Merge tag 'omap-for-v3.13/cm-scm-cleanup-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/cleanup
From Paul Walmsley <paul@pwsan.com> via Tony Lindgren:
Move some of the OMAP2+ CM and System Control Module direct
register accesses into CM- and System Control
Module-specific "drivers" underneath arch/arm/mach-omap2/. This
is a prerequisite for moving this code out of arch/arm/mach-omap2/ into
drivers/.
Basic test logs are available here:
http://www.pwsan.com/omap/testlogs/cm_scm_cleanup_a_v3.13/20131019101809/
* tag 'omap-for-v3.13/cm-scm-cleanup-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP3: control: add API for setting IVA bootmode
ARM: OMAP3: CM/control: move CM scratchpad save to CM driver
ARM: OMAP3: McBSP: do not access CM register directly
ARM: OMAP3: clock: add API to enable/disable autoidle for a single clock
ARM: OMAP2: CM/PM: remove direct register accesses outside CM code
+ Linux 3.12-rc4
Signed-off-by: Olof Johansson <olof@lixom.net>
diff --git a/MAINTAINERS b/MAINTAINERS
index 8a0cbf3..ff1b469 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -763,6 +763,10 @@
W: http://www.linux4sam.org
S: Supported
F: arch/arm/mach-at91/
+F: arch/arm/boot/dts/at91*.dts
+F: arch/arm/boot/dts/at91*.dtsi
+F: arch/arm/boot/dts/sama*.dts
+F: arch/arm/boot/dts/sama*.dtsi
ARM/CALXEDA HIGHBANK ARCHITECTURE
M: Rob Herring <rob.herring@calxeda.com>
@@ -1148,11 +1152,6 @@
F: drivers/net/ethernet/seeq/ether3*
F: drivers/scsi/arm/
-ARM/SHARK MACHINE SUPPORT
-M: Alexander Schulz <alex@shark-linux.de>
-W: http://www.shark-linux.de/shark.html
-S: Maintained
-
ARM/SAMSUNG ARM ARCHITECTURES
M: Ben Dooks <ben-linux@fluff.org>
M: Kukjin Kim <kgene.kim@samsung.com>
@@ -1160,6 +1159,8 @@
L: linux-samsung-soc@vger.kernel.org (moderated for non-subscribers)
W: http://www.fluff.org/ben/linux/
S: Maintained
+F: arch/arm/boot/dts/s3c*
+F: arch/arm/boot/dts/exynos*
F: arch/arm/plat-samsung/
F: arch/arm/mach-s3c24*/
F: arch/arm/mach-s3c64xx/
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 1ad6fb6..25ad39a 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -358,7 +358,6 @@
bool "Atmel AT91"
select ARCH_REQUIRE_GPIOLIB
select CLKDEV_LOOKUP
- select HAVE_CLK
select IRQ_DOMAIN
select NEED_MACH_GPIO_H
select NEED_MACH_IO_H if PCCARD
@@ -372,7 +371,6 @@
bool "Cirrus Logic CLPS711x/EP721x/EP731x-based"
select ARCH_REQUIRE_GPIOLIB
select AUTO_ZRELADDR
- select CLKDEV_LOOKUP
select CLKSRC_MMIO
select COMMON_CLK
select CPU_ARM720T
@@ -631,7 +629,6 @@
config ARCH_MSM
bool "Qualcomm MSM"
select ARCH_REQUIRE_GPIOLIB
- select CLKDEV_LOOKUP
select CLKSRC_OF if OF
select COMMON_CLK
select GENERIC_CLOCKEVENTS
@@ -649,7 +646,6 @@
select GENERIC_CLOCKEVENTS
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
- select HAVE_CLK
select HAVE_MACH_CLKDEV
select HAVE_SMP
select MIGHT_HAVE_CACHE_L2X0
@@ -706,7 +702,6 @@
select CLKSRC_SAMSUNG_PWM
select GENERIC_CLOCKEVENTS
select GPIO_SAMSUNG
- select HAVE_CLK
select HAVE_S3C2410_I2C if I2C
select HAVE_S3C2410_WATCHDOG if WATCHDOG
select HAVE_S3C_RTC if RTC_CLASS
@@ -730,18 +725,19 @@
select CPU_V6
select GENERIC_CLOCKEVENTS
select GPIO_SAMSUNG
- select HAVE_CLK
select HAVE_S3C2410_I2C if I2C
select HAVE_S3C2410_WATCHDOG if WATCHDOG
select HAVE_TCM
select NEED_MACH_GPIO_H
select NO_IOPORT
select PLAT_SAMSUNG
+ select PM_GENERIC_DOMAINS
select S3C_DEV_NAND
select S3C_GPIO_TRACK
select SAMSUNG_ATAGS
select SAMSUNG_CLKSRC
select SAMSUNG_GPIOLIB_4BIT
+ select SAMSUNG_WAKEMASK
select SAMSUNG_WDT_RESET
select USB_ARCH_HAS_OHCI
help
@@ -754,7 +750,6 @@
select CPU_V6
select GENERIC_CLOCKEVENTS
select GPIO_SAMSUNG
- select HAVE_CLK
select HAVE_S3C2410_I2C if I2C
select HAVE_S3C2410_WATCHDOG if WATCHDOG
select HAVE_S3C_RTC if RTC_CLASS
@@ -773,7 +768,6 @@
select CPU_V7
select GENERIC_CLOCKEVENTS
select GPIO_SAMSUNG
- select HAVE_CLK
select HAVE_S3C2410_I2C if I2C
select HAVE_S3C2410_WATCHDOG if WATCHDOG
select HAVE_S3C_RTC if RTC_CLASS
@@ -793,7 +787,6 @@
select CPU_V7
select GENERIC_CLOCKEVENTS
select GPIO_SAMSUNG
- select HAVE_CLK
select HAVE_S3C2410_I2C if I2C
select HAVE_S3C2410_WATCHDOG if WATCHDOG
select HAVE_S3C_RTC if RTC_CLASS
@@ -810,11 +803,9 @@
select ARCH_REQUIRE_GPIOLIB
select ARCH_SPARSEMEM_ENABLE
select ARM_GIC
- select CLKDEV_LOOKUP
select COMMON_CLK
select CPU_V7
select GENERIC_CLOCKEVENTS
- select HAVE_CLK
select HAVE_S3C2410_I2C if I2C
select HAVE_S3C2410_WATCHDOG if WATCHDOG
select HAVE_S3C_RTC if RTC_CLASS
@@ -824,20 +815,6 @@
help
Support for SAMSUNG's EXYNOS SoCs (EXYNOS4/5)
-config ARCH_SHARK
- bool "Shark"
- select ARCH_USES_GETTIMEOFFSET
- select CPU_SA110
- select ISA
- select ISA_DMA
- select NEED_MACH_MEMORY_H
- select PCI
- select VIRT_TO_BUS
- select ZONE_DMA
- help
- Support for the StrongARM based Digital DNARD machine, also known
- as "Shark" (<http://www.shark-linux.de/shark.html>).
-
config ARCH_DAVINCI
bool "TI DaVinci"
select ARCH_HAS_HOLES_MEMORYMODEL
@@ -865,7 +842,6 @@
select CLKSRC_MMIO
select GENERIC_CLOCKEVENTS
select GENERIC_IRQ_CHIP
- select HAVE_CLK
select HAVE_IDE
select IRQ_DOMAIN
select NEED_MACH_IO_H if PCCARD
@@ -1009,9 +985,7 @@
source "arch/arm/mach-s3c24xx/Kconfig"
-if ARCH_S3C64XX
source "arch/arm/mach-s3c64xx/Kconfig"
-endif
source "arch/arm/mach-s5p64x0/Kconfig"
@@ -1431,12 +1405,6 @@
config PCI_SYSCALL
def_bool PCI
-# Select the host bridge type
-config PCI_HOST_VIA82C505
- bool
- depends on PCI && ARCH_SHARK
- default y
-
config PCI_HOST_ITE8152
bool
depends on PCI && MACH_ARMCORE
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index a37a50f..92a90fe 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -188,7 +188,6 @@
machine-$(CONFIG_ARCH_S5PC100) += s5pc100
machine-$(CONFIG_ARCH_S5PV210) += s5pv210
machine-$(CONFIG_ARCH_SA1100) += sa1100
-machine-$(CONFIG_ARCH_SHARK) += shark
machine-$(CONFIG_ARCH_SHMOBILE) += shmobile
machine-$(CONFIG_ARCH_SHMOBILE_MULTI) += shmobile
machine-$(CONFIG_ARCH_SIRF) += prima2
diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile
index 7ac1610..e7190bb 100644
--- a/arch/arm/boot/compressed/Makefile
+++ b/arch/arm/boot/compressed/Makefile
@@ -44,10 +44,6 @@
OBJS += ll_char_wr.o font.o
endif
-ifeq ($(CONFIG_ARCH_SHARK),y)
-OBJS += head-shark.o ofw-shark.o
-endif
-
ifeq ($(CONFIG_ARCH_SA1100),y)
OBJS += head-sa1100.o
endif
diff --git a/arch/arm/boot/compressed/head-shark.S b/arch/arm/boot/compressed/head-shark.S
deleted file mode 100644
index 92b5689..0000000
--- a/arch/arm/boot/compressed/head-shark.S
+++ /dev/null
@@ -1,140 +0,0 @@
-/* The head-file for the Shark
- * by Alexander Schulz
- *
- * Does the following:
- * - get the memory layout from firmware. This can only be done as long as the mmu
- * is still on.
- * - switch the mmu off, so we have physical addresses
- * - copy the kernel to 0x08508000. This is done to have a fixed address where the
- * C-parts (misc.c) are executed. This address must be known at compile-time,
- * but the load-address of the kernel depends on how much memory is installed.
- * - Jump to this location.
- * - Set r8 with 0, r7 with the architecture ID for head.S
- */
-
-#include <linux/linkage.h>
-
-#include <asm/assembler.h>
-
- .section ".start", "ax"
-
- .arch armv4
- b __beginning
-
-__ofw_data: .long 0 @ the number of memory blocks
- .space 128 @ (startaddr,size) ...
- .space 128 @ bootargs
- .align
-
-__beginning: mov r4, r0 @ save the entry to the firmware
-
- mov r0, #0xC0 @ disable irq and fiq
- mov r1, r0
- mrs r3, cpsr
- bic r2, r3, r0
- eor r2, r2, r1
- msr cpsr_c, r2
-
- mov r0, r4 @ get the Memory layout from firmware
- adr r1, __ofw_data
- add r2, r1, #4
- mov lr, pc
- b ofw_init
- mov r1, #0
-
- adr r2, __mmu_off @ calculate physical address
- sub r2, r2, #0xf0000000 @ openprom maps us at f000 virt, 0e50 phys
- adr r0, __ofw_data
- ldr r0, [r0, #4]
- add r2, r2, r0
- add r2, r2, #0x00500000
-
- mrc p15, 0, r3, c1, c0
- bic r3, r3, #0xC @ Write Buffer and DCache
- bic r3, r3, #0x1000 @ ICache
- mcr p15, 0, r3, c1, c0 @ disabled
-
- mov r0, #0
- mcr p15, 0, r0, c7, c7 @ flush I,D caches on v4
- mcr p15, 0, r0, c7, c10, 4 @ drain write buffer on v4
- mcr p15, 0, r0, c8, c7 @ flush I,D TLBs on v4
-
- bic r3, r3, #0x1 @ MMU
- mcr p15, 0, r3, c1, c0 @ disabled
-
- mov pc, r2
-
-__copy_target: .long 0x08507FFC
-__copy_end: .long 0x08607FFC
-
- .word _start
- .word __bss_start
-
- .align
-__temp_stack: .space 128
-
-__mmu_off:
- adr r0, __ofw_data @ read the 1. entry of the memory map
- ldr r0, [r0, #4]
- orr r0, r0, #0x00600000
- sub r0, r0, #4
-
- ldr r1, __copy_end
- ldr r3, __copy_target
-
-/* r0 = 0x0e600000 (current end of kernelcode)
- * r3 = 0x08508000 (where it should begin)
- * r1 = 0x08608000 (end of copying area, 1MB)
- * The kernel is compressed, so 1 MB should be enough.
- * copy the kernel to the beginning of physical memory
- * We start from the highest address, so we can copy
- * from 0x08500000 to 0x08508000 if we have only 8MB
- */
-
-/* As we get more 2.6-kernels it gets more and more
- * uncomfortable to be bound to kernel images of 1MB only.
- * So we add a loop here, to be able to copy some more.
- * Alexander Schulz 2005-07-17
- */
-
- mov r4, #3 @ How many megabytes to copy
-
-
-__MoveCode: sub r4, r4, #1
-
-__Copy: ldr r2, [r0], #-4
- str r2, [r1], #-4
- teq r1, r3
- bne __Copy
-
- /* The firmware maps us in blocks of 1 MB, the next block is
- _below_ the last one. So our decrementing source pointer
- ist right here, but the destination pointer must be increased
- by 2 MB */
- add r1, r1, #0x00200000
- add r3, r3, #0x00100000
-
- teq r4, #0
- bne __MoveCode
-
-
- /* and jump to it */
- adr r2, __go_on @ where we want to jump
- adr r0, __ofw_data @ read the 1. entry of the memory map
- ldr r0, [r0, #4]
- sub r2, r2, r0 @ we are mapped add 0e50 now, sub that (-0e00)
- sub r2, r2, #0x00500000 @ -0050
- ldr r0, __copy_target @ and add 0850 8000 instead
- add r0, r0, #4
- add r2, r2, r0
- mov pc, r2 @ and jump there
-
-__go_on:
- adr sp, __temp_stack
- add sp, sp, #128
- adr r0, __ofw_data
- mov lr, pc
- b create_params
-
- mov r8, #0
- mov r7, #15
diff --git a/arch/arm/boot/compressed/ofw-shark.c b/arch/arm/boot/compressed/ofw-shark.c
deleted file mode 100644
index 465c54b..0000000
--- a/arch/arm/boot/compressed/ofw-shark.c
+++ /dev/null
@@ -1,260 +0,0 @@
-/*
- * linux/arch/arm/boot/compressed/ofw-shark.c
- *
- * by Alexander Schulz
- *
- * This file is used to get some basic information
- * about the memory layout of the shark we are running
- * on. Memory is usually divided in blocks a 8 MB.
