEBUG("Unable to read register 0x%02x from %s:%02x.\n",
-			  addr, i2cbus->adapter.name, i2cbus->slave_addr);
+			  addr, i2cbus->adapter.name, dvo->slave_addr);
 	}
 	return false;
 }
@@ -138,10 +139,11 @@
 static bool tfp410_writeb(struct intel_dvo_device *dvo, int addr, uint8_t ch)
 {
 	struct tfp410_priv *tfp = dvo->dev_priv;
-	struct intel_i2c_chan *i2cbus = dvo->i2c_bus;
+	struct i2c_adapter *adapter = dvo->i2c_bus;
+	struct intel_i2c_chan *i2cbus = container_of(adapter, struct intel_i2c_chan, adapter);
 	uint8_t out_buf[2];
 	struct i2c_msg msg = {
-		.addr = i2cbus->slave_addr,
+		.addr = dvo->slave_addr,
 		.flags = 0,
 		.len = 2,
 		.buf = out_buf,
@@ -155,7 +157,7 @@
 
 	if (!tfp->quiet) {
 		DRM_DEBUG("Unable to write register 0x%02x to %s:%d.\n",
-			  addr, i2cbus->adapter.name, i2cbus->slave_addr);
+			  addr, i2cbus->adapter.name, dvo->slave_addr);
 	}
 
 	return false;
@@ -174,7 +176,7 @@
 
 /* Ti TFP410 driver for chip on i2c bus */
 static bool tfp410_init(struct intel_dvo_device *dvo,
-			struct intel_i2c_chan *i2cbus)
+			struct i2c_adapter *adapter)
 {
 	/* this will detect the tfp410 chip on the specified i2c bus */
 	struct tfp410_priv *tfp;
@@ -184,20 +186,19 @@
 	if (tfp == NULL)
 		return false;
 
-	dvo->i2c_bus = i2cbus;
-	dvo->i2c_bus->slave_addr = dvo->slave_addr;
+	dvo->i2c_bus = adapter;
 	dvo->dev_priv = tfp;
 	tfp->quiet = true;
 
 	if ((id = tfp410_getid(dvo, TFP410_VID_LO)) != TFP410_VID) {
 		DRM_DEBUG("tfp410 not detected got VID %X: from %s Slave %d.\n",
-			  id, i2cbus->adapter.name, i2cbus->slave_addr);
+			  id, adapter->name, dvo->slave_addr);
 		goto out;
 	}
 
 	if ((id = tfp410_getid(dvo, TFP410_DID_LO)) != TFP410_DID) {
 		DRM_DEBUG("tfp410 not detected got DID %X: from %s Slave %d.\n",
-			  id, i2cbus->adapter.name, i2cbus->slave_addr);
+			  id, adapter->name, dvo->slave_addr);
 		goto out;
 	}
 	tfp->quiet = false;
diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index 98560e1..e3cb402 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -67,8 +67,6 @@
 
 	pci_save_state(dev->pdev);
 
-	i915_save_state(dev);
-
 	/* If KMS is active, we do the leavevt stuff here */
 	if (drm_core_check_feature(dev, DRIVER_MODESET)) {
 		if (i915_gem_idle(dev))
@@ -77,6 +75,8 @@
 		drm_irq_uninstall(dev);
 	}
 
+	i915_save_state(dev);
+
 	intel_opregion_free(dev, 1);
 
 	if (state.event == PM_EVENT_SUSPEND) {
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 7a84f04..bb4c2d3 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -306,6 +306,17 @@
 	u32 saveCURBPOS;
 	u32 saveCURBBASE;
 	u32 saveCURSIZE;
+	u32 saveDP_B;
+	u32 saveDP_C;
+	u32 saveDP_D;
+	u32 savePIPEA_GMCH_DATA_M;
+	u32 savePIPEB_GMCH_DATA_M;
+	u32 savePIPEA_GMCH_DATA_N;
+	u32 savePIPEB_GMCH_DATA_N;
+	u32 savePIPEA_DP_LINK_M;
+	u32 savePIPEB_DP_LINK_M;
+	u32 savePIPEA_DP_LINK_N;
+	u32 savePIPEB_DP_LINK_N;
 
 	struct {
 		struct drm_mm gtt_space;
@@ -857,6 +868,7 @@
 #define HAS_128_BYTE_Y_TILING(dev) (IS_I9XX(dev) && !(IS_I915G(dev) || \
 						      IS_I915GM(dev)))
 #define SUPPORTS_INTEGRATED_HDMI(dev)	(IS_G4X(dev) || IS_IGDNG(dev))
+#define SUPPORTS_INTEGRATED_DP(dev)	(IS_G4X(dev) || IS_IGDNG(dev))
 #define I915_HAS_HOTPLUG(dev) (IS_I945G(dev) || IS_I945GM(dev) || IS_I965G(dev))
 
 #define PRIMARY_RINGBUFFER_SIZE         (128*1024)
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index fd2b8bd..876b65c 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -1006,7 +1006,7 @@
 
 	mutex_lock(&dev->struct_mutex);
 #if WATCH_BUF
-	DRM_INFO("set_domain_ioctl %p(%d), %08x %08x\n",
+	DRM_INFO("set_domain_ioctl %p(%zd), %08x %08x\n",
 		 obj, obj->size, read_domains, write_domain);
 #endif
 	if (read_domains & I915_GEM_DOMAIN_GTT) {
@@ -1050,7 +1050,7 @@
 	}
 
 #if WATCH_BUF
-	DRM_INFO("%s: sw_finish %d (%p %d)\n",
+	DRM_INFO("%s: sw_finish %d (%p %zd)\n",
 		 __func__, args->handle, obj, obj->size);
 #endif
 	obj_priv = obj->driver_private;
@@ -2423,7 +2423,7 @@
 	}
 
 #if WATCH_BUF
-	DRM_INFO("Binding object of size %d at 0x%08x\n",
+	DRM_INFO("Binding object of size %zd at 0x%08x\n",
 		 obj->size, obj_priv->gtt_offset);
 #endif
 	ret = i915_gem_object_get_pages(obj);
@@ -4227,6 +4227,7 @@
 void
 i915_gem_load(struct drm_device *dev)
 {
+	int i;
 	drm_i915_private_t *dev_priv = dev->dev_private;
 
 	spin_lock_init(&dev_priv->mm.active_list_lock);
@@ -4246,6 +4247,18 @@
 	else
 		dev_priv->num_fence_regs = 8;
 
+	/* Initialize fence registers to zero */
+	if (IS_I965G(dev)) {
+		for (i = 0; i < 16; i++)
+			I915_WRITE64(FENCE_REG_965_0 + (i * 8), 0);
+	} else {
+		for (i = 0; i < 8; i++)
+			I915_WRITE(FENCE_REG_830_0 + (i * 4), 0);
+		if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev))
+			for (i = 0; i < 8; i++)
+				I915_WRITE(FENCE_REG_945_8 + (i * 4), 0);
+	}
+
 	i915_gem_detect_bit_6_swizzle(dev);
 }
 
diff --git a/drivers/gpu/drm/i915/i915_gem_debug.c b/drivers/gpu/drm/i915/i915_gem_debug.c
index 8d0b943..e602614 100644
--- a/drivers/gpu/drm/i915/i915_gem_debug.c
+++ b/drivers/gpu/drm/i915/i915_gem_debug.c
@@ -87,7 +87,7 @@
 			chunk_len = page_len - chunk;
 			if (chunk_len > 128)
 				chunk_len = 128;
-			i915_gem_dump_page(obj_priv->page_list[page],
+			i915_gem_dump_page(obj_priv->pages[page],
 					   chunk, chunk + chunk_len,
 					   obj_priv->gtt_offset +
 					   page * PAGE_SIZE,
@@ -143,7 +143,7 @@
 	uint32_t *backing_map = NULL;
 	int bad_count = 0;
 
-	DRM_INFO("%s: checking coherency of object %p@0x%08x (%d, %dkb):\n",
+	DRM_INFO("%s: checking coherency of object %p@0x%08x (%d, %zdkb):\n",
 		 __func__, obj, obj_priv->gtt_offset, handle,
 		 obj->size / 1024);
 
@@ -157,7 +157,7 @@
 	for (page = 0; page < obj->size / PAGE_SIZE; page++) {
 		int i;
 
-		backing_map = kmap_atomic(obj_priv->page_list[page], KM_USER0);
+		backing_map = kmap_atomic(obj_priv->pages[page], KM_USER0);
 
 		if (backing_map == NULL) {
 			DRM_ERROR("failed to map backing page\n");
diff --git a/drivers/gpu/drm/i915/i915_gem_tiling.c b/drivers/gpu/drm/i915/i915_gem_tiling.c
index 5c1ceec..daeae62 100644
--- a/drivers/gpu/drm/i915/i915_gem_tiling.c
+++ b/drivers/gpu/drm/i915/i915_gem_tiling.c
@@ -114,11 +114,13 @@
 	mchbar_addr = ((u64)temp_hi << 32) | temp_lo;
 
 	/* If ACPI doesn't have it, assume we need to allocate it ourselves */
+#ifdef CONFIG_PNP
 	if (mchbar_addr &&
 	    pnp_range_reserved(mchbar_addr, mchbar_addr + MCHBAR_SIZE)) {
 		ret = 0;
 		goto out_put;
 	}
+#endif
 
 	/* Get some space for it */
 	ret = pci_bus_alloc_resource(bridge_dev->bus, &dev_priv->mch_res,
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index b86b7b7..228546f 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -232,7 +232,17 @@
 	drm_i915_private_t *dev_priv = container_of(work, drm_i915_private_t,
 						    hotplug_work);
 	struct drm_device *dev = dev_priv->dev;
+	struct drm_mode_config *mode_config = &dev->mode_config;
+	struct drm_connector *connector;
 
+	if (mode_config->num_connector) {
+		list_for_each_entry(connector, &mode_config->connector_list, head) {
+			struct intel_output *intel_output = to_intel_output(connector);
+	
+			if (intel_output->hot_plug)
+				(*intel_output->hot_plug) (intel_output);
+		}
+	}
 	/* Just fire off a uevent and let userspace tell us what to do */
 	drm_sysfs_hotplug_event(dev);
 }
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index f6237a0..88bf752 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -569,6 +569,19 @@
 #define C0DRB3			0x10206
 #define C1DRB3			0x10606
 
+/* Clocking configuration register */
+#define CLKCFG			0x10c00
+#define CLKCFG_FSB_400					(0 << 0)	/* hrawclk 100 */
+#define CLKCFG_FSB_533					(1 << 0)	/* hrawclk 133 */
+#define CLKCFG_FSB_667					(3 << 0)	/* hrawclk 166 */
+#define CLKCFG_FSB_800					(2 << 0)	/* hrawclk 200 */
+#define CLKCFG_FSB_1067					(6 << 0)	/* hrawclk 266 */
+#define CLKCFG_FSB_1333					(7 << 0)	/* hrawclk 333 */
+/* this is a guess, could be 5 as well */
+#define CLKCFG_FSB_1600					(4 << 0)	/* hrawclk 400 */
+#define CLKCFG_FSB_1600_ALT				(5 << 0)	/* hrawclk 400 */
+#define CLKCFG_FSB_MASK					(7 << 0)
+ 
 /** GM965 GM45 render standby register */
 #define MCHBAR_RENDER_STANDBY	0x111B8
 
@@ -834,9 +847,25 @@
 #define   HORIZ_INTERP_MASK	(3 << 6)
 #define   HORIZ_AUTO_SCALE	(1 << 5)
 #define   PANEL_8TO6_DITHER_ENABLE (1 << 3)
+#define   PFIT_FILTER_FUZZY	(0 << 24)
+#define   PFIT_SCALING_AUTO	(0 << 26)
+#define   PFIT_SCALING_PROGRAMMED (1 << 26)
+#define   PFIT_SCALING_PILLAR	(2 << 26)
+#define   PFIT_SCALING_LETTER	(3 << 26)
 #define PFIT_PGM_RATIOS	0x61234
 #define   PFIT_VERT_SCALE_MASK			0xfff00000
 #define   PFIT_HORIZ_SCALE_MASK			0x0000fff0
+/* Pre-965 */
+#define		PFIT_VERT_SCALE_SHIFT		20
+#define		PFIT_VERT_SCALE_MASK		0xfff00000
+#define		PFIT_HORIZ_SCALE_SHIFT		4
+#define		PFIT_HORIZ_SCALE_MASK		0x0000fff0
+/* 965+ */
+#define		PFIT_VERT_SCALE_SHIFT_965	16
+#define		PFIT_VERT_SCALE_MASK_965	0x1fff0000
+#define		PFIT_HORIZ_SCALE_SHIFT_965	0
+#define		PFIT_HORIZ_SCALE_MASK_965	0x00001fff
+
 #define PFIT_AUTO_RATIOS 0x61238
 
 /* Backlight control */
diff --git a/drivers/gpu/drm/i915/i915_suspend.c b/drivers/gpu/drm/i915/i915_suspend.c
index a98e283..8d8e083 100644
--- a/drivers/gpu/drm/i915/i915_suspend.c
+++ b/drivers/gpu/drm/i915/i915_suspend.c
@@ -322,6 +322,20 @@
 	dev_priv->savePP_OFF_DELAYS = I915_READ(PP_OFF_DELAYS);
 	dev_priv->savePP_DIVISOR = I915_READ(PP_DIVISOR);
 
+	/* Display Port state */
+	if (SUPPORTS_INTEGRATED_DP(dev)) {
+		dev_priv->saveDP_B = I915_READ(DP_B);
+		dev_priv->saveDP_C = I915_READ(DP_C);
+		dev_priv->saveDP_D = I915_READ(DP_D);
+		dev_priv->savePIPEA_GMCH_DATA_M = I915_READ(PIPEA_GMCH_DATA_M);
+		dev_priv->savePIPEB_GMCH_DATA_M = I915_READ(PIPEB_GMCH_DATA_M);
+		dev_priv->savePIPEA_GMCH_DATA_N = I915_READ(PIPEA_GMCH_DATA_N);
+		dev_priv->savePIPEB_GMCH_DATA_N = I915_READ(PIPEB_GMCH_DATA_N);
+		dev_priv->savePIPEA_DP_LINK_M = I915_READ(PIPEA_DP_LINK_M);
+		dev_priv->savePIPEB_DP_LINK_M = I915_READ(PIPEB_DP_LINK_M);
+		dev_priv->savePIPEA_DP_LINK_N = I915_READ(PIPEA_DP_LINK_N);
+		dev_priv->savePIPEB_DP_LINK_N = I915_READ(PIPEB_DP_LINK_N);
+	}
 	/* FIXME: save TV & SDVO state */
 
 	/* FBC state */
@@ -404,7 +418,19 @@
 			for (i = 0; i < 8; i++)
 				I915_WRITE(FENCE_REG_945_8 + (i * 4), dev_priv->saveFENCE[i+8]);
 	}
-
+	
+	/* Display port ratios (must be done before clock is set) */
+	if (SUPPORTS_INTEGRATED_DP(dev)) {
+		I915_WRITE(PIPEA_GMCH_DATA_M, dev_priv->savePIPEA_GMCH_DATA_M);
+		I915_WRITE(PIPEB_GMCH_DATA_M, dev_priv->savePIPEB_GMCH_DATA_M);
+		I915_WRITE(PIPEA_GMCH_DATA_N, dev_priv->savePIPEA_GMCH_DATA_N);
+		I915_WRITE(PIPEB_GMCH_DATA_N, dev_priv->savePIPEB_GMCH_DATA_N);
+		I915_WRITE(PIPEA_DP_LINK_M, dev_priv->savePIPEA_DP_LINK_M);
+		I915_WRITE(PIPEB_DP_LINK_M, dev_priv->savePIPEB_DP_LINK_M);
+		I915_WRITE(PIPEA_DP_LINK_N, dev_priv->savePIPEA_DP_LINK_N);
+		I915_WRITE(PIPEB_DP_LINK_N, dev_priv->savePIPEB_DP_LINK_N);
+	}
+	
 	/* Pipe & plane A info */
 	/* Prime the clock */
 	if (dev_priv->saveDPLL_A & DPLL_VCO_ENABLE) {
@@ -518,6 +544,12 @@
 	I915_WRITE(PP_DIVISOR, dev_priv->savePP_DIVISOR);
 	I915_WRITE(PP_CONTROL, dev_priv->savePP_CONTROL);
 
+	/* Display Port state */
+	if (SUPPORTS_INTEGRATED_DP(dev)) {
+		I915_WRITE(DP_B, dev_priv->saveDP_B);
+		I915_WRITE(DP_C, dev_priv->saveDP_C);
+		I915_WRITE(DP_D, dev_priv->saveDP_D);
+	}
 	/* FIXME: restore TV & SDVO state */
 
 	/* FBC info */
diff --git a/drivers/gpu/drm/i915/intel_bios.c b/drivers/gpu/drm/i915/intel_bios.c
index cdd126d..716409a 100644
--- a/drivers/gpu/drm/i915/intel_bios.c
+++ b/drivers/gpu/drm/i915/intel_bios.c
@@ -99,9 +99,11 @@
 {
 	struct bdb_lvds_options *lvds_options;
 	struct bdb_lvds_lfp_data *lvds_lfp_data;
+	struct bdb_lvds_lfp_data_ptrs *lvds_lfp_data_ptrs;
 	struct bdb_lvds_lfp_data_entry *entry;
 	struct lvds_dvo_timing *dvo_timing;
 	struct drm_display_mode *panel_fixed_mode;
+	int lfp_data_size;
 
 	/* Defaults if we can't find VBT info */
 	dev_priv->lvds_dither = 0;
@@ -119,9 +121,17 @@
 	if (!lvds_lfp_data)
 		return;
 
+	lvds_lfp_data_ptrs = find_section(bdb, BDB_LVDS_LFP_DATA_PTRS);
+	if (!lvds_lfp_data_ptrs)
+		return;
+
 	dev_priv->lvds_vbt = 1;
 
-	entry = &lvds_lfp_data->data[lvds_options->panel_type];
+	lfp_data_size = lvds_lfp_data_ptrs->ptr[1].dvo_timing_offset -
+		lvds_lfp_data_ptrs->ptr[0].dvo_timing_offset;
+	entry = (struct bdb_lvds_lfp_data_entry *)
+		((uint8_t *)lvds_lfp_data->data + (lfp_data_size *
+						   lvds_options->panel_type));
 	dvo_timing = &entry->dvo_timing;
 
 	panel_fixed_mode = kzalloc(sizeof(*panel_fixed_mode), GFP_KERNEL);
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 3e1c781..73e7b9c 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -29,6 +29,7 @@
 #include "intel_drv.h"
 #include "i915_drm.h"
 #include "i915_drv.h"
+#include "intel_dp.h"
 
 #include "drm_crtc_helper.h"
 
@@ -127,19 +128,6 @@
 #define I9XX_P2_LVDS_FAST		      7
 #define I9XX_P2_LVDS_SLOW_LIMIT		 112000
 
-#define INTEL_LIMIT_I8XX_DVO_DAC    0
-#define INTEL_LIMIT_I8XX_LVDS	    1
-#define INTEL_LIMIT_I9XX_SDVO_DAC   2
-#define INTEL_LIMIT_I9XX_LVDS	    3
-#define INTEL_LIMIT_G4X_SDVO	    4
-#define INTEL_LIMIT_G4X_HDMI_DAC   5
-#define INTEL_LIMIT_G4X_SINGLE_CHANNEL_LVDS   6
-#define INTEL_LIMIT_G4X_DUAL_CHANNEL_LVDS   7
-#define INTEL_LIMIT_IGD_SDVO_DAC    8
-#define INTEL_LIMIT_IGD_LVDS	    9
-#define INTEL_LIMIT_IGDNG_SDVO_DAC  10
-#define INTEL_LIMIT_IGDNG_LVDS	    11
-
 /*The parameter is for SDVO on G4x platform*/
 #define G4X_DOT_SDVO_MIN           25000
 #define G4X_DOT_SDVO_MAX           270000
@@ -218,6 +206,25 @@
 #define G4X_P2_DUAL_CHANNEL_LVDS_FAST           7
 #define G4X_P2_DUAL_CHANNEL_LVDS_LIMIT          0
 
+/*The parameter is for DISPLAY PORT on G4x platform*/
+#define G4X_DOT_DISPLAY_PORT_MIN           161670
+#define G4X_DOT_DISPLAY_PORT_MAX           227000
+#define G4X_N_DISPLAY_PORT_MIN             1
+#define G4X_N_DISPLAY_PORT_MAX             2
+#define G4X_M_DISPLAY_PORT_MIN             97
+#define G4X_M_DISPLAY_PORT_MAX             108
+#define G4X_M1_DISPLAY_PORT_MIN            0x10
+#define G4X_M1_DISPLAY_PORT_MAX            0x12
+#define G4X_M2_DISPLAY_PORT_MIN            0x05
+#define G4X_M2_DISPLAY_PORT_MAX            0x06
+#define G4X_P_DISPLAY_PORT_MIN             10
+#define G4X_P_DISPLAY_PORT_MAX             20
+#define G4X_P1_DISPLAY_PORT_MIN            1
+#define G4X_P1_DISPLAY_PORT_MAX            2
+#define G4X_P2_DISPLAY_PORT_SLOW           10
+#define G4X_P2_DISPLAY_PORT_FAST           10
+#define G4X_P2_DISPLAY_PORT_LIMIT          0
+
 /* IGDNG */
 /* as we calculate clock using (register_value + 2) for
    N/M1/M2, so here the range value for them is (actual_value-2).
@@ -256,8 +263,11 @@
 intel_igdng_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
 			int target, int refclk, intel_clock_t *best_clock);
 
