can: ifi: Unify timing constants
There is no distinction between bittiming constants for the slow and
fast part of the CANFD operation on this controller, so just use one
single bittiming constant set.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Oliver Hartkopp <socketcan@hartkopp.net>
Cc: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
diff --git a/drivers/net/can/ifi_canfd/ifi_canfd.c b/drivers/net/can/ifi_canfd/ifi_canfd.c
index b9efd6e..30dc3b6 100644
--- a/drivers/net/can/ifi_canfd/ifi_canfd.c
+++ b/drivers/net/can/ifi_canfd/ifi_canfd.c
@@ -544,18 +544,6 @@
.brp_inc = 1,
};
-static const struct can_bittiming_const ifi_canfd_data_bittiming_const = {
- .name = KBUILD_MODNAME,
- .tseg1_min = 1, /* Time segment 1 = prop_seg + phase_seg1 */
- .tseg1_max = 256,
- .tseg2_min = 2, /* Time segment 2 = phase_seg2 */
- .tseg2_max = 256,
- .sjw_max = 128,
- .brp_min = 2,
- .brp_max = 512,
- .brp_inc = 1,
-};
-
static void ifi_canfd_set_bittiming(struct net_device *ndev)
{
struct ifi_canfd_priv *priv = netdev_priv(ndev);
@@ -866,7 +854,7 @@
priv->can.clock.freq = readl(addr + IFI_CANFD_CANCLOCK);
priv->can.bittiming_const = &ifi_canfd_bittiming_const;
- priv->can.data_bittiming_const = &ifi_canfd_data_bittiming_const;
+ priv->can.data_bittiming_const = &ifi_canfd_bittiming_const;
priv->can.do_set_mode = ifi_canfd_set_mode;
priv->can.do_get_berr_counter = ifi_canfd_get_berr_counter;