- * And bootargs are copied from OpenFirmware.
- */
-
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <asm/setup.h>
-#include <asm/page.h>
-
-
-asmlinkage void
-create_params (unsigned long *buffer)
-{
- /* Is there a better address? Also change in mach-shark/core.c */
- struct tag *tag = (struct tag *) 0x08003000;
- int j,i,m,k,nr_banks,size;
- unsigned char *c;
-
- k = 0;
-
- /* Head of the taglist */
- tag->hdr.tag = ATAG_CORE;
- tag->hdr.size = tag_size(tag_core);
- tag->u.core.flags = 1;
- tag->u.core.pagesize = PAGE_SIZE;
- tag->u.core.rootdev = 0;
-
- /* Build up one tagged block for each memory region */
- size=0;
- nr_banks=(unsigned int) buffer[0];
- for (j=0;j<nr_banks;j++){
- /* search the lowest address and put it into the next entry */
- /* not a fast sort algorithm, but there are at most 8 entries */
- /* and this is used only once anyway */
- m=0xffffffff;
- for (i=0;i<(unsigned int) buffer[0];i++){
- if (buffer[2*i+1]<m) {
- m=buffer[2*i+1];
- k=i;
- }
- }
-
- tag = tag_next(tag);
- tag->hdr.tag = ATAG_MEM;
- tag->hdr.size = tag_size(tag_mem32);
- tag->u.mem.size = buffer[2*k+2];
- tag->u.mem.start = buffer[2*k+1];
-
- size += buffer[2*k+2];
-
- buffer[2*k+1]=0xffffffff; /* mark as copied */
- }
-
- /* The command line */
- tag = tag_next(tag);
- tag->hdr.tag = ATAG_CMDLINE;
-
- c=(unsigned char *)(&buffer[34]);
- j=0;
- while (*c) tag->u.cmdline.cmdline[j++]=*c++;
-
- tag->u.cmdline.cmdline[j]=0;
- tag->hdr.size = (j + 7 + sizeof(struct tag_header)) >> 2;
-
- /* Hardware revision */
- tag = tag_next(tag);
- tag->hdr.tag = ATAG_REVISION;
- tag->hdr.size = tag_size(tag_revision);
- tag->u.revision.rev = ((unsigned char) buffer[33])-'0';
-
- /* End of the taglist */
- tag = tag_next(tag);
- tag->hdr.tag = 0;
- tag->hdr.size = 0;
-}
-
-
-typedef int (*ofw_handle_t)(void *);
-
-/* Everything below is called with a wrong MMU setting.
- * This means: no string constants, no initialization of
- * arrays, no global variables! This is ugly but I didn't
- * want to write this in assembler :-)
- */
-
-int
-of_decode_int(const unsigned char *p)
-{
- unsigned int i = *p++ << 8;
- i = (i + *p++) << 8;
- i = (i + *p++) << 8;
- return (i + *p);
-}
-
-int
-OF_finddevice(ofw_handle_t openfirmware, char *name)
-{
- unsigned int args[8];
- char service[12];
-
- service[0]='f';
- service[1]='i';
- service[2]='n';
- service[3]='d';
- service[4]='d';
- service[5]='e';
- service[6]='v';
- service[7]='i';
- service[8]='c';
- service[9]='e';
- service[10]='\0';
-
- args[0]=(unsigned int)service;
- args[1]=1;
- args[2]=1;
- args[3]=(unsigned int)name;
-
- if (openfirmware(args) == -1)
- return -1;
- return args[4];
-}
-
-int
-OF_getproplen(ofw_handle_t openfirmware, int handle, char *prop)
-{
- unsigned int args[8];
- char service[12];
-
- service[0]='g';
- service[1]='e';
- service[2]='t';
- service[3]='p';
- service[4]='r';
- service[5]='o';
- service[6]='p';
- service[7]='l';
- service[8]='e';
- service[9]='n';
- service[10]='\0';
-
- args[0] = (unsigned int)service;
- args[1] = 2;
- args[2] = 1;
- args[3] = (unsigned int)handle;
- args[4] = (unsigned int)prop;
-
- if (openfirmware(args) == -1)
- return -1;
- return args[5];
-}
-
-int
-OF_getprop(ofw_handle_t openfirmware, int handle, char *prop, void *buf, unsigned int buflen)
-{
- unsigned int args[8];
- char service[8];
-
- service[0]='g';
- service[1]='e';
- service[2]='t';
- service[3]='p';
- service[4]='r';
- service[5]='o';
- service[6]='p';
- service[7]='\0';
-
- args[0] = (unsigned int)service;
- args[1] = 4;
- args[2] = 1;
- args[3] = (unsigned int)handle;
- args[4] = (unsigned int)prop;
- args[5] = (unsigned int)buf;
- args[6] = buflen;
-
- if (openfirmware(args) == -1)
- return -1;
- return args[7];
-}
-
-asmlinkage void ofw_init(ofw_handle_t o, int *nomr, int *pointer)
-{
- int phandle,i,mem_len,buffer[32];
- char temp[15];
-
- temp[0]='/';
- temp[1]='m';
- temp[2]='e';
- temp[3]='m';
- temp[4]='o';
- temp[5]='r';
- temp[6]='y';
- temp[7]='\0';
-
- phandle=OF_finddevice(o,temp);
-
- temp[0]='r';
- temp[1]='e';
- temp[2]='g';
- temp[3]='\0';
-
- mem_len = OF_getproplen(o,phandle, temp);
- OF_getprop(o,phandle, temp, buffer, mem_len);
- *nomr=mem_len >> 3;
-
- for (i=0; i<=mem_len/4; i++) pointer[i]=of_decode_int((const unsigned char *)&buffer[i]);
-
- temp[0]='/';
- temp[1]='c';
- temp[2]='h';
- temp[3]='o';
- temp[4]='s';
- temp[5]='e';
- temp[6]='n';
- temp[7]='\0';
-
- phandle=OF_finddevice(o,temp);
-
- temp[0]='b';
- temp[1]='o';
- temp[2]='o';
- temp[3]='t';
- temp[4]='a';
- temp[5]='r';
- temp[6]='g';
- temp[7]='s';
- temp[8]='\0';
-
- mem_len = OF_getproplen(o,phandle, temp);
- OF_getprop(o,phandle, temp, buffer, mem_len);
- if (mem_len > 128) mem_len=128;
- for (i=0; i<=mem_len/4; i++) pointer[i+33]=buffer[i];
- pointer[i+33]=0;
-
- temp[0]='/';
- temp[1]='\0';
- phandle=OF_finddevice(o,temp);
- temp[0]='b';
- temp[1]='a';
- temp[2]='n';
- temp[3]='n';
- temp[4]='e';
- temp[5]='r';
- temp[6]='-';
- temp[7]='n';
- temp[8]='a';
- temp[9]='m';
- temp[10]='e';
- temp[11]='\0';
- mem_len = OF_getproplen(o,phandle, temp);
- OF_getprop(o,phandle, temp, buffer, mem_len);
- * ((unsigned char *) &pointer[32]) = ((unsigned char *) buffer)[mem_len-2];
-}
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 802720e..c485157 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -103,8 +103,8 @@
kirkwood-ts219-6282.dtb \
kirkwood-openblocks_a6.dtb
dtb-$(CONFIG_ARCH_MARCO) += marco-evb.dtb
-dtb-$(CONFIG_ARCH_MSM) += msm8660-surf.dtb \
- msm8960-cdp.dtb
+dtb-$(CONFIG_ARCH_MSM) += qcom-msm8660-surf.dtb \
+ qcom-msm8960-cdp.dtb
dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \
armada-370-mirabox.dtb \
armada-370-netgear-rn102.dtb \
diff --git a/arch/arm/boot/dts/at91sam9g25.dtsi b/arch/arm/boot/dts/at91sam9g25.dtsi
index b4ec6fe..17b8799 100644
--- a/arch/arm/boot/dts/at91sam9g25.dtsi
+++ b/arch/arm/boot/dts/at91sam9g25.dtsi
@@ -7,6 +7,8 @@
*/
#include "at91sam9x5.dtsi"
+#include "at91sam9x5_usart3.dtsi"
+#include "at91sam9x5_macb0.dtsi"
/ {
model = "Atmel AT91SAM9G25 SoC";
diff --git a/arch/arm/boot/dts/at91sam9g35.dtsi b/arch/arm/boot/dts/at91sam9g35.dtsi
index bebf9f5..e35c2fc 100644
--- a/arch/arm/boot/dts/at91sam9g35.dtsi
+++ b/arch/arm/boot/dts/at91sam9g35.dtsi
@@ -7,6 +7,7 @@
*/
#include "at91sam9x5.dtsi"
+#include "at91sam9x5_macb0.dtsi"
/ {
model = "Atmel AT91SAM9G35 SoC";
diff --git a/arch/arm/boot/dts/at91sam9x25.dtsi b/arch/arm/boot/dts/at91sam9x25.dtsi
index 49e94ab..c255421 100644
--- a/arch/arm/boot/dts/at91sam9x25.dtsi
+++ b/arch/arm/boot/dts/at91sam9x25.dtsi
@@ -7,6 +7,9 @@
*/
#include "at91sam9x5.dtsi"
+#include "at91sam9x5_usart3.dtsi"
+#include "at91sam9x5_macb0.dtsi"
+#include "at91sam9x5_macb1.dtsi"
/ {
model = "Atmel AT91SAM9X25 SoC";
@@ -22,27 +25,6 @@
0x80000000 0xfffd0000 0xb83fffff /* pioC */
0x003fffff 0x003f8000 0x00000000 /* pioD */
>;
-
- macb1 {
- pinctrl_macb1_rmii: macb1_rmii-0 {
- atmel,pins =
- <AT91_PIOC 16 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC16 periph B */
- AT91_PIOC 18 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC18 periph B */
- AT91_PIOC 19 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC19 periph B */
- AT91_PIOC 20 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC20 periph B */
- AT91_PIOC 21 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC21 periph B */
- AT91_PIOC 27 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC27 periph B */
- AT91_PIOC 28 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC28 periph B */
- AT91_PIOC 29 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC29 periph B */
- AT91_PIOC 30 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC30 periph B */
- AT91_PIOC 31 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC31 periph B */
- };
- };
- };
-
- macb1: ethernet@f8030000 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_macb1_rmii>;
};
};
};
diff --git a/arch/arm/boot/dts/at91sam9x35.dtsi b/arch/arm/boot/dts/at91sam9x35.dtsi
index 1a3d525..8eac66c 100644
--- a/arch/arm/boot/dts/at91sam9x35.dtsi
+++ b/arch/arm/boot/dts/at91sam9x35.dtsi
@@ -7,6 +7,7 @@
*/
#include "at91sam9x5.dtsi"
+#include "at91sam9x5_macb0.dtsi"
/ {
model = "Atmel AT91SAM9X35 SoC";
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index e74dc15..40267a1 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -206,29 +206,6 @@
};
};
- usart3 {
- pinctrl_usart3: usart3-0 {
- atmel,pins =
- <AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PC22 periph B with pullup */
- AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC23 periph B */
- };
-
- pinctrl_usart3_rts: usart3_rts-0 {
- atmel,pins =
- <AT91_PIOC 24 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC24 periph B */
- };
-
- pinctrl_usart3_cts: usart3_cts-0 {
- atmel,pins =
- <AT91_PIOC 25 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC25 periph B */
- };
-
- pinctrl_usart3_sck: usart3_sck-0 {
- atmel,pins =
- <AT91_PIOC 26 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC26 periph B */
- };
- };
-
uart0 {
pinctrl_uart0: uart0-0 {
atmel,pins =
@@ -277,34 +254,6 @@
};
};
- macb0 {
- pinctrl_macb0_rmii: macb0_rmii-0 {
- atmel,pins =
- <AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB0 periph A */
- AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB1 periph A */
- AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB2 periph A */
- AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB3 periph A */
- AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB4 periph A */
- AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB5 periph A */
- AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB6 periph A */
- AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB7 periph A */
- AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB9 periph A */
- AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB10 periph A */
- };
-
- pinctrl_macb0_rmii_mii: macb0_rmii_mii-0 {
- atmel,pins =
- <AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB8 periph A */
- AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB11 periph A */
- AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB12 periph A */
- AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB13 periph A */
- AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB14 periph A */
- AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB15 periph A */
- AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB16 periph A */
- AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB17 periph A */
- };
- };
-
mmc0 {
pinctrl_mmc0_slot0_clk_cmd_dat0: mmc0_slot0_clk_cmd_dat0-0 {
atmel,pins =
@@ -610,22 +559,6 @@
status = "disabled";
};
- macb0: ethernet@f802c000 {
- compatible = "cdns,at32ap7000-macb", "cdns,macb";
- reg = <0xf802c000 0x100>;
- interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_macb0_rmii>;
- status = "disabled";
- };
-
- macb1: ethernet@f8030000 {
- compatible = "cdns,at32ap7000-macb", "cdns,macb";
- reg = <0xf8030000 0x100>;
- interrupts = <27 IRQ_TYPE_LEVEL_HIGH 3>;
- status = "disabled";
- };
-
i2c0: i2c@f8010000 {
compatible = "atmel,at91sam9x5-i2c";
reg = <0xf8010000 0x100>;
diff --git a/arch/arm/boot/dts/at91sam9x5_macb0.dtsi b/arch/arm/boot/dts/at91sam9x5_macb0.dtsi
new file mode 100644
index 0000000..55731ff
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9x5_macb0.dtsi
@@ -0,0 +1,56 @@
+/*
+ * at91sam9x5_macb0.dtsi - Device Tree Include file for AT91SAM9x5 SoC with 1
+ * Ethernet interface.
