ACPI / gpio: Add irq_type when a GPIO is used as an interrupt
When a GPIO is used as an interrupt in ACPI, the irq_type was not
available for device driver.
Make available polarity and triggering information in acpi_find_gpio by
renaming acpi_gpio_info field active_low to polarity and adding triggering
field (edge/level).
For sanity, in gpiolib.c replace info.active_low by
"info.polarity == GPIO_ACTIVE_LOW".
Set the irq_type if necessary in acpi_dev_gpio_irq_get.
Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
diff --git a/drivers/gpio/gpiolib-acpi.c b/drivers/gpio/gpiolib-acpi.c
index 16a7b68..cbbb67a 100644
--- a/drivers/gpio/gpiolib-acpi.c
+++ b/drivers/gpio/gpiolib-acpi.c
@@ -417,10 +417,15 @@
* ActiveLow is only specified for GpioInt resource. If
* GpioIo is used then the only way to set the flag is
* to use _DSD "gpios" property.
+ * Note: we expect here:
+ * - ACPI_ACTIVE_LOW == GPIO_ACTIVE_LOW
+ * - ACPI_ACTIVE_HIGH == GPIO_ACTIVE_HIGH
*/
- if (lookup->info.gpioint)
- lookup->info.active_low =
- agpio->polarity == ACPI_ACTIVE_LOW;
+ if (lookup->info.gpioint) {
+ lookup->info.polarity = agpio->polarity;
+ lookup->info.triggering = agpio->triggering;
+ }
+
}
return 1;
@@ -447,7 +452,7 @@
if (info) {
*info = lookup->info;
if (lookup->active_low)
- info->active_low = lookup->active_low;
+ info->polarity = lookup->active_low;
}
return 0;
}
@@ -595,6 +600,7 @@
int acpi_dev_gpio_irq_get(struct acpi_device *adev, int index)
{
int idx, i;
+ unsigned int irq_flags;
for (i = 0, idx = 0; idx <= index; i++) {
struct acpi_gpio_info info;
@@ -603,8 +609,23 @@
desc = acpi_get_gpiod_by_index(adev, NULL, i, &info);
if (IS_ERR(desc))
break;
- if (info.gpioint && idx++ == index)
- return gpiod_to_irq(desc);
+ if (info.gpioint && idx++ == index) {
+ int irq = gpiod_to_irq(desc);
+
+ if (irq < 0)
+ return irq;
+
+ irq_flags = acpi_dev_get_irq_type(info.triggering,
+ info.polarity);
+
+ /* Set type if specified and different than the current one */
+ if (irq_flags != IRQ_TYPE_NONE &&
+ irq_flags != irq_get_trigger_type(irq))
+ irq_set_irq_type(irq, irq_flags);
+
+ return irq;
+ }
+
}
return -ENOENT;
}
diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index 4e4c308..5d8d7ab 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -1879,7 +1879,7 @@
return desc;
}
- if (info.active_low)
+ if (info.polarity == GPIO_ACTIVE_LOW)
*flags |= GPIO_ACTIVE_LOW;
return desc;
@@ -2217,7 +2217,7 @@
desc = acpi_node_get_gpiod(fwnode, propname, 0, &info);
if (!IS_ERR(desc))
- active_low = info.active_low;
+ active_low = info.polarity == GPIO_ACTIVE_LOW;
}
if (IS_ERR(desc))
diff --git a/drivers/gpio/gpiolib.h b/drivers/gpio/gpiolib.h
index 98ab08c..5ac3b88 100644
--- a/drivers/gpio/gpiolib.h
+++ b/drivers/gpio/gpiolib.h
@@ -26,7 +26,8 @@
*/
struct acpi_gpio_info {
bool gpioint;
- bool active_low;
+ int polarity;
+ int triggering;
};
/* gpio suffixes used for ACPI and device tree lookup */