-static const intel_limit_t intel_limits[] = {
-    { /* INTEL_LIMIT_I8XX_DVO_DAC */
+static bool
+intel_find_pll_g4x_dp(const intel_limit_t *, struct drm_crtc *crtc,
+		      int target, int refclk, intel_clock_t *best_clock);
+
+static const intel_limit_t intel_limits_i8xx_dvo = {
         .dot = { .min = I8XX_DOT_MIN,		.max = I8XX_DOT_MAX },
         .vco = { .min = I8XX_VCO_MIN,		.max = I8XX_VCO_MAX },
         .n   = { .min = I8XX_N_MIN,		.max = I8XX_N_MAX },
@@ -269,8 +279,9 @@
 	.p2  = { .dot_limit = I8XX_P2_SLOW_LIMIT,
 		 .p2_slow = I8XX_P2_SLOW,	.p2_fast = I8XX_P2_FAST },
 	.find_pll = intel_find_best_PLL,
-    },
-    { /* INTEL_LIMIT_I8XX_LVDS */
+};
+
+static const intel_limit_t intel_limits_i8xx_lvds = {
         .dot = { .min = I8XX_DOT_MIN,		.max = I8XX_DOT_MAX },
         .vco = { .min = I8XX_VCO_MIN,		.max = I8XX_VCO_MAX },
         .n   = { .min = I8XX_N_MIN,		.max = I8XX_N_MAX },
@@ -282,8 +293,9 @@
 	.p2  = { .dot_limit = I8XX_P2_SLOW_LIMIT,
 		 .p2_slow = I8XX_P2_LVDS_SLOW,	.p2_fast = I8XX_P2_LVDS_FAST },
 	.find_pll = intel_find_best_PLL,
-    },
-    { /* INTEL_LIMIT_I9XX_SDVO_DAC */
+};
+	
+static const intel_limit_t intel_limits_i9xx_sdvo = {
         .dot = { .min = I9XX_DOT_MIN,		.max = I9XX_DOT_MAX },
         .vco = { .min = I9XX_VCO_MIN,		.max = I9XX_VCO_MAX },
         .n   = { .min = I9XX_N_MIN,		.max = I9XX_N_MAX },
@@ -295,8 +307,9 @@
 	.p2  = { .dot_limit = I9XX_P2_SDVO_DAC_SLOW_LIMIT,
 		 .p2_slow = I9XX_P2_SDVO_DAC_SLOW,	.p2_fast = I9XX_P2_SDVO_DAC_FAST },
 	.find_pll = intel_find_best_PLL,
-    },
-    { /* INTEL_LIMIT_I9XX_LVDS */
+};
+
+static const intel_limit_t intel_limits_i9xx_lvds = {
         .dot = { .min = I9XX_DOT_MIN,		.max = I9XX_DOT_MAX },
         .vco = { .min = I9XX_VCO_MIN,		.max = I9XX_VCO_MAX },
         .n   = { .min = I9XX_N_MIN,		.max = I9XX_N_MAX },
@@ -311,9 +324,10 @@
 	.p2  = { .dot_limit = I9XX_P2_LVDS_SLOW_LIMIT,
 		 .p2_slow = I9XX_P2_LVDS_SLOW,	.p2_fast = I9XX_P2_LVDS_FAST },
 	.find_pll = intel_find_best_PLL,
-    },
+};
+
     /* below parameter and function is for G4X Chipset Family*/
-    { /* INTEL_LIMIT_G4X_SDVO */
+static const intel_limit_t intel_limits_g4x_sdvo = {
 	.dot = { .min = G4X_DOT_SDVO_MIN,	.max = G4X_DOT_SDVO_MAX },
 	.vco = { .min = G4X_VCO_MIN,	        .max = G4X_VCO_MAX},
 	.n   = { .min = G4X_N_SDVO_MIN,	        .max = G4X_N_SDVO_MAX },
@@ -327,8 +341,9 @@
 		 .p2_fast = G4X_P2_SDVO_FAST
 	},
 	.find_pll = intel_g4x_find_best_PLL,
-    },
-    { /* INTEL_LIMIT_G4X_HDMI_DAC */
+};
+
+static const intel_limit_t intel_limits_g4x_hdmi = {
 	.dot = { .min = G4X_DOT_HDMI_DAC_MIN,	.max = G4X_DOT_HDMI_DAC_MAX },
 	.vco = { .min = G4X_VCO_MIN,	        .max = G4X_VCO_MAX},
 	.n   = { .min = G4X_N_HDMI_DAC_MIN,	.max = G4X_N_HDMI_DAC_MAX },
@@ -342,8 +357,9 @@
 		 .p2_fast = G4X_P2_HDMI_DAC_FAST
 	},
 	.find_pll = intel_g4x_find_best_PLL,
-    },
-    { /* INTEL_LIMIT_G4X_SINGLE_CHANNEL_LVDS */
+};
+
+static const intel_limit_t intel_limits_g4x_single_channel_lvds = {
 	.dot = { .min = G4X_DOT_SINGLE_CHANNEL_LVDS_MIN,
 		 .max = G4X_DOT_SINGLE_CHANNEL_LVDS_MAX },
 	.vco = { .min = G4X_VCO_MIN,
@@ -365,8 +381,9 @@
 		 .p2_fast = G4X_P2_SINGLE_CHANNEL_LVDS_FAST
 	},
 	.find_pll = intel_g4x_find_best_PLL,
-    },
-    { /* INTEL_LIMIT_G4X_DUAL_CHANNEL_LVDS */
+};
+
+static const intel_limit_t intel_limits_g4x_dual_channel_lvds = {
 	.dot = { .min = G4X_DOT_DUAL_CHANNEL_LVDS_MIN,
 		 .max = G4X_DOT_DUAL_CHANNEL_LVDS_MAX },
 	.vco = { .min = G4X_VCO_MIN,
@@ -388,8 +405,32 @@
 		 .p2_fast = G4X_P2_DUAL_CHANNEL_LVDS_FAST
 	},
 	.find_pll = intel_g4x_find_best_PLL,
-    },
-    { /* INTEL_LIMIT_IGD_SDVO */
+};
+
+static const intel_limit_t intel_limits_g4x_display_port = {
+        .dot = { .min = G4X_DOT_DISPLAY_PORT_MIN,
+                 .max = G4X_DOT_DISPLAY_PORT_MAX },
+        .vco = { .min = G4X_VCO_MIN,
+                 .max = G4X_VCO_MAX},
+        .n   = { .min = G4X_N_DISPLAY_PORT_MIN,
+                 .max = G4X_N_DISPLAY_PORT_MAX },
+        .m   = { .min = G4X_M_DISPLAY_PORT_MIN,
+                 .max = G4X_M_DISPLAY_PORT_MAX },
+        .m1  = { .min = G4X_M1_DISPLAY_PORT_MIN,
+                 .max = G4X_M1_DISPLAY_PORT_MAX },
+        .m2  = { .min = G4X_M2_DISPLAY_PORT_MIN,
+                 .max = G4X_M2_DISPLAY_PORT_MAX },
+        .p   = { .min = G4X_P_DISPLAY_PORT_MIN,
+                 .max = G4X_P_DISPLAY_PORT_MAX },
+        .p1  = { .min = G4X_P1_DISPLAY_PORT_MIN,
+                 .max = G4X_P1_DISPLAY_PORT_MAX},
+        .p2  = { .dot_limit = G4X_P2_DISPLAY_PORT_LIMIT,
+                 .p2_slow = G4X_P2_DISPLAY_PORT_SLOW,
+                 .p2_fast = G4X_P2_DISPLAY_PORT_FAST },
+        .find_pll = intel_find_pll_g4x_dp,
+};
+
+static const intel_limit_t intel_limits_igd_sdvo = {
         .dot = { .min = I9XX_DOT_MIN,		.max = I9XX_DOT_MAX},
         .vco = { .min = IGD_VCO_MIN,		.max = IGD_VCO_MAX },
         .n   = { .min = IGD_N_MIN,		.max = IGD_N_MAX },
@@ -401,8 +442,9 @@
 	.p2  = { .dot_limit = I9XX_P2_SDVO_DAC_SLOW_LIMIT,
 		 .p2_slow = I9XX_P2_SDVO_DAC_SLOW,	.p2_fast = I9XX_P2_SDVO_DAC_FAST },
 	.find_pll = intel_find_best_PLL,
-    },
-    { /* INTEL_LIMIT_IGD_LVDS */
+};
+
+static const intel_limit_t intel_limits_igd_lvds = {
         .dot = { .min = I9XX_DOT_MIN,		.max = I9XX_DOT_MAX },
         .vco = { .min = IGD_VCO_MIN,		.max = IGD_VCO_MAX },
         .n   = { .min = IGD_N_MIN,		.max = IGD_N_MAX },
@@ -415,8 +457,9 @@
 	.p2  = { .dot_limit = I9XX_P2_LVDS_SLOW_LIMIT,
 		 .p2_slow = I9XX_P2_LVDS_SLOW,	.p2_fast = I9XX_P2_LVDS_SLOW },
 	.find_pll = intel_find_best_PLL,
-    },
-    { /* INTEL_LIMIT_IGDNG_SDVO_DAC */
+};
+
+static const intel_limit_t intel_limits_igdng_sdvo = {
 	.dot = { .min = IGDNG_DOT_MIN,          .max = IGDNG_DOT_MAX },
 	.vco = { .min = IGDNG_VCO_MIN,          .max = IGDNG_VCO_MAX },
 	.n   = { .min = IGDNG_N_MIN,            .max = IGDNG_N_MAX },
@@ -429,8 +472,9 @@
 		 .p2_slow = IGDNG_P2_SDVO_DAC_SLOW,
 		 .p2_fast = IGDNG_P2_SDVO_DAC_FAST },
 	.find_pll = intel_igdng_find_best_PLL,
-    },
-    { /* INTEL_LIMIT_IGDNG_LVDS */
+};
+
+static const intel_limit_t intel_limits_igdng_lvds = {
 	.dot = { .min = IGDNG_DOT_MIN,          .max = IGDNG_DOT_MAX },
 	.vco = { .min = IGDNG_VCO_MIN,          .max = IGDNG_VCO_MAX },
 	.n   = { .min = IGDNG_N_MIN,            .max = IGDNG_N_MAX },
@@ -443,16 +487,15 @@
 		 .p2_slow = IGDNG_P2_LVDS_SLOW,
 		 .p2_fast = IGDNG_P2_LVDS_FAST },
 	.find_pll = intel_igdng_find_best_PLL,
-    },
 };
 
 static const intel_limit_t *intel_igdng_limit(struct drm_crtc *crtc)
 {
 	const intel_limit_t *limit;
 	if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
-		limit = &intel_limits[INTEL_LIMIT_IGDNG_LVDS];
+		limit = &intel_limits_igdng_lvds;
 	else
-		limit = &intel_limits[INTEL_LIMIT_IGDNG_SDVO_DAC];
+		limit = &intel_limits_igdng_sdvo;
 
 	return limit;
 }
@@ -467,19 +510,19 @@
 		if ((I915_READ(LVDS) & LVDS_CLKB_POWER_MASK) ==
 		    LVDS_CLKB_POWER_UP)
 			/* LVDS with dual channel */
-			limit = &intel_limits
-					[INTEL_LIMIT_G4X_DUAL_CHANNEL_LVDS];
+			limit = &intel_limits_g4x_dual_channel_lvds;
 		else
 			/* LVDS with dual channel */
-			limit = &intel_limits
-					[INTEL_LIMIT_G4X_SINGLE_CHANNEL_LVDS];
+			limit = &intel_limits_g4x_single_channel_lvds;
 	} else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_HDMI) ||
 		   intel_pipe_has_type(crtc, INTEL_OUTPUT_ANALOG)) {
-		limit = &intel_limits[INTEL_LIMIT_G4X_HDMI_DAC];
+		limit = &intel_limits_g4x_hdmi;
 	} else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_SDVO)) {
-		limit = &intel_limits[INTEL_LIMIT_G4X_SDVO];
+		limit = &intel_limits_g4x_sdvo;
+	} else if (intel_pipe_has_type (crtc, INTEL_OUTPUT_DISPLAYPORT)) {
+		limit = &intel_limits_g4x_display_port;
 	} else /* The option is for other outputs */
-		limit = &intel_limits[INTEL_LIMIT_I9XX_SDVO_DAC];
+		limit = &intel_limits_i9xx_sdvo;
 
 	return limit;
 }
@@ -495,19 +538,19 @@
 		limit = intel_g4x_limit(crtc);
 	} else if (IS_I9XX(dev) && !IS_IGD(dev)) {
 		if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
-			limit = &intel_limits[INTEL_LIMIT_I9XX_LVDS];
+			limit = &intel_limits_i9xx_lvds;
 		else
-			limit = &intel_limits[INTEL_LIMIT_I9XX_SDVO_DAC];
+			limit = &intel_limits_i9xx_sdvo;
 	} else if (IS_IGD(dev)) {
 		if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
-			limit = &intel_limits[INTEL_LIMIT_IGD_LVDS];
+			limit = &intel_limits_igd_lvds;
 		else
-			limit = &intel_limits[INTEL_LIMIT_IGD_SDVO_DAC];
+			limit = &intel_limits_igd_sdvo;
 	} else {
 		if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
-			limit = &intel_limits[INTEL_LIMIT_I8XX_LVDS];
+			limit = &intel_limits_i8xx_lvds;
 		else
-			limit = &intel_limits[INTEL_LIMIT_I8XX_DVO_DAC];
+			limit = &intel_limits_i8xx_dvo;
 	}
 	return limit;
 }
@@ -764,6 +807,35 @@
 	return found;
 }
 
+/* DisplayPort has only two frequencies, 162MHz and 270MHz */
+static bool
+intel_find_pll_g4x_dp(const intel_limit_t *limit, struct drm_crtc *crtc,
+		      int target, int refclk, intel_clock_t *best_clock)
+{
+    intel_clock_t clock;
+    if (target < 200000) {
+	clock.dot = 161670;
+	clock.p = 20;
+	clock.p1 = 2;
+	clock.p2 = 10;
+	clock.n = 0x01;
+	clock.m = 97;
+	clock.m1 = 0x10;
+	clock.m2 = 0x05;
+    } else {
+	clock.dot = 270000;
+	clock.p = 10;
+	clock.p1 = 1;
+	clock.p2 = 10;
+	clock.n = 0x02;
+	clock.m = 108;
+	clock.m1 = 0x12;
+	clock.m2 = 0x06;
+    }
+    memcpy(best_clock, &clock, sizeof(intel_clock_t));
+    return true;
+}
+
 void
 intel_wait_for_vblank(struct drm_device *dev)
 {
@@ -1541,7 +1613,7 @@
 	intel_clock_t clock;
 	u32 dpll = 0, fp = 0, dspcntr, pipeconf;
 	bool ok, is_sdvo = false, is_dvo = false;
-	bool is_crt = false, is_lvds = false, is_tv = false;
+	bool is_crt = false, is_lvds = false, is_tv = false, is_dp = false;
 	struct drm_mode_config *mode_config = &dev->mode_config;
 	struct drm_connector *connector;
 	const intel_limit_t *limit;
@@ -1585,6 +1657,9 @@
 		case INTEL_OUTPUT_ANALOG:
 			is_crt = true;
 			break;
+		case INTEL_OUTPUT_DISPLAYPORT:
+			is_dp = true;
+			break;
 		}
 
 		num_outputs++;
@@ -1600,6 +1675,7 @@
 	} else {
 		refclk = 48000;
 	}
+	
 
 	/*
 	 * Returns a set of divisors for the desired target clock with the given
@@ -1662,6 +1738,8 @@
 			else if (IS_IGDNG(dev))
 				dpll |= (sdvo_pixel_multiply - 1) << PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT;
 		}
+		if (is_dp)
+			dpll |= DPLL_DVO_HIGH_SPEED;
 
 		/* compute bitmask from p1 value */
 		if (IS_IGD(dev))
@@ -1809,6 +1887,8 @@
 		I915_WRITE(lvds_reg, lvds);
 		I915_READ(lvds_reg);
 	}
+	if (is_dp)
+		intel_dp_set_m_n(crtc, mode, adjusted_mode);
 
 	I915_WRITE(fp_reg, fp);
 	I915_WRITE(dpll_reg, dpll);
@@ -2475,6 +2555,8 @@
 			found = intel_sdvo_init(dev, SDVOB);
 			if (!found && SUPPORTS_INTEGRATED_HDMI(dev))
 				intel_hdmi_init(dev, SDVOB);
+			if (!found && SUPPORTS_INTEGRATED_DP(dev))
+				intel_dp_init(dev, DP_B);
 		}
 
 		/* Before G4X SDVOC doesn't have its own detect register */
@@ -2487,7 +2569,11 @@
 			found = intel_sdvo_init(dev, SDVOC);
 			if (!found && SUPPORTS_INTEGRATED_HDMI(dev))
 				intel_hdmi_init(dev, SDVOC);
+			if (!found && SUPPORTS_INTEGRATED_DP(dev))
+				intel_dp_init(dev, DP_C);
 		}
+		if (SUPPORTS_INTEGRATED_DP(dev) && (I915_READ(DP_D) & DP_DETECTED))
+			intel_dp_init(dev, DP_D);
 	} else
 		intel_dvo_init(dev);
 