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ ahb {
+ apb {
+ pinctrl@fffff400 {
+ macb0 {
+ pinctrl_macb0_rmii: macb0_rmii-0 {
+ atmel,pins =
+ <AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB0 periph A */
+ AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB1 periph A */
+ AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB2 periph A */
+ AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB3 periph A */
+ AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB4 periph A */
+ AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB5 periph A */
+ AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB6 periph A */
+ AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB7 periph A */
+ AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB9 periph A */
+ AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB10 periph A */
+ };
+
+ pinctrl_macb0_rmii_mii: macb0_rmii_mii-0 {
+ atmel,pins =
+ <AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB8 periph A */
+ AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB11 periph A */
+ AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB12 periph A */
+ AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB13 periph A */
+ AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB14 periph A */
+ AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB15 periph A */
+ AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB16 periph A */
+ AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB17 periph A */
+ };
+ };
+ };
+
+ macb0: ethernet@f802c000 {
+ compatible = "cdns,at32ap7000-macb", "cdns,macb";
+ reg = <0xf802c000 0x100>;
+ interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_macb0_rmii>;
+ status = "disabled";
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/at91sam9x5_macb1.dtsi b/arch/arm/boot/dts/at91sam9x5_macb1.dtsi
new file mode 100644
index 0000000..77425a6
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9x5_macb1.dtsi
@@ -0,0 +1,44 @@
+/*
+ * at91sam9x5_macb1.dtsi - Device Tree Include file for AT91SAM9x5 SoC with 2
+ * Ethernet interfaces.
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ ahb {
+ apb {
+ pinctrl@fffff400 {
+ macb1 {
+ pinctrl_macb1_rmii: macb1_rmii-0 {
+ atmel,pins =
+ <AT91_PIOC 16 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC16 periph B */
+ AT91_PIOC 18 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC18 periph B */
+ AT91_PIOC 19 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC19 periph B */
+ AT91_PIOC 20 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC20 periph B */
+ AT91_PIOC 21 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC21 periph B */
+ AT91_PIOC 27 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC27 periph B */
+ AT91_PIOC 28 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC28 periph B */
+ AT91_PIOC 29 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC29 periph B */
+ AT91_PIOC 30 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC30 periph B */
+ AT91_PIOC 31 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC31 periph B */
+ };
+ };
+ };
+
+ macb1: ethernet@f8030000 {
+ compatible = "cdns,at32ap7000-macb", "cdns,macb";
+ reg = <0xf8030000 0x100>;
+ interrupts = <27 IRQ_TYPE_LEVEL_HIGH 3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_macb1_rmii>;
+ status = "disabled";
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/at91sam9x5_usart3.dtsi b/arch/arm/boot/dts/at91sam9x5_usart3.dtsi
new file mode 100644
index 0000000..2347e95
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9x5_usart3.dtsi
@@ -0,0 +1,51 @@
+/*
+ * at91sam9x5_usart3.dtsi - Device Tree Include file for AT91SAM9x5 SoC with
+ * 4 USART.
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ ahb {
+ apb {
+ pinctrl@fffff400 {
+ usart3 {
+ pinctrl_usart3: usart3-0 {
+ atmel,pins =
+ <AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PC22 periph B with pullup */
+ AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC23 periph B */
+ };
+
+ pinctrl_usart3_rts: usart3_rts-0 {
+ atmel,pins =
+ <AT91_PIOC 24 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC24 periph B */
+ };
+
+ pinctrl_usart3_cts: usart3_cts-0 {
+ atmel,pins =
+ <AT91_PIOC 25 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC25 periph B */
+ };
+
+ pinctrl_usart3_sck: usart3_sck-0 {
+ atmel,pins =
+ <AT91_PIOC 26 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC26 periph B */
+ };
+ };
+ };
+
+ usart3: serial@f8028000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xf8028000 0x200>;
+ interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usart3>;
+ status = "disabled";
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/msm8660-surf.dts b/arch/arm/boot/dts/qcom-msm8660-surf.dts
similarity index 100%
rename from arch/arm/boot/dts/msm8660-surf.dts
rename to arch/arm/boot/dts/qcom-msm8660-surf.dts
diff --git a/arch/arm/boot/dts/msm8960-cdp.dts b/arch/arm/boot/dts/qcom-msm8960-cdp.dts
similarity index 100%
rename from arch/arm/boot/dts/msm8960-cdp.dts
rename to arch/arm/boot/dts/qcom-msm8960-cdp.dts
diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi
index b7f4961..5cdaba4 100644
--- a/arch/arm/boot/dts/sama5d3.dtsi
+++ b/arch/arm/boot/dts/sama5d3.dtsi
@@ -31,7 +31,6 @@
gpio3 = &pioD;
gpio4 = &pioE;
tcb0 = &tcb0;
- tcb1 = &tcb1;
i2c0 = &i2c0;
i2c1 = &i2c1;
i2c2 = &i2c2;
@@ -105,15 +104,6 @@
status = "disabled";
};
- can0: can@f000c000 {
- compatible = "atmel,at91sam9x5-can";
- reg = <0xf000c000 0x300>;
- interrupts = <40 IRQ_TYPE_LEVEL_HIGH 3>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_can0_rx_tx>;
- status = "disabled";
- };
-
tcb0: timer@f0010000 {
compatible = "atmel,at91sam9x5-tcb";
reg = <0xf0010000 0x100>;
@@ -166,15 +156,6 @@
status = "disabled";
};
- macb0: ethernet@f0028000 {
- compatible = "cdns,pc302-gem", "cdns,gem";
- reg = <0xf0028000 0x100>;
- interrupts = <34 IRQ_TYPE_LEVEL_HIGH 3>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_macb0_data_rgmii &pinctrl_macb0_signal_rgmii>;
- status = "disabled";
- };
-
isi: isi@f0034000 {
compatible = "atmel,at91sam9g45-isi";
reg = <0xf0034000 0x4000>;
@@ -195,19 +176,6 @@
#size-cells = <0>;
};
- mmc2: mmc@f8004000 {
- compatible = "atmel,hsmci";
- reg = <0xf8004000 0x600>;
- interrupts = <23 IRQ_TYPE_LEVEL_HIGH 0>;
- dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(1)>;
- dma-names = "rxtx";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_mmc2_clk_cmd_dat0 &pinctrl_mmc2_dat1_3>;
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
spi1: spi@f8008000 {
#address-cells = <1>;
#size-cells = <0>;
@@ -231,20 +199,6 @@
status = "disabled";
};
- can1: can@f8010000 {
- compatible = "atmel,at91sam9x5-can";
- reg = <0xf8010000 0x300>;
- interrupts = <41 IRQ_TYPE_LEVEL_HIGH 3>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_can1_rx_tx>;
- };
-
- tcb1: timer@f8014000 {
- compatible = "atmel,at91sam9x5-tcb";
- reg = <0xf8014000 0x100>;
- interrupts = <27 IRQ_TYPE_LEVEL_HIGH 0>;
- };
-
adc0: adc@f8018000 {
compatible = "atmel,at91sam9260-adc";
reg = <0xf8018000 0x100>;
@@ -341,15 +295,6 @@
status = "disabled";
};
- macb1: ethernet@f802c000 {
- compatible = "cdns,at32ap7000-macb", "cdns,macb";
- reg = <0xf802c000 0x100>;
- interrupts = <35 IRQ_TYPE_LEVEL_HIGH 3>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_macb1_rmii>;
- status = "disabled";
- };
-
sha@f8034000 {
compatible = "atmel,sam9g46-sha";
reg = <0xf8034000 0x100>;
@@ -474,22 +419,6 @@
};
};
- can0 {
- pinctrl_can0_rx_tx: can0_rx_tx {
- atmel,pins =
- <AT91_PIOD 14 AT91_PERIPH_C AT91_PINCTRL_NONE /* PD14 periph C RX, conflicts with SCK0, SPI0_NPCS1 */
- AT91_PIOD 15 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PD15 periph C TX, conflicts with CTS0, SPI0_NPCS2 */
- };
- };
-
- can1 {
- pinctrl_can1_rx_tx: can1_rx_tx {
- atmel,pins =
- <AT91_PIOB 14 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB14 periph B RX, conflicts with GCRS */
- AT91_PIOB 15 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB15 periph B TX, conflicts with GCOL */
- };
- };
-
dbgu {
pinctrl_dbgu: dbgu-0 {
atmel,pins =
@@ -537,107 +466,6 @@
};
};
- lcd {
- pinctrl_lcd: lcd-0 {
- atmel,pins =
- <AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA24 periph A LCDPWM */
- AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA26 periph A LCDVSYNC */
- AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA27 periph A LCDHSYNC */
- AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA25 periph A LCDDISP */
- AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA29 periph A LCDDEN */
- AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA28 periph A LCDPCK */
- AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA0 periph A LCDD0 pin */
- AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA1 periph A LCDD1 pin */
- AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA2 periph A LCDD2 pin */
- AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA3 periph A LCDD3 pin */
- AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA4 periph A LCDD4 pin */
- AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA5 periph A LCDD5 pin */
- AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA6 periph A LCDD6 pin */
- AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA7 periph A LCDD7 pin */
- AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA8 periph A LCDD8 pin */
- AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA9 periph A LCDD9 pin */
- AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA10 periph A LCDD10 pin */
- AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA11 periph A LCDD11 pin */
- AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA12 periph A LCDD12 pin */
- AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA13 periph A LCDD13 pin */
- AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA14 periph A LCDD14 pin */
- AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA15 periph A LCDD15 pin */
- AT91_PIOC 14 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC14 periph C LCDD16 pin */
- AT91_PIOC 13 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC13 periph C LCDD17 pin */
- AT91_PIOC 12 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC12 periph C LCDD18 pin */
- AT91_PIOC 11 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC11 periph C LCDD19 pin */
- AT91_PIOC 10 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC10 periph C LCDD20 pin */
- AT91_PIOC 15 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC15 periph C LCDD21 pin */
- AT91_PIOE 27 AT91_PERIPH_C AT91_PINCTRL_NONE /* PE27 periph C LCDD22 pin */
- AT91_PIOE 28 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PE28 periph C LCDD23 pin */
- };
- };
-
- macb0 {
- pinctrl_macb0_data_rgmii: macb0_data_rgmii {
- atmel,pins =
- <AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB0 periph A GTX0, conflicts with PWMH0 */
- AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB1 periph A GTX1, conflicts with PWML0 */
- AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB2 periph A GTX2, conflicts with TK1 */
- AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB3 periph A GTX3, conflicts with TF1 */
- AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB4 periph A GRX0, conflicts with PWMH1 */
- AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB5 periph A GRX1, conflicts with PWML1 */
- AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB6 periph A GRX2, conflicts with TD1 */
- AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB7 periph A GRX3, conflicts with RK1 */
- };
- pinctrl_macb0_data_gmii: macb0_data_gmii {
- atmel,pins =
- <AT91_PIOB 19 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB19 periph B GTX4, conflicts with MCI1_CDA */
- AT91_PIOB 20 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB20 periph B GTX5, conflicts with MCI1_DA0 */
- AT91_PIOB 21 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB21 periph B GTX6, conflicts with MCI1_DA1 */
- AT91_PIOB 22 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB22 periph B GTX7, conflicts with MCI1_DA2 */
- AT91_PIOB 23 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB23 periph B GRX4, conflicts with MCI1_DA3 */
- AT91_PIOB 24 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB24 periph B GRX5, conflicts with MCI1_CK */
- AT91_PIOB 25 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB25 periph B GRX6, conflicts with SCK1 */
- AT91_PIOB 26 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB26 periph B GRX7, conflicts with CTS1 */
- };
- pinctrl_macb0_signal_rgmii: macb0_signal_rgmii {
- atmel,pins =
- <AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB8 periph A GTXCK, conflicts with PWMH2 */
- AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB9 periph A GTXEN, conflicts with PWML2 */
- AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB11 periph A GRXCK, conflicts with RD1 */
- AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB13 periph A GRXER, conflicts with PWML3 */
- AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB16 periph A GMDC */
- AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB17 periph A GMDIO */
- AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB18 periph A G125CK */
- };
- pinctrl_macb0_signal_gmii: macb0_signal_gmii {
- atmel,pins =
- <AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB9 periph A GTXEN, conflicts with PWML2 */
- AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB10 periph A GTXER, conflicts with RF1 */
- AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB11 periph A GRXCK, conflicts with RD1 */
- AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB12 periph A GRXDV, conflicts with PWMH3 */
- AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB13 periph A GRXER, conflicts with PWML3 */
- AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB14 periph A GCRS, conflicts with CANRX1 */
- AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB15 periph A GCOL, conflicts with CANTX1 */
- AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB16 periph A GMDC */
- AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB17 periph A GMDIO */
- AT91_PIOB 27 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB27 periph B G125CKO */
- };
-
- };
-
- macb1 {
- pinctrl_macb1_rmii: macb1_rmii-0 {
- atmel,pins =
- <AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC0 periph A ETX0, conflicts with TIOA3 */
- AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC1 periph A ETX1, conflicts with TIOB3 */
- AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC2 periph A ERX0, conflicts with TCLK3 */
- AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC3 periph A ERX1, conflicts with TIOA4 */
- AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC4 periph A ETXEN, conflicts with TIOB4 */
- AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC5 periph A ECRSDV,conflicts with TCLK4 */
- AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC6 periph A ERXER, conflicts with TIOA5 */
- AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC7 periph A EREFCK, conflicts with TIOB5 */
- AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC8 periph A EMDC, conflicts with TCLK5 */
- AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PC9 periph A EMDIO */
- };
- };
-
mmc0 {
pinctrl_mmc0_clk_cmd_dat0: mmc0_clk_cmd_dat0 {
atmel,pins =
@@ -675,21 +503,6 @@
};
};
- mmc2 {
- pinctrl_mmc2_clk_cmd_dat0: mmc2_clk_cmd_dat0 {
- atmel,pins =
- <AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC15 periph A MCI2_CK, conflicts with PCK2 */
- AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PC10 periph A MCI2_CDA with pullup */
- AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PC11 periph A MCI2_DA0 with pullup */
- };
- pinctrl_mmc2_dat1_3: mmc2_dat1_3 {
- atmel,pins =
- <AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC12 periph A MCI2_DA1 with pullup, conflicts with TIOA1 */
- AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC13 periph A MCI2_DA2 with pullup, conflicts with TIOB1 */
- AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PC14 periph A MCI2_DA3 with pullup, conflicts with TCLK1 */
- };
- };
-
nand0 {
pinctrl_nand0_ale_cle: nand0_ale_cle-0 {
atmel,pins =
@@ -748,22 +561,6 @@
};
};
- uart0 {
- pinctrl_uart0: uart0-0 {
- atmel,pins =
- <AT91_PIOC 29 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC29 periph A, conflicts with PWMFI2, ISI_D8 */
- AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PC30 periph A with pullup, conflicts with ISI_PCK */
- };
- };
-
- uart1 {
- pinctrl_uart1: uart1-0 {
- atmel,pins =
- <AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA30 periph B, conflicts with TWD0, ISI_VSYNC */
- AT91_PIOA 31 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; /* PA31 periph B with pullup, conflicts with TWCK0, ISI_HSYNC */
- };
- };
-
usart0 {
pinctrl_usart0: usart0-0 {
atmel,pins =
diff --git a/arch/arm/boot/dts/sama5d31.dtsi b/arch/arm/boot/dts/sama5d31.dtsi
new file mode 100644
index 0000000..7997dc9
--- /dev/null
+++ b/arch/arm/boot/dts/sama5d31.dtsi
@@ -0,0 +1,16 @@
+/*
+ * sama5d31.dtsi - Device Tree Include file for SAMA5D31 SoC
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+#include "sama5d3.dtsi"
+#include "sama5d3_lcd.dtsi"
+#include "sama5d3_emac.dtsi"
+#include "sama5d3_mci2.dtsi"
+#include "sama5d3_uart.dtsi"
+
+/ {
+ compatible = "atmel,samad31", "atmel,sama5d3", "atmel,sama5";
+};
diff --git a/arch/arm/boot/dts/sama5d31ek.dts b/arch/arm/boot/dts/sama5d31ek.dts
index 027bac7..04eec0d 100644
--- a/arch/arm/boot/dts/sama5d31ek.dts
+++ b/arch/arm/boot/dts/sama5d31ek.dts
@@ -7,12 +7,13 @@
* Licensed under GPLv2 or later.
