Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: plat-orion: make gpiochip label unique
enable uncompress log on cpuimx35sd
cpuimx35: fix touchscreen support
cpuimx35sd: fix Kconfig
clock-imx35: fix reboot in internal boot mode
dma: MX3_IPU fix depends
imx_v4_v5_defconfig: update default configuration
cpuimx25sd: fix Kconfig
arm/imx: fix cpufreq section mismatch
ARM:imx:fix pwm period value
ARM: OMAP: hwmod data: fix iva and mailbox hwmods for OMAP 3
diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig
index 11a4192..cf497ce 100644
--- a/arch/arm/configs/imx_v4_v5_defconfig
+++ b/arch/arm/configs/imx_v4_v5_defconfig
@@ -18,9 +18,10 @@
CONFIG_ARCH_IMX_V4_V5=y
CONFIG_ARCH_MX1ADS=y
CONFIG_MACH_SCB9328=y
+CONFIG_MACH_APF9328=y
CONFIG_MACH_MX21ADS=y
CONFIG_MACH_MX25_3DS=y
-CONFIG_MACH_EUKREA_CPUIMX25=y
+CONFIG_MACH_EUKREA_CPUIMX25SD=y
CONFIG_MACH_MX27ADS=y
CONFIG_MACH_PCM038=y
CONFIG_MACH_CPUIMX27=y
@@ -72,17 +73,16 @@
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_MXC=y
CONFIG_MTD_UBI=y
CONFIG_MISC_DEVICES=y
CONFIG_EEPROM_AT24=y
CONFIG_EEPROM_AT25=y
CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
CONFIG_DM9000=y
+CONFIG_SMC91X=y
CONFIG_SMC911X=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
+CONFIG_SMSC_PHY=y
# CONFIG_INPUT_MOUSEDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_KEYBOARD is not set
@@ -100,6 +100,7 @@
CONFIG_I2C_IMX=y
CONFIG_SPI=y
CONFIG_SPI_IMX=y
+CONFIG_SPI_SPIDEV=y
CONFIG_W1=y
CONFIG_W1_MASTER_MXC=y
CONFIG_W1_SLAVE_THERM=y
@@ -139,6 +140,7 @@
CONFIG_MMC_MXC=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
CONFIG_LEDS_MC13783=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index c44aa97..0e6f1af 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -132,7 +132,7 @@
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
-config MACH_EUKREA_CPUIMX25
+config MACH_EUKREA_CPUIMX25SD
bool "Support Eukrea CPUIMX25 Platform"
select SOC_IMX25
select IMX_HAVE_PLATFORM_FLEXCAN
@@ -148,7 +148,7 @@
choice
prompt "Baseboard"
- depends on MACH_EUKREA_CPUIMX25
+ depends on MACH_EUKREA_CPUIMX25SD
default MACH_EUKREA_MBIMXSD25_BASEBOARD
config MACH_EUKREA_MBIMXSD25_BASEBOARD
@@ -542,7 +542,7 @@
Include support for MX35PDK platform. This includes specific
configurations for the board and its peripherals.