@@ -2530,6 +2616,11 @@
 				     (1 << 1));
 			clone_mask = (1 << INTEL_OUTPUT_TVOUT);
 			break;
+		case INTEL_OUTPUT_DISPLAYPORT:
+			crtc_mask = ((1 << 0) |
+				     (1 << 1));
+			clone_mask = (1 << INTEL_OUTPUT_DISPLAYPORT);
+			break;
 		}
 		encoder->possible_crtcs = crtc_mask;
 		encoder->possible_clones = intel_connector_clones(dev, clone_mask);
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
new file mode 100644
index 0000000..8f8d37d
--- /dev/null
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -0,0 +1,1153 @@
+/*
+ * Copyright © 2008 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ *
+ * Authors:
+ *    Keith Packard <keithp@keithp.com>
+ *
+ */
+
+#include <linux/i2c.h>
+#include "drmP.h"
+#include "drm.h"
+#include "drm_crtc.h"
+#include "drm_crtc_helper.h"
+#include "intel_drv.h"
+#include "i915_drm.h"
+#include "i915_drv.h"
+#include "intel_dp.h"
+
+#define DP_LINK_STATUS_SIZE	6
+#define DP_LINK_CHECK_TIMEOUT	(10 * 1000)
+
+#define DP_LINK_CONFIGURATION_SIZE	9
+
+struct intel_dp_priv {
+	uint32_t output_reg;
+	uint32_t DP;
+	uint8_t  link_configuration[DP_LINK_CONFIGURATION_SIZE];
+	uint32_t save_DP;
+	uint8_t  save_link_configuration[DP_LINK_CONFIGURATION_SIZE];
+	bool has_audio;
+	int dpms_mode;
+	uint8_t link_bw;
+	uint8_t lane_count;
+	uint8_t dpcd[4];
+	struct intel_output *intel_output;
+	struct i2c_adapter adapter;
+	struct i2c_algo_dp_aux_data algo;
+};
+
+static void
+intel_dp_link_train(struct intel_output *intel_output, uint32_t DP,
+		    uint8_t link_configuration[DP_LINK_CONFIGURATION_SIZE]);
+
+static void
+intel_dp_link_down(struct intel_output *intel_output, uint32_t DP);
+
+static int
+intel_dp_max_lane_count(struct intel_output *intel_output)
+{
+	struct intel_dp_priv   *dp_priv = intel_output->dev_priv;
+	int max_lane_count = 4;
+
+	if (dp_priv->dpcd[0] >= 0x11) {
+		max_lane_count = dp_priv->dpcd[2] & 0x1f;
+		switch (max_lane_count) {
+		case 1: case 2: case 4:
+			break;
+		default:
+			max_lane_count = 4;
+		}
+	}
+	return max_lane_count;
+}
+
+static int
+intel_dp_max_link_bw(struct intel_output *intel_output)
+{
+	struct intel_dp_priv   *dp_priv = intel_output->dev_priv;
+	int max_link_bw = dp_priv->dpcd[1];
+
+	switch (max_link_bw) {
+	case DP_LINK_BW_1_62:
+	case DP_LINK_BW_2_7:
+		break;
+	default:
+		max_link_bw = DP_LINK_BW_1_62;
+		break;
+	}
+	return max_link_bw;
+}
+
+static int
+intel_dp_link_clock(uint8_t link_bw)
+{
+	if (link_bw == DP_LINK_BW_2_7)
+		return 270000;
+	else
+		return 162000;
+}
+
+/* I think this is a fiction */
+static int
+intel_dp_link_required(int pixel_clock)
+{
+	return pixel_clock * 3;
+}
+
+static int
+intel_dp_mode_valid(struct drm_connector *connector,
+		    struct drm_display_mode *mode)
+{
+	struct intel_output *intel_output = to_intel_output(connector);
+	int max_link_clock = intel_dp_link_clock(intel_dp_max_link_bw(intel_output));
+	int max_lanes = intel_dp_max_lane_count(intel_output);
+
+	if (intel_dp_link_required(mode->clock) > max_link_clock * max_lanes)
+		return MODE_CLOCK_HIGH;
+
+	if (mode->clock < 10000)
+		return MODE_CLOCK_LOW;
+
+	return MODE_OK;
+}
+
+static uint32_t
+pack_aux(uint8_t *src, int src_bytes)
+{
+	int	i;
+	uint32_t v = 0;
+
+	if (src_bytes > 4)
+		src_bytes = 4;
+	for (i = 0; i < src_bytes; i++)
+		v |= ((uint32_t) src[i]) << ((3-i) * 8);
+	return v;
+}
+
+static void
+unpack_aux(uint32_t src, uint8_t *dst, int dst_bytes)
+{
+	int i;
+	if (dst_bytes > 4)
+		dst_bytes = 4;
+	for (i = 0; i < dst_bytes; i++)
+		dst[i] = src >> ((3-i) * 8);
+}
+
+/* hrawclock is 1/4 the FSB frequency */
+static int
+intel_hrawclk(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	uint32_t clkcfg;
+
+	clkcfg = I915_READ(CLKCFG);
+	switch (clkcfg & CLKCFG_FSB_MASK) {
+	case CLKCFG_FSB_400:
+		return 100;
+	case CLKCFG_FSB_533:
+		return 133;
+	case CLKCFG_FSB_667:
+		return 166;
+	case CLKCFG_FSB_800:
+		return 200;
+	case CLKCFG_FSB_1067:
+		return 266;
+	case CLKCFG_FSB_1333:
+		return 333;
+	/* these two are just a guess; one of them might be right */
+	case CLKCFG_FSB_1600:
+	case CLKCFG_FSB_1600_ALT:
+		return 400;
+	default:
+		return 133;
+	}
+}
+
+static int
+intel_dp_aux_ch(struct intel_output *intel_output,
+		uint8_t *send, int send_bytes,
+		uint8_t *recv, int recv_size)
+{
+	struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+	uint32_t output_reg = dp_priv->output_reg;
+	struct drm_device *dev = intel_output->base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	uint32_t ch_ctl = output_reg + 0x10;
+	uint32_t ch_data = ch_ctl + 4;
+	int i;
+	int recv_bytes;
+	uint32_t ctl;
+	uint32_t status;
+	uint32_t aux_clock_divider;
+	int try;
+
+	/* The clock divider is based off the hrawclk,
+	 * and would like to run at 2MHz. So, take the
+	 * hrawclk value and divide by 2 and use that
+	 */
+	aux_clock_divider = intel_hrawclk(dev) / 2;
+	/* Must try at least 3 times according to DP spec */
+	for (try = 0; try < 5; try++) {
+		/* Load the send data into the aux channel data registers */
+		for (i = 0; i < send_bytes; i += 4) {
+			uint32_t    d = pack_aux(send + i, send_bytes - i);;
+	
+			I915_WRITE(ch_data + i, d);
+		}
+	
+		ctl = (DP_AUX_CH_CTL_SEND_BUSY |
+		       DP_AUX_CH_CTL_TIME_OUT_400us |
+		       (send_bytes << DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT) |
+		       (5 << DP_AUX_CH_CTL_PRECHARGE_2US_SHIFT) |
+		       (aux_clock_divider << DP_AUX_CH_CTL_BIT_CLOCK_2X_SHIFT) |
+		       DP_AUX_CH_CTL_DONE |
+		       DP_AUX_CH_CTL_TIME_OUT_ERROR |
+		       DP_AUX_CH_CTL_RECEIVE_ERROR);
+	
+		/* Send the command and wait for it to complete */
+		I915_WRITE(ch_ctl, ctl);
+		(void) I915_READ(ch_ctl);
+		for (;;) {
+			udelay(100);
+			status = I915_READ(ch_ctl);
+			if ((status & DP_AUX_CH_CTL_SEND_BUSY) == 0)
+				break;
+		}
+	
+		/* Clear done status and any errors */
+		I915_WRITE(ch_ctl, (ctl |
+				DP_AUX_CH_CTL_DONE |
+				DP_AUX_CH_CTL_TIME_OUT_ERROR |
+				DP_AUX_CH_CTL_RECEIVE_ERROR));
+		(void) I915_READ(ch_ctl);
+		if ((status & DP_AUX_CH_CTL_TIME_OUT_ERROR) == 0)
+			break;
+	}
+
+	if ((status & DP_AUX_CH_CTL_DONE) == 0) {
+		printk(KERN_ERR "dp_aux_ch not done status 0x%08x\n", status);
+		return -EBUSY;
+	}
+
+	/* Check for timeout or receive error.
+	 * Timeouts occur when the sink is not connected
+	 */
+	if (status & DP_AUX_CH_CTL_RECEIVE_ERROR) {
+		printk(KERN_ERR "dp_aux_ch receive error status 0x%08x\n", status);
+		return -EIO;
+	}
+	if (status & DP_AUX_CH_CTL_TIME_OUT_ERROR) {
+		printk(KERN_ERR "dp_aux_ch timeout status 0x%08x\n", status);
+		return -ETIMEDOUT;
+	}
+
+	/* Unload any bytes sent back from the other side */
+	recv_bytes = ((status & DP_AUX_CH_CTL_MESSAGE_SIZE_MASK) >>
+		      DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT);
+
+	if (recv_bytes > recv_size)
+		recv_bytes = recv_size;
+	
+	for (i = 0; i < recv_bytes; i += 4) {
+		uint32_t    d = I915_READ(ch_data + i);
+
+		unpack_aux(d, recv + i, recv_bytes - i);
+	}
+
+	return recv_bytes;
+}
+
+/* Write data to the aux channel in native mode */
+static int
+intel_dp_aux_native_write(struct intel_output *intel_output,
+			  uint16_t address, uint8_t *send, int send_bytes)
+{
+	int ret;
+	uint8_t	msg[20];
+	int msg_bytes;
+	uint8_t	ack;
+
+	if (send_bytes > 16)
+		return -1;
+	msg[0] = AUX_NATIVE_WRITE << 4;
+	msg[1] = address >> 8;
+	msg[2] = address;
+	msg[3] = send_bytes - 1;
+	memcpy(&msg[4], send, send_bytes);
+	msg_bytes = send_bytes + 4;
+	for (;;) {
+		ret = intel_dp_aux_ch(intel_output, msg, msg_bytes, &ack, 1);
+		if (ret < 0)
+			return ret;
+		if ((ack & AUX_NATIVE_REPLY_MASK) == AUX_NATIVE_REPLY_ACK)
+			break;
+		else if ((ack & AUX_NATIVE_REPLY_MASK) == AUX_NATIVE_REPLY_DEFER)
+			udelay(100);
+		else
+			return -EIO;
+	}
+	return send_bytes;
+}
+
+/* Write a single byte to the aux channel in native mode */
+static int
+intel_dp_aux_native_write_1(struct intel_output *intel_output,
+			    uint16_t address, uint8_t byte)
+{
+	return intel_dp_aux_native_write(intel_output, address, &byte, 1);
+}
+
+/* read bytes from a native aux channel */
+static int
+intel_dp_aux_native_read(struct intel_output *intel_output,
+			 uint16_t address, uint8_t *recv, int recv_bytes)
+{
+	uint8_t msg[4];
+	int msg_bytes;
+	uint8_t reply[20];
+	int reply_bytes;
+	uint8_t ack;
+	int ret;
+
+	msg[0] = AUX_NATIVE_READ << 4;
+	msg[1] = address >> 8;
+	msg[2] = address & 0xff;
+	msg[3] = recv_bytes - 1;
+
+	msg_bytes = 4;
+	reply_bytes = recv_bytes + 1;
+
+	for (;;) {
+		ret = intel_dp_aux_ch(intel_output, msg, msg_bytes,
+				      reply, reply_bytes);
+		if (ret == 0)
+			return -EPROTO;
+		if (ret < 0)
+			return ret;
+		ack = reply[0];
+		if ((ack & AUX_NATIVE_REPLY_MASK) == AUX_NATIVE_REPLY_ACK) {
+			memcpy(recv, reply + 1, ret - 1);
+			return ret - 1;
+		}
+		else if ((ack & AUX_NATIVE_REPLY_MASK) == AUX_NATIVE_REPLY_DEFER)
+			udelay(100);
+		else
+			return -EIO;
+	}
+}
+
+static int
+intel_dp_i2c_aux_ch(struct i2c_adapter *adapter,
+		    uint8_t *send, int send_bytes,
+		    uint8_t *recv, int recv_bytes)
+{
+	struct intel_dp_priv *dp_priv = container_of(adapter,
+						     struct intel_dp_priv,
+						     adapter);
+	struct intel_output *intel_output = dp_priv->intel_output;
+
+	return intel_dp_aux_ch(intel_output,
+			       send, send_bytes, recv, recv_bytes);
+}
+
+static int
+intel_dp_i2c_init(struct intel_output *intel_output, const char *name)
+{
+	struct intel_dp_priv   *dp_priv = intel_output->dev_priv;
+
+	DRM_ERROR("i2c_init %s\n", name);
+	dp_priv->algo.running = false;
+	dp_priv->algo.address = 0;
+	dp_priv->algo.aux_ch = intel_dp_i2c_aux_ch;
+
+	memset(&dp_priv->adapter, '\0', sizeof (dp_priv->adapter));
+	dp_priv->adapter.owner = THIS_MODULE;
+	dp_priv->adapter.class = I2C_CLASS_DDC;
+	strncpy (dp_priv->adapter.name, name, sizeof dp_priv->adapter.name - 1);
+	dp_priv->adapter.name[sizeof dp_priv->adapter.name - 1] = '\0';
+	dp_priv->adapter.algo_data = &dp_priv->algo;
+	dp_priv->adapter.dev.parent = &intel_output->base.kdev;
+	
+	return i2c_dp_aux_add_bus(&dp_priv->adapter);
+}
+
+static bool
+intel_dp_mode_fixup(struct drm_encoder *encoder, struct drm_display_mode *mode,
+		    struct drm_display_mode *adjusted_mode)
+{
+	struct intel_output *intel_output = enc_to_intel_output(encoder);
+	struct intel_dp_priv   *dp_priv = intel_output->dev_priv;
+	int lane_count, clock;
+	int max_lane_count = intel_dp_max_lane_count(intel_output);
+	int max_clock = intel_dp_max_link_bw(intel_output) == DP_LINK_BW_2_7 ? 1 : 0;
+	static int bws[2] = { DP_LINK_BW_1_62, DP_LINK_BW_2_7 };
+
+	for (lane_count = 1; lane_count <= max_lane_count; lane_count <<= 1) {
+		for (clock = 0; clock <= max_clock; clock++) {
+			int link_avail = intel_dp_link_clock(bws[clock]) * lane_count;
+
+			if (intel_dp_link_required(mode->clock) <= link_avail) {
+				dp_priv->link_bw = bws[clock];
+				dp_priv->lane_count = lane_count;
+				adjusted_mode->clock = intel_dp_link_clock(dp_priv->link_bw);
+				printk(KERN_ERR "link bw %02x lane count %d clock %d\n",
+				       dp_priv->link_bw, dp_priv->lane_count,
+				       adjusted_mode->clock);
+				return true;
+			}
+		}
+	}
+	return false;
+}
+
+struct intel_dp_m_n {
+	uint32_t	tu;
+	uint32_t	gmch_m;
+	uint32_t	gmch_n;
+	uint32_t	link_m;
+	uint32_t	link_n;
+};
+
+static void
+intel_reduce_ratio(uint32_t *num, uint32_t *den)
+{
+	while (*num > 0xffffff || *den > 0xffffff) {
+		*num >>= 1;
+		*den >>= 1;
+	}
+}
+
+static void
+intel_dp_compute_m_n(int bytes_per_pixel,
+		     int nlanes,
+		     int pixel_clock,
+		     int link_clock,
+		     struct intel_dp_m_n *m_n)
+{
+	m_n->tu = 64;
+	m_n->gmch_m = pixel_clock * bytes_per_pixel;
+	m_n->gmch_n = link_clock * nlanes;
+	intel_reduce_ratio(&m_n->gmch_m, &m_n->gmch_n);
+	m_n->link_m = pixel_clock;
+	m_n->link_n = link_clock;
+	intel_reduce_ratio(&m_n->link_m, &m_n->link_n);
+}
+
+void
+intel_dp_set_m_n(struct drm_crtc *crtc, struct drm_display_mode *mode,
+		 struct drm_display_mode *adjusted_mode)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_mode_config *mode_config = &dev->mode_config;
+	struct drm_connector *connector;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	int lane_count = 4;
+	struct intel_dp_m_n m_n;
+
+	/*
+	 * Find the lane count in the intel_output private
+	 */
+	list_for_each_entry(connector, &mode_config->connector_list, head) {
+		struct intel_output *intel_output = to_intel_output(connector);
+		struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+
+		if (!connector->encoder || connector->encoder->crtc != crtc)
+			continue;
+
+		if (intel_output->type == INTEL_OUTPUT_DISPLAYPORT) {
+			lane_count = dp_priv->lane_count;
+			break;
+		}
+	}
+
+	/*
+	 * Compute the GMCH and Link ratios. The '3' here is
+	 * the number of bytes_per_pixel post-LUT, which we always
+	 * set up for 8-bits of R/G/B, or 3 bytes total.
+	 */
+	intel_dp_compute_m_n(3, lane_count,
+			     mode->clock, adjusted_mode->clock, &m_n);
+
+	if (intel_crtc->pipe == 0) {
+		I915_WRITE(PIPEA_GMCH_DATA_M,
+		       ((m_n.tu - 1) << PIPE_GMCH_DATA_M_TU_SIZE_SHIFT) |
+		       m_n.gmch_m);
+		I915_WRITE(PIPEA_GMCH_DATA_N,
+		       m_n.gmch_n);
+		I915_WRITE(PIPEA_DP_LINK_M, m_n.link_m);
+		I915_WRITE(PIPEA_DP_LINK_N, m_n.link_n);
+	} else {
+		I915_WRITE(PIPEB_GMCH_DATA_M,
+		       ((m_n.tu - 1) << PIPE_GMCH_DATA_M_TU_SIZE_SHIFT) |
+		       m_n.gmch_m);
+		I915_WRITE(PIPEB_GMCH_DATA_N,
+		       m_n.gmch_n);
+		I915_WRITE(PIPEB_DP_LINK_M, m_n.link_m);
+		I915_WRITE(PIPEB_DP_LINK_N, m_n.link_n);
+	}
+}
+
+static void
+intel_dp_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode,
+		  struct drm_display_mode *adjusted_mode)
+{
+	struct intel_output *intel_output = enc_to_intel_output(encoder);
+	struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+	struct drm_crtc *crtc = intel_output->enc.crtc;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+
+	dp_priv->DP = (DP_LINK_TRAIN_OFF |
+			DP_VOLTAGE_0_4 |
+			DP_PRE_EMPHASIS_0 |
+			DP_SYNC_VS_HIGH |
+			DP_SYNC_HS_HIGH);
+
+	switch (dp_priv->lane_count) {
+	case 1:
+		dp_priv->DP |= DP_PORT_WIDTH_1;
+		break;
+	case 2:
+		dp_priv->DP |= DP_PORT_WIDTH_2;
+		break;
+	case 4:
+		dp_priv->DP |= DP_PORT_WIDTH_4;
+		break;
+	}
+	if (dp_priv->has_audio)
+		dp_priv->DP |= DP_AUDIO_OUTPUT_ENABLE;
+
+	memset(dp_priv->link_configuration, 0, DP_LINK_CONFIGURATION_SIZE);
+	dp_priv->link_configuration[0] = dp_priv->link_bw;
+	dp_priv->link_configuration[1] = dp_priv->lane_count;
+
+	/*
+	 * Check for DPCD version > 1.1,
+	 * enable enahanced frame stuff in that case
+	 */
+	if (dp_priv->dpcd[0] >= 0x11) {
+		dp_priv->link_configuration[1] |= DP_LANE_COUNT_ENHANCED_FRAME_EN;
+		dp_priv->DP |= DP_ENHANCED_FRAMING;
+	}
+
+	if (intel_crtc->pipe == 1)
+		dp_priv->DP |= DP_PIPEB_SELECT;
+}
+
+
+static void
+intel_dp_dpms(struct drm_encoder *encoder, int mode)
+{
+	struct intel_output *intel_output = enc_to_intel_output(encoder);
+	struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+	struct drm_device *dev = intel_output->base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	uint32_t dp_reg = I915_READ(dp_priv->output_reg);
+
+	if (mode != DRM_MODE_DPMS_ON) {
+		if (dp_reg & DP_PORT_EN)
+			intel_dp_link_down(intel_output, dp_priv->DP);
+	} else {
+		if (!(dp_reg & DP_PORT_EN))
+			intel_dp_link_train(intel_output, dp_priv->DP, dp_priv->link_configuration);
+	}
+	dp_priv->dpms_mode = mode;
+}
+
+/*
+ * Fetch AUX CH registers 0x202 - 0x207 which contain
+ * link status information
+ */
+static bool
+intel_dp_get_link_status(struct intel_output *intel_output,
+			 uint8_t link_status[DP_LINK_STATUS_SIZE])
+{
+	int ret;
+
+	ret = intel_dp_aux_native_read(intel_output,
+				       DP_LANE0_1_STATUS,
+				       link_status, DP_LINK_STATUS_SIZE);
+	if (ret != DP_LINK_STATUS_SIZE)
+		return false;
+	return true;
+}
+
+static uint8_t
+intel_dp_link_status(uint8_t link_status[DP_LINK_STATUS_SIZE],
+		     int r)
+{
+	return link_status[r - DP_LANE0_1_STATUS];
+}
+
+static void
+intel_dp_save(struct drm_connector *connector)
+{
+	struct intel_output *intel_output = to_intel_output(connector);
+	struct drm_device *dev = intel_output->base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+
+	dp_priv->save_DP = I915_READ(dp_priv->output_reg);
+	intel_dp_aux_native_read(intel_output, DP_LINK_BW_SET,
+				 dp_priv->save_link_configuration,
+				 sizeof (dp_priv->save_link_configuration));
+}
+
+static uint8_t
+intel_get_adjust_request_voltage(uint8_t link_status[DP_LINK_STATUS_SIZE],
+				 int lane)
+{
+	int	    i = DP_ADJUST_REQUEST_LANE0_1 + (lane >> 1);
+	int	    s = ((lane & 1) ?
+			 DP_ADJUST_VOLTAGE_SWING_LANE1_SHIFT :
+			 DP_ADJUST_VOLTAGE_SWING_LANE0_SHIFT);
+	uint8_t l = intel_dp_link_status(link_status, i);
+
+	return ((l >> s) & 3) << DP_TRAIN_VOLTAGE_SWING_SHIFT;
+}
+
+static uint8_t
+intel_get_adjust_request_pre_emphasis(uint8_t link_status[DP_LINK_STATUS_SIZE],
+				      int lane)
+{
+	int	    i = DP_ADJUST_REQUEST_LANE0_1 + (lane >> 1);
+	int	    s = ((lane & 1) ?
+			 DP_ADJUST_PRE_EMPHASIS_LANE1_SHIFT :
+			 DP_ADJUST_PRE_EMPHASIS_LANE0_SHIFT);
+	uint8_t l = intel_dp_link_status(link_status, i);
+
+	return ((l >> s) & 3) << DP_TRAIN_PRE_EMPHASIS_SHIFT;
+}
+
+
+#if 0
+static char	*voltage_names[] = {
+	"0.4V", "0.6V", "0.8V", "1.2V"
+};
+static char	*pre_emph_names[] = {
+	"0dB", "3.5dB", "6dB", "9.5dB"
+};
+static char	*link_train_names[] = {
+	"pattern 1", "pattern 2", "idle", "off"
+};
+#endif
+
+/*
+ * These are source-specific values; current Intel hardware supports
+ * a maximum voltage of 800mV and a maximum pre-emphasis of 6dB
+ */
+#define I830_DP_VOLTAGE_MAX	    DP_TRAIN_VOLTAGE_SWING_800
+
+static uint8_t
+intel_dp_pre_emphasis_max(uint8_t voltage_swing)
+{
+	switch (voltage_swing & DP_TRAIN_VOLTAGE_SWING_MASK) {
+	case DP_TRAIN_VOLTAGE_SWING_400:
+		return DP_TRAIN_PRE_EMPHASIS_6;
+	case DP_TRAIN_VOLTAGE_SWING_600:
+		return DP_TRAIN_PRE_EMPHASIS_6;
+	case DP_TRAIN_VOLTAGE_SWING_800:
+		return DP_TRAIN_PRE_EMPHASIS_3_5;
+	case DP_TRAIN_VOLTAGE_SWING_1200:
+	default:
+		return DP_TRAIN_PRE_EMPHASIS_0;
+	}
+}
+
+static void
+intel_get_adjust_train(struct intel_output *intel_output,
+		       uint8_t link_status[DP_LINK_STATUS_SIZE],
+		       int lane_count,
+		       uint8_t train_set[4])
+{
+	uint8_t v = 0;
+	uint8_t p = 0;
+	int lane;
+
+	for (lane = 0; lane < lane_count; lane++) {
+		uint8_t this_v = intel_get_adjust_request_voltage(link_status, lane);
+		uint8_t this_p = intel_get_adjust_request_pre_emphasis(link_status, lane);
+
+		if (this_v > v)
+			v = this_v;
+		if (this_p > p)
+			p = this_p;
+	}
+
+	if (v >= I830_DP_VOLTAGE_MAX)
+		v = I830_DP_VOLTAGE_MAX | DP_TRAIN_MAX_SWING_REACHED;
+
+	if (p >= intel_dp_pre_emphasis_max(v))
+		p = intel_dp_pre_emphasis_max(v) | DP_TRAIN_MAX_PRE_EMPHASIS_REACHED;
+
+	for (lane = 0; lane < 4; lane++)
+		train_set[lane] = v | p;
+}
+
+static uint32_t
+intel_dp_signal_levels(uint8_t train_set, int lane_count)
+{
+	uint32_t	signal_levels = 0;
+
+	switch (train_set & DP_TRAIN_VOLTAGE_SWING_MASK) {
+	case DP_TRAIN_VOLTAGE_SWING_400:
+	default:
+		signal_levels |= DP_VOLTAGE_0_4;
+		break;
+	case DP_TRAIN_VOLTAGE_SWING_600:
+		signal_levels |= DP_VOLTAGE_0_6;
+		break;
+	case DP_TRAIN_VOLTAGE_SWING_800:
+		signal_levels |= DP_VOLTAGE_0_8;
+		break;
+	case DP_TRAIN_VOLTAGE_SWING_1200:
+		signal_levels |= DP_VOLTAGE_1_2;
+		break;
+	}
+	switch (train_set & DP_TRAIN_PRE_EMPHASIS_MASK) {
+	case DP_TRAIN_PRE_EMPHASIS_0:
+	default:
+		signal_levels |= DP_PRE_EMPHASIS_0;
+		break;
+	case DP_TRAIN_PRE_EMPHASIS_3_5:
+		signal_levels |= DP_PRE_EMPHASIS_3_5;
+		break;
+	case DP_TRAIN_PRE_EMPHASIS_6:
+		signal_levels |= DP_PRE_EMPHASIS_6;
+		break;
+	case DP_TRAIN_PRE_EMPHASIS_9_5:
+		signal_levels |= DP_PRE_EMPHASIS_9_5;
+		break;
+	}
+	return signal_levels;
+}
+
+static uint8_t
+intel_get_lane_status(uint8_t link_status[DP_LINK_STATUS_SIZE],
+		      int lane)
+{
+	int i = DP_LANE0_1_STATUS + (lane >> 1);
+	int s = (lane & 1) * 4;
+	uint8_t l = intel_dp_link_status(link_status, i);
+
+	return (l >> s) & 0xf;
+}
+
+/* Check for clock recovery is done on all channels */
+static bool
+intel_clock_recovery_ok(uint8_t link_status[DP_LINK_STATUS_SIZE], int lane_count)
+{
+	int lane;
+	uint8_t lane_status;
+
+	for (lane = 0; lane < lane_count; lane++) {
+		lane_status = intel_get_lane_status(link_status, lane);
+		if ((lane_status & DP_LANE_CR_DONE) == 0)
+			return false;
+	}
+	return true;
+}
+
+/* Check to see if channel eq is done on all channels */
+#define CHANNEL_EQ_BITS (DP_LANE_CR_DONE|\
+			 DP_LANE_CHANNEL_EQ_DONE|\
+			 DP_LANE_SYMBOL_LOCKED)
+static bool
+intel_channel_eq_ok(uint8_t link_status[DP_LINK_STATUS_SIZE], int lane_count)
+{
+	uint8_t lane_align;
+	uint8_t lane_status;
+	int lane;
+
+	lane_align = intel_dp_link_status(link_status,
+					  DP_LANE_ALIGN_STATUS_UPDATED);
+	if ((lane_align & DP_INTERLANE_ALIGN_DONE) == 0)
+		return false;
+	for (lane = 0; lane < lane_count; lane++) {
+		lane_status = intel_get_lane_status(link_status, lane);
+		if ((lane_status & CHANNEL_EQ_BITS) != CHANNEL_EQ_BITS)
+			return false;
+	}
+	return true;
+}
+
+static bool
+intel_dp_set_link_train(struct intel_output *intel_output,
+			uint32_t dp_reg_value,
+			uint8_t dp_train_pat,
+			uint8_t train_set[4],
+			bool first)
+{
+	struct drm_device *dev = intel_output->base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+	int ret;
+
+	I915_WRITE(dp_priv->output_reg, dp_reg_value);
+	POSTING_READ(dp_priv->output_reg);
+	if (first)
+		intel_wait_for_vblank(dev);
+
+	intel_dp_aux_native_write_1(intel_output,
+				    DP_TRAINING_PATTERN_SET,
+				    dp_train_pat);
+
+	ret = intel_dp_aux_native_write(intel_output,
+					DP_TRAINING_LANE0_SET, train_set, 4);
+	if (ret != 4)
+		return false;
+
+	return true;
+}
+
+static void
+intel_dp_link_train(struct intel_output *intel_output, uint32_t DP,
