Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86: fix default_spin_lock_flags() prototype
AMD IOMMU: __unmap_single: check for bad_dma_address instead of 0
AMD IOMMU: fix WARN_ON in dma_ops unmap path
AMD IOMMU: fix typo in comment
AMD IOMMU: fix loop counter in free_pagetable function
AMD IOMMU: fix iommu_map_page function
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index 6d74017..e6857e0 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -669,10 +669,12 @@
endif
+# TODO: BLK_DEV_IDEDMA_PCI -> BLK_DEV_IDEDMA_SFF
config BLK_DEV_IDE_PMAC
tristate "PowerMac on-board IDE support"
depends on PPC_PMAC && IDE=y
select IDE_TIMINGS
+ select BLK_DEV_IDEDMA_PCI
help
This driver provides support for the on-board IDE controller on
most of the recent Apple Power Macintoshes and PowerBooks.
@@ -689,16 +691,6 @@
CD-ROM on hda. This option changes this to more natural hda for
hard disk and hdc for CD-ROM.
-config BLK_DEV_IDEDMA_PMAC
- bool "PowerMac IDE DMA support"
- depends on BLK_DEV_IDE_PMAC
- select BLK_DEV_IDEDMA_PCI
- help
- This option allows the driver for the on-board IDE controller on
- Power Macintoshes and PowerBooks to use DMA (direct memory access)
- to transfer data to and from memory. Saying Y is safe and improves
- performance.
-
config BLK_DEV_IDE_AU1XXX
bool "IDE for AMD Alchemy Au1200"
depends on SOC_AU1200
@@ -912,7 +904,7 @@
endif
config BLK_DEV_IDEDMA
- def_bool BLK_DEV_IDEDMA_SFF || BLK_DEV_IDEDMA_PMAC || \
+ def_bool BLK_DEV_IDEDMA_SFF || \
BLK_DEV_IDEDMA_ICS || BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
endif # IDE
diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c
index 7d275b2..cc35d6d 100644
--- a/drivers/ide/ide-io.c
+++ b/drivers/ide/ide-io.c
@@ -208,8 +208,10 @@
*/
if (drive->hwif->dma_ops == NULL)
break;
- if (drive->dev_flags & IDE_DFLAG_USING_DMA)
- ide_set_dma(drive);
+ /*
+ * TODO: respect IDE_DFLAG_USING_DMA
+ */
+ ide_set_dma(drive);
break;
}
diff --git a/drivers/ide/pmac.c b/drivers/ide/pmac.c
index 2e19d62..7c481bb 100644
--- a/drivers/ide/pmac.c
+++ b/drivers/ide/pmac.c
@@ -66,7 +66,6 @@
struct macio_dev *mdev;
u32 timings[4];
volatile u32 __iomem * *kauai_fcr;
-#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
/* Those fields are duplicating what is in hwif. We currently
* can't use the hwif ones because of some assumptions that are
* beeing done by the generic code about the kind of dma controller
@@ -74,8 +73,6 @@
*/
volatile struct dbdma_regs __iomem * dma_regs;
struct dbdma_cmd* dma_table_cpu;
-#endif
-
} pmac_ide_hwif_t;
enum {
@@ -222,8 +219,6 @@
#define KAUAI_FCR_UATA_RESET_N 0x00000002
#define KAUAI_FCR_UATA_ENABLE 0x00000001
-#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
-
/* Rounded Multiword DMA timings
*
* I gave up finding a generic formula for all controller
@@ -413,8 +408,6 @@
static void pmac_ide_selectproc(ide_drive_t *drive);
static void pmac_ide_kauai_selectproc(ide_drive_t *drive);
-#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */
-
#define PMAC_IDE_REG(x) \
((void __iomem *)((drive)->hwif->io_ports.data_addr + (x)))
@@ -584,8 +577,6 @@
pmac_ide_do_update_timings(drive);
}
-#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
-
/*
* Calculate KeyLargo ATA/66 UDMA timings
*/
@@ -786,7 +777,6 @@
drive->name, speed & 0xf, *timings);
#endif
}
-#endif /* #ifdef CONFIG_BLK_DEV_IDEDMA_PMAC */
static void pmac_ide_set_dma_mode(ide_drive_t *drive, const u8 speed)
{
@@ -804,7 +794,6 @@
tl[0] = *timings;
tl[1] = *timings2;
-#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
if (speed >= XFER_UDMA_0) {
if (pmif->kind == controller_kl_ata4)
ret = set_timings_udma_ata4(&tl[0], speed);
@@ -817,7 +806,7 @@
ret = -1;
} else
set_timings_mdma(drive, pmif->kind, &tl[0], &tl[1], speed);
-#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */
+
if (ret)
return;
@@ -1008,9 +997,7 @@
.chipset = ide_pmac,
.tp_ops = &pmac_tp_ops,
.port_ops = &pmac_ide_port_ops,
-#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
.dma_ops = &pmac_dma_ops,
-#endif
.host_flags = IDE_HFLAG_SET_PIO_MODE_KEEP_DMA |
IDE_HFLAG_POST_SET_MODE |
IDE_HFLAG_MMIO |
@@ -1182,7 +1169,7 @@
pmif->regbase = regbase;
pmif->irq = irq;
pmif->kauai_fcr = NULL;
-#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
+
if (macio_resource_count(mdev) >= 2) {
if (macio_request_resource(mdev, 1, "ide-pmac (dma)"))
printk(KERN_WARNING "ide-pmac: can't request DMA "
@@ -1192,7 +1179,7 @@
pmif->dma_regs = ioremap(macio_resource_start(mdev, 1), 0x1000);
} else
pmif->dma_regs = NULL;
-#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */
+
dev_set_drvdata(&mdev->ofdev.dev, pmif);
memset(&hw, 0, sizeof(hw));
@@ -1300,9 +1287,7 @@
base = ioremap(rbase, rlen);
pmif->regbase = (unsigned long) base + 0x2000;
-#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
pmif->dma_regs = base + 0x1000;
-#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */
pmif->kauai_fcr = base;
pmif->irq = pdev->irq;
@@ -1434,8 +1419,6 @@
return error;
}
-#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
-
/*
* pmac_ide_build_dmatable builds the DBDMA command list
* for a transfer and sets the DBDMA channel to point to it.
@@ -1723,13 +1706,6 @@
return 0;
}
-#else
-static int __devinit pmac_ide_init_dma(ide_hwif_t *hwif,
- const struct ide_port_info *d)
-{
- return -EOPNOTSUPP;
-}
-#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */
module_init(pmac_ide_probe);
diff --git a/fs/exportfs/expfs.c b/fs/exportfs/expfs.c
index 80246ba..890e018 100644
--- a/fs/exportfs/expfs.c
+++ b/fs/exportfs/expfs.c
@@ -367,6 +367,8 @@
* Try to get any dentry for the given file handle from the filesystem.
*/
result = nop->fh_to_dentry(mnt->mnt_sb, fid, fh_len, fileid_type);
+ if (!result)
+ result = ERR_PTR(-ESTALE);
if (IS_ERR(result))
return result;
@@ -420,6 +422,8 @@
target_dir = nop->fh_to_parent(mnt->mnt_sb, fid,
fh_len, fileid_type);
+ if (!target_dir)
+ goto err_result;
err = PTR_ERR(target_dir);
if (IS_ERR(target_dir))
goto err_result;