*/
/dts-v1/;
+#include "sama5d31.dtsi"
#include "sama5d3xmb.dtsi"
#include "sama5d3xdm.dtsi"
/ {
model = "Atmel SAMA5D31-EK";
- compatible = "atmel,sama5d31ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5";
+ compatible = "atmel,sama5d31ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
ahb {
apb {
diff --git a/arch/arm/boot/dts/sama5d33.dtsi b/arch/arm/boot/dts/sama5d33.dtsi
new file mode 100644
index 0000000..39f8322
--- /dev/null
+++ b/arch/arm/boot/dts/sama5d33.dtsi
@@ -0,0 +1,14 @@
+/*
+ * sama5d33.dtsi - Device Tree Include file for SAMA5D33 SoC
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+#include "sama5d3.dtsi"
+#include "sama5d3_lcd.dtsi"
+#include "sama5d3_gmac.dtsi"
+
+/ {
+ compatible = "atmel,samad33", "atmel,sama5d3", "atmel,sama5";
+};
diff --git a/arch/arm/boot/dts/sama5d33ek.dts b/arch/arm/boot/dts/sama5d33ek.dts
index 99bd0c8..cbd6a3f 100644
--- a/arch/arm/boot/dts/sama5d33ek.dts
+++ b/arch/arm/boot/dts/sama5d33ek.dts
@@ -7,12 +7,13 @@
* Licensed under GPLv2 or later.
*/
/dts-v1/;
+#include "sama5d33.dtsi"
#include "sama5d3xmb.dtsi"
#include "sama5d3xdm.dtsi"
/ {
model = "Atmel SAMA5D33-EK";
- compatible = "atmel,sama5d33ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5";
+ compatible = "atmel,sama5d33ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d33", "atmel,sama5d3", "atmel,sama5";
ahb {
apb {
diff --git a/arch/arm/boot/dts/sama5d34.dtsi b/arch/arm/boot/dts/sama5d34.dtsi
new file mode 100644
index 0000000..89cda2c
--- /dev/null
+++ b/arch/arm/boot/dts/sama5d34.dtsi
@@ -0,0 +1,16 @@
+/*
+ * sama5d34.dtsi - Device Tree Include file for SAMA5D34 SoC
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+#include "sama5d3.dtsi"
+#include "sama5d3_lcd.dtsi"
+#include "sama5d3_gmac.dtsi"
+#include "sama5d3_can.dtsi"
+#include "sama5d3_mci2.dtsi"
+
+/ {
+ compatible = "atmel,samad34", "atmel,sama5d3", "atmel,sama5";
+};
diff --git a/arch/arm/boot/dts/sama5d34ek.dts b/arch/arm/boot/dts/sama5d34ek.dts
index fb8ee11..878aa16 100644
--- a/arch/arm/boot/dts/sama5d34ek.dts
+++ b/arch/arm/boot/dts/sama5d34ek.dts
@@ -7,12 +7,13 @@
* Licensed under GPLv2 or later.
*/
/dts-v1/;
+#include "sama5d34.dtsi"
#include "sama5d3xmb.dtsi"
#include "sama5d3xdm.dtsi"
/ {
model = "Atmel SAMA5D34-EK";
- compatible = "atmel,sama5d34ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5";
+ compatible = "atmel,sama5d34ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d34", "atmel,sama5d3", "atmel,sama5";
ahb {
apb {
diff --git a/arch/arm/boot/dts/sama5d35.dtsi b/arch/arm/boot/dts/sama5d35.dtsi
new file mode 100644
index 0000000..d20cd71
--- /dev/null
+++ b/arch/arm/boot/dts/sama5d35.dtsi
@@ -0,0 +1,18 @@
+/*
+ * sama5d35.dtsi - Device Tree Include file for SAMA5D35 SoC
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+#include "sama5d3.dtsi"
+#include "sama5d3_gmac.dtsi"
+#include "sama5d3_emac.dtsi"
+#include "sama5d3_can.dtsi"
+#include "sama5d3_mci2.dtsi"
+#include "sama5d3_uart.dtsi"
+#include "sama5d3_tcb1.dtsi"
+
+/ {
+ compatible = "atmel,samad35", "atmel,sama5d3", "atmel,sama5";
+};
diff --git a/arch/arm/boot/dts/sama5d35ek.dts b/arch/arm/boot/dts/sama5d35ek.dts
index 509a53d..9089c7c 100644
--- a/arch/arm/boot/dts/sama5d35ek.dts
+++ b/arch/arm/boot/dts/sama5d35ek.dts
@@ -7,11 +7,12 @@
* Licensed under GPLv2 or later.
*/
/dts-v1/;
+#include "sama5d35.dtsi"
#include "sama5d3xmb.dtsi"
/ {
model = "Atmel SAMA5D35-EK";
- compatible = "atmel,sama5d35ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5";
+ compatible = "atmel,sama5d35ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d35", "atmel,sama5d3", "atmel,sama5";
ahb {
apb {
diff --git a/arch/arm/boot/dts/sama5d3_can.dtsi b/arch/arm/boot/dts/sama5d3_can.dtsi
new file mode 100644
index 0000000..8ed3260
--- /dev/null
+++ b/arch/arm/boot/dts/sama5d3_can.dtsi
@@ -0,0 +1,54 @@
+/*
+ * at91sama5d3_can.dtsi - Device Tree Include file for AT91SAM9x5 SoC with
+ * CAN support
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ ahb {
+ apb {
+ pinctrl@fffff200 {
+ can0 {
+ pinctrl_can0_rx_tx: can0_rx_tx {
+ atmel,pins =
+ <AT91_PIOD 14 AT91_PERIPH_C AT91_PINCTRL_NONE /* PD14 periph C RX, conflicts with SCK0, SPI0_NPCS1 */
+ AT91_PIOD 15 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PD15 periph C TX, conflicts with CTS0, SPI0_NPCS2 */
+ };
+ };
+
+ can1 {
+ pinctrl_can1_rx_tx: can1_rx_tx {
+ atmel,pins =
+ <AT91_PIOB 14 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB14 periph B RX, conflicts with GCRS */
+ AT91_PIOB 15 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB15 periph B TX, conflicts with GCOL */
+ };
+ };
+
+ };
+
+ can0: can@f000c000 {
+ compatible = "atmel,at91sam9x5-can";
+ reg = <0xf000c000 0x300>;
+ interrupts = <40 IRQ_TYPE_LEVEL_HIGH 3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can0_rx_tx>;
+ status = "disabled";
+ };
+
+ can1: can@f8010000 {
+ compatible = "atmel,at91sam9x5-can";
+ reg = <0xf8010000 0x300>;
+ interrupts = <41 IRQ_TYPE_LEVEL_HIGH 3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can1_rx_tx>;
+ status = "disabled";
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/sama5d3_emac.dtsi b/arch/arm/boot/dts/sama5d3_emac.dtsi
new file mode 100644
index 0000000..4d4f351
--- /dev/null
+++ b/arch/arm/boot/dts/sama5d3_emac.dtsi
@@ -0,0 +1,44 @@
+/*
+ * at91sama5d3_emac.dtsi - Device Tree Include file for AT91SAM9x5 SoC with
+ * Ethernet.
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ ahb {
+ apb {
+ pinctrl@fffff200 {
+ macb1 {
+ pinctrl_macb1_rmii: macb1_rmii-0 {
+ atmel,pins =
+ <AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC0 periph A ETX0, conflicts with TIOA3 */
+ AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC1 periph A ETX1, conflicts with TIOB3 */
+ AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC2 periph A ERX0, conflicts with TCLK3 */
+ AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC3 periph A ERX1, conflicts with TIOA4 */
+ AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC4 periph A ETXEN, conflicts with TIOB4 */
+ AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC5 periph A ECRSDV,conflicts with TCLK4 */
+ AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC6 periph A ERXER, conflicts with TIOA5 */
+ AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC7 periph A EREFCK, conflicts with TIOB5 */
+ AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC8 periph A EMDC, conflicts with TCLK5 */
+ AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PC9 periph A EMDIO */
+ };
+ };
+ };
+
+ macb1: ethernet@f802c000 {
+ compatible = "cdns,at32ap7000-macb", "cdns,macb";
+ reg = <0xf802c000 0x100>;
+ interrupts = <35 IRQ_TYPE_LEVEL_HIGH 3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_macb1_rmii>;
+ status = "disabled";
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/sama5d3_gmac.dtsi b/arch/arm/boot/dts/sama5d3_gmac.dtsi
new file mode 100644
index 0000000..0ba8be3
--- /dev/null
+++ b/arch/arm/boot/dts/sama5d3_gmac.dtsi
@@ -0,0 +1,77 @@
+/*
+ * at91sama5d3_gmac.dtsi - Device Tree Include file for AT91SAM9x5 SoC with
+ * Gigabit Ethernet.
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ ahb {
+ apb {
+ pinctrl@fffff200 {
+ macb0 {
+ pinctrl_macb0_data_rgmii: macb0_data_rgmii {
+ atmel,pins =
+ <AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB0 periph A GTX0, conflicts with PWMH0 */
+ AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB1 periph A GTX1, conflicts with PWML0 */
+ AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB2 periph A GTX2, conflicts with TK1 */
+ AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB3 periph A GTX3, conflicts with TF1 */
+ AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB4 periph A GRX0, conflicts with PWMH1 */
+ AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB5 periph A GRX1, conflicts with PWML1 */
+ AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB6 periph A GRX2, conflicts with TD1 */
+ AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB7 periph A GRX3, conflicts with RK1 */
+ };
+ pinctrl_macb0_data_gmii: macb0_data_gmii {
+ atmel,pins =
+ <AT91_PIOB 19 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB19 periph B GTX4, conflicts with MCI1_CDA */
+ AT91_PIOB 20 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB20 periph B GTX5, conflicts with MCI1_DA0 */
+ AT91_PIOB 21 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB21 periph B GTX6, conflicts with MCI1_DA1 */
+ AT91_PIOB 22 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB22 periph B GTX7, conflicts with MCI1_DA2 */
+ AT91_PIOB 23 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB23 periph B GRX4, conflicts with MCI1_DA3 */
+ AT91_PIOB 24 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB24 periph B GRX5, conflicts with MCI1_CK */
+ AT91_PIOB 25 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB25 periph B GRX6, conflicts with SCK1 */
+ AT91_PIOB 26 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB26 periph B GRX7, conflicts with CTS1 */
+ };
+ pinctrl_macb0_signal_rgmii: macb0_signal_rgmii {
+ atmel,pins =
+ <AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB8 periph A GTXCK, conflicts with PWMH2 */
+ AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB9 periph A GTXEN, conflicts with PWML2 */
+ AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB11 periph A GRXCK, conflicts with RD1 */
+ AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB13 periph A GRXER, conflicts with PWML3 */
+ AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB16 periph A GMDC */
+ AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB17 periph A GMDIO */
+ AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB18 periph A G125CK */
+ };
+ pinctrl_macb0_signal_gmii: macb0_signal_gmii {
+ atmel,pins =
+ <AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB9 periph A GTXEN, conflicts with PWML2 */
+ AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB10 periph A GTXER, conflicts with RF1 */
+ AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB11 periph A GRXCK, conflicts with RD1 */
+ AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB12 periph A GRXDV, conflicts with PWMH3 */
+ AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB13 periph A GRXER, conflicts with PWML3 */
+ AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB14 periph A GCRS, conflicts with CANRX1 */
+ AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB15 periph A GCOL, conflicts with CANTX1 */
+ AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB16 periph A GMDC */
+ AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB17 periph A GMDIO */
+ AT91_PIOB 27 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB27 periph B G125CKO */
+ };
+
+ };
+ };
+
+ macb0: ethernet@f0028000 {
+ compatible = "cdns,pc302-gem", "cdns,gem";
+ reg = <0xf0028000 0x100>;
+ interrupts = <34 IRQ_TYPE_LEVEL_HIGH 3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_macb0_data_rgmii &pinctrl_macb0_signal_rgmii>;
+ status = "disabled";
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/sama5d3_lcd.dtsi b/arch/arm/boot/dts/sama5d3_lcd.dtsi
new file mode 100644
index 0000000..01f52a7
--- /dev/null
+++ b/arch/arm/boot/dts/sama5d3_lcd.dtsi
@@ -0,0 +1,55 @@
+/*
+ * at91sama5d3_lcd.dtsi - Device Tree Include file for AT91SAM9x5 SoC with
+ * LCD support
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ ahb {
+ apb {
+ pinctrl@fffff200 {
+ lcd {
+ pinctrl_lcd: lcd-0 {
+ atmel,pins =
+ <AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA24 periph A LCDPWM */
+ AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA26 periph A LCDVSYNC */
+ AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA27 periph A LCDHSYNC */
+ AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA25 periph A LCDDISP */
+ AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA29 periph A LCDDEN */
+ AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA28 periph A LCDPCK */
+ AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA0 periph A LCDD0 pin */
+ AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA1 periph A LCDD1 pin */
+ AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA2 periph A LCDD2 pin */
+ AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA3 periph A LCDD3 pin */
+ AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA4 periph A LCDD4 pin */
+ AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA5 periph A LCDD5 pin */
+ AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA6 periph A LCDD6 pin */
+ AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA7 periph A LCDD7 pin */
+ AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA8 periph A LCDD8 pin */
+ AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA9 periph A LCDD9 pin */
+ AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA10 periph A LCDD10 pin */
+ AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA11 periph A LCDD11 pin */
+ AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA12 periph A LCDD12 pin */
+ AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA13 periph A LCDD13 pin */
+ AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA14 periph A LCDD14 pin */
+ AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA15 periph A LCDD15 pin */
+ AT91_PIOC 14 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC14 periph C LCDD16 pin */
+ AT91_PIOC 13 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC13 periph C LCDD17 pin */
+ AT91_PIOC 12 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC12 periph C LCDD18 pin */
+ AT91_PIOC 11 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC11 periph C LCDD19 pin */
+ AT91_PIOC 10 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC10 periph C LCDD20 pin */
+ AT91_PIOC 15 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC15 periph C LCDD21 pin */
+ AT91_PIOE 27 AT91_PERIPH_C AT91_PINCTRL_NONE /* PE27 periph C LCDD22 pin */
+ AT91_PIOE 28 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PE28 periph C LCDD23 pin */
+ };
+ };
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/sama5d3_mci2.dtsi b/arch/arm/boot/dts/sama5d3_mci2.dtsi
new file mode 100644
index 0000000..38e88e3
--- /dev/null
+++ b/arch/arm/boot/dts/sama5d3_mci2.dtsi
@@ -0,0 +1,47 @@
+/*
+ * at91sama5d3_mci2.dtsi - Device Tree Include file for AT91SAM9x5 SoC with
+ * 3 MMC ports
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ ahb {
+ apb {
+ pinctrl@fffff200 {
+ mmc2 {
+ pinctrl_mmc2_clk_cmd_dat0: mmc2_clk_cmd_dat0 {
+ atmel,pins =
+ <AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC15 periph A MCI2_CK, conflicts with PCK2 */
+ AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PC10 periph A MCI2_CDA with pullup */
+ AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PC11 periph A MCI2_DA0 with pullup */
+ };
+ pinctrl_mmc2_dat1_3: mmc2_dat1_3 {
+ atmel,pins =
+ <AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC12 periph A MCI2_DA1 with pullup, conflicts with TIOA1 */
+ AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC13 periph A MCI2_DA2 with pullup, conflicts with TIOB1 */
+ AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PC14 periph A MCI2_DA3 with pullup, conflicts with TCLK1 */
+ };
+ };
+ };
+
+ mmc2: mmc@f8004000 {
+ compatible = "atmel,hsmci";
+ reg = <0xf8004000 0x600>;
+ interrupts = <23 IRQ_TYPE_LEVEL_HIGH 0>;
+ dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(1)>;
+ dma-names = "rxtx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mmc2_clk_cmd_dat0 &pinctrl_mmc2_dat1_3>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/sama5d3_tcb1.dtsi b/arch/arm/boot/dts/sama5d3_tcb1.dtsi
new file mode 100644
index 0000000..5264bb4
--- /dev/null
+++ b/arch/arm/boot/dts/sama5d3_tcb1.dtsi
@@ -0,0 +1,27 @@
+/*
+ * at91sama5d3_tcb1.dtsi - Device Tree Include file for AT91SAM9x5 SoC with
+ * 2 TC blocks.