+		    uint8_t link_configuration[DP_LINK_CONFIGURATION_SIZE])
+{
+	struct drm_device *dev = intel_output->base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+	uint8_t	train_set[4];
+	uint8_t link_status[DP_LINK_STATUS_SIZE];
+	int i;
+	uint8_t voltage;
+	bool clock_recovery = false;
+	bool channel_eq = false;
+	bool first = true;
+	int tries;
+
+	/* Write the link configuration data */
+	intel_dp_aux_native_write(intel_output, 0x100,
+				  link_configuration, DP_LINK_CONFIGURATION_SIZE);
+
+	DP |= DP_PORT_EN;
+	DP &= ~DP_LINK_TRAIN_MASK;
+	memset(train_set, 0, 4);
+	voltage = 0xff;
+	tries = 0;
+	clock_recovery = false;
+	for (;;) {
+		/* Use train_set[0] to set the voltage and pre emphasis values */
+		uint32_t    signal_levels = intel_dp_signal_levels(train_set[0], dp_priv->lane_count);
+		DP = (DP & ~(DP_VOLTAGE_MASK|DP_PRE_EMPHASIS_MASK)) | signal_levels;
+
+		if (!intel_dp_set_link_train(intel_output, DP | DP_LINK_TRAIN_PAT_1,
+					     DP_TRAINING_PATTERN_1, train_set, first))
+			break;
+		first = false;
+		/* Set training pattern 1 */
+
+		udelay(100);
+		if (!intel_dp_get_link_status(intel_output, link_status))
+			break;
+
+		if (intel_clock_recovery_ok(link_status, dp_priv->lane_count)) {
+			clock_recovery = true;
+			break;
+		}
+
+		/* Check to see if we've tried the max voltage */
+		for (i = 0; i < dp_priv->lane_count; i++)
+			if ((train_set[i] & DP_TRAIN_MAX_SWING_REACHED) == 0)
+				break;
+		if (i == dp_priv->lane_count)
+			break;
+
+		/* Check to see if we've tried the same voltage 5 times */
+		if ((train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK) == voltage) {
+			++tries;
+			if (tries == 5)
+				break;
+		} else
+			tries = 0;
+		voltage = train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK;
+
+		/* Compute new train_set as requested by target */
+		intel_get_adjust_train(intel_output, link_status, dp_priv->lane_count, train_set);
+	}
+
+	/* channel equalization */
+	tries = 0;
+	channel_eq = false;
+	for (;;) {
+		/* Use train_set[0] to set the voltage and pre emphasis values */
+		uint32_t    signal_levels = intel_dp_signal_levels(train_set[0], dp_priv->lane_count);
+		DP = (DP & ~(DP_VOLTAGE_MASK|DP_PRE_EMPHASIS_MASK)) | signal_levels;
+
+		/* channel eq pattern */
+		if (!intel_dp_set_link_train(intel_output, DP | DP_LINK_TRAIN_PAT_2,
+					     DP_TRAINING_PATTERN_2, train_set,
+					     false))
+			break;
+
+		udelay(400);
+		if (!intel_dp_get_link_status(intel_output, link_status))
+			break;
+
+		if (intel_channel_eq_ok(link_status, dp_priv->lane_count)) {
+			channel_eq = true;
+			break;
+		}
+
+		/* Try 5 times */
+		if (tries > 5)
+			break;
+
+		/* Compute new train_set as requested by target */
+		intel_get_adjust_train(intel_output, link_status, dp_priv->lane_count, train_set);
+		++tries;
+	}
+
+	I915_WRITE(dp_priv->output_reg, DP | DP_LINK_TRAIN_OFF);
+	POSTING_READ(dp_priv->output_reg);
+	intel_dp_aux_native_write_1(intel_output,
+				    DP_TRAINING_PATTERN_SET, DP_TRAINING_PATTERN_DISABLE);
+}
+
+static void
+intel_dp_link_down(struct intel_output *intel_output, uint32_t DP)
+{
+	struct drm_device *dev = intel_output->base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+
+	I915_WRITE(dp_priv->output_reg, DP & ~DP_PORT_EN);
+	POSTING_READ(dp_priv->output_reg);
+}
+
+static void
+intel_dp_restore(struct drm_connector *connector)
+{
+	struct intel_output *intel_output = to_intel_output(connector);
+	struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+
+	if (dp_priv->save_DP & DP_PORT_EN)
+		intel_dp_link_train(intel_output, dp_priv->save_DP, dp_priv->save_link_configuration);
+	else
+		intel_dp_link_down(intel_output,  dp_priv->save_DP);
+}
+
+/*
+ * According to DP spec
+ * 5.1.2:
+ *  1. Read DPCD
+ *  2. Configure link according to Receiver Capabilities
+ *  3. Use Link Training from 2.5.3.3 and 3.5.1.3
+ *  4. Check link status on receipt of hot-plug interrupt
+ */
+
+static void
+intel_dp_check_link_status(struct intel_output *intel_output)
+{
+	struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+	uint8_t link_status[DP_LINK_STATUS_SIZE];
+
+	if (!intel_output->enc.crtc)
+		return;
+
+	if (!intel_dp_get_link_status(intel_output, link_status)) {
+		intel_dp_link_down(intel_output, dp_priv->DP);
+		return;
+	}
+
+	if (!intel_channel_eq_ok(link_status, dp_priv->lane_count))
+		intel_dp_link_train(intel_output, dp_priv->DP, dp_priv->link_configuration);
+}
+
+/**
+ * Uses CRT_HOTPLUG_EN and CRT_HOTPLUG_STAT to detect DP connection.
+ *
+ * \return true if DP port is connected.
+ * \return false if DP port is disconnected.
+ */
+static enum drm_connector_status
+intel_dp_detect(struct drm_connector *connector)
+{
+	struct intel_output *intel_output = to_intel_output(connector);
+	struct drm_device *dev = intel_output->base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+	uint32_t temp, bit;
+	enum drm_connector_status status;
+
+	dp_priv->has_audio = false;
+
+	temp = I915_READ(PORT_HOTPLUG_EN);
+
+	I915_WRITE(PORT_HOTPLUG_EN,
+	       temp |
+	       DPB_HOTPLUG_INT_EN |
+	       DPC_HOTPLUG_INT_EN |
+	       DPD_HOTPLUG_INT_EN);
+
+	POSTING_READ(PORT_HOTPLUG_EN);
+
+	switch (dp_priv->output_reg) {
+	case DP_B:
+		bit = DPB_HOTPLUG_INT_STATUS;
+		break;
+	case DP_C:
+		bit = DPC_HOTPLUG_INT_STATUS;
+		break;
+	case DP_D:
+		bit = DPD_HOTPLUG_INT_STATUS;
+		break;
+	default:
+		return connector_status_unknown;
+	}
+
+	temp = I915_READ(PORT_HOTPLUG_STAT);
+
+	if ((temp & bit) == 0)
+		return connector_status_disconnected;
+
+	status = connector_status_disconnected;
+	if (intel_dp_aux_native_read(intel_output,
+				     0x000, dp_priv->dpcd,
+				     sizeof (dp_priv->dpcd)) == sizeof (dp_priv->dpcd))
+	{
+		if (dp_priv->dpcd[0] != 0)
+			status = connector_status_connected;
+	}
+	return status;
+}
+
+static int intel_dp_get_modes(struct drm_connector *connector)
+{
+	struct intel_output *intel_output = to_intel_output(connector);
+
+	/* We should parse the EDID data and find out if it has an audio sink
+	 */
+
+	return intel_ddc_get_modes(intel_output);
+}
+
+static void
+intel_dp_destroy (struct drm_connector *connector)
+{
+	struct intel_output *intel_output = to_intel_output(connector);
+
+	if (intel_output->i2c_bus)
+		intel_i2c_destroy(intel_output->i2c_bus);
+	drm_sysfs_connector_remove(connector);
+	drm_connector_cleanup(connector);
+	kfree(intel_output);
+}
+
+static const struct drm_encoder_helper_funcs intel_dp_helper_funcs = {
+	.dpms = intel_dp_dpms,
+	.mode_fixup = intel_dp_mode_fixup,
+	.prepare = intel_encoder_prepare,
+	.mode_set = intel_dp_mode_set,
+	.commit = intel_encoder_commit,
+};
+
+static const struct drm_connector_funcs intel_dp_connector_funcs = {
+	.dpms = drm_helper_connector_dpms,
+	.save = intel_dp_save,
+	.restore = intel_dp_restore,
+	.detect = intel_dp_detect,
+	.fill_modes = drm_helper_probe_single_connector_modes,
+	.destroy = intel_dp_destroy,
+};
+
+static const struct drm_connector_helper_funcs intel_dp_connector_helper_funcs = {
+	.get_modes = intel_dp_get_modes,
+	.mode_valid = intel_dp_mode_valid,
+	.best_encoder = intel_best_encoder,
+};
+
+static void intel_dp_enc_destroy(struct drm_encoder *encoder)
+{
+	drm_encoder_cleanup(encoder);
+}
+
+static const struct drm_encoder_funcs intel_dp_enc_funcs = {
+	.destroy = intel_dp_enc_destroy,
+};
+
+void
+intel_dp_hot_plug(struct intel_output *intel_output)
+{
+	struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+
+	if (dp_priv->dpms_mode == DRM_MODE_DPMS_ON)
+		intel_dp_check_link_status(intel_output);
+}
+
+void
+intel_dp_init(struct drm_device *dev, int output_reg)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct drm_connector *connector;
+	struct intel_output *intel_output;
+	struct intel_dp_priv *dp_priv;
+
+	intel_output = kcalloc(sizeof(struct intel_output) + 
+			       sizeof(struct intel_dp_priv), 1, GFP_KERNEL);
+	if (!intel_output)
+		return;
+
+	dp_priv = (struct intel_dp_priv *)(intel_output + 1);
+
+	connector = &intel_output->base;
+	drm_connector_init(dev, connector, &intel_dp_connector_funcs,
+			   DRM_MODE_CONNECTOR_DisplayPort);
+	drm_connector_helper_add(connector, &intel_dp_connector_helper_funcs);
+
+	intel_output->type = INTEL_OUTPUT_DISPLAYPORT;
+
+	connector->interlace_allowed = true;
+	connector->doublescan_allowed = 0;
+
+	dp_priv->intel_output = intel_output;
+	dp_priv->output_reg = output_reg;
+	dp_priv->has_audio = false;
+	dp_priv->dpms_mode = DRM_MODE_DPMS_ON;
+	intel_output->dev_priv = dp_priv;
+
+	drm_encoder_init(dev, &intel_output->enc, &intel_dp_enc_funcs,
+			 DRM_MODE_ENCODER_TMDS);
+	drm_encoder_helper_add(&intel_output->enc, &intel_dp_helper_funcs);
+
+	drm_mode_connector_attach_encoder(&intel_output->base,
+					  &intel_output->enc);
+	drm_sysfs_connector_add(connector);
+
+	/* Set up the DDC bus. */
+	intel_dp_i2c_init(intel_output,
+			  (output_reg == DP_B) ? "DPDDC-B" :
+			  (output_reg == DP_C) ? "DPDDC-C" : "DPDDC-D");
+	intel_output->ddc_bus = &dp_priv->adapter;
+	intel_output->hot_plug = intel_dp_hot_plug;
+
+	/* For G4X desktop chip, PEG_BAND_GAP_DATA 3:0 must first be written
+	 * 0xd.  Failure to do so will result in spurious interrupts being
+	 * generated on the port when a cable is not attached.
+	 */
+	if (IS_G4X(dev) && !IS_GM45(dev)) {
+		u32 temp = I915_READ(PEG_BAND_GAP_DATA);
+		I915_WRITE(PEG_BAND_GAP_DATA, (temp & ~0xf) | 0xd);
+	}
+}
diff --git a/drivers/gpu/drm/i915/intel_dp.h b/drivers/gpu/drm/i915/intel_dp.h
new file mode 100644
index 0000000..2b38054
--- /dev/null
+++ b/drivers/gpu/drm/i915/intel_dp.h
@@ -0,0 +1,144 @@
+/*
+ * Copyright © 2008 Keith Packard
+ *
+ * Permission to use, copy, modify, distribute, and sell this software and its
+ * documentation for any purpose is hereby granted without fee, provided that
+ * the above copyright notice appear in all copies and that both that copyright
+ * notice and this permission notice appear in supporting documentation, and
+ * that the name of the copyright holders not be used in advertising or
+ * publicity pertaining to distribution of the software without specific,
+ * written prior permission.  The copyright holders make no representations
+ * about the suitability of this software for any purpose.  It is provided "as
+ * is" without express or implied warranty.
+ *
+ * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
+ * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
+ * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
+ * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
+ * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
+ * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
+ * OF THIS SOFTWARE.
+ */
+
+#ifndef _INTEL_DP_H_
+#define _INTEL_DP_H_
+
+/* From the VESA DisplayPort spec */
+
+#define AUX_NATIVE_WRITE	0x8
+#define AUX_NATIVE_READ		0x9
+#define AUX_I2C_WRITE		0x0
+#define AUX_I2C_READ		0x1
+#define AUX_I2C_STATUS		0x2
+#define AUX_I2C_MOT		0x4
+
+#define AUX_NATIVE_REPLY_ACK	(0x0 << 4)
+#define AUX_NATIVE_REPLY_NACK	(0x1 << 4)
+#define AUX_NATIVE_REPLY_DEFER	(0x2 << 4)
+#define AUX_NATIVE_REPLY_MASK	(0x3 << 4)
+
+#define AUX_I2C_REPLY_ACK	(0x0 << 6)
+#define AUX_I2C_REPLY_NACK	(0x1 << 6)
+#define AUX_I2C_REPLY_DEFER	(0x2 << 6)
+#define AUX_I2C_REPLY_MASK	(0x3 << 6)
+
+/* AUX CH addresses */
+#define	DP_LINK_BW_SET		0x100
+# define DP_LINK_BW_1_62		    0x06
+# define DP_LINK_BW_2_7			    0x0a
+
+#define DP_LANE_COUNT_SET	0x101
+# define DP_LANE_COUNT_MASK		    0x0f
+# define DP_LANE_COUNT_ENHANCED_FRAME_EN    (1 << 7)
+
+#define DP_TRAINING_PATTERN_SET	0x102
+
+# define DP_TRAINING_PATTERN_DISABLE	    0
+# define DP_TRAINING_PATTERN_1		    1
+# define DP_TRAINING_PATTERN_2		    2
+# define DP_TRAINING_PATTERN_MASK	    0x3
+
+# define DP_LINK_QUAL_PATTERN_DISABLE	    (0 << 2)
+# define DP_LINK_QUAL_PATTERN_D10_2	    (1 << 2)
+# define DP_LINK_QUAL_PATTERN_ERROR_RATE    (2 << 2)
+# define DP_LINK_QUAL_PATTERN_PRBS7	    (3 << 2)
+# define DP_LINK_QUAL_PATTERN_MASK	    (3 << 2)
+
+# define DP_RECOVERED_CLOCK_OUT_EN	    (1 << 4)
+# define DP_LINK_SCRAMBLING_DISABLE	    (1 << 5)
+
+# define DP_SYMBOL_ERROR_COUNT_BOTH	    (0 << 6)
+# define DP_SYMBOL_ERROR_COUNT_DISPARITY    (1 << 6)
+# define DP_SYMBOL_ERROR_COUNT_SYMBOL	    (2 << 6)
+# define DP_SYMBOL_ERROR_COUNT_MASK	    (3 << 6)
+
+#define DP_TRAINING_LANE0_SET		    0x103
+#define DP_TRAINING_LANE1_SET		    0x104
+#define DP_TRAINING_LANE2_SET		    0x105
+#define DP_TRAINING_LANE3_SET		    0x106
+
+# define DP_TRAIN_VOLTAGE_SWING_MASK	    0x3
+# define DP_TRAIN_VOLTAGE_SWING_SHIFT	    0
+# define DP_TRAIN_MAX_SWING_REACHED	    (1 << 2)
+# define DP_TRAIN_VOLTAGE_SWING_400	    (0 << 0)
+# define DP_TRAIN_VOLTAGE_SWING_600	    (1 << 0)
+# define DP_TRAIN_VOLTAGE_SWING_800	    (2 << 0)
+# define DP_TRAIN_VOLTAGE_SWING_1200	    (3 << 0)
+
+# define DP_TRAIN_PRE_EMPHASIS_MASK	    (3 << 3)
+# define DP_TRAIN_PRE_EMPHASIS_0	    (0 << 3)
+# define DP_TRAIN_PRE_EMPHASIS_3_5	    (1 << 3)
+# define DP_TRAIN_PRE_EMPHASIS_6	    (2 << 3)
+# define DP_TRAIN_PRE_EMPHASIS_9_5	    (3 << 3)
+
+# define DP_TRAIN_PRE_EMPHASIS_SHIFT	    3
+# define DP_TRAIN_MAX_PRE_EMPHASIS_REACHED  (1 << 5)
+
+#define DP_DOWNSPREAD_CTRL		    0x107
+# define DP_SPREAD_AMP_0_5		    (1 << 4)
+
+#define DP_MAIN_LINK_CHANNEL_CODING_SET	    0x108
+# define DP_SET_ANSI_8B10B		    (1 << 0)
+
+#define DP_LANE0_1_STATUS		    0x202
+#define DP_LANE2_3_STATUS		    0x203
+
+# define DP_LANE_CR_DONE		    (1 << 0)
+# define DP_LANE_CHANNEL_EQ_DONE	    (1 << 1)
+# define DP_LANE_SYMBOL_LOCKED		    (1 << 2)
+
+#define DP_LANE_ALIGN_STATUS_UPDATED	    0x204
+
+#define DP_INTERLANE_ALIGN_DONE		    (1 << 0)
+#define DP_DOWNSTREAM_PORT_STATUS_CHANGED   (1 << 6)
+#define DP_LINK_STATUS_UPDATED		    (1 << 7)
+
+#define DP_SINK_STATUS			    0x205
+
+#define DP_RECEIVE_PORT_0_STATUS	    (1 << 0)
+#define DP_RECEIVE_PORT_1_STATUS	    (1 << 1)
+
+#define DP_ADJUST_REQUEST_LANE0_1	    0x206
+#define DP_ADJUST_REQUEST_LANE2_3	    0x207
+
+#define DP_ADJUST_VOLTAGE_SWING_LANE0_MASK  0x03
+#define DP_ADJUST_VOLTAGE_SWING_LANE0_SHIFT 0
+#define DP_ADJUST_PRE_EMPHASIS_LANE0_MASK   0x0c
+#define DP_ADJUST_PRE_EMPHASIS_LANE0_SHIFT  2
+#define DP_ADJUST_VOLTAGE_SWING_LANE1_MASK  0x30
+#define DP_ADJUST_VOLTAGE_SWING_LANE1_SHIFT 4
+#define DP_ADJUST_PRE_EMPHASIS_LANE1_MASK   0xc0
+#define DP_ADJUST_PRE_EMPHASIS_LANE1_SHIFT  6
+
+struct i2c_algo_dp_aux_data {
+	bool running;
+	u16 address;
+	int (*aux_ch) (struct i2c_adapter *adapter,
+		       uint8_t *send, int send_bytes,
+		       uint8_t *recv, int recv_bytes);
+};
+
+int
+i2c_dp_aux_add_bus(struct i2c_adapter *adapter);
+
+#endif /* _INTEL_DP_H_ */
diff --git a/drivers/gpu/drm/i915/intel_dp_i2c.c b/drivers/gpu/drm/i915/intel_dp_i2c.c
new file mode 100644
index 0000000..4e60f14
--- /dev/null
+++ b/drivers/gpu/drm/i915/intel_dp_i2c.c
@@ -0,0 +1,272 @@
+/*
+ * Copyright © 2009 Keith Packard
+ *
+ * Permission to use, copy, modify, distribute, and sell this software and its
+ * documentation for any purpose is hereby granted without fee, provided that
+ * the above copyright notice appear in all copies and that both that copyright
+ * notice and this permission notice appear in supporting documentation, and
+ * that the name of the copyright holders not be used in advertising or
+ * publicity pertaining to distribution of the software without specific,
+ * written prior permission.  The copyright holders make no representations
+ * about the suitability of this software for any purpose.  It is provided "as
+ * is" without express or implied warranty.
+ *
+ * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
+ * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
+ * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
+ * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
+ * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
+ * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
+ * OF THIS SOFTWARE.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/i2c.h>
+#include "intel_dp.h"
+
+/* Run a single AUX_CH I2C transaction, writing/reading data as necessary */
+
+#define MODE_I2C_START	1
+#define MODE_I2C_WRITE	2
+#define MODE_I2C_READ	4
+#define MODE_I2C_STOP	8
+
+static int
+i2c_algo_dp_aux_transaction(struct i2c_adapter *adapter, int mode,
+			    uint8_t write_byte, uint8_t *read_byte)
+{
+	struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data;
+	uint16_t address = algo_data->address;
+	uint8_t msg[5];
+	uint8_t reply[2];
+	int msg_bytes;
+	int reply_bytes;
+	int ret;
+
+	/* Set up the command byte */
+	if (mode & MODE_I2C_READ)
+		msg[0] = AUX_I2C_READ << 4;
+	else
+		msg[0] = AUX_I2C_WRITE << 4;
+
+	if (!(mode & MODE_I2C_STOP))
+		msg[0] |= AUX_I2C_MOT << 4;
+
+	msg[1] = address >> 8;
+	msg[2] = address;
+
+	switch (mode) {
+	case MODE_I2C_WRITE:
+		msg[3] = 0;
+		msg[4] = write_byte;
+		msg_bytes = 5;
+		reply_bytes = 1;
+		break;
+	case MODE_I2C_READ:
+		msg[3] = 0;
+		msg_bytes = 4;
+		reply_bytes = 2;
+		break;
+	default:
+		msg_bytes = 3;
+		reply_bytes = 1;
+		break;
+	}
+
+	for (;;) {
+		ret = (*algo_data->aux_ch)(adapter,
+					   msg, msg_bytes,
+					   reply, reply_bytes);
+		if (ret < 0) {
+			printk(KERN_ERR "aux_ch failed %d\n", ret);
+			return ret;
+		}
+		switch (reply[0] & AUX_I2C_REPLY_MASK) {
+		case AUX_I2C_REPLY_ACK:
+			if (mode == MODE_I2C_READ) {
+				*read_byte = reply[1];
+			}
+			return reply_bytes - 1;
+		case AUX_I2C_REPLY_NACK:
+			printk(KERN_ERR "aux_ch nack\n");
+			return -EREMOTEIO;
+		case AUX_I2C_REPLY_DEFER:
+			printk(KERN_ERR "aux_ch defer\n");
+			udelay(100);
+			break;
+		default:
+			printk(KERN_ERR "aux_ch invalid reply 0x%02x\n", reply[0]);
+			return -EREMOTEIO;
+		}
+	}
+}
+
+/*
+ * I2C over AUX CH
+ */
+
+/*
+ * Send the address. If the I2C link is running, this 'restarts'
+ * the connection with the new address, this is used for doing
+ * a write followed by a read (as needed for DDC)
+ */
+static int
+i2c_algo_dp_aux_address(struct i2c_adapter *adapter, u16 address, bool reading)
+{
+	struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data;
+	int mode = MODE_I2C_START;
+	int ret;
+
+	if (reading)
+		mode |= MODE_I2C_READ;
+	else
+		mode |= MODE_I2C_WRITE;
+	algo_data->address = address;
+	algo_data->running = true;
+	ret = i2c_algo_dp_aux_transaction(adapter, mode, 0, NULL);
+	return ret;
+}
+
+/*
+ * Stop the I2C transaction. This closes out the link, sending
+ * a bare address packet with the MOT bit turned off
+ */
+static void
+i2c_algo_dp_aux_stop(struct i2c_adapter *adapter, bool reading)
+{
+	struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data;
+	int mode = MODE_I2C_STOP;
+
+	if (reading)
+		mode |= MODE_I2C_READ;
+	else
+		mode |= MODE_I2C_WRITE;
+	if (algo_data->running) {
+		(void) i2c_algo_dp_aux_transaction(adapter, mode, 0, NULL);
+		algo_data->running = false;
+	}
+}
+
+/*
+ * Write a single byte to the current I2C address, the
+ * the I2C link must be running or this returns -EIO
+ */
+static int
+i2c_algo_dp_aux_put_byte(struct i2c_adapter *adapter, u8 byte)
+{
+	struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data;
+	int ret;
+
+	if (!algo_data->running)
+		return -EIO;
+
+	ret = i2c_algo_dp_aux_transaction(adapter, MODE_I2C_WRITE, byte, NULL);
+	return ret;
+}
+
+/*
+ * Read a single byte from the current I2C address, the
+ * I2C link must be running or this returns -EIO
+ */
+static int
+i2c_algo_dp_aux_get_byte(struct i2c_adapter *adapter, u8 *byte_ret)
+{
+	struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data;
+	int ret;
+
+	if (!algo_data->running)
+		return -EIO;
+
+	ret = i2c_algo_dp_aux_transaction(adapter, MODE_I2C_READ, 0, byte_ret);
+	return ret;
+}
+
+static int
+i2c_algo_dp_aux_xfer(struct i2c_adapter *adapter,
+		     struct i2c_msg *msgs,
+		     int num)
+{
+	int ret = 0;
+	bool reading = false;
+	int m;
+	int b;
+
+	for (m = 0; m < num; m++) {
+		u16 len = msgs[m].len;
+		u8 *buf = msgs[m].buf;
+		reading = (msgs[m].flags & I2C_M_RD) != 0;
+		ret = i2c_algo_dp_aux_address(adapter, msgs[m].addr, reading);
+		if (ret < 0)
+			break;
+		if (reading) {
+			for (b = 0; b < len; b++) {
+				ret = i2c_algo_dp_aux_get_byte(adapter, &buf[b]);
+				if (ret < 0)
+					break;
+			}
+		} else {
+			for (b = 0; b < len; b++) {
+				ret = i2c_algo_dp_aux_put_byte(adapter, buf[b]);
+				if (ret < 0)
+					break;
+			}
+		}
+		if (ret < 0)
+			break;
+	}
+	if (ret >= 0)
+		ret = num;
+	i2c_algo_dp_aux_stop(adapter, reading);
+	printk(KERN_ERR "dp_aux_xfer return %d\n", ret);
+	return ret;
+}
+
+static u32
+i2c_algo_dp_aux_functionality(struct i2c_adapter *adapter)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL |
+	       I2C_FUNC_SMBUS_READ_BLOCK_DATA |
+	       I2C_FUNC_SMBUS_BLOCK_PROC_CALL |
+	       I2C_FUNC_10BIT_ADDR;
+}
+
+static const struct i2c_algorithm i2c_dp_aux_algo = {
+	.master_xfer	= i2c_algo_dp_aux_xfer,
+	.functionality	= i2c_algo_dp_aux_functionality,
+};
+
+static void
+i2c_dp_aux_reset_bus(struct i2c_adapter *adapter)
+{
+	(void) i2c_algo_dp_aux_address(adapter, 0, false);
+	(void) i2c_algo_dp_aux_stop(adapter, false);
+					   
+}
+
+static int
+i2c_dp_aux_prepare_bus(struct i2c_adapter *adapter)
+{
+	adapter->algo = &i2c_dp_aux_algo;
+	adapter->retries = 3;
+	i2c_dp_aux_reset_bus(adapter);
+	return 0;
+}
+
+int
+i2c_dp_aux_add_bus(struct i2c_adapter *adapter)
+{
+	int error;
+	
+	error = i2c_dp_aux_prepare_bus(adapter);
+	if (error)
+		return error;
+	error = i2c_add_adapter(adapter);
+	return error;
+}
+EXPORT_SYMBOL(i2c_dp_aux_add_bus);
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index cd4b9c5..004541c 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -54,6 +54,7 @@
 #define INTEL_OUTPUT_LVDS 4
 #define INTEL_OUTPUT_TVOUT 5
 #define INTEL_OUTPUT_HDMI 6
+#define INTEL_OUTPUT_DISPLAYPORT 7
 
