pdc202xx_old: use ide_dma_test_irq()
The driver's dma_test_irq() method, although tests some chip specific interrupt
bits, finally always relies on the SFF-8038i standard interrupt bit. I see no
point in testing the bits that are not trusted anyway -- the driver should be
fully able to use the standard method implemetation, ide_dma_test_irq().
With this change 'pdc202xx_dma_ops' finally becomes identical to 'sff_dma_ops',
and we can get rid of it...
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
diff --git a/drivers/ide/pdc202xx_old.c b/drivers/ide/pdc202xx_old.c
index b3bc96f..668f452 100644
--- a/drivers/ide/pdc202xx_old.c
+++ b/drivers/ide/pdc202xx_old.c
@@ -203,30 +203,6 @@
return ide_dma_end(drive);
}
-static int pdc202xx_dma_test_irq(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- unsigned long high_16 = hwif->extra_base - 16;
- u8 dma_stat = inb(hwif->dma_base + ATA_DMA_STATUS);
- u8 sc1d = inb(high_16 + 0x001d);
-
- if (hwif->channel) {
- /* bit7: Error, bit6: Interrupting, bit5: FIFO Full, bit4: FIFO Empty */
- if ((sc1d & 0x50) == 0x50)
- goto somebody_else;
- else if ((sc1d & 0x40) == 0x40)
- return (dma_stat & 4) == 4;
- } else {
- /* bit3: Error, bit2: Interrupting, bit1: FIFO Full, bit0: FIFO Empty */
- if ((sc1d & 0x05) == 0x05)
- goto somebody_else;
- else if ((sc1d & 0x04) == 0x04)
- return (dma_stat & 4) == 4;
- }
-somebody_else:
- return (dma_stat & 4) == 4; /* return 1 if INTR asserted */
-}
-
static void pdc202xx_reset(ide_drive_t *drive)
{
ide_hwif_t *hwif = drive->hwif;
@@ -313,23 +289,12 @@
.cable_detect = pdc2026x_cable_detect,
};
-static const struct ide_dma_ops pdc20246_dma_ops = {
- .dma_host_set = ide_dma_host_set,
- .dma_setup = ide_dma_setup,
- .dma_start = ide_dma_start,
- .dma_end = ide_dma_end,
- .dma_test_irq = pdc202xx_dma_test_irq,
- .dma_lost_irq = ide_dma_lost_irq,
- .dma_timer_expiry = ide_dma_sff_timer_expiry,
- .dma_sff_read_status = ide_dma_sff_read_status,
-};
-
static const struct ide_dma_ops pdc2026x_dma_ops = {
.dma_host_set = ide_dma_host_set,
.dma_setup = ide_dma_setup,
.dma_start = pdc202xx_dma_start,
.dma_end = pdc202xx_dma_end,
- .dma_test_irq = pdc202xx_dma_test_irq,
+ .dma_test_irq = ide_dma_test_irq,
.dma_lost_irq = pdc202xx_dma_lost_irq,
.dma_timer_expiry = ide_dma_sff_timer_expiry,
.dma_clear = pdc202xx_reset,
@@ -354,7 +319,7 @@
.name = DRV_NAME,
.init_chipset = init_chipset_pdc202xx,
.port_ops = &pdc20246_port_ops,
- .dma_ops = &pdc20246_dma_ops,
+ .dma_ops = &sff_dma_ops,
.host_flags = IDE_HFLAGS_PDC202XX,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,