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ aliases {
+ tcb1 = &tcb1;
+ };
+
+ ahb {
+ apb {
+ tcb1: timer@f8014000 {
+ compatible = "atmel,at91sam9x5-tcb";
+ reg = <0xf8014000 0x100>;
+ interrupts = <27 IRQ_TYPE_LEVEL_HIGH 0>;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/sama5d3_uart.dtsi b/arch/arm/boot/dts/sama5d3_uart.dtsi
new file mode 100644
index 0000000..98fcb2d
--- /dev/null
+++ b/arch/arm/boot/dts/sama5d3_uart.dtsi
@@ -0,0 +1,53 @@
+/*
+ * at91sama5d3_uart.dtsi - Device Tree Include file for AT91SAM9x5 SoC with
+ * UART support
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ ahb {
+ apb {
+ pinctrl@fffff200 {
+ uart0 {
+ pinctrl_uart0: uart0-0 {
+ atmel,pins =
+ <AT91_PIOC 29 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC29 periph A, conflicts with PWMFI2, ISI_D8 */
+ AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PC30 periph A with pullup, conflicts with ISI_PCK */
+ };
+ };
+
+ uart1 {
+ pinctrl_uart1: uart1-0 {
+ atmel,pins =
+ <AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA30 periph B, conflicts with TWD0, ISI_VSYNC */
+ AT91_PIOA 31 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; /* PA31 periph B with pullup, conflicts with TWCK0, ISI_HSYNC */
+ };
+ };
+ };
+
+ uart0: serial@f0024000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xf0024000 0x200>;
+ interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart0>;
+ status = "disabled";
+ };
+
+ uart1: serial@f8028000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xf8028000 0x200>;
+ interrupts = <17 IRQ_TYPE_LEVEL_HIGH 5>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "disabled";
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/sama5d3xcm.dtsi b/arch/arm/boot/dts/sama5d3xcm.dtsi
index 31ed9e3..726a0f3 100644
--- a/arch/arm/boot/dts/sama5d3xcm.dtsi
+++ b/arch/arm/boot/dts/sama5d3xcm.dtsi
@@ -6,7 +6,6 @@
*
* Licensed under GPLv2 or later.
*/
-#include "sama5d3.dtsi"
/ {
compatible = "atmel,samad3xcm", "atmel,sama5d3", "atmel,sama5";
diff --git a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
index 9169d30..79425e3 100644
--- a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
+++ b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
@@ -653,6 +653,7 @@
reg-names = "fsmc_regs", "nand_data", "nand_addr", "nand_cmd";
clocks = <&hclksmc>;
status = "okay";
+ timings = /bits/ 8 <0 0 0 0x10 0x0a 0>;
partition@0 {
label = "X-Loader(NAND)";
@@ -707,8 +708,14 @@
pinctrl-0 = <&i2c0_default_mux>, <&i2c0_default_mode>;
stw4811@2d {
- compatible = "st,stw4811";
- reg = <0x2d>;
+ compatible = "st,stw4811";
+ reg = <0x2d>;
+ vmmc_regulator: vmmc {
+ compatible = "st,stw481x-vmmc";
+ regulator-name = "VMMC";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
};
};
@@ -839,6 +846,7 @@
cd-inverted;
pinctrl-names = "default";
pinctrl-0 = <&mmcsd_default_mux>, <&mmcsd_default_mode>;
+ vmmc-supply = <&vmmc_regulator>;
};
};
};
diff --git a/arch/arm/common/Makefile b/arch/arm/common/Makefile
index 8c60f47..eaa9cf4 100644
--- a/arch/arm/common/Makefile
+++ b/arch/arm/common/Makefile
@@ -6,7 +6,6 @@
obj-$(CONFIG_ICST) += icst.o
obj-$(CONFIG_SA1111) += sa1111.o
-obj-$(CONFIG_PCI_HOST_VIA82C505) += via82c505.o
obj-$(CONFIG_DMABOUNCE) += dmabounce.o
obj-$(CONFIG_SHARP_LOCOMO) += locomo.o
obj-$(CONFIG_SHARP_PARAM) += sharpsl_param.o
diff --git a/arch/arm/common/via82c505.c b/arch/arm/common/via82c505.c
deleted file mode 100644
index 6cb362e..0000000
--- a/arch/arm/common/via82c505.c
+++ /dev/null
@@ -1,83 +0,0 @@
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/interrupt.h>
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/io.h>
-
-
-#include <asm/mach/pci.h>
-
-#define MAX_SLOTS 7
-
-#define CONFIG_CMD(bus, devfn, where) (0x80000000 | (bus->number << 16) | (devfn << 8) | (where & ~3))
-
-static int
-via82c505_read_config(struct pci_bus *bus, unsigned int devfn, int where,
- int size, u32 *value)
-{
- outl(CONFIG_CMD(bus,devfn,where),0xCF8);
- switch (size) {
- case 1:
- *value=inb(0xCFC + (where&3));
- break;
- case 2:
- *value=inw(0xCFC + (where&2));
- break;
- case 4:
- *value=inl(0xCFC);
- break;
- }
- return PCIBIOS_SUCCESSFUL;
-}
-
-static int
-via82c505_write_config(struct pci_bus *bus, unsigned int devfn, int where,
- int size, u32 value)
-{
- outl(CONFIG_CMD(bus,devfn,where),0xCF8);
- switch (size) {
- case 1:
- outb(value, 0xCFC + (where&3));
- break;
- case 2:
- outw(value, 0xCFC + (where&2));
- break;
- case 4:
- outl(value, 0xCFC);
- break;
- }
- return PCIBIOS_SUCCESSFUL;
-}
-
-struct pci_ops via82c505_ops = {
- .read = via82c505_read_config,
- .write = via82c505_write_config,
-};
-
-void __init via82c505_preinit(void)
-{
- printk(KERN_DEBUG "PCI: VIA 82c505\n");
- if (!request_region(0xA8,2,"via config")) {
- printk(KERN_WARNING"VIA 82c505: Unable to request region 0xA8\n");
- return;
- }
- if (!request_region(0xCF8,8,"pci config")) {
- printk(KERN_WARNING"VIA 82c505: Unable to request region 0xCF8\n");
- release_region(0xA8, 2);
- return;
- }
-
- /* Enable compatible Mode */
- outb(0x96,0xA8);
- outb(0x18,0xA9);
- outb(0x93,0xA8);
- outb(0xd0,0xA9);
-
-}
-
-int __init via82c505_setup(int nr, struct pci_sys_data *sys)
-{
- return (nr == 0);
-}
diff --git a/arch/arm/configs/shark_defconfig b/arch/arm/configs/shark_defconfig
deleted file mode 100644
index e319b2c..0000000
--- a/arch/arm/configs/shark_defconfig
+++ /dev/null
@@ -1,80 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_SHARK=y
-CONFIG_LEDS=y
-CONFIG_LEDS_TIMER=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_STANDALONE is not set
-# CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_PARPORT=m
-CONFIG_PARPORT_PC=m
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDECD=m
-CONFIG_SCSI=m
-CONFIG_BLK_DEV_SD=m
-CONFIG_CHR_DEV_ST=m
-CONFIG_BLK_DEV_SR=m
-CONFIG_CHR_DEV_SG=m
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_PCI=y
-CONFIG_CS89x0=y
-# CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_PRINTER=m
-# CONFIG_HWMON is not set
-CONFIG_FB=y
-CONFIG_FB_CYBER2000=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_SOUND=m
-CONFIG_SOUND_PRIME=m
-CONFIG_SOUND_OSS=m
-CONFIG_SOUND_SB=m
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_CMOS=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFSD=m
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_ISO8859_1=m
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_SCHED_DEBUG is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_DEBUG_USER=y
diff --git a/arch/arm/include/asm/mach/pci.h b/arch/arm/include/asm/mach/pci.h
index 454d642..7fc4278 100644
--- a/arch/arm/include/asm/mach/pci.h
+++ b/arch/arm/include/asm/mach/pci.h
@@ -106,8 +106,4 @@
extern void dc21285_preinit(void);
extern void dc21285_postinit(void);
-extern struct pci_ops via82c505_ops;
-extern int via82c505_setup(int nr, struct pci_sys_data *);
-extern void via82c505_init(void *sysdata);
-
#endif /* __ASM_MACH_PCI_H */
diff --git a/arch/arm/include/asm/sched_clock.h b/arch/arm/include/asm/sched_clock.h
deleted file mode 100644
index 2389b71..0000000
--- a/arch/arm/include/asm/sched_clock.h
+++ /dev/null
@@ -1,4 +0,0 @@
-/* You shouldn't include this file. Use linux/sched_clock.h instead.
- * Temporary file until all asm/sched_clock.h users are gone
- */
-#include <linux/sched_clock.h>
diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c
index 98aee32..829a96d 100644
--- a/arch/arm/kernel/time.c
+++ b/arch/arm/kernel/time.c
@@ -11,25 +11,26 @@
* This file contains the ARM-specific time handling details:
* reading the RTC at bootup, etc...