 #define INTEL_DVO_CHIP_NONE 0
 #define INTEL_DVO_CHIP_LVDS 1
@@ -65,7 +66,6 @@
 	u32 reg; /* GPIO reg */
 	struct i2c_adapter adapter;
 	struct i2c_algo_bit_data algo;
-        u8 slave_addr;
 };
 
 struct intel_framebuffer {
@@ -79,11 +79,12 @@
 
 	struct drm_encoder enc;
 	int type;
-	struct intel_i2c_chan *i2c_bus; /* for control functions */
-	struct intel_i2c_chan *ddc_bus; /* for DDC only stuff */
+	struct i2c_adapter *i2c_bus;
+	struct i2c_adapter *ddc_bus;
 	bool load_detect_temp;
 	bool needs_tv_clock;
 	void *dev_priv;
+	void (*hot_plug)(struct intel_output *);
 };
 
 struct intel_crtc {
@@ -104,9 +105,9 @@
 #define enc_to_intel_output(x) container_of(x, struct intel_output, enc)
 #define to_intel_framebuffer(x) container_of(x, struct intel_framebuffer, base)
 
-struct intel_i2c_chan *intel_i2c_create(struct drm_device *dev, const u32 reg,
-					const char *name);
-void intel_i2c_destroy(struct intel_i2c_chan *chan);
+struct i2c_adapter *intel_i2c_create(struct drm_device *dev, const u32 reg,
+				     const char *name);
+void intel_i2c_destroy(struct i2c_adapter *adapter);
 int intel_ddc_get_modes(struct intel_output *intel_output);
 extern bool intel_ddc_probe(struct intel_output *intel_output);
 void intel_i2c_quirk_set(struct drm_device *dev, bool enable);
@@ -116,6 +117,10 @@
 extern void intel_dvo_init(struct drm_device *dev);
 extern void intel_tv_init(struct drm_device *dev);
 extern void intel_lvds_init(struct drm_device *dev);
+extern void intel_dp_init(struct drm_device *dev, int dp_reg);
+void
+intel_dp_set_m_n(struct drm_crtc *crtc, struct drm_display_mode *mode,
+		 struct drm_display_mode *adjusted_mode);
 
 extern void intel_crtc_load_lut(struct drm_crtc *crtc);
 extern void intel_encoder_prepare (struct drm_encoder *encoder);
diff --git a/drivers/gpu/drm/i915/intel_dvo.c b/drivers/gpu/drm/i915/intel_dvo.c
index 1ee3007..13bff209 100644
--- a/drivers/gpu/drm/i915/intel_dvo.c
+++ b/drivers/gpu/drm/i915/intel_dvo.c
@@ -384,10 +384,9 @@
 {
 	struct intel_output *intel_output;
 	struct intel_dvo_device *dvo;
-	struct intel_i2c_chan *i2cbus = NULL;
+	struct i2c_adapter *i2cbus = NULL;
 	int ret = 0;
 	int i;
-	int gpio_inited = 0;
 	int encoder_type = DRM_MODE_ENCODER_NONE;
 	intel_output = kzalloc (sizeof(struct intel_output), GFP_KERNEL);
 	if (!intel_output)
@@ -420,14 +419,11 @@
 		 * It appears that everything is on GPIOE except for panels
 		 * on i830 laptops, which are on GPIOB (DVOA).
 		 */
-		if (gpio_inited != gpio) {
-			if (i2cbus != NULL)
-				intel_i2c_destroy(i2cbus);
-			if (!(i2cbus = intel_i2c_create(dev, gpio,
-				gpio == GPIOB ? "DVOI2C_B" : "DVOI2C_E"))) {
-				continue;
-			}
-			gpio_inited = gpio;
+		if (i2cbus != NULL)
+			intel_i2c_destroy(i2cbus);
+		if (!(i2cbus = intel_i2c_create(dev, gpio,
+			gpio == GPIOB ? "DVOI2C_B" : "DVOI2C_E"))) {
+			continue;
 		}
 
 		if (dvo->dev_ops!= NULL)
diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
index 4ea2a65..9e30daa 100644
--- a/drivers/gpu/drm/i915/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/intel_hdmi.c
@@ -31,6 +31,7 @@
 #include "drmP.h"
 #include "drm.h"
 #include "drm_crtc.h"
+#include "drm_edid.h"
 #include "intel_drv.h"
 #include "i915_drm.h"
 #include "i915_drv.h"
@@ -56,8 +57,7 @@
 	sdvox = SDVO_ENCODING_HDMI |
 		SDVO_BORDER_ENABLE |
 		SDVO_VSYNC_ACTIVE_HIGH |
-		SDVO_HSYNC_ACTIVE_HIGH |
-		SDVO_NULL_PACKETS_DURING_VSYNC;
+		SDVO_HSYNC_ACTIVE_HIGH;
 
 	if (hdmi_priv->has_hdmi_sink)
 		sdvox |= SDVO_AUDIO_ENABLE;
@@ -129,20 +129,26 @@
 	return true;
 }
 
-static void
-intel_hdmi_sink_detect(struct drm_connector *connector)
+static enum drm_connector_status
+intel_hdmi_edid_detect(struct drm_connector *connector)
 {
 	struct intel_output *intel_output = to_intel_output(connector);
 	struct intel_hdmi_priv *hdmi_priv = intel_output->dev_priv;
 	struct edid *edid = NULL;
+	enum drm_connector_status status = connector_status_disconnected;
 
 	edid = drm_get_edid(&intel_output->base,
-			    &intel_output->ddc_bus->adapter);
-	if (edid != NULL) {
-		hdmi_priv->has_hdmi_sink = drm_detect_hdmi_monitor(edid);
-		kfree(edid);
+			    intel_output->ddc_bus);
+	hdmi_priv->has_hdmi_sink = false;
+	if (edid) {
+		if (edid->input & DRM_EDID_INPUT_DIGITAL) {
+			status = connector_status_connected;
+			hdmi_priv->has_hdmi_sink = drm_detect_hdmi_monitor(edid);
+		}
 		intel_output->base.display_info.raw_edid = NULL;
+		kfree(edid);
 	}
+	return status;
 }
 
 static enum drm_connector_status
@@ -154,11 +160,7 @@
 	/* FIXME hotplug detect */
 
 	hdmi_priv->has_hdmi_sink = false;
-	intel_hdmi_sink_detect(connector);
-	if (hdmi_priv->has_hdmi_sink)
-		return connector_status_connected;
-	else
-		return connector_status_disconnected;
+	return intel_hdmi_edid_detect(connector);
 }
 
 static enum drm_connector_status
@@ -201,10 +203,9 @@
 		return connector_status_unknown;
 	}
 
-	if ((I915_READ(PORT_HOTPLUG_STAT) & bit) != 0) {
-		intel_hdmi_sink_detect(connector);
-		return connector_status_connected;
-	} else
+	if ((I915_READ(PORT_HOTPLUG_STAT) & bit) != 0)
+		return intel_hdmi_edid_detect(connector);
+	else
 		return connector_status_disconnected;
 }
 
diff --git a/drivers/gpu/drm/i915/intel_i2c.c b/drivers/gpu/drm/i915/intel_i2c.c
index f7061f6..62b8bea 100644
--- a/drivers/gpu/drm/i915/intel_i2c.c
+++ b/drivers/gpu/drm/i915/intel_i2c.c
@@ -124,6 +124,7 @@
  * @output: driver specific output device
  * @reg: GPIO reg to use
  * @name: name for this bus
+ * @slave_addr: slave address (if fixed)
  *
  * Creates and registers a new i2c bus with the Linux i2c layer, for use
  * in output probing and control (e.g. DDC or SDVO control functions).
@@ -139,8 +140,8 @@
  *   %GPIOH
  * see PRM for details on how these different busses are used.
  */
-struct intel_i2c_chan *intel_i2c_create(struct drm_device *dev, const u32 reg,
-					const char *name)
+struct i2c_adapter *intel_i2c_create(struct drm_device *dev, const u32 reg,
+				     const char *name)
 {
 	struct intel_i2c_chan *chan;
 
@@ -174,7 +175,7 @@
 	intel_i2c_quirk_set(dev, false);
 	udelay(20);
 
-	return chan;
+	return &chan->adapter;
 
 out_free:
 	kfree(chan);
@@ -187,11 +188,16 @@
  *
  * Unregister the adapter from the i2c layer, then free the structure.
  */
-void intel_i2c_destroy(struct intel_i2c_chan *chan)
+void intel_i2c_destroy(struct i2c_adapter *adapter)
 {
-	if (!chan)
+	struct intel_i2c_chan *chan;
+
+	if (!adapter)
 		return;
 
+	chan = container_of(adapter,
+			    struct intel_i2c_chan,
+			    adapter);
 	i2c_del_adapter(&chan->adapter);
 	kfree(chan);
 }
diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index f073ed8..9564ca4 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -39,6 +39,21 @@
 
 #define I915_LVDS "i915_lvds"
 
