[PATCH] pcmcia: add some Documentation
Add some information useful for PCMCIA device driver authors to
Documentation/pcmcia/, and reference it in dmesg in case of hash mismatches.
Also add a reference to pcmciautils to Documentation/Changes. With recent
changes, you don't need to concern yourself with pcmcia-cs even if you have
PCMCIA hardware, so the example above the list needed to be adapted as well.
Signed-off-by: Dominik Brodowski <linux@dominikbrodowksi.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
diff --git a/Documentation/pcmcia/driver-changes.txt b/Documentation/pcmcia/driver-changes.txt
new file mode 100644
index 0000000..9c315ab
--- /dev/null
+++ b/Documentation/pcmcia/driver-changes.txt
@@ -0,0 +1,51 @@
+This file details changes in 2.6 which affect PCMCIA card driver authors:
+
+* in-kernel device<->driver matching
+ PCMCIA devices and their correct drivers can now be matched in
+ kernelspace. See 'devicetable.txt' for details.
+
+* Device model integration (as of 2.6.11)
+ A struct pcmcia_device is registered with the device model core,
+ and can be used (e.g. for SET_NETDEV_DEV) by using
+ handle_to_dev(client_handle_t * handle).
+
+* Convert internal I/O port addresses to unsigned long (as of 2.6.11)
+ ioaddr_t should be replaced by kio_addr_t in PCMCIA card drivers.
+
+* irq_mask and irq_list parameters (as of 2.6.11)
+ The irq_mask and irq_list parameters should no longer be used in
+ PCMCIA card drivers. Instead, it is the job of the PCMCIA core to
+ determine which IRQ should be used. Therefore, link->irq.IRQInfo2
+ is ignored.
+
+* client->PendingEvents is gone (as of 2.6.11)
+ client->PendingEvents is no longer available.
+
+* client->Attributes are gone (as of 2.6.11)
+ client->Attributes is unused, therefore it is removed from all
+ PCMCIA card drivers
+
+* core functions no longer available (as of 2.6.11)
+ The following functions have been removed from the kernel source
+ because they are unused by all in-kernel drivers, and no external
+ driver was reported to rely on them:
+ pcmcia_get_first_region()
+ pcmcia_get_next_region()
+ pcmcia_modify_window()
+ pcmcia_set_event_mask()
+ pcmcia_get_first_window()
+ pcmcia_get_next_window()
+
+* device list iteration upon module removal (as of 2.6.10)
+ It is no longer necessary to iterate on the driver's internal
+ client list and call the ->detach() function upon module removal.
+
+* Resource management. (as of 2.6.8)
+ Although the PCMCIA subsystem will allocate resources for cards,
+ it no longer marks these resources busy. This means that driver
+ authors are now responsible for claiming your resources as per
+ other drivers in Linux. You should use request_region() to mark
+ your IO regions in-use, and request_mem_region() to mark your
+ memory regions in-use. The name argument should be a pointer to
+ your driver name. Eg, for pcnet_cs, name should point to the
+ string "pcnet_cs".