*/
-#include <linux/export.h>
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/time.h>
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/smp.h>
-#include <linux/timex.h>
-#include <linux/errno.h>
-#include <linux/profile.h>
-#include <linux/timer.h>
+#include <linux/clk-provider.h>
#include <linux/clocksource.h>
+#include <linux/errno.h>
+#include <linux/export.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/profile.h>
+#include <linux/sched.h>
#include <linux/sched_clock.h>
+#include <linux/smp.h>
+#include <linux/time.h>
+#include <linux/timex.h>
+#include <linux/timer.h>
-#include <asm/thread_info.h>
-#include <asm/stacktrace.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
+#include <asm/stacktrace.h>
+#include <asm/thread_info.h>
#if defined(CONFIG_RTC_DRV_CMOS) || defined(CONFIG_RTC_DRV_CMOS_MODULE) || \
defined(CONFIG_NVRAM) || defined(CONFIG_NVRAM_MODULE)
@@ -116,8 +117,12 @@
void __init time_init(void)
{
- if (machine_desc->init_time)
+ if (machine_desc->init_time) {
machine_desc->init_time();
- else
+ } else {
+#ifdef CONFIG_COMMON_CLK
+ of_clk_init(NULL);
+#endif
clocksource_of_init();
+ }
}
diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile
index bd454b0..47d7338 100644
--- a/arch/arm/lib/Makefile
+++ b/arch/arm/lib/Makefile
@@ -41,7 +41,6 @@
endif
lib-$(CONFIG_ARCH_RPC) += ecard.o io-acorn.o floppydma.o
-lib-$(CONFIG_ARCH_SHARK) += io-shark.o
$(obj)/csumpartialcopy.o: $(obj)/csumpartialcopygeneric.S
$(obj)/csumpartialcopyuser.o: $(obj)/csumpartialcopygeneric.S
diff --git a/arch/arm/lib/io-shark.c b/arch/arm/lib/io-shark.c
deleted file mode 100644
index 8242539..0000000
--- a/arch/arm/lib/io-shark.c
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * linux/arch/arm/lib/io-shark.c
- *
- * by Alexander Schulz
- *
- * derived from:
- * linux/arch/arm/lib/io-ebsa.S
- * Copyright (C) 1995, 1996 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
diff --git a/arch/arm/mach-at91/board-cam60.c b/arch/arm/mach-at91/board-cam60.c
index ade948b..112e867 100644
--- a/arch/arm/mach-at91/board-cam60.c
+++ b/arch/arm/mach-at91/board-cam60.c
@@ -112,7 +112,7 @@
/*
* MACB Ethernet device
*/
-static struct __initdata macb_platform_data cam60_macb_data = {
+static struct macb_platform_data cam60_macb_data __initdata = {
.phy_irq_pin = AT91_PIN_PB5,
.is_rmii = 0,
};
diff --git a/arch/arm/mach-at91/board-dt-rm9200.c b/arch/arm/mach-at91/board-dt-rm9200.c
index 3fcb662..3a185fa 100644
--- a/arch/arm/mach-at91/board-dt-rm9200.c
+++ b/arch/arm/mach-at91/board-dt-rm9200.c
@@ -14,7 +14,6 @@
#include <linux/gpio.h>
#include <linux/of.h>
#include <linux/of_irq.h>
-#include <linux/of_platform.h>
#include <asm/setup.h>
#include <asm/irq.h>
@@ -36,11 +35,6 @@
of_irq_init(irq_of_match);
}
-static void __init at91rm9200_dt_device_init(void)
-{
- of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-}
-
static const char *at91rm9200_dt_board_compat[] __initdata = {
"atmel,at91rm9200",
NULL
@@ -52,6 +46,5 @@
.handle_irq = at91_aic_handle_irq,
.init_early = at91rm9200_dt_initialize,
.init_irq = at91rm9200_dt_init_irq,
- .init_machine = at91rm9200_dt_device_init,
.dt_compat = at91rm9200_dt_board_compat,
MACHINE_END
diff --git a/arch/arm/mach-at91/board-dt-sam9.c b/arch/arm/mach-at91/board-dt-sam9.c
index 8db3013..3dab868 100644
--- a/arch/arm/mach-at91/board-dt-sam9.c
+++ b/arch/arm/mach-at91/board-dt-sam9.c
@@ -13,7 +13,6 @@
#include <linux/gpio.h>
#include <linux/of.h>
#include <linux/of_irq.h>
-#include <linux/of_platform.h>
#include <asm/setup.h>
#include <asm/irq.h>
@@ -37,11 +36,6 @@
of_irq_init(irq_of_match);
}
-static void __init at91_dt_device_init(void)
-{
- of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-}
-
static const char *at91_dt_board_compat[] __initdata = {
"atmel,at91sam9",
NULL
@@ -54,6 +48,5 @@
.handle_irq = at91_aic_handle_irq,
.init_early = at91_dt_initialize,
.init_irq = at91_dt_init_irq,
- .init_machine = at91_dt_device_init,
.dt_compat = at91_dt_board_compat,
MACHINE_END
diff --git a/arch/arm/mach-bcm/board_bcm281xx.c b/arch/arm/mach-bcm/board_bcm281xx.c
index 8d9f931..26b2390 100644
--- a/arch/arm/mach-bcm/board_bcm281xx.c
+++ b/arch/arm/mach-bcm/board_bcm281xx.c
@@ -68,7 +68,6 @@
static const char * const bcm11351_dt_compat[] = { "brcm,bcm11351", NULL, };
DT_MACHINE_START(BCM11351_DT, "Broadcom Application Processor")
- .init_time = clocksource_of_init,
.init_machine = board_init,
.restart = bcm_kona_restart,
.dt_compat = bcm11351_dt_compat,
diff --git a/arch/arm/mach-bcm2835/bcm2835.c b/arch/arm/mach-bcm2835/bcm2835.c
index 40686d7..d50135b 100644
--- a/arch/arm/mach-bcm2835/bcm2835.c
+++ b/arch/arm/mach-bcm2835/bcm2835.c
@@ -18,7 +18,6 @@
#include <linux/of_address.h>
#include <linux/of_platform.h>
#include <linux/clk/bcm2835.h>
-#include <linux/clocksource.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -134,7 +133,6 @@
.init_irq = bcm2835_init_irq,
.handle_irq = bcm2835_handle_irq,
.init_machine = bcm2835_init,
- .init_time = clocksource_of_init,
.restart = bcm2835_restart,
.dt_compat = bcm2835_compat
MACHINE_END
diff --git a/arch/arm/mach-clps711x/common.c b/arch/arm/mach-clps711x/common.c
index 4ca2f3c..134641d 100644
--- a/arch/arm/mach-clps711x/common.c
+++ b/arch/arm/mach-clps711x/common.c
@@ -29,12 +29,12 @@
#include <linux/clockchips.h>
#include <linux/clocksource.h>
#include <linux/clk-provider.h>
+#include <linux/sched_clock.h>
#include <asm/exception.h>
#include <asm/mach/irq.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
-#include <asm/sched_clock.h>
#include <asm/system_misc.h>
#include <mach/hardware.h>
diff --git a/arch/arm/mach-dove/board-dt.c b/arch/arm/mach-dove/board-dt.c
index 49f72a8..ddb8663 100644
--- a/arch/arm/mach-dove/board-dt.c
+++ b/arch/arm/mach-dove/board-dt.c
@@ -10,17 +10,13 @@
#include <linux/init.h>
#include <linux/clk-provider.h>
-#include <linux/clocksource.h>
-#include <linux/irqchip.h>
#include <linux/of.h>
#include <linux/of_platform.h>
-#include <linux/platform_data/usb-ehci-orion.h>
#include <asm/hardware/cache-tauros2.h>
#include <asm/mach/arch.h>
#include <mach/dove.h>
#include <mach/pm.h>
#include <plat/common.h>
-#include <plat/irq.h>
#include "common.h"
/*
@@ -45,12 +41,6 @@
of_clk_get_from_provider(&clkspec));
}
-static void __init dove_dt_time_init(void)
-{
- of_clk_init(NULL);
- clocksource_of_init();
-}
-
static void __init dove_dt_init_early(void)
{
mvebu_mbus_init("marvell,dove-mbus",
@@ -84,7 +74,6 @@
DT_MACHINE_START(DOVE_DT, "Marvell Dove (Flattened Device Tree)")
.map_io = dove_map_io,
.init_early = dove_dt_init_early,
- .init_time = dove_dt_time_init,
.init_machine = dove_dt_init,
.restart = dove_restart,
.dt_compat = dove_dt_board_compat,
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index 56fe819..f9d67a0 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -14,19 +14,28 @@
config ARCH_EXYNOS4
bool "SAMSUNG EXYNOS4"
default y
+ select ARM_AMBA
+ select CLKSRC_OF
+ select CLKSRC_SAMSUNG_PWM if CPU_EXYNOS4210
+ select CPU_EXYNOS4210
select GIC_NON_BANKED
+ select KEYBOARD_SAMSUNG if INPUT_KEYBOARD
select HAVE_ARM_SCU if SMP
select HAVE_SMP
select MIGHT_HAVE_CACHE_L2X0
select PINCTRL
+ select S5P_DEV_MFC
help
Samsung EXYNOS4 SoCs based systems
config ARCH_EXYNOS5
bool "SAMSUNG EXYNOS5"
+ select ARM_AMBA
+ select CLKSRC_OF
select HAVE_ARM_SCU if SMP
select HAVE_SMP
select PINCTRL
+ select USB_ARCH_HAS_XHCI
help
Samsung EXYNOS5 (Cortex-A15) SoC based systems
@@ -110,35 +119,6 @@
help
Enable EXYNOS5440 SoC support
-comment "Flattened Device Tree based board for EXYNOS SoCs"
-
-config MACH_EXYNOS4_DT
- bool "Samsung Exynos4 Machine using device tree"
- default y
- depends on ARCH_EXYNOS4
- select ARM_AMBA
- select CLKSRC_OF
- select CLKSRC_SAMSUNG_PWM if CPU_EXYNOS4210
- select CPU_EXYNOS4210
- select KEYBOARD_SAMSUNG if INPUT_KEYBOARD
- select S5P_DEV_MFC
- help
- Machine support for Samsung Exynos4 machine with device tree enabled.
- Select this if a fdt blob is available for the Exynos4 SoC based board.
- Note: This is under development and not all peripherals can be supported
- with this machine file.
-
-config MACH_EXYNOS5_DT
- bool "SAMSUNG EXYNOS5 Machine using device tree"
- default y
- depends on ARCH_EXYNOS5
- select ARM_AMBA
- select CLKSRC_OF
- select USB_ARCH_HAS_XHCI
- help
- Machine support for Samsung EXYNOS5 machine with device tree enabled.
- Select this if a fdt blob is available for the EXYNOS5 SoC based board.
-
endmenu
endif
diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile
index 5369615..8930b66 100644
--- a/arch/arm/mach-exynos/Makefile
+++ b/arch/arm/mach-exynos/Makefile
@@ -32,5 +32,5 @@
# machine support
-obj-$(CONFIG_MACH_EXYNOS4_DT) += mach-exynos4-dt.o
-obj-$(CONFIG_MACH_EXYNOS5_DT) += mach-exynos5-dt.o
+obj-$(CONFIG_ARCH_EXYNOS4) += mach-exynos4-dt.o
+obj-$(CONFIG_ARCH_EXYNOS5) += mach-exynos5-dt.o
diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c
index ba95e5d..a4e7ba8 100644
--- a/arch/arm/mach-exynos/common.c
+++ b/arch/arm/mach-exynos/common.c
@@ -26,8 +26,6 @@
#include <linux/export.h>
#include <linux/irqdomain.h>
#include <linux/of_address.h>
-#include <linux/clocksource.h>
-#include <linux/clk-provider.h>
#include <linux/irqchip/arm-gic.h>
#include <linux/irqchip/chained_irq.h>
@@ -367,12 +365,6 @@
iotable_init(exynos5250_iodesc, ARRAY_SIZE(exynos5250_iodesc));
}
-void __init exynos_init_time(void)
-{
- of_clk_init(NULL);
- clocksource_of_init();
-}
-
struct bus_type exynos_subsys = {
.name = "exynos-core",
.dev_name = "exynos-core",
diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h
index 8646a14..f0fa205 100644
--- a/arch/arm/mach-exynos/common.h
+++ b/arch/arm/mach-exynos/common.h
@@ -16,7 +16,6 @@
#include <linux/of.h>
void mct_init(void __iomem *base, int irq_g0, int irq_l0, int irq_l1);
-void exynos_init_time(void);
struct map_desc;
void exynos_init_io(void);
diff --git a/arch/arm/mach-exynos/mach-exynos4-dt.c b/arch/arm/mach-exynos/mach-exynos4-dt.c
index 0099c6c..4b8f6e2 100644
--- a/arch/arm/mach-exynos/mach-exynos4-dt.c
+++ b/arch/arm/mach-exynos/mach-exynos4-dt.c
@@ -11,12 +11,8 @@
* published by the Free Software Foundation.