+/*
+ * the following four scaling options are defined.
+ * #define DRM_MODE_SCALE_NON_GPU	0
+ * #define DRM_MODE_SCALE_FULLSCREEN	1
+ * #define DRM_MODE_SCALE_NO_SCALE	2
+ * #define DRM_MODE_SCALE_ASPECT	3
+ */
+
+/* Private structure for the integrated LVDS support */
+struct intel_lvds_priv {
+	int fitting_mode;
+	u32 pfit_control;
+	u32 pfit_pgm_ratios;
+};
+
 /**
  * Sets the backlight level.
  *
@@ -213,10 +228,27 @@
 				  struct drm_display_mode *mode,
 				  struct drm_display_mode *adjusted_mode)
 {
+	/*
+	 * float point operation is not supported . So the PANEL_RATIO_FACTOR
+	 * is defined, which can avoid the float point computation when
+	 * calculating the panel ratio.
+	 */
+#define PANEL_RATIO_FACTOR 8192
 	struct drm_device *dev = encoder->dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc);
 	struct drm_encoder *tmp_encoder;
+	struct intel_output *intel_output = enc_to_intel_output(encoder);
+	struct intel_lvds_priv *lvds_priv = intel_output->dev_priv;
+	u32 pfit_control = 0, pfit_pgm_ratios = 0;
+	int left_border = 0, right_border = 0, top_border = 0;
+	int bottom_border = 0;
+	bool border = 0;
+	int panel_ratio, desired_ratio, vert_scale, horiz_scale;
+	int horiz_ratio, vert_ratio;
+	u32 hsync_width, vsync_width;
+	u32 hblank_width, vblank_width;
+	u32 hsync_pos, vsync_pos;
 
 	/* Should never happen!! */
 	if (!IS_I965G(dev) && intel_crtc->pipe == 0) {
@@ -232,7 +264,9 @@
 			return false;
 		}
 	}
-
+	/* If we don't have a panel mode, there is nothing we can do */
+	if (dev_priv->panel_fixed_mode == NULL)
+		return true;
 	/*
 	 * If we have timings from the BIOS for the panel, put them in
 	 * to the adjusted mode.  The CRTC will be set up for this mode,
@@ -256,6 +290,243 @@
 		drm_mode_set_crtcinfo(adjusted_mode, CRTC_INTERLACE_HALVE_V);
 	}
 
+	/* Make sure pre-965s set dither correctly */
+	if (!IS_I965G(dev)) {
+		if (dev_priv->panel_wants_dither || dev_priv->lvds_dither)
+			pfit_control |= PANEL_8TO6_DITHER_ENABLE;
+	}
+
+	/* Native modes don't need fitting */
+	if (adjusted_mode->hdisplay == mode->hdisplay &&
+			adjusted_mode->vdisplay == mode->vdisplay) {
+		pfit_pgm_ratios = 0;
+		border = 0;
+		goto out;
+	}
+
+	/* 965+ wants fuzzy fitting */
+	if (IS_I965G(dev))
+		pfit_control |= (intel_crtc->pipe << PFIT_PIPE_SHIFT) |
+					PFIT_FILTER_FUZZY;
+
+	hsync_width = adjusted_mode->crtc_hsync_end -
+					adjusted_mode->crtc_hsync_start;
+	vsync_width = adjusted_mode->crtc_vsync_end -
+					adjusted_mode->crtc_vsync_start;
+	hblank_width = adjusted_mode->crtc_hblank_end -
+					adjusted_mode->crtc_hblank_start;
+	vblank_width = adjusted_mode->crtc_vblank_end -
+					adjusted_mode->crtc_vblank_start;
+	/*
+	 * Deal with panel fitting options. Figure out how to stretch the
+	 * image based on its aspect ratio & the current panel fitting mode.
+	 */
+	panel_ratio = adjusted_mode->hdisplay * PANEL_RATIO_FACTOR /
+				adjusted_mode->vdisplay;
+	desired_ratio = mode->hdisplay * PANEL_RATIO_FACTOR /
+				mode->vdisplay;
+	/*
+	 * Enable automatic panel scaling for non-native modes so that they fill
+	 * the screen.  Should be enabled before the pipe is enabled, according
+	 * to register description and PRM.
+	 * Change the value here to see the borders for debugging
+	 */
+	I915_WRITE(BCLRPAT_A, 0);
+	I915_WRITE(BCLRPAT_B, 0);
+
+	switch (lvds_priv->fitting_mode) {
+	case DRM_MODE_SCALE_NO_SCALE:
+		/*
+		 * For centered modes, we have to calculate border widths &
+		 * heights and modify the values programmed into the CRTC.
+		 */
+		left_border = (adjusted_mode->hdisplay - mode->hdisplay) / 2;
+		right_border = left_border;
+		if (mode->hdisplay & 1)
+			right_border++;
+		top_border = (adjusted_mode->vdisplay - mode->vdisplay) / 2;
+		bottom_border = top_border;
+		if (mode->vdisplay & 1)
+			bottom_border++;
+		/* Set active & border values */
+		adjusted_mode->crtc_hdisplay = mode->hdisplay;
+		/* Keep the boder be even */
+		if (right_border & 1)
+			right_border++;
+		/* use the border directly instead of border minuse one */
+		adjusted_mode->crtc_hblank_start = mode->hdisplay +
+						right_border;
+		/* keep the blank width constant */
+		adjusted_mode->crtc_hblank_end =
+			adjusted_mode->crtc_hblank_start + hblank_width;
+		/* get the hsync pos relative to hblank start */
+		hsync_pos = (hblank_width - hsync_width) / 2;
+		/* keep the hsync pos be even */
+		if (hsync_pos & 1)
+			hsync_pos++;
+		adjusted_mode->crtc_hsync_start =
+				adjusted_mode->crtc_hblank_start + hsync_pos;
+		/* keep the hsync width constant */
+		adjusted_mode->crtc_hsync_end =
+				adjusted_mode->crtc_hsync_start + hsync_width;
+		adjusted_mode->crtc_vdisplay = mode->vdisplay;
+		/* use the border instead of border minus one */
+		adjusted_mode->crtc_vblank_start = mode->vdisplay +
+						bottom_border;
+		/* keep the vblank width constant */
+		adjusted_mode->crtc_vblank_end =
+				adjusted_mode->crtc_vblank_start + vblank_width;
+		/* get the vsync start postion relative to vblank start */
+		vsync_pos = (vblank_width - vsync_width) / 2;
+		adjusted_mode->crtc_vsync_start =
+				adjusted_mode->crtc_vblank_start + vsync_pos;
+		/* keep the vsync width constant */
+		adjusted_mode->crtc_vsync_end =
+				adjusted_mode->crtc_vblank_start + vsync_width;
+		border = 1;
+		break;
+	case DRM_MODE_SCALE_ASPECT:
+		/* Scale but preserve the spect ratio */
+		pfit_control |= PFIT_ENABLE;
+		if (IS_I965G(dev)) {
+			/* 965+ is easy, it does everything in hw */
+			if (panel_ratio > desired_ratio)
+				pfit_control |= PFIT_SCALING_PILLAR;
+			else if (panel_ratio < desired_ratio)
+				pfit_control |= PFIT_SCALING_LETTER;
+			else
+				pfit_control |= PFIT_SCALING_AUTO;
+		} else {
+			/*
+			 * For earlier chips we have to calculate the scaling
+			 * ratio by hand and program it into the
+			 * PFIT_PGM_RATIO register
+			 */
+			u32 horiz_bits, vert_bits, bits = 12;
+			horiz_ratio = mode->hdisplay * PANEL_RATIO_FACTOR/
+						adjusted_mode->hdisplay;
+			vert_ratio = mode->vdisplay * PANEL_RATIO_FACTOR/
+						adjusted_mode->vdisplay;
+			horiz_scale = adjusted_mode->hdisplay *
+					PANEL_RATIO_FACTOR / mode->hdisplay;
+			vert_scale = adjusted_mode->vdisplay *
+					PANEL_RATIO_FACTOR / mode->vdisplay;
+
+			/* retain aspect ratio */
+			if (panel_ratio > desired_ratio) { /* Pillar */
+				u32 scaled_width;
+				scaled_width = mode->hdisplay * vert_scale /
+						PANEL_RATIO_FACTOR;
+				horiz_ratio = vert_ratio;
+				pfit_control |= (VERT_AUTO_SCALE |
+						 VERT_INTERP_BILINEAR |
+						 HORIZ_INTERP_BILINEAR);
+				/* Pillar will have left/right borders */
+				left_border = (adjusted_mode->hdisplay -
+						scaled_width) / 2;
+				right_border = left_border;
+				if (mode->hdisplay & 1) /* odd resolutions */
+					right_border++;
+				/* keep the border be even */
+				if (right_border & 1)
+					right_border++;
+				adjusted_mode->crtc_hdisplay = scaled_width;
+				/* use border instead of border minus one */
+				adjusted_mode->crtc_hblank_start =
+					scaled_width + right_border;
+				/* keep the hblank width constant */
+				adjusted_mode->crtc_hblank_end =
+					adjusted_mode->crtc_hblank_start +
+							hblank_width;
+				/*
+				 * get the hsync start pos relative to
+				 * hblank start
+				 */
+				hsync_pos = (hblank_width - hsync_width) / 2;
+				/* keep the hsync_pos be even */
+				if (hsync_pos & 1)
+					hsync_pos++;
+				adjusted_mode->crtc_hsync_start =
+					adjusted_mode->crtc_hblank_start +
+							hsync_pos;
+				/* keept hsync width constant */
+				adjusted_mode->crtc_hsync_end =
+					adjusted_mode->crtc_hsync_start +
+							hsync_width;
+				border = 1;
+			} else if (panel_ratio < desired_ratio) { /* letter */
+				u32 scaled_height = mode->vdisplay *
+					horiz_scale / PANEL_RATIO_FACTOR;
+				vert_ratio = horiz_ratio;
+				pfit_control |= (HORIZ_AUTO_SCALE |
+						 VERT_INTERP_BILINEAR |
+						 HORIZ_INTERP_BILINEAR);
+				/* Letterbox will have top/bottom border */
+				top_border = (adjusted_mode->vdisplay -
+					scaled_height) / 2;
+				bottom_border = top_border;
+				if (mode->vdisplay & 1)
+					bottom_border++;
+				adjusted_mode->crtc_vdisplay = scaled_height;
+				/* use border instead of border minus one */
+				adjusted_mode->crtc_vblank_start =
+					scaled_height + bottom_border;
+				/* keep the vblank width constant */
+				adjusted_mode->crtc_vblank_end =
+					adjusted_mode->crtc_vblank_start +
+							vblank_width;
+				/*
+				 * get the vsync start pos relative to
+				 * vblank start
+				 */
+				vsync_pos = (vblank_width - vsync_width) / 2;
+				adjusted_mode->crtc_vsync_start =
+					adjusted_mode->crtc_vblank_start +
+							vsync_pos;
+				/* keep the vsync width constant */
+				adjusted_mode->crtc_vsync_end =
+					adjusted_mode->crtc_vsync_start +
+							vsync_width;
+				border = 1;
+			} else {
+			/* Aspects match, Let hw scale both directions */
+				pfit_control |= (VERT_AUTO_SCALE |
+						 HORIZ_AUTO_SCALE |
+						 VERT_INTERP_BILINEAR |
+						 HORIZ_INTERP_BILINEAR);
+			}
+			horiz_bits = (1 << bits) * horiz_ratio /
+					PANEL_RATIO_FACTOR;
+			vert_bits = (1 << bits) * vert_ratio /
+					PANEL_RATIO_FACTOR;
+			pfit_pgm_ratios =
+				((vert_bits << PFIT_VERT_SCALE_SHIFT) &
+						PFIT_VERT_SCALE_MASK) |
+				((horiz_bits << PFIT_HORIZ_SCALE_SHIFT) &
+						PFIT_HORIZ_SCALE_MASK);
+		}
+		break;
+
+	case DRM_MODE_SCALE_FULLSCREEN:
+		/*
+		 * Full scaling, even if it changes the aspect ratio.
+		 * Fortunately this is all done for us in hw.
+		 */
+		pfit_control |= PFIT_ENABLE;
+		if (IS_I965G(dev))
+			pfit_control |= PFIT_SCALING_AUTO;
+		else
+			pfit_control |= (VERT_AUTO_SCALE | HORIZ_AUTO_SCALE |
+					 VERT_INTERP_BILINEAR |
+					 HORIZ_INTERP_BILINEAR);
+		break;
+	default:
+		break;
+	}
+
+out:
+	lvds_priv->pfit_control = pfit_control;
+	lvds_priv->pfit_pgm_ratios = pfit_pgm_ratios;
 	/*
 	 * XXX: It would be nice to support lower refresh rates on the
 	 * panels to reduce power consumption, and perhaps match the
@@ -301,8 +572,8 @@
 {
 	struct drm_device *dev = encoder->dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc);
-	u32 pfit_control;
+	struct intel_output *intel_output = enc_to_intel_output(encoder);
+	struct intel_lvds_priv *lvds_priv = intel_output->dev_priv;
 
 	/*
 	 * The LVDS pin pair will already have been turned on in the
@@ -319,22 +590,8 @@
 	 * screen.  Should be enabled before the pipe is enabled, according to
 	 * register description and PRM.
 	 */
-	if (mode->hdisplay != adjusted_mode->hdisplay ||
-	    mode->vdisplay != adjusted_mode->vdisplay)
-		pfit_control = (PFIT_ENABLE | VERT_AUTO_SCALE |
-				HORIZ_AUTO_SCALE | VERT_INTERP_BILINEAR |
-				HORIZ_INTERP_BILINEAR);
-	else
-		pfit_control = 0;
-
-	if (!IS_I965G(dev)) {
-		if (dev_priv->panel_wants_dither || dev_priv->lvds_dither)
-			pfit_control |= PANEL_8TO6_DITHER_ENABLE;
-	}
-	else
-		pfit_control |= intel_crtc->pipe << PFIT_PIPE_SHIFT;
-
-	I915_WRITE(PFIT_CONTROL, pfit_control);
+	I915_WRITE(PFIT_PGM_RATIOS, lvds_priv->pfit_pgm_ratios);
+	I915_WRITE(PFIT_CONTROL, lvds_priv->pfit_control);
 }
 
 /**
@@ -406,6 +663,34 @@
 				   struct drm_property *property,
 				   uint64_t value)
 {
+	struct drm_device *dev = connector->dev;
+	struct intel_output *intel_output =
+			to_intel_output(connector);
+
+	if (property == dev->mode_config.scaling_mode_property &&
+				connector->encoder) {
+		struct drm_crtc *crtc = connector->encoder->crtc;
+		struct intel_lvds_priv *lvds_priv = intel_output->dev_priv;
+		if (value == DRM_MODE_SCALE_NON_GPU) {
+			DRM_DEBUG_KMS(I915_LVDS,
+					"non_GPU property is unsupported\n");
+			return 0;
+		}
+		if (lvds_priv->fitting_mode == value) {
+			/* the LVDS scaling property is not changed */
+			return 0;
+		}
+		lvds_priv->fitting_mode = value;
+		if (crtc && crtc->enabled) {
+			/*
+			 * If the CRTC is enabled, the display will be changed
+			 * according to the new panel fitting mode.
+			 */
+			drm_crtc_helper_set_mode(crtc, &crtc->mode,
+				crtc->x, crtc->y, crtc->fb);
+		}
+	}
+
 	return 0;
 }
 
@@ -456,7 +741,7 @@
 		.callback = intel_no_lvds_dmi_callback,
 		.ident = "Apple Mac Mini (Core series)",
 		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
+			DMI_MATCH(DMI_SYS_VENDOR, "Apple"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "Macmini1,1"),
 		},
 	},
@@ -464,7 +749,7 @@
 		.callback = intel_no_lvds_dmi_callback,
 		.ident = "Apple Mac Mini (Core 2 series)",
 		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
+			DMI_MATCH(DMI_SYS_VENDOR, "Apple"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "Macmini2,1"),
 		},
 	},
@@ -518,6 +803,7 @@
 	struct drm_encoder *encoder;
 	struct drm_display_mode *scan; /* *modes, *bios_mode; */
 	struct drm_crtc *crtc;
+	struct intel_lvds_priv *lvds_priv;
 	u32 lvds;
 	int pipe, gpio = GPIOC;
 
@@ -531,7 +817,8 @@
 		gpio = PCH_GPIOC;
 	}
 
-	intel_output = kzalloc(sizeof(struct intel_output), GFP_KERNEL);
+	intel_output = kzalloc(sizeof(struct intel_output) +
+				sizeof(struct intel_lvds_priv), GFP_KERNEL);
 	if (!intel_output) {
 		return;
 	}
@@ -553,7 +840,18 @@
 	connector->interlace_allowed = false;
 	connector->doublescan_allowed = false;
 
+	lvds_priv = (struct intel_lvds_priv *)(intel_output + 1);
+	intel_output->dev_priv = lvds_priv;
+	/* create the scaling mode property */
+	drm_mode_create_scaling_mode_property(dev);
+	/*
+	 * the initial panel fitting mode will be FULL_SCREEN.
+	 */
 
+	drm_connector_attach_property(&intel_output->base,
+				      dev->mode_config.scaling_mode_property,
+				      DRM_MODE_SCALE_FULLSCREEN);
+	lvds_priv->fitting_mode = DRM_MODE_SCALE_FULLSCREEN;
 	/*
 	 * LVDS discovery:
 	 * 1) check for EDID on DDC
@@ -649,5 +947,5 @@
 	if (intel_output->ddc_bus)
 		intel_i2c_destroy(intel_output->ddc_bus);
 	drm_connector_cleanup(connector);
-	kfree(connector);
+	kfree(intel_output);
 }
diff --git a/drivers/gpu/drm/i915/intel_modes.c b/drivers/gpu/drm/i915/intel_modes.c
index e0910fe..67e2f46 100644
--- a/drivers/gpu/drm/i915/intel_modes.c
+++ b/drivers/gpu/drm/i915/intel_modes.c
@@ -53,10 +53,9 @@
 		}
 	};
 
-	intel_i2c_quirk_set(intel_output->ddc_bus->drm_dev, true);
-	ret = i2c_transfer(&intel_output->ddc_bus->adapter, msgs, 2);
-	intel_i2c_quirk_set(intel_output->ddc_bus->drm_dev, false);
-
+	intel_i2c_quirk_set(intel_output->base.dev, true);
+	ret = i2c_transfer(intel_output->ddc_bus, msgs, 2);
+	intel_i2c_quirk_set(intel_output->base.dev, false);
 	if (ret == 2)
 		return true;
 
@@ -74,10 +73,9 @@
 	struct edid *edid;
 	int ret = 0;
 
-	intel_i2c_quirk_set(intel_output->ddc_bus->drm_dev, true);
-	edid = drm_get_edid(&intel_output->base,
-			    &intel_output->ddc_bus->adapter);
-	intel_i2c_quirk_set(intel_output->ddc_bus->drm_dev, false);
+	intel_i2c_quirk_set(intel_output->base.dev, true);
+	edid = drm_get_edid(&intel_output->base, intel_output->ddc_bus);
+	intel_i2c_quirk_set(intel_output->base.dev, false);
 	if (edid) {
 		drm_mode_connector_update_edid_property(&intel_output->base,
 							edid);
diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c
index 9a00adb..f034737 100644
--- a/drivers/gpu/drm/i915/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@@ -38,8 +38,7 @@
 #undef SDVO_DEBUG
 #define I915_SDVO	"i915_sdvo"
 struct intel_sdvo_priv {
-	struct intel_i2c_chan *i2c_bus;
-	int slaveaddr;
+	u8 slave_addr;
 
 	/* Register for the SDVO device: SDVOB or SDVOC */
 	int output_device;
@@ -146,13 +145,13 @@
 
 	struct i2c_msg msgs[] = {
 		{
-			.addr = sdvo_priv->i2c_bus->slave_addr,
+			.addr = sdvo_priv->slave_addr >> 1,
 			.flags = 0,
 			.len = 1,
 			.buf = out_buf,
 		},
 		{
-			.addr = sdvo_priv->i2c_bus->slave_addr,
+			.addr = sdvo_priv->slave_addr >> 1,
 			.flags = I2C_M_RD,
 			.len = 1,
 			.buf = buf,
@@ -162,7 +161,7 @@
 	out_buf[0] = addr;
 	out_buf[1] = 0;
 
-	if ((ret = i2c_transfer(&sdvo_priv->i2c_bus->adapter, msgs, 2)) == 2)
+	if ((ret = i2c_transfer(intel_output->i2c_bus, msgs, 2)) == 2)
 	{
 		*ch = buf[0];
 		return true;
@@ -175,10 +174,11 @@
 static bool intel_sdvo_write_byte(struct intel_output *intel_output, int addr,
 				  u8 ch)
 {
+	struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv;
 	u8 out_buf[2];
 	struct i2c_msg msgs[] = {
 		{
-			.addr = intel_output->i2c_bus->slave_addr,
+			.addr = sdvo_priv->slave_addr >> 1,
 			.flags = 0,
 			.len = 2,
 			.buf = out_buf,
@@ -188,7 +188,7 @@
 	out_buf[0] = addr;
 	out_buf[1] = ch;
 