-config MACH_EUKREA_CPUIMX35
+config MACH_EUKREA_CPUIMX35SD
bool "Support Eukrea CPUIMX35 Platform"
select SOC_IMX35
select IMX_HAVE_PLATFORM_FLEXCAN
@@ -560,7 +560,7 @@
choice
prompt "Baseboard"
- depends on MACH_EUKREA_CPUIMX35
+ depends on MACH_EUKREA_CPUIMX35SD
default MACH_EUKREA_MBIMXSD35_BASEBOARD
config MACH_EUKREA_MBIMXSD35_BASEBOARD
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index aba7321..d97f409 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -24,7 +24,7 @@
# i.MX25 based machines
obj-$(CONFIG_MACH_MX25_3DS) += mach-mx25_3ds.o
-obj-$(CONFIG_MACH_EUKREA_CPUIMX25) += mach-eukrea_cpuimx25.o
+obj-$(CONFIG_MACH_EUKREA_CPUIMX25SD) += mach-eukrea_cpuimx25.o
obj-$(CONFIG_MACH_EUKREA_MBIMXSD25_BASEBOARD) += eukrea_mbimxsd25-baseboard.o
# i.MX27 based machines
@@ -57,7 +57,7 @@
# i.MX35 based machines
obj-$(CONFIG_MACH_PCM043) += mach-pcm043.o
obj-$(CONFIG_MACH_MX35_3DS) += mach-mx35_3ds.o
-obj-$(CONFIG_MACH_EUKREA_CPUIMX35) += mach-cpuimx35.o
+obj-$(CONFIG_MACH_EUKREA_CPUIMX35SD) += mach-cpuimx35.o
obj-$(CONFIG_MACH_EUKREA_MBIMXSD35_BASEBOARD) += eukrea_mbimxsd35-baseboard.o
obj-$(CONFIG_MACH_VPR200) += mach-vpr200.o
diff --git a/arch/arm/mach-imx/clock-imx35.c b/arch/arm/mach-imx/clock-imx35.c
index 8116f11..ac8238c 100644
--- a/arch/arm/mach-imx/clock-imx35.c
+++ b/arch/arm/mach-imx/clock-imx35.c
@@ -507,7 +507,7 @@
int __init mx35_clocks_init()
{
- unsigned int cgr2 = 3 << 26, cgr3 = 0;
+ unsigned int cgr2 = 3 << 26;
#if defined(CONFIG_DEBUG_LL) && !defined(CONFIG_DEBUG_ICEDCC)
cgr2 |= 3 << 16;
@@ -521,6 +521,12 @@
__raw_writel((3 << 18), CCM_BASE + CCM_CGR0);
__raw_writel((3 << 2) | (3 << 4) | (3 << 6) | (3 << 8) | (3 << 16),
CCM_BASE + CCM_CGR1);
+ __raw_writel(cgr2, CCM_BASE + CCM_CGR2);
+ __raw_writel(0, CCM_BASE + CCM_CGR3);
+
+ clk_enable(&iim_clk);
+ imx_print_silicon_rev("i.MX35", mx35_revision());
+ clk_disable(&iim_clk);
/*
* Check if we came up in internal boot mode. If yes, we need some
@@ -529,17 +535,11 @@
*/
if (!(__raw_readl(CCM_BASE + CCM_RCSR) & (3 << 10))) {
/* Additionally turn on UART1, SCC, and IIM clocks */
- cgr2 |= 3 << 16 | 3 << 4;
- cgr3 |= 3 << 2;
+ clk_enable(&iim_clk);
+ clk_enable(&uart1_clk);
+ clk_enable(&scc_clk);
}
- __raw_writel(cgr2, CCM_BASE + CCM_CGR2);
- __raw_writel(cgr3, CCM_BASE + CCM_CGR3);
-
- clk_enable(&iim_clk);
- imx_print_silicon_rev("i.MX35", mx35_revision());
- clk_disable(&iim_clk);
-
#ifdef CONFIG_MXC_USE_EPIT
epit_timer_init(&epit1_clk,
MX35_IO_ADDRESS(MX35_EPIT1_BASE_ADDR), MX35_INT_EPIT1);
diff --git a/arch/arm/mach-imx/mach-cpuimx35.c b/arch/arm/mach-imx/mach-cpuimx35.c
index 66af2e8..362aae7 100644
--- a/arch/arm/mach-imx/mach-cpuimx35.c
+++ b/arch/arm/mach-imx/mach-cpuimx35.c
@@ -53,12 +53,18 @@
.bitrate = 100000,
};
+#define TSC2007_IRQGPIO IMX_GPIO_NR(3, 2)
+static int tsc2007_get_pendown_state(void)
+{
+ return !gpio_get_value(TSC2007_IRQGPIO);
+}
+
static struct tsc2007_platform_data tsc2007_info = {
.model = 2007,
.x_plate_ohms = 180,
+ .get_pendown_state = tsc2007_get_pendown_state,
};
-#define TSC2007_IRQGPIO IMX_GPIO_NR(3, 2)
static struct i2c_board_info eukrea_cpuimx35_i2c_devices[] = {