*/
-#include <linux/kernel.h>
#include <linux/of_platform.h>
#include <linux/of_fdt.h>
-#include <linux/serial_core.h>
-#include <linux/memblock.h>
-#include <linux/clocksource.h>
#include <asm/mach/arch.h>
#include <plat/mfc.h>
@@ -54,7 +50,6 @@
.init_early = exynos_firmware_init,
.init_machine = exynos4_dt_machine_init,
.init_late = exynos_init_late,
- .init_time = exynos_init_time,
.dt_compat = exynos4_dt_compat,
.restart = exynos4_restart,
.reserve = exynos4_reserve,
diff --git a/arch/arm/mach-exynos/mach-exynos5-dt.c b/arch/arm/mach-exynos/mach-exynos5-dt.c
index f874b77..7976ab3 100644
--- a/arch/arm/mach-exynos/mach-exynos5-dt.c
+++ b/arch/arm/mach-exynos/mach-exynos5-dt.c
@@ -11,14 +11,10 @@
#include <linux/of_platform.h>
#include <linux/of_fdt.h>
-#include <linux/memblock.h>
#include <linux/io.h>
-#include <linux/clocksource.h>
#include <asm/mach/arch.h>
#include <mach/regs-pmu.h>
-
-#include <plat/cpu.h>
#include <plat/mfc.h>
#include "common.h"
@@ -76,7 +72,6 @@
.map_io = exynos_init_io,
.init_machine = exynos5_dt_machine_init,
.init_late = exynos_init_late,
- .init_time = exynos_init_time,
.dt_compat = exynos5_dt_compat,
.restart = exynos5_restart,
.reserve = exynos5_reserve,
diff --git a/arch/arm/mach-highbank/Kconfig b/arch/arm/mach-highbank/Kconfig
index 8e8437d..616408d 100644
--- a/arch/arm/mach-highbank/Kconfig
+++ b/arch/arm/mach-highbank/Kconfig
@@ -12,7 +12,6 @@
select ARM_GIC
select ARM_TIMER_SP804
select CACHE_L2X0
- select CLKDEV_LOOKUP
select COMMON_CLK
select CPU_V7
select GENERIC_CLOCKEVENTS
diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c
index 8e63ccd..e6d6eac 100644
--- a/arch/arm/mach-highbank/highbank.c
+++ b/arch/arm/mach-highbank/highbank.c
@@ -24,7 +24,6 @@
#include <linux/of_platform.h>
#include <linux/of_address.h>
#include <linux/amba/bus.h>
-#include <linux/clk-provider.h>
#include <asm/cacheflush.h>
#include <asm/cputype.h>
@@ -83,20 +82,6 @@
}
}
-static void __init highbank_timer_init(void)
-{
- struct device_node *np;
-
- /* Map system registers */
- np = of_find_compatible_node(NULL, NULL, "calxeda,hb-sregs");
- sregs_base = of_iomap(np, 0);
- WARN_ON(!sregs_base);
-
- of_clk_init(NULL);
-
- clocksource_of_init();
-}
-
static void highbank_power_off(void)
{
highbank_set_pwr_shutdown();
@@ -155,6 +140,13 @@
static void __init highbank_init(void)
{
+ struct device_node *np;
+
+ /* Map system registers */
+ np = of_find_compatible_node(NULL, NULL, "calxeda,hb-sregs");
+ sregs_base = of_iomap(np, 0);
+ WARN_ON(!sregs_base);
+
pm_power_off = highbank_power_off;
highbank_pm_init();
@@ -176,7 +168,6 @@
#endif
.smp = smp_ops(highbank_smp_ops),
.init_irq = highbank_init_irq,
- .init_time = highbank_timer_init,
.init_machine = highbank_init,
.dt_compat = highbank_match,
.restart = highbank_restart,
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 29a8af6..a91909b 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -4,8 +4,8 @@
select ARM_CPU_SUSPEND if PM
select ARM_PATCH_PHYS_VIRT
select AUTO_ZRELADDR if !ZBOOT_ROM
- select CLKDEV_LOOKUP
select CLKSRC_MMIO
+ select COMMON_CLK
select GENERIC_ALLOCATOR
select GENERIC_CLOCKEVENTS
select GENERIC_IRQ_CHIP
@@ -92,14 +92,12 @@
config SOC_IMX1
bool
select ARCH_MX1
- select COMMON_CLK
select CPU_ARM920T
select IMX_HAVE_IOMUX_V1
select MXC_AVIC
config SOC_IMX21
bool
- select COMMON_CLK
select CPU_ARM926T
select IMX_HAVE_IOMUX_V1
select MXC_AVIC
@@ -108,7 +106,6 @@
bool
select ARCH_MX25
select ARCH_MXC_IOMUX_V3
- select COMMON_CLK
select CPU_ARM926T
select MXC_AVIC
@@ -116,7 +113,6 @@
bool
select ARCH_HAS_CPUFREQ
select ARCH_HAS_OPP
- select COMMON_CLK
select CPU_ARM926T
select IMX_HAVE_IOMUX_V1
select MACH_MX27
@@ -124,7 +120,6 @@
config SOC_IMX31
bool
- select COMMON_CLK
select CPU_V6
select IMX_HAVE_PLATFORM_MXC_RNGA
select MXC_AVIC
@@ -133,7 +128,6 @@
config SOC_IMX35
bool
select ARCH_MXC_IOMUX_V3
- select COMMON_CLK
select CPU_V6K
select HAVE_EPIT
select MXC_AVIC
@@ -144,7 +138,6 @@
select ARCH_HAS_CPUFREQ
select ARCH_HAS_OPP
select ARCH_MXC_IOMUX_V3
- select COMMON_CLK
select CPU_V7
select MXC_TZIC
@@ -791,7 +784,6 @@
select ARM_ERRATA_764369 if SMP
select ARM_ERRATA_775420
select ARM_GIC
- select COMMON_CLK
select CPU_V7
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c
index 7c0dc45..ceaac9c 100644
--- a/arch/arm/mach-imx/clk-imx51-imx53.c
+++ b/arch/arm/mach-imx/clk-imx51-imx53.c
@@ -11,6 +11,7 @@
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
#include <linux/of.h>
#include <linux/err.h>
@@ -131,8 +132,6 @@
{
int i;
- of_clk_init(NULL);
-
clk[dummy] = imx_clk_fixed("dummy", 0);
clk[ckil] = imx_obtain_fixed_clock("ckil", rate_ckil);
clk[osc] = imx_obtain_fixed_clock("osc", rate_osc);
@@ -465,12 +464,16 @@
return 0;
}
-int __init mx53_clocks_init(unsigned long rate_ckil, unsigned long rate_osc,
- unsigned long rate_ckih1, unsigned long rate_ckih2)
+static void __init mx51_clocks_init_dt(struct device_node *np)
+{
+ mx51_clocks_init(0, 0, 0, 0);
+}
+CLK_OF_DECLARE(imx51_ccm, "fsl,imx51-ccm", mx51_clocks_init_dt);
+
+static void __init mx53_clocks_init(struct device_node *np)
{
int i;
unsigned long r;
- struct device_node *np;
clk[pll1_sw] = imx_clk_pllv2("pll1_sw", "osc", MX53_DPLL1_BASE);
clk[pll2_sw] = imx_clk_pllv2("pll2_sw", "osc", MX53_DPLL2_BASE);
@@ -529,12 +532,11 @@
pr_err("i.MX53 clk %d: register failed with %ld\n",
i, PTR_ERR(clk[i]));
- np = of_find_compatible_node(NULL, NULL, "fsl,imx53-ccm");
clk_data.clks = clk;
clk_data.clk_num = ARRAY_SIZE(clk);
of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
- mx5_clocks_common_init(rate_ckil, rate_osc, rate_ckih1, rate_ckih2);
+ mx5_clocks_common_init(0, 0, 0, 0);
clk_register_clkdev(clk[vpu_gate], NULL, "imx53-vpu.0");
clk_register_clkdev(clk[i2c3_gate], NULL, "imx21-i2c.2");
@@ -566,16 +568,5 @@
r = clk_round_rate(clk[usboh3_per_gate], 54000000);
clk_set_rate(clk[usboh3_per_gate], r);
-
- return 0;
}
-
-int __init mx51_clocks_init_dt(void)
-{
- return mx51_clocks_init(0, 0, 0, 0);
-}
-
-int __init mx53_clocks_init_dt(void)
-{
- return mx53_clocks_init(0, 0, 0, 0);
-}
+CLK_OF_DECLARE(imx53_ccm, "fsl,imx53-ccm", mx53_clocks_init);
diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h
index 4517fd7..28e8ca0 100644
--- a/arch/arm/mach-imx/common.h
+++ b/arch/arm/mach-imx/common.h
@@ -63,13 +63,9 @@
extern int mx35_clocks_init(void);
extern int mx51_clocks_init(unsigned long ckil, unsigned long osc,
unsigned long ckih1, unsigned long ckih2);
-extern int mx53_clocks_init(unsigned long ckil, unsigned long osc,
- unsigned long ckih1, unsigned long ckih2);
extern int mx25_clocks_init_dt(void);
extern int mx27_clocks_init_dt(void);
extern int mx31_clocks_init_dt(void);
-extern int mx51_clocks_init_dt(void);
-extern int mx53_clocks_init_dt(void);
extern struct platform_device *mxc_register_gpio(char *name, int id,
resource_size_t iobase, resource_size_t iosize, int irq, int irq_high);
extern void mxc_set_cpu_type(unsigned int type);
diff --git a/arch/arm/mach-imx/imx51-dt.c b/arch/arm/mach-imx/imx51-dt.c
index 53e43e5..bece8a6 100644
--- a/arch/arm/mach-imx/imx51-dt.c
+++ b/arch/arm/mach-imx/imx51-dt.c
@@ -34,17 +34,11 @@
NULL
};
-static void __init imx51_timer_init(void)
-{
- mx51_clocks_init_dt();
-}
-
DT_MACHINE_START(IMX51_DT, "Freescale i.MX51 (Device Tree Support)")
.map_io = mx51_map_io,
.init_early = imx51_init_early,
.init_irq = mx51_init_irq,
.handle_irq = imx51_handle_irq,
- .init_time = imx51_timer_init,
.init_machine = imx51_dt_init,
.init_late = imx51_init_late,
.dt_compat = imx51_dt_board_compat,
diff --git a/arch/arm/mach-imx/mach-imx53.c b/arch/arm/mach-imx/mach-imx53.c
index 98c5894..c9c4d8d 100644
--- a/arch/arm/mach-imx/mach-imx53.c
+++ b/arch/arm/mach-imx/mach-imx53.c
@@ -36,17 +36,11 @@
NULL
};
-static void __init imx53_timer_init(void)
-{
- mx53_clocks_init_dt();
-}
-
DT_MACHINE_START(IMX53_DT, "Freescale i.MX53 (Device Tree Support)")
.map_io = mx53_map_io,
.init_early = imx53_init_early,
.init_irq = mx53_init_irq,
.handle_irq = imx53_handle_irq,
- .init_time = imx53_timer_init,
.init_machine = imx53_dt_init,
.init_late = imx53_init_late,
.dt_compat = imx53_dt_board_compat,
diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
index 90372a2..3be0fa0 100644
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -11,9 +11,7 @@
*/
#include <linux/clk.h>
-#include <linux/clk-provider.h>
#include <linux/clkdev.h>
-#include <linux/clocksource.h>
#include <linux/cpu.h>
#include <linux/delay.h>
#include <linux/export.h>
@@ -192,6 +190,9 @@
static void __init imx6q_init_machine(void)
{
+ imx_print_silicon_rev(cpu_is_imx6dl() ? "i.MX6DL" : "i.MX6Q",
+ imx6q_revision());
+
imx6q_enet_phy_init();
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
@@ -293,14 +294,6 @@
irqchip_init();
}
-static void __init imx6q_timer_init(void)
-{
- of_clk_init(NULL);
- clocksource_of_init();
- imx_print_silicon_rev(cpu_is_imx6dl() ? "i.MX6DL" : "i.MX6Q",
- imx6q_revision());
-}
-
static const char *imx6q_dt_compat[] __initdata = {
"fsl,imx6dl",
"fsl,imx6q",
@@ -311,7 +304,6 @@
.smp = smp_ops(imx_smp_ops),
.map_io = imx6q_map_io,
.init_irq = imx6q_init_irq,
- .init_time = imx6q_timer_init,
.init_machine = imx6q_init_machine,
.init_late = imx6q_init_late,
.dt_compat = imx6q_dt_compat,
diff --git a/arch/arm/mach-imx/mach-imx6sl.c b/arch/arm/mach-imx/mach-imx6sl.c
index 0d75dc5..c70bd7c 100644
--- a/arch/arm/mach-imx/mach-imx6sl.c
+++ b/arch/arm/mach-imx/mach-imx6sl.c
@@ -7,7 +7,6 @@
*
*/
-#include <linux/clk-provider.h>
#include <linux/irqchip.h>
#include <linux/of.h>
#include <linux/of_platform.h>
@@ -31,11 +30,6 @@
irqchip_init();
}
-static void __init imx6sl_timer_init(void)
-{
- of_clk_init(NULL);
-}
-
static const char *imx6sl_dt_compat[] __initdata = {
"fsl,imx6sl",
NULL,
@@ -44,7 +38,6 @@
DT_MACHINE_START(IMX6SL, "Freescale i.MX6 SoloLite (Device Tree)")
.map_io = debug_ll_io_init,
.init_irq = imx6sl_init_irq,
- .init_time = imx6sl_timer_init,
.init_machine = imx6sl_init_machine,
.dt_compat = imx6sl_dt_compat,
.restart = mxc_restart,
diff --git a/arch/arm/mach-imx/mach-vf610.c b/arch/arm/mach-imx/mach-vf610.c
index 816991d..af0cb8a 100644
--- a/arch/arm/mach-imx/mach-vf610.c
+++ b/arch/arm/mach-imx/mach-vf610.c
@@ -8,9 +8,7 @@
*/
#include <linux/of_platform.h>
-#include <linux/clocksource.h>
#include <linux/irqchip.h>
-#include <linux/clk-provider.h>
#include <asm/mach/arch.h>
#include <asm/hardware/cache-l2x0.h>
@@ -28,12 +26,6 @@
irqchip_init();
}
-static void __init vf610_init_time(void)
-{
- of_clk_init(NULL);
- clocksource_of_init();
-}
-
static const char *vf610_dt_compat[] __initdata = {
"fsl,vf610",
NULL,
@@ -41,7 +33,6 @@
DT_MACHINE_START(VYBRID_VF610, "Freescale Vybrid VF610 (Device Tree)")
.init_irq = vf610_init_irq,
- .init_time = vf610_init_time,
.init_machine = vf610_init_machine,
.dt_compat = vf610_dt_compat,
.restart = mxc_restart,
diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c
index 82d3ad8..a32a3e5 100644
--- a/arch/arm/mach-kirkwood/board-dt.c
+++ b/arch/arm/mach-kirkwood/board-dt.c
@@ -15,7 +15,6 @@
#include <linux/of.h>
#include <linux/of_platform.h>
#include <linux/clk-provider.h>
-#include <linux/clocksource.h>
#include <linux/dma-mapping.h>
#include <linux/irqchip.h>
#include <linux/kexec.h>
@@ -66,12 +65,6 @@
clk_prepare_enable(clk);
}
-static void __init kirkwood_dt_time_init(void)
-{
- of_clk_init(NULL);
- clocksource_of_init();
-}
-
static void __init kirkwood_dt_init_early(void)
{
mvebu_mbus_init("marvell,kirkwood-mbus",
@@ -122,7 +115,6 @@
/* Maintainer: Jason Cooper <jason@lakedaemon.net> */
.map_io = kirkwood_map_io,
.init_early = kirkwood_dt_init_early,
- .init_time = kirkwood_dt_time_init,
.init_machine = kirkwood_dt_init,
.restart = kirkwood_restart,
.dt_compat = kirkwood_dt_board_compat,
diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig
index 905efc8..2586c28 100644
--- a/arch/arm/mach-msm/Kconfig
+++ b/arch/arm/mach-msm/Kconfig
@@ -1,12 +1,12 @@
if ARCH_MSM
comment "Qualcomm MSM SoC Type"
- depends on (ARCH_MSM8X60 || ARCH_MSM8960)
+ depends on ARCH_MSM_DT
choice
prompt "Qualcomm MSM SoC Type"
default ARCH_MSM7X00A
- depends on !(ARCH_MSM8X60 || ARCH_MSM8960)
+ depends on !ARCH_MSM_DT
config ARCH_MSM7X00A
bool "MSM7x00A / MSM7x01A"
@@ -49,7 +49,6 @@
select GPIO_MSM_V2
select HAVE_SMP
select MSM_SCM if SMP
- select USE_OF
config ARCH_MSM8960
bool "MSM8960"
@@ -58,6 +57,11 @@
select HAVE_SMP
select GPIO_MSM_V2
select MSM_SCM if SMP
+
+config ARCH_MSM_DT
+ def_bool y
+ depends on (ARCH_MSM8X60 || ARCH_MSM8960)
+ select SPARSE_IRQ
select USE_OF
config MSM_HAS_DEBUG_UART_HS
@@ -68,6 +72,7 @@
config ARCH_MSM_ARM11
bool
+
config ARCH_MSM_SCORPION
bool
@@ -75,6 +80,7 @@
bool
menu "Qualcomm MSM Board Type"
+ depends on !ARCH_MSM_DT
config MACH_HALIBUT
depends on ARCH_MSM
@@ -122,6 +128,7 @@
config MSM_GPIOMUX
bool
+ depends on !ARCH_MSM_DT
help
Support for MSM V1 TLMM GPIOMUX architecture.
diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile
index d872634..7ed4c1b 100644
--- a/arch/arm/mach-msm/Makefile
+++ b/arch/arm/mach-msm/Makefile
@@ -26,7 +26,6 @@
obj-$(CONFIG_MACH_HALIBUT) += board-halibut.o devices-msm7x00.o
obj-$(CONFIG_ARCH_MSM7X30) += board-msm7x30.o devices-msm7x30.o
obj-$(CONFIG_ARCH_QSD8X50) += board-qsd8x50.o devices-qsd8x50.o
-obj-$(CONFIG_ARCH_MSM8X60) += board-dt-8660.o
-obj-$(CONFIG_ARCH_MSM8960) += board-dt-8960.o
+obj-$(CONFIG_ARCH_MSM_DT) += board-dt.o
obj-$(CONFIG_MSM_GPIOMUX) += gpiomux.o
obj-$(CONFIG_ARCH_QSD8X50) += gpiomux-8x50.o
diff --git a/arch/arm/mach-msm/board-dt-8660.c b/arch/arm/mach-msm/board-dt-8660.c
deleted file mode 100644
index c294689..0000000
--- a/arch/arm/mach-msm/board-dt-8660.c
+++ /dev/null
@@ -1,48 +0,0 @@
-/* Copyright (c) 2010-2012, The Linux Foundation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/init.h>
-#include <linux/of.h>
-#include <linux/of_platform.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include "common.h"
-
-static void __init msm8x60_init_late(void)
-{
- smd_debugfs_init();
-}
-
-static struct of_dev_auxdata msm_auxdata_lookup[] __initdata = {
- {}
-};
-
-static void __init msm8x60_dt_init(void)
-{
- of_platform_populate(NULL, of_default_bus_match_table,
- msm_auxdata_lookup, NULL);
-}
-
-static const char *msm8x60_fluid_match[] __initdata = {
- "qcom,msm8660-fluid",
- "qcom,msm8660-surf",
- NULL
-};
-
-DT_MACHINE_START(MSM_DT, "Qualcomm MSM (Flattened Device Tree)")
- .smp = smp_ops(msm_smp_ops),
- .init_machine = msm8x60_dt_init,
- .init_late = msm8x60_init_late,
- .dt_compat = msm8x60_fluid_match,
-MACHINE_END
diff --git a/arch/arm/mach-msm/board-dt-8960.c b/arch/arm/mach-msm/board-dt.c
similarity index 64%
rename from arch/arm/mach-msm/board-dt-8960.c
rename to arch/arm/mach-msm/board-dt.c
index d4ca52c..16e6183 100644
--- a/arch/arm/mach-msm/board-dt-8960.c
+++ b/arch/arm/mach-msm/board-dt.c
@@ -1,4 +1,4 @@
-/* Copyright (c) 2012, The Linux Foundation. All rights reserved.
+/* Copyright (c) 2010-2012,2013 The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
@@ -11,6 +11,7 @@
*/
#include <linux/init.h>
+#include <linux/of.h>
#include <linux/of_platform.h>
#include <asm/mach/arch.h>
@@ -18,18 +19,14 @@
#include "common.h"
-static void __init msm_dt_init(void)
-{
- of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-}
-
-static const char * const msm8960_dt_match[] __initconst = {
+static const char * const msm_dt_match[] __initconst = {
+ "qcom,msm8660-fluid",
+ "qcom,msm8660-surf",
"qcom,msm8960-cdp",
NULL
};
-DT_MACHINE_START(MSM8960_DT, "Qualcomm MSM (Flattened Device Tree)")
+DT_MACHINE_START(MSM_DT, "Qualcomm MSM (Flattened Device Tree)")
.smp = smp_ops(msm_smp_ops),
- .init_machine = msm_dt_init,
- .dt_compat = msm8960_dt_match,
+ .dt_compat = msm_dt_match,
MACHINE_END
diff --git a/arch/arm/mach-msm/include/mach/irqs-8960.h b/arch/arm/mach-msm/include/mach/irqs-8960.h
deleted file mode 100644
index 81ab2a6..0000000
--- a/arch/arm/mach-msm/include/mach/irqs-8960.h
+++ /dev/null
@@ -1,277 +0,0 @@
-/* Copyright (c) 2011 Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef __ASM_ARCH_MSM_IRQS_8960_H
-#define __ASM_ARCH_MSM_IRQS_8960_H
-
-/* MSM ACPU Interrupt Numbers */
-
-/* 0-15: STI/SGI (software triggered/generated interrupts)
- 16-31: PPI (private peripheral interrupts)
- 32+: SPI (shared peripheral interrupts) */
-
-#define GIC_PPI_START 16
-#define GIC_SPI_START 32
-
-#define INT_VGIC (GIC_PPI_START + 0)
-#define INT_DEBUG_TIMER_EXP (GIC_PPI_START + 1)
-#define INT_GP_TIMER_EXP (GIC_PPI_START + 2)
-#define INT_GP_TIMER2_EXP (GIC_PPI_START + 3)
-#define WDT0_ACCSCSSNBARK_INT (GIC_PPI_START + 4)
-#define WDT1_ACCSCSSNBARK_INT (GIC_PPI_START + 5)
-#define AVS_SVICINT (GIC_PPI_START + 6)
-#define AVS_SVICINTSWDONE (GIC_PPI_START + 7)
-#define CPU_DBGCPUXCOMMRXFULL (GIC_PPI_START + 8)
-#define CPU_DBGCPUXCOMMTXEMPTY (GIC_PPI_START + 9)
-#define CPU_SICCPUXPERFMONIRPTREQ (GIC_PPI_START + 10)
-#define SC_AVSCPUXDOWN (GIC_PPI_START + 11)
-#define SC_AVSCPUXUP (GIC_PPI_START + 12)
-#define SC_SICCPUXACGIRPTREQ (GIC_PPI_START + 13)
-#define SC_SICCPUXEXTFAULTIRPTREQ (GIC_PPI_START + 14)
-/* PPI 15 is unused */
-
-#define SC_SICMPUIRPTREQ (GIC_SPI_START + 0)
-#define SC_SICL2IRPTREQ (GIC_SPI_START + 1)
-#define SC_SICL2PERFMONIRPTREQ (GIC_SPI_START + 2)
-#define SC_SICAGCIRPTREQ (GIC_SPI_START + 3)
-#define TLMM_APCC_DIR_CONN_IRQ_0 (GIC_SPI_START + 4)
-#define TLMM_APCC_DIR_CONN_IRQ_1 (GIC_SPI_START + 5)
-#define TLMM_APCC_DIR_CONN_IRQ_2 (GIC_SPI_START + 6)
-#define TLMM_APCC_DIR_CONN_IRQ_3 (GIC_SPI_START + 7)
-#define TLMM_APCC_DIR_CONN_IRQ_4 (GIC_SPI_START + 8)
-#define TLMM_APCC_DIR_CONN_IRQ_5 (GIC_SPI_START + 9)
-#define TLMM_APCC_DIR_CONN_IRQ_6 (GIC_SPI_START + 10)
-#define TLMM_APCC_DIR_CONN_IRQ_7 (GIC_SPI_START + 11)
-#define TLMM_APCC_DIR_CONN_IRQ_8 (GIC_SPI_START + 12)
-#define TLMM_APCC_DIR_CONN_IRQ_9 (GIC_SPI_START + 13)
-#define PM8921_SEC_IRQ_103 (GIC_SPI_START + 14)
-#define PM8018_SEC_IRQ_106 (GIC_SPI_START + 15)
-#define TLMM_APCC_SUMMARY_IRQ (GIC_SPI_START + 16)
-#define SPDM_RT_1_IRQ (GIC_SPI_START + 17)
-#define SPDM_DIAG_IRQ (GIC_SPI_START + 18)
-#define RPM_APCC_CPU0_GP_HIGH_IRQ (GIC_SPI_START + 19)
-#define RPM_APCC_CPU0_GP_MEDIUM_IRQ (GIC_SPI_START + 20)
-#define RPM_APCC_CPU0_GP_LOW_IRQ (GIC_SPI_START + 21)
-#define RPM_APCC_CPU0_WAKE_UP_IRQ (GIC_SPI_START + 22)
-#define RPM_APCC_CPU1_GP_HIGH_IRQ (GIC_SPI_START + 23)
-#define RPM_APCC_CPU1_GP_MEDIUM_IRQ (GIC_SPI_START + 24)
-#define RPM_APCC_CPU1_GP_LOW_IRQ (GIC_SPI_START + 25)
-#define RPM_APCC_CPU1_WAKE_UP_IRQ (GIC_SPI_START + 26)
-#define SSBI2_2_SC_CPU0_SECURE_IRQ (GIC_SPI_START + 27)
-#define SSBI2_2_SC_CPU0_NON_SECURE_IRQ (GIC_SPI_START + 28)
-#define SSBI2_1_SC_CPU0_SECURE_IRQ (GIC_SPI_START + 29)
-#define SSBI2_1_SC_CPU0_NON_SECURE_IRQ (GIC_SPI_START + 30)
-#define MSMC_SC_SEC_CE_IRQ (GIC_SPI_START + 31)
-#define MSMC_SC_PRI_CE_IRQ (GIC_SPI_START + 32)
-#define SLIMBUS0_CORE_EE1_IRQ (GIC_SPI_START + 33)
-#define SLIMBUS0_BAM_EE1_IRQ (GIC_SPI_START + 34)
-#define Q6FW_WDOG_EXPIRED_IRQ (GIC_SPI_START + 35)
-#define Q6SW_WDOG_EXPIRED_IRQ (GIC_SPI_START + 36)
-#define MSS_TO_APPS_IRQ_0 (GIC_SPI_START + 37)
-#define MSS_TO_APPS_IRQ_1 (GIC_SPI_START + 38)
-#define MSS_TO_APPS_IRQ_2 (GIC_SPI_START + 39)
-#define MSS_TO_APPS_IRQ_3 (GIC_SPI_START + 40)
-#define MSS_TO_APPS_IRQ_4 (GIC_SPI_START + 41)
-#define MSS_TO_APPS_IRQ_5 (GIC_SPI_START + 42)
-#define MSS_TO_APPS_IRQ_6 (GIC_SPI_START + 43)
-#define MSS_TO_APPS_IRQ_7 (GIC_SPI_START + 44)
-#define MSS_TO_APPS_IRQ_8 (GIC_SPI_START + 45)
-#define MSS_TO_APPS_IRQ_9 (GIC_SPI_START + 46)
-#define VPE_IRQ (GIC_SPI_START + 47)
-#define VFE_IRQ (GIC_SPI_START + 48)
-#define VCODEC_IRQ (GIC_SPI_START + 49)
-#define TV_ENC_IRQ (GIC_SPI_START + 50)
-#define SMMU_VPE_CB_SC_SECURE_IRQ (GIC_SPI_START + 51)
-#define SMMU_VPE_CB_SC_NON_SECURE_IRQ (GIC_SPI_START + 52)
-#define SMMU_VFE_CB_SC_SECURE_IRQ (GIC_SPI_START + 53)
-#define SMMU_VFE_CB_SC_NON_SECURE_IRQ (GIC_SPI_START + 54)
-#define SMMU_VCODEC_B_CB_SC_SECURE_IRQ (GIC_SPI_START + 55)
-#define SMMU_VCODEC_B_CB_SC_NON_SECURE_IRQ (GIC_SPI_START + 56)
-#define SMMU_VCODEC_A_CB_SC_SECURE_IRQ (GIC_SPI_START + 57)
-#define SMMU_VCODEC_A_CB_SC_NON_SECURE_IRQ (GIC_SPI_START + 58)
-#define SMMU_ROT_CB_SC_SECURE_IRQ (GIC_SPI_START + 59)
-#define SMMU_ROT_CB_SC_NON_SECURE_IRQ (GIC_SPI_START + 60)
-#define SMMU_MDP1_CB_SC_SECURE_IRQ (GIC_SPI_START + 61)
-#define SMMU_MDP1_CB_SC_NON_SECURE_IRQ (GIC_SPI_START + 62)
-#define SMMU_MDP0_CB_SC_SECURE_IRQ (GIC_SPI_START + 63)
-#define SMMU_MDP0_CB_SC_NON_SECURE_IRQ (GIC_SPI_START + 64)
-#define SMMU_JPEGD_CB_SC_SECURE_IRQ (GIC_SPI_START + 65)
-#define SMMU_JPEGD_CB_SC_NON_SECURE_IRQ (GIC_SPI_START + 66)
-#define SMMU_IJPEG_CB_SC_SECURE_IRQ (GIC_SPI_START + 67)
-#define SMMU_IJPEG_CB_SC_NON_SECURE_IRQ (GIC_SPI_START + 68)
-#define SMMU_GFX3D_CB_SC_SECURE_IRQ (GIC_SPI_START + 69)
-#define SMMU_GFX3D_CB_SC_NON_SECURE_IRQ (GIC_SPI_START + 70)
-#define SMMU_GFX2D0_CB_SC_SECURE_IRQ (GIC_SPI_START + 71)
-#define SMMU_GFX2D0_CB_SC_NON_SECURE_IRQ (GIC_SPI_START + 72)
-#define ROT_IRQ (GIC_SPI_START + 73)
-#define MMSS_FABRIC_IRQ (GIC_SPI_START + 74)
-#define MDP_IRQ (GIC_SPI_START + 75)
-#define JPEGD_IRQ (GIC_SPI_START + 76)
-#define JPEG_IRQ (GIC_SPI_START + 77)
-#define MMSS_IMEM_IRQ (GIC_SPI_START + 78)
-#define HDMI_IRQ (GIC_SPI_START + 79)
-#define GFX3D_IRQ (GIC_SPI_START + 80)
-#define GFX2D0_IRQ (GIC_SPI_START + 81)
-#define DSI1_IRQ (GIC_SPI_START + 82)