-	if (i2c_transfer(&intel_output->i2c_bus->adapter, msgs, 1) == 1)
+	if (i2c_transfer(intel_output->i2c_bus, msgs, 1) == 1)
 	{
 		return true;
 	}
@@ -1369,9 +1369,8 @@
 	struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv;
 	struct edid *edid = NULL;
 
-	intel_sdvo_set_control_bus_switch(intel_output, sdvo_priv->ddc_bus);
 	edid = drm_get_edid(&intel_output->base,
-			    &intel_output->ddc_bus->adapter);
+			    intel_output->ddc_bus);
 	if (edid != NULL) {
 		sdvo_priv->is_hdmi = drm_detect_hdmi_monitor(edid);
 		kfree(edid);
@@ -1549,7 +1548,6 @@
 static void intel_sdvo_get_lvds_modes(struct drm_connector *connector)
 {
 	struct intel_output *intel_output = to_intel_output(connector);
-	struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv;
 	struct drm_i915_private *dev_priv = connector->dev->dev_private;
 
 	/*
@@ -1557,8 +1555,6 @@
 	 * Assume that the preferred modes are
 	 * arranged in priority order.
 	 */
-	/* set the bus switch and get the modes */
-	intel_sdvo_set_control_bus_switch(intel_output, sdvo_priv->ddc_bus);
 	intel_ddc_get_modes(intel_output);
 	if (list_empty(&connector->probed_modes) == false)
 		return;
@@ -1709,7 +1705,7 @@
 
 	list_for_each_entry(connector,
 			&dev->mode_config.connector_list, head) {
-		if (to_intel_output(connector)->ddc_bus == chan) {
+		if (to_intel_output(connector)->ddc_bus == &chan->adapter) {
 			intel_output = to_intel_output(connector);
 			break;
 		}
@@ -1723,7 +1719,7 @@
 	struct intel_output *intel_output;
 	struct intel_sdvo_priv *sdvo_priv;
 	struct i2c_algo_bit_data *algo_data;
-	struct i2c_algorithm *algo;
+	const struct i2c_algorithm *algo;
 
 	algo_data = (struct i2c_algo_bit_data *)i2c_adap->algo_data;
 	intel_output =
@@ -1733,7 +1729,7 @@
 		return -EINVAL;
 
 	sdvo_priv = intel_output->dev_priv;
-	algo = (struct i2c_algorithm *)intel_output->i2c_bus->adapter.algo;
+	algo = intel_output->i2c_bus->algo;
 
 	intel_sdvo_set_control_bus_switch(intel_output, sdvo_priv->ddc_bus);
 	return algo->master_xfer(i2c_adap, msgs, num);
@@ -1785,13 +1781,11 @@
 	struct drm_connector *connector;
 	struct intel_output *intel_output;
 	struct intel_sdvo_priv *sdvo_priv;
-	struct intel_i2c_chan *i2cbus = NULL;
-	struct intel_i2c_chan *ddcbus = NULL;
+
 	int connector_type;
 	u8 ch[0x40];
 	int i;
-	int encoder_type, output_id;
-	u8 slave_addr;
+	int encoder_type;
 
 	intel_output = kcalloc(sizeof(struct intel_output)+sizeof(struct intel_sdvo_priv), 1, GFP_KERNEL);
 	if (!intel_output) {
@@ -1799,29 +1793,24 @@
 	}
 
 	sdvo_priv = (struct intel_sdvo_priv *)(intel_output + 1);
+	sdvo_priv->output_device = output_device;
+
+	intel_output->dev_priv = sdvo_priv;
 	intel_output->type = INTEL_OUTPUT_SDVO;
 
 	/* setup the DDC bus. */
 	if (output_device == SDVOB)
-		i2cbus = intel_i2c_create(dev, GPIOE, "SDVOCTRL_E for SDVOB");
+		intel_output->i2c_bus = intel_i2c_create(dev, GPIOE, "SDVOCTRL_E for SDVOB");
 	else
-		i2cbus = intel_i2c_create(dev, GPIOE, "SDVOCTRL_E for SDVOC");
+		intel_output->i2c_bus = intel_i2c_create(dev, GPIOE, "SDVOCTRL_E for SDVOC");
 
-	if (!i2cbus)
+	if (!intel_output->i2c_bus)
 		goto err_inteloutput;
 
-	slave_addr = intel_sdvo_get_slave_addr(dev, output_device);
-	sdvo_priv->i2c_bus = i2cbus;
+	sdvo_priv->slave_addr = intel_sdvo_get_slave_addr(dev, output_device);
 
-	if (output_device == SDVOB) {
-		output_id = 1;
-	} else {
-		output_id = 2;
-	}
-	sdvo_priv->i2c_bus->slave_addr = slave_addr >> 1;
-	sdvo_priv->output_device = output_device;
-	intel_output->i2c_bus = i2cbus;
-	intel_output->dev_priv = sdvo_priv;
+	/* Save the bit-banging i2c functionality for use by the DDC wrapper */
+	intel_sdvo_i2c_bit_algo.functionality = intel_output->i2c_bus->algo->functionality;
 
 	/* Read the regs to test if we can talk to the device */
 	for (i = 0; i < 0x40; i++) {
@@ -1835,17 +1824,15 @@
 
 	/* setup the DDC bus. */
 	if (output_device == SDVOB)
-		ddcbus = intel_i2c_create(dev, GPIOE, "SDVOB DDC BUS");
+		intel_output->ddc_bus = intel_i2c_create(dev, GPIOE, "SDVOB DDC BUS");
 	else
-		ddcbus = intel_i2c_create(dev, GPIOE, "SDVOC DDC BUS");
+		intel_output->ddc_bus = intel_i2c_create(dev, GPIOE, "SDVOC DDC BUS");
 
-	if (ddcbus == NULL)
+	if (intel_output->ddc_bus == NULL)
 		goto err_i2c;
 
-	intel_sdvo_i2c_bit_algo.functionality =
-		intel_output->i2c_bus->adapter.algo->functionality;
-	ddcbus->adapter.algo = &intel_sdvo_i2c_bit_algo;
-	intel_output->ddc_bus = ddcbus;
+	/* Wrap with our custom algo which switches to DDC mode */
+	intel_output->ddc_bus->algo = &intel_sdvo_i2c_bit_algo;
 
 	/* In defaut case sdvo lvds is false */
 	sdvo_priv->is_lvds = false;
@@ -1965,9 +1952,10 @@
 	return true;
 
 err_i2c:
-	if (ddcbus != NULL)
+	if (intel_output->ddc_bus != NULL)
 		intel_i2c_destroy(intel_output->ddc_bus);
-	intel_i2c_destroy(intel_output->i2c_bus);
+	if (intel_output->i2c_bus != NULL)
+		intel_i2c_destroy(intel_output->i2c_bus);
 err_inteloutput:
 	kfree(intel_output);
 
diff --git a/drivers/gpu/drm/i915/intel_tv.c b/drivers/gpu/drm/i915/intel_tv.c
index ea68992..a43c98e 100644
--- a/drivers/gpu/drm/i915/intel_tv.c
+++ b/drivers/gpu/drm/i915/intel_tv.c
@@ -1383,34 +1383,31 @@
 	/*
 	 * Detect TV by polling)
 	 */
-	if (intel_output->load_detect_temp) {
-		/* TV not currently running, prod it with destructive detect */
-		save_tv_dac = tv_dac;
-		tv_ctl = I915_READ(TV_CTL);
-		save_tv_ctl = tv_ctl;
-		tv_ctl &= ~TV_ENC_ENABLE;
-		tv_ctl &= ~TV_TEST_MODE_MASK;
-		tv_ctl |= TV_TEST_MODE_MONITOR_DETECT;
-		tv_dac &= ~TVDAC_SENSE_MASK;
-		tv_dac &= ~DAC_A_MASK;
-		tv_dac &= ~DAC_B_MASK;
-		tv_dac &= ~DAC_C_MASK;
-		tv_dac |= (TVDAC_STATE_CHG_EN |
-			   TVDAC_A_SENSE_CTL |
-			   TVDAC_B_SENSE_CTL |
-			   TVDAC_C_SENSE_CTL |
-			   DAC_CTL_OVERRIDE |
-			   DAC_A_0_7_V |
-			   DAC_B_0_7_V |
-			   DAC_C_0_7_V);
-		I915_WRITE(TV_CTL, tv_ctl);
-		I915_WRITE(TV_DAC, tv_dac);
-		intel_wait_for_vblank(dev);
-		tv_dac = I915_READ(TV_DAC);
-		I915_WRITE(TV_DAC, save_tv_dac);
-		I915_WRITE(TV_CTL, save_tv_ctl);
-		intel_wait_for_vblank(dev);
-	}
+	save_tv_dac = tv_dac;
+	tv_ctl = I915_READ(TV_CTL);
+	save_tv_ctl = tv_ctl;
+	tv_ctl &= ~TV_ENC_ENABLE;
+	tv_ctl &= ~TV_TEST_MODE_MASK;
+	tv_ctl |= TV_TEST_MODE_MONITOR_DETECT;
+	tv_dac &= ~TVDAC_SENSE_MASK;
+	tv_dac &= ~DAC_A_MASK;
+	tv_dac &= ~DAC_B_MASK;
+	tv_dac &= ~DAC_C_MASK;
+	tv_dac |= (TVDAC_STATE_CHG_EN |
+		   TVDAC_A_SENSE_CTL |
+		   TVDAC_B_SENSE_CTL |
+		   TVDAC_C_SENSE_CTL |
+		   DAC_CTL_OVERRIDE |
+		   DAC_A_0_7_V |
+		   DAC_B_0_7_V |
+		   DAC_C_0_7_V);
+	I915_WRITE(TV_CTL, tv_ctl);
+	I915_WRITE(TV_DAC, tv_dac);
+	intel_wait_for_vblank(dev);
+	tv_dac = I915_READ(TV_DAC);
+	I915_WRITE(TV_DAC, save_tv_dac);
+	I915_WRITE(TV_CTL, save_tv_ctl);
+	intel_wait_for_vblank(dev);
 	/*
 	 *  A B C
 	 *  0 1 1 Composite
diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c
index f30aa72..f97563d 100644
--- a/drivers/gpu/drm/radeon/radeon_device.c
+++ b/drivers/gpu/drm/radeon/radeon_device.c
@@ -35,6 +35,23 @@
 #include "atom.h"
 
 /*
+ * Clear GPU surface registers.
+ */
+static void radeon_surface_init(struct radeon_device *rdev)
+{
+	/* FIXME: check this out */
+	if (rdev->family < CHIP_R600) {
+		int i;
+
+		for (i = 0; i < 8; i++) {
+			WREG32(RADEON_SURFACE0_INFO +
+			       i * (RADEON_SURFACE1_INFO - RADEON_SURFACE0_INFO),
+			       0);
+		}
+	}
+}
+
+/*
  * GPU scratch registers helpers function.
  */
 static void radeon_scratch_init(struct radeon_device *rdev)
@@ -496,6 +513,8 @@
 	radeon_errata(rdev);
 	/* Initialize scratch registers */
 	radeon_scratch_init(rdev);
+	/* Initialize surface registers */
+	radeon_surface_init(rdev);
 
 	/* TODO: disable VGA need to use VGA request */
 	/* BIOS*/
@@ -604,9 +623,6 @@
 	if (r) {
 		return r;
 	}
-	if (rdev->fbdev_rfb && rdev->fbdev_rfb->obj) {
-		rdev->fbdev_robj = rdev->fbdev_rfb->obj->driver_private;
-	}
 	if (!ret) {
 		DRM_INFO("radeon: kernel modesetting successfully initialized.\n");
 	}
diff --git a/drivers/gpu/drm/radeon/radeon_drv.c b/drivers/gpu/drm/radeon/radeon_drv.c
index 09c9fb9..84ba69f 100644
--- a/drivers/gpu/drm/radeon/radeon_drv.c
+++ b/drivers/gpu/drm/radeon/radeon_drv.c
@@ -345,7 +345,7 @@
 	drm_exit(driver);
 }
 
-late_initcall(radeon_init);
+module_init(radeon_init);
 module_exit(radeon_exit);
 
 MODULE_AUTHOR(DRIVER_AUTHOR);
diff --git a/drivers/gpu/drm/radeon/radeon_fb.c b/drivers/gpu/drm/radeon/radeon_fb.c
index fa86d39..9e8f191 100644
--- a/drivers/gpu/drm/radeon/radeon_fb.c
+++ b/drivers/gpu/drm/radeon/radeon_fb.c
@@ -478,14 +478,16 @@
 {
 	struct fb_info *info;
 	struct radeon_fb_device *rfbdev;
-	struct drm_framebuffer *fb;
+	struct drm_framebuffer *fb = NULL;
 	struct radeon_framebuffer *rfb;
 	struct drm_mode_fb_cmd mode_cmd;
 	struct drm_gem_object *gobj = NULL;
 	struct radeon_object *robj = NULL;
 	struct device *device = &rdev->pdev->dev;
 	int size, aligned_size, ret;
+	u64 fb_gpuaddr;
 	void *fbptr = NULL;
+	unsigned long tmp;
 
 	mode_cmd.width = surface_width;
 	mode_cmd.height = surface_height;
@@ -498,11 +500,12 @@
 	aligned_size = ALIGN(size, PAGE_SIZE);
 
 	ret = radeon_gem_object_create(rdev, aligned_size, 0,
-				       RADEON_GEM_DOMAIN_VRAM,
-				       false, ttm_bo_type_kernel,
-				       false, &gobj);
+			RADEON_GEM_DOMAIN_VRAM,
+			false, ttm_bo_type_kernel,
+			false, &gobj);
 	if (ret) {
-		printk(KERN_ERR "failed to allocate framebuffer\n");
+		printk(KERN_ERR "failed to allocate framebuffer (%d %d)\n",
+		       surface_width, surface_height);
 		ret = -ENOMEM;
 		goto out;
 	}
@@ -515,12 +518,19 @@
 		ret = -ENOMEM;
 		goto out_unref;
 	}
+	ret = radeon_object_pin(robj, RADEON_GEM_DOMAIN_VRAM, &fb_gpuaddr);
+	if (ret) {
+		printk(KERN_ERR "failed to pin framebuffer\n");
+		ret = -ENOMEM;
+		goto out_unref;
+	}
 
 	list_add(&fb->filp_head, &rdev->ddev->mode_config.fb_kernel_list);
 
 	rfb = to_radeon_framebuffer(fb);
 	*rfb_p = rfb;
 	rdev->fbdev_rfb = rfb;
+	rdev->fbdev_robj = robj;
 
 	info = framebuffer_alloc(sizeof(struct radeon_fb_device), device);
 	if (info == NULL) {
@@ -541,13 +551,13 @@
 	info->fix.xpanstep = 1; /* doing it in hw */
 	info->fix.ypanstep = 1; /* doing it in hw */
 	info->fix.ywrapstep = 0;
-	info->fix.accel = FB_ACCEL_I830;
+	info->fix.accel = FB_ACCEL_NONE;
 	info->fix.type_aux = 0;
 	info->flags = FBINFO_DEFAULT;
 	info->fbops = &radeonfb_ops;
 	info->fix.line_length = fb->pitch;
-	info->screen_base = fbptr;
-	info->fix.smem_start = (unsigned long)fbptr;
+	tmp = fb_gpuaddr - rdev->mc.vram_location;
+	info->fix.smem_start = rdev->mc.aper_base + tmp;
 	info->fix.smem_len = size;
 	info->screen_base = fbptr;
 	info->screen_size = size;
@@ -562,8 +572,8 @@
 	info->var.width = -1;
 	info->var.xres = fb_width;
 	info->var.yres = fb_height;
-	info->fix.mmio_start = pci_resource_start(rdev->pdev, 2);
-	info->fix.mmio_len = pci_resource_len(rdev->pdev, 2);
+	info->fix.mmio_start = 0;
+	info->fix.mmio_len = 0;
 	info->pixmap.size = 64*1024;
 	info->pixmap.buf_align = 8;
 	info->pixmap.access_align = 32;
@@ -644,7 +654,7 @@
 	if (robj) {
 		radeon_object_kunmap(robj);
 	}
-	if (ret) {
+	if (fb && ret) {
 		list_del(&fb->filp_head);
 		drm_gem_object_unreference(gobj);
 		drm_framebuffer_cleanup(fb);
@@ -813,6 +823,7 @@
 		robj = rfb->obj->driver_private;
 		unregister_framebuffer(info);
 		radeon_object_kunmap(robj);
+		radeon_object_unpin(robj);
 		framebuffer_release(info);
 	}
 
diff --git a/drivers/gpu/drm/radeon/radeon_object.c b/drivers/gpu/drm/radeon/radeon_object.c
index 983e8df..bac0d06 100644
--- a/drivers/gpu/drm/radeon/radeon_object.c
+++ b/drivers/gpu/drm/radeon/radeon_object.c
@@ -223,7 +223,6 @@
 {
 	uint32_t flags;
 	uint32_t tmp;
-	void *fbptr;
 	int r;
 
 	flags = radeon_object_flags_from_domain(domain);
@@ -242,10 +241,6 @@
 		DRM_ERROR("radeon: failed to reserve object for pinning it.\n");
 		return r;
 	}
-	if (robj->rdev->fbdev_robj == robj) {
-		mutex_lock(&robj->rdev->fbdev_info->lock);
-		radeon_object_kunmap(robj);
-	}
 	tmp = robj->tobj.mem.placement;
 	ttm_flag_masked(&tmp, flags, TTM_PL_MASK_MEM);
 	robj->tobj.proposed_placement = tmp | TTM_PL_FLAG_NO_EVICT | TTM_PL_MASK_CACHING;
@@ -261,23 +256,12 @@
 		DRM_ERROR("radeon: failed to pin object.\n");
 	}
 	radeon_object_unreserve(robj);
-	if (robj->rdev->fbdev_robj == robj) {
-		if (!r) {
-			r = radeon_object_kmap(robj, &fbptr);
-		}
-		if (!r) {
-			robj->rdev->fbdev_info->screen_base = fbptr;
-			robj->rdev->fbdev_info->fix.smem_start = (unsigned long)fbptr;
-		}
-		mutex_unlock(&robj->rdev->fbdev_info->lock);
-	}
 	return r;
 }
 
 void radeon_object_unpin(struct radeon_object *robj)
 {
 	uint32_t flags;
-	void *fbptr;
 	int r;
 
 	spin_lock(&robj->tobj.lock);
@@ -297,10 +281,6 @@
 		DRM_ERROR("radeon: failed to reserve object for unpinning it.\n");
 		return;
 	}
-	if (robj->rdev->fbdev_robj == robj) {
-		mutex_lock(&robj->rdev->fbdev_info->lock);
-		radeon_object_kunmap(robj);
-	}
 	flags = robj->tobj.mem.placement;
 	robj->tobj.proposed_placement = flags & ~TTM_PL_FLAG_NO_EVICT;
 	r = ttm_buffer_object_validate(&robj->tobj,
@@ -310,16 +290,6 @@
 		DRM_ERROR("radeon: failed to unpin buffer.\n");
 	}
 	radeon_object_unreserve(robj);
-	if (robj->rdev->fbdev_robj == robj) {
-		if (!r) {
-			r = radeon_object_kmap(robj, &fbptr);
-		}
-		if (!r) {
-			robj->rdev->fbdev_info->screen_base = fbptr;
-			robj->rdev->fbdev_info->fix.smem_start = (unsigned long)fbptr;
-		}
-		mutex_unlock(&robj->rdev->fbdev_info->lock);
-	}
 }
 
 int radeon_object_wait(struct radeon_object *robj)
diff --git a/drivers/gpu/drm/ttm/ttm_bo_util.c b/drivers/gpu/drm/ttm/ttm_bo_util.c
index 517c845..bdec583 100644
--- a/drivers/gpu/drm/ttm/ttm_bo_util.c
+++ b/drivers/gpu/drm/ttm/ttm_bo_util.c
@@ -34,7 +34,6 @@
 #include <linux/highmem.h>
 #include <linux/wait.h>
 #include <linux/vmalloc.h>
-#include <linux/version.h>
 #include <linux/module.h>
 
 void ttm_bo_free_old_node(struct ttm_buffer_object *bo)
diff --git a/drivers/gpu/drm/ttm/ttm_bo_vm.c b/drivers/gpu/drm/ttm/ttm_bo_vm.c
index 27b146c..40b7503 100644
--- a/drivers/gpu/drm/ttm/ttm_bo_vm.c
+++ b/drivers/gpu/drm/ttm/ttm_bo_vm.c
@@ -32,7 +32,6 @@
 #include <ttm/ttm_bo_driver.h>
 #include <ttm/ttm_placement.h>
 #include <linux/mm.h>
-#include <linux/version.h>
 #include <linux/rbtree.h>
 #include <linux/module.h>
 #include <linux/uaccess.h>
diff --git a/drivers/gpu/drm/ttm/ttm_tt.c b/drivers/gpu/drm/ttm/ttm_tt.c
index 0331fa7..75dc8bd 100644
--- a/drivers/gpu/drm/ttm/ttm_tt.c
+++ b/drivers/gpu/drm/ttm/ttm_tt.c
@@ -28,7 +28,6 @@
  * Authors: Thomas Hellstrom <thellstrom-at-vmware-dot-com>
  */
 