{
I2C_BOARD_INFO("pcf8563", 0x51),
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index 7f8915a..eef43e2 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -3247,18 +3247,14 @@
/* 3430ES1-only hwmods */
static __initdata struct omap_hwmod *omap3430es1_hwmods[] = {
- &omap3xxx_iva_hwmod,
&omap3430es1_dss_core_hwmod,
- &omap3xxx_mailbox_hwmod,
NULL
};
/* 3430ES2+-only hwmods */
static __initdata struct omap_hwmod *omap3430es2plus_hwmods[] = {
- &omap3xxx_iva_hwmod,
&omap3xxx_dss_core_hwmod,
&omap3xxx_usbhsotg_hwmod,
- &omap3xxx_mailbox_hwmod,
NULL
};
diff --git a/arch/arm/plat-mxc/cpufreq.c b/arch/arm/plat-mxc/cpufreq.c
index adbff70..73db34b 100644
--- a/arch/arm/plat-mxc/cpufreq.c
+++ b/arch/arm/plat-mxc/cpufreq.c
@@ -98,7 +98,7 @@
return ret;
}
-static int __init mxc_cpufreq_init(struct cpufreq_policy *policy)
+static int mxc_cpufreq_init(struct cpufreq_policy *policy)
{
int ret;
int i;
diff --git a/arch/arm/plat-mxc/include/mach/uncompress.h b/arch/arm/plat-mxc/include/mach/uncompress.h
index 88fd404..477971b 100644
--- a/arch/arm/plat-mxc/include/mach/uncompress.h
+++ b/arch/arm/plat-mxc/include/mach/uncompress.h
@@ -98,6 +98,7 @@
case MACH_TYPE_PCM043:
case MACH_TYPE_LILLY1131:
case MACH_TYPE_VPR200:
+ case MACH_TYPE_EUKREA_CPUIMX35SD:
uart_base = MX3X_UART1_BASE_ADDR;
break;
case MACH_TYPE_MAGX_ZN5:
diff --git a/arch/arm/plat-mxc/pwm.c b/arch/arm/plat-mxc/pwm.c
index 845de59..e032717 100644
--- a/arch/arm/plat-mxc/pwm.c
+++ b/arch/arm/plat-mxc/pwm.c
@@ -77,6 +77,15 @@
do_div(c, period_ns);
duty_cycles = c;
+ /*
+ * according to imx pwm RM, the real period value should be
+ * PERIOD value in PWMPR plus 2.
+ */
+ if (period_cycles > 2)
+ period_cycles -= 2;
+ else
+ period_cycles = 0;
+
writel(duty_cycles, pwm->mmio_base + MX3_PWMSAR);
writel(period_cycles, pwm->mmio_base + MX3_PWMPR);
diff --git a/arch/arm/plat-orion/gpio.c b/arch/arm/plat-orion/gpio.c
index 41ab97e..10d1608 100644
--- a/arch/arm/plat-orion/gpio.c
+++ b/arch/arm/plat-orion/gpio.c
@@ -384,12 +384,16 @@
struct orion_gpio_chip *ochip;
struct irq_chip_generic *gc;
struct irq_chip_type *ct;
+ char gc_label[16];
if (orion_gpio_chip_count == ARRAY_SIZE(orion_gpio_chips))
return;
+ snprintf(gc_label, sizeof(gc_label), "orion_gpio%d",
+ orion_gpio_chip_count);
+
ochip = orion_gpio_chips + orion_gpio_chip_count;
- ochip->chip.label = "orion_gpio";
+ ochip->chip.label = kstrdup(gc_label, GFP_KERNEL);
ochip->chip.request = orion_gpio_request;
ochip->chip.direction_input = orion_gpio_direction_input;
ochip->chip.get = orion_gpio_get;
diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index ab8f469..5a99bb3 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -124,7 +124,7 @@
config MX3_IPU
bool "MX3x Image Processing Unit support"
- depends on ARCH_MX3
+ depends on SOC_IMX31 || SOC_IMX35
select DMA_ENGINE
default y
help
@@ -216,7 +216,7 @@
config IMX_SDMA
tristate "i.MX SDMA support"
- depends on ARCH_MX25 || ARCH_MX3 || ARCH_MX5
+ depends on ARCH_MX25 || SOC_IMX31 || SOC_IMX35 || ARCH_MX5
select DMA_ENGINE
help
Support the i.MX SDMA engine. This engine is integrated into