usb: dwc3: remove trailing newline from dwc3_trace
when passing strings to trace, we don't need the
trailing newline character. Trace already appends a
newline character automatically.
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 0c11fd6..61edb665 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -289,16 +289,11 @@
if (!(reg & DWC3_DEPCMD_CMDACT)) {
cmd_status = DWC3_DEPCMD_STATUS(reg);
- dwc3_trace(trace_dwc3_gadget,
- "Command Complete --> %d",
- cmd_status);
-
switch (cmd_status) {
case 0:
ret = 0;
break;
case DEPEVT_TRANSFER_NO_RESOURCE:
- dwc3_trace(trace_dwc3_gadget, "no resource available");
ret = -EINVAL;
break;
case DEPEVT_TRANSFER_BUS_EXPIRY:
@@ -313,7 +308,6 @@
* give a hint to the gadget driver that this is
* the case by returning -EAGAIN.
*/
- dwc3_trace(trace_dwc3_gadget, "bus expiry");
ret = -EAGAIN;
break;
default:
@@ -325,8 +319,6 @@
} while (--timeout);
if (timeout == 0) {
- dwc3_trace(trace_dwc3_gadget,
- "Command Timed Out");
ret = -ETIMEDOUT;
cmd_status = -ETIMEDOUT;
}
@@ -1068,14 +1060,14 @@
if (!dep->endpoint.desc) {
dwc3_trace(trace_dwc3_gadget,
- "trying to queue request %p to disabled %s\n",
+ "trying to queue request %p to disabled %s",
&req->request, dep->endpoint.name);
return -ESHUTDOWN;
}
if (WARN(req->dep != dep, "request %p belongs to '%s'\n",
&req->request, req->dep->name)) {
- dwc3_trace(trace_dwc3_gadget, "request %p belongs to '%s'\n",
+ dwc3_trace(trace_dwc3_gadget, "request %p belongs to '%s'",
&req->request, req->dep->name);
return -EINVAL;
}
@@ -1179,7 +1171,7 @@
out:
if (ret && ret != -EBUSY)
dwc3_trace(trace_dwc3_gadget,
- "%s: failed to kick transfers\n",
+ "%s: failed to kick transfers",
dep->name);
if (ret == -EBUSY)
ret = 0;
@@ -1199,7 +1191,7 @@
struct usb_request *request;
struct usb_ep *ep = &dep->endpoint;
- dwc3_trace(trace_dwc3_gadget, "queueing ZLP\n");
+ dwc3_trace(trace_dwc3_gadget, "queueing ZLP");
request = dwc3_gadget_ep_alloc_request(ep, GFP_ATOMIC);
if (!request)
return -ENOMEM;
@@ -1429,7 +1421,7 @@
speed = reg & DWC3_DSTS_CONNECTSPD;
if ((speed == DWC3_DSTS_SUPERSPEED) ||
(speed == DWC3_DSTS_SUPERSPEED_PLUS)) {
- dwc3_trace(trace_dwc3_gadget, "no wakeup on SuperSpeed\n");
+ dwc3_trace(trace_dwc3_gadget, "no wakeup on SuperSpeed");
return 0;
}
@@ -1441,7 +1433,7 @@
break;
default:
dwc3_trace(trace_dwc3_gadget,
- "can't wakeup from '%s'\n",
+ "can't wakeup from '%s'",
dwc3_gadget_link_string(link_state));
return -EINVAL;
}
@@ -1963,7 +1955,7 @@
trb_status = DWC3_TRB_SIZE_TRBSTS(trb->size);
if (trb_status == DWC3_TRBSTS_MISSED_ISOC) {
dwc3_trace(trace_dwc3_gadget,
- "%s: incomplete IN transfer\n",
+ "%s: incomplete IN transfer",
dep->name);
/*
* If missed isoc occurred and there is
@@ -2161,7 +2153,7 @@
if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) {
dwc3_trace(trace_dwc3_gadget,
- "%s is an Isochronous endpoint\n",
+ "%s is an Isochronous endpoint",
dep->name);
return;
}
@@ -2189,7 +2181,7 @@
return;
dwc3_trace(trace_dwc3_gadget,
- "%s: failed to kick transfers\n",
+ "%s: failed to kick transfers",
dep->name);
}
@@ -2212,11 +2204,11 @@
/* FALLTHROUGH */
default:
dwc3_trace(trace_dwc3_gadget,
- "unable to find suitable stream\n");
+ "unable to find suitable stream");
}
break;
case DWC3_DEPEVT_RXTXFIFOEVT:
- dwc3_trace(trace_dwc3_gadget, "%s FIFO Overrun\n", dep->name);
+ dwc3_trace(trace_dwc3_gadget, "%s FIFO Overrun", dep->name);
break;
case DWC3_DEPEVT_EPCMDCMPLT:
dwc3_trace(trace_dwc3_gadget, "Endpoint Command Complete");
@@ -2934,7 +2926,7 @@
*/
if (dwc->revision < DWC3_REVISION_220A)
dwc3_trace(trace_dwc3_gadget,
- "Changing max_speed on rev %08x\n",
+ "Changing max_speed on rev %08x",
dwc->revision);
dwc->gadget.max_speed = dwc->maximum_speed;