-#include <linux/version.h>
 #include <linux/vmalloc.h>
 #include <linux/sched.h>
 #include <linux/highmem.h>
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index aa87b6a..8206442 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -328,6 +328,7 @@
 
 config I2C_DESIGNWARE
 	tristate "Synopsys DesignWare"
+	depends on HAVE_CLK
 	help
 	  If you say yes to this option, support will be included for the
 	  Synopsys DesignWare I2C adapter. Only master mode is supported.
diff --git a/drivers/ide/cs5520.c b/drivers/ide/cs5520.c
index bd066bb..09f98ed 100644
--- a/drivers/ide/cs5520.c
+++ b/drivers/ide/cs5520.c
@@ -135,6 +135,7 @@
 
 	ide_pci_setup_ports(dev, d, &hw[0], &hws[0]);
 	hw[0].irq = 14;
+	hw[1].irq = 15;
 
 	return ide_host_add(d, hws, 2, NULL);
 }
diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
index 4a19686..f0ede59 100644
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -876,9 +876,12 @@
 		return stat;
 
 	/*
-	 * Sanity check the given block size
+	 * Sanity check the given block size, in so far as making
+	 * sure the sectors_per_frame we give to the caller won't
+	 * end up being bogus.
 	 */
 	blocklen = be32_to_cpu(capbuf.blocklen);
+	blocklen = (blocklen >> SECTOR_BITS) << SECTOR_BITS;
 	switch (blocklen) {
 	case 512:
 	case 1024:
@@ -886,10 +889,9 @@
 	case 4096:
 		break;
 	default:
-		printk(KERN_ERR PFX "%s: weird block size %u\n",
+		printk_once(KERN_ERR PFX "%s: weird block size %u; "
+				"setting default block size to 2048\n",
 				drive->name, blocklen);
-		printk(KERN_ERR PFX "%s: default to 2kb block size\n",
-				drive->name);
 		blocklen = 2048;
 		break;
 	}
diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c
index 219e6fb..ee58c88 100644
--- a/drivers/ide/ide-dma.c
+++ b/drivers/ide/ide-dma.c
@@ -361,9 +361,6 @@
 	if (__ide_dma_bad_drive(drive))
 		return 0;
 
-	if (ide_id_dma_bug(drive))
-		return 0;
-
 	if (hwif->host_flags & IDE_HFLAG_TRUST_BIOS_FOR_DMA)
 		return config_drive_for_dma(drive);
 
@@ -394,24 +391,6 @@
 	return -1;
 }
 
-int ide_id_dma_bug(ide_drive_t *drive)
-{
-	u16 *id = drive->id;
-
-	if (id[ATA_ID_FIELD_VALID] & 4) {
-		if ((id[ATA_ID_UDMA_MODES] >> 8) &&
-		    (id[ATA_ID_MWDMA_MODES] >> 8))
-			goto err_out;
-	} else if ((id[ATA_ID_MWDMA_MODES] >> 8) &&
-		   (id[ATA_ID_SWDMA_MODES] >> 8))
-		goto err_out;
-
-	return 0;
-err_out:
-	printk(KERN_ERR "%s: bad DMA info in identify block\n", drive->name);
-	return 1;
-}
-
 int ide_set_dma(ide_drive_t *drive)
 {
 	int rc;
diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c
index 1059f80..93b7886 100644
--- a/drivers/ide/ide-io.c
+++ b/drivers/ide/ide-io.c
@@ -476,10 +476,14 @@
 
 	if (!ide_lock_port(hwif)) {
 		ide_hwif_t *prev_port;
-
-		WARN_ON_ONCE(hwif->rq);
 repeat:
 		prev_port = hwif->host->cur_port;
+
+		if (drive->dev_flags & IDE_DFLAG_BLOCKED)
+			rq = hwif->rq;
+		else
+			WARN_ON_ONCE(hwif->rq);
+
 		if (drive->dev_flags & IDE_DFLAG_SLEEPING &&
 		    time_after(drive->sleep, jiffies)) {
 			ide_unlock_port(hwif);
@@ -506,43 +510,29 @@
 		hwif->cur_dev = drive;
 		drive->dev_flags &= ~(IDE_DFLAG_SLEEPING | IDE_DFLAG_PARKED);
 
-		spin_unlock_irq(&hwif->lock);
-		spin_lock_irq(q->queue_lock);
-		/*
-		 * we know that the queue isn't empty, but this can happen
-		 * if the q->prep_rq_fn() decides to kill a request
-		 */
-		if (!rq)
+		if (rq == NULL) {
+			spin_unlock_irq(&hwif->lock);
+			spin_lock_irq(q->queue_lock);
+			/*
+			 * we know that the queue isn't empty, but this can
+			 * happen if ->prep_rq_fn() decides to kill a request
+			 */
 			rq = blk_fetch_request(drive->queue);
+			spin_unlock_irq(q->queue_lock);
+			spin_lock_irq(&hwif->lock);
 
-		spin_unlock_irq(q->queue_lock);
-		spin_lock_irq(&hwif->lock);
-
-		if (!rq) {
-			ide_unlock_port(hwif);
-			goto out;
+			if (rq == NULL) {
+				ide_unlock_port(hwif);
+				goto out;
+			}
 		}
 
 		/*
 		 * Sanity: don't accept a request that isn't a PM request
-		 * if we are currently power managed. This is very important as
-		 * blk_stop_queue() doesn't prevent the blk_fetch_request()
-		 * above to return us whatever is in the queue. Since we call
-		 * ide_do_request() ourselves, we end up taking requests while
-		 * the queue is blocked...
-		 * 
-		 * We let requests forced at head of queue with ide-preempt
-		 * though. I hope that doesn't happen too much, hopefully not
-		 * unless the subdriver triggers such a thing in its own PM
-		 * state machine.
+		 * if we are currently power managed.
 		 */
-		if ((drive->dev_flags & IDE_DFLAG_BLOCKED) &&
-		    blk_pm_request(rq) == 0 &&
-		    (rq->cmd_flags & REQ_PREEMPT) == 0) {
-			/* there should be no pending command at this point */
-			ide_unlock_port(hwif);
-			goto plug_device;
-		}
+		BUG_ON((drive->dev_flags & IDE_DFLAG_BLOCKED) &&
+		       blk_pm_request(rq) == 0);
 
 		hwif->rq = rq;
 
diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c
index fa04715..2892b24 100644
--- a/drivers/ide/ide-iops.c
+++ b/drivers/ide/ide-iops.c
@@ -210,6 +210,7 @@
  */
 static const struct drive_list_entry ivb_list[] = {
 	{ "QUANTUM FIREBALLlct10 05"	, "A03.0900"	},
+	{ "QUANTUM FIREBALLlct20 30"	, "APL.0900"	},
 	{ "TSSTcorp CDDVDW SH-S202J"	, "SB00"	},
 	{ "TSSTcorp CDDVDW SH-S202J"	, "SB01"	},
 	{ "TSSTcorp CDDVDW SH-S202N"	, "SB00"	},
@@ -329,9 +330,6 @@
 
 	kfree(id);
 
-	if ((drive->dev_flags & IDE_DFLAG_USING_DMA) && ide_id_dma_bug(drive))
-		ide_dma_off(drive);
-
 	return 1;
 out_err:
 	if (rc == 2)
diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index 51af4ee..1bb106f 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -818,6 +818,24 @@
 	return j;
 }
 
+static void ide_host_enable_irqs(struct ide_host *host)
+{
+	ide_hwif_t *hwif;
+	int i;
+
+	ide_host_for_each_port(i, hwif, host) {
+		if (hwif == NULL)
+			continue;
+
+		/* clear any pending IRQs */
+		hwif->tp_ops->read_status(hwif);
+
+		/* unmask IRQs */
+		if (hwif->io_ports.ctl_addr)
+			hwif->tp_ops->write_devctl(hwif, ATA_DEVCTL_OBS);
+	}
+}
+
 /*
  * This routine sets up the IRQ for an IDE interface.
  */
@@ -831,9 +849,6 @@
 	if (irq_handler == NULL)
 		irq_handler = ide_intr;
 
-	if (io_ports->ctl_addr)
-		hwif->tp_ops->write_devctl(hwif, ATA_DEVCTL_OBS);
-
 	if (request_irq(hwif->irq, irq_handler, sa, hwif->name, hwif))
 		goto out_up;
 
@@ -1404,6 +1419,8 @@
 			ide_port_tune_devices(hwif);
 	}
 
+	ide_host_enable_irqs(host);
+
 	ide_host_for_each_port(i, hwif, host) {
 		if (hwif == NULL)
 			continue;
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 38bfdb0..3f10459 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -550,7 +550,7 @@
 static int acm_tty_open(struct tty_struct *tty, struct file *filp)
 {
 	struct acm *acm;
-	int rv = -EINVAL;
+	int rv = -ENODEV;
 	int i;
 	dbg("Entering acm_tty_open.");
 
@@ -677,7 +677,7 @@
 
 	/* Perform the closing process and see if we need to do the hardware
 	   shutdown */
-	if (tty_port_close_start(&acm->port, tty, filp) == 0)
+	if (!acm || tty_port_close_start(&acm->port, tty, filp) == 0)
 		return;
 	acm_port_down(acm, 0);
 	tty_port_close_end(&acm->port, tty);
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index d595aa5..a842164 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -333,6 +333,9 @@
 {
 	struct usb_serial_port *port = tty->driver_data;
 
+	if (!port)
+		return;
+
 	dbg("%s - port %d", __func__, port->number);
 
 
diff --git a/include/drm/drm_edid.h b/include/drm/drm_edid.h
index c263e4d..7d6c9a2 100644
--- a/include/drm/drm_edid.h
+++ b/include/drm/drm_edid.h
@@ -35,11 +35,11 @@
 } __attribute__((packed));
 
 /* 00=16:10, 01=4:3, 10=5:4, 11=16:9 */
-#define EDID_TIMING_ASPECT_SHIFT 0
+#define EDID_TIMING_ASPECT_SHIFT 6
 #define EDID_TIMING_ASPECT_MASK  (0x3 << EDID_TIMING_ASPECT_SHIFT)
 
 /* need to add 60 */
-#define EDID_TIMING_VFREQ_SHIFT  2
+#define EDID_TIMING_VFREQ_SHIFT  0
 #define EDID_TIMING_VFREQ_MASK   (0x3f << EDID_TIMING_VFREQ_SHIFT)
 
 struct std_timing {
@@ -47,11 +47,11 @@
 	u8 vfreq_aspect;
 } __attribute__((packed));
 
-#define DRM_EDID_PT_HSYNC_POSITIVE (1 << 6)
-#define DRM_EDID_PT_VSYNC_POSITIVE (1 << 5)
+#define DRM_EDID_PT_HSYNC_POSITIVE (1 << 1)
+#define DRM_EDID_PT_VSYNC_POSITIVE (1 << 2)
 #define DRM_EDID_PT_SEPARATE_SYNC  (3 << 3)
-#define DRM_EDID_PT_STEREO         (1 << 2)
-#define DRM_EDID_PT_INTERLACED     (1 << 1)
+#define DRM_EDID_PT_STEREO         (1 << 5)
+#define DRM_EDID_PT_INTERLACED     (1 << 7)
 
 /* If detailed data is pixel timing */
 struct detailed_pixel_timing {
@@ -93,7 +93,7 @@
 } __attribute__((packed));
 
 struct detailed_data_wpindex {
-	u8 white_xy_lo; /* Upper 2 bits each */
+	u8 white_yx_lo; /* Lower 2 bits each */
 	u8 white_x_hi;
 	u8 white_y_hi;
 	u8 gamma; /* need to divide by 100 then add 1 */
@@ -135,21 +135,21 @@
 	} data;
 } __attribute__((packed));
 
-#define DRM_EDID_INPUT_SERRATION_VSYNC (1 << 7)
-#define DRM_EDID_INPUT_SYNC_ON_GREEN   (1 << 5)
-#define DRM_EDID_INPUT_COMPOSITE_SYNC  (1 << 4)
+#define DRM_EDID_INPUT_SERRATION_VSYNC (1 << 0)
+#define DRM_EDID_INPUT_SYNC_ON_GREEN   (1 << 1)
+#define DRM_EDID_INPUT_COMPOSITE_SYNC  (1 << 2)
 #define DRM_EDID_INPUT_SEPARATE_SYNCS  (1 << 3)
-#define DRM_EDID_INPUT_BLANK_TO_BLACK  (1 << 2)
-#define DRM_EDID_INPUT_VIDEO_LEVEL     (3 << 1)
-#define DRM_EDID_INPUT_DIGITAL         (1 << 0) /* bits above must be zero if set */
+#define DRM_EDID_INPUT_BLANK_TO_BLACK  (1 << 4)
+#define DRM_EDID_INPUT_VIDEO_LEVEL     (3 << 5)
+#define DRM_EDID_INPUT_DIGITAL         (1 << 7) /* bits below must be zero if set */
 
-#define DRM_EDID_FEATURE_DEFAULT_GTF      (1 << 7)
-#define DRM_EDID_FEATURE_PREFERRED_TIMING (1 << 6)
-#define DRM_EDID_FEATURE_STANDARD_COLOR   (1 << 5)
+#define DRM_EDID_FEATURE_DEFAULT_GTF      (1 << 0)
+#define DRM_EDID_FEATURE_PREFERRED_TIMING (1 << 1)
+#define DRM_EDID_FEATURE_STANDARD_COLOR   (1 << 2)
 #define DRM_EDID_FEATURE_DISPLAY_TYPE     (3 << 3) /* 00=mono, 01=rgb, 10=non-rgb, 11=unknown */
-#define DRM_EDID_FEATURE_PM_ACTIVE_OFF    (1 << 2)
-#define DRM_EDID_FEATURE_PM_SUSPEND       (1 << 1)
-#define DRM_EDID_FEATURE_PM_STANDBY       (1 << 0)
+#define DRM_EDID_FEATURE_PM_ACTIVE_OFF    (1 << 5)
+#define DRM_EDID_FEATURE_PM_SUSPEND       (1 << 6)
+#define DRM_EDID_FEATURE_PM_STANDBY       (1 << 7)
 
 struct edid {
 	u8 header[8];
diff --git a/include/linux/ide.h b/include/linux/ide.h
index 95c6e00..cf1f388 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -1361,7 +1361,6 @@
 #ifdef CONFIG_BLK_DEV_IDEDMA
 int ide_dma_good_drive(ide_drive_t *);
 int __ide_dma_bad_drive(ide_drive_t *);
-int ide_id_dma_bug(ide_drive_t *);
 
 u8 ide_find_dma_mode(ide_drive_t *, u8);
 
@@ -1402,7 +1401,6 @@
 ide_startstop_t ide_dma_timeout_retry(ide_drive_t *, int);
 
 #else
-static inline int ide_id_dma_bug(ide_drive_t *drive) { return 0; }
 static inline u8 ide_find_dma_mode(ide_drive_t *drive, u8 speed) { return 0; }
 static inline u8 ide_max_dma_mode(ide_drive_t *drive) { return 0; }
 static inline void ide_dma_off_quietly(ide_drive_t *drive) { ; }
diff --git a/include/linux/mm.h b/include/linux/mm.h
index d006e93..ba3a7cb 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -826,7 +826,7 @@
 extern int access_process_vm(struct task_struct *tsk, unsigned long addr, void *buf, int len, int write);
 
 int get_user_pages(struct task_struct *tsk, struct mm_struct *mm,
-			unsigned long start, int len, int write, int force,
+			unsigned long start, int nr_pages, int write, int force,
 			struct page **pages, struct vm_area_struct **vmas);
 int get_user_pages_fast(unsigned long start, int nr_pages, int write,
 			struct page **pages);
diff --git a/kernel/futex.c b/kernel/futex.c
index 1c33711..794c862 100644
--- a/kernel/futex.c
+++ b/kernel/futex.c
@@ -299,7 +299,7 @@
 static int fault_in_user_writeable(u32 __user *uaddr)
 {
 	int ret = get_user_pages(current, current->mm, (unsigned long)uaddr,
-				 sizeof(*uaddr), 1, 0, NULL, NULL);
+				 1, 1, 0, NULL, NULL);
 	return ret < 0 ? ret : 0;
 }
 
diff --git a/mm/memory.c b/mm/memory.c
index f46ac18..6521619 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -1207,8 +1207,8 @@
 
 
 int __get_user_pages(struct task_struct *tsk, struct mm_struct *mm,
-		     unsigned long start, int len, int flags,
-		struct page **pages, struct vm_area_struct **vmas)
+		     unsigned long start, int nr_pages, int flags,
+		     struct page **pages, struct vm_area_struct **vmas)
 {
 	int i;
 	unsigned int vm_flags = 0;
@@ -1217,7 +1217,7 @@
 	int ignore = !!(flags & GUP_FLAGS_IGNORE_VMA_PERMISSIONS);
 	int ignore_sigkill = !!(flags & GUP_FLAGS_IGNORE_SIGKILL);
 
-	if (len <= 0)
+	if (nr_pages <= 0)
 		return 0;
 	/* 
 	 * Require read or write permissions.
@@ -1269,7 +1269,7 @@
 				vmas[i] = gate_vma;
 			i++;
 			start += PAGE_SIZE;
-			len--;
+			nr_pages--;
 			continue;
 		}
 
@@ -1280,7 +1280,7 @@
 
 		if (is_vm_hugetlb_page(vma)) {
 			i = follow_hugetlb_page(mm, vma, pages, vmas,
-						&start, &len, i, write);
+						&start, &nr_pages, i, write);
 			continue;
 		}
 
@@ -1357,9 +1357,9 @@
 				vmas[i] = vma;
 			i++;
 			start += PAGE_SIZE;
-			len--;
-		} while (len && start < vma->vm_end);
-	} while (len);
+			nr_pages--;
+		} while (nr_pages && start < vma->vm_end);
+	} while (nr_pages);
 	return i;
 }
 
@@ -1368,7 +1368,7 @@
  * @tsk:	task_struct of target task
  * @mm:		mm_struct of target mm
  * @start:	starting user address
- * @len:	number of pages from start to pin
+ * @nr_pages:	number of pages from start to pin
  * @write:	whether pages will be written to by the caller
  * @force:	whether to force write access even if user mapping is
  *		readonly. This will result in the page being COWed even
@@ -1380,7 +1380,7 @@
  *		Or NULL if the caller does not require them.
  *
  * Returns number of pages pinned. This may be fewer than the number
- * requested. If len is 0 or negative, returns 0. If no pages
+ * requested. If nr_pages is 0 or negative, returns 0. If no pages
  * were pinned, returns -errno. Each page returned must be released
  * with a put_page() call when it is finished with. vmas will only
  * remain valid while mmap_sem is held.
@@ -1414,7 +1414,7 @@
  * See also get_user_pages_fast, for performance critical applications.
  */
 int get_user_pages(struct task_struct *tsk, struct mm_struct *mm,
-		unsigned long start, int len, int write, int force,
+		unsigned long start, int nr_pages, int write, int force,
 		struct page **pages, struct vm_area_struct **vmas)
 {
 	int flags = 0;
@@ -1424,9 +1424,7 @@
 	if (force)
 		flags |= GUP_FLAGS_FORCE;
 
-	return __get_user_pages(tsk, mm,
-				start, len, flags,
-				pages, vmas);
+	return __get_user_pages(tsk, mm, start, nr_pages, flags, pages, vmas);
 }
 
 EXPORT_SYMBOL(get_user_pages);
diff --git a/mm/nommu.c b/mm/nommu.c
index 2fd2ad5..bf0cc76 100644
--- a/mm/nommu.c
+++ b/mm/nommu.c
@@ -173,8 +173,8 @@
 }
 
 int __get_user_pages(struct task_struct *tsk, struct mm_struct *mm,
-		     unsigned long start, int len, int flags,
-		struct page **pages, struct vm_area_struct **vmas)
+		     unsigned long start, int nr_pages, int flags,
+		     struct page **pages, struct vm_area_struct **vmas)
 {
 	struct vm_area_struct *vma;
 	unsigned long vm_flags;
@@ -189,7 +189,7 @@
 	vm_flags  = write ? (VM_WRITE | VM_MAYWRITE) : (VM_READ | VM_MAYREAD);
 	vm_flags &= force ? (VM_MAYREAD | VM_MAYWRITE) : (VM_READ | VM_WRITE);
 
-	for (i = 0; i < len; i++) {
+	for (i = 0; i < nr_pages; i++) {
 		vma = find_vma(mm, start);
 		if (!vma)
 			goto finish_or_fault;
@@ -224,7 +224,7 @@
  * - don't permit access to VMAs that don't support it, such as I/O mappings
  */
 int get_user_pages(struct task_struct *tsk, struct mm_struct *mm,
-	unsigned long start, int len, int write, int force,
+	unsigned long start, int nr_pages, int write, int force,
 	struct page **pages, struct vm_area_struct **vmas)
 {
 	int flags = 0;
@@ -234,9 +234,7 @@
 	if (force)
 		flags |= GUP_FLAGS_FORCE;
 
-	return __get_user_pages(tsk, mm,
-				start, len, flags,
-				pages, vmas);
+	return __get_user_pages(tsk, mm, start, nr_pages, flags, pages, vmas);
 }
 EXPORT_SYMBOL(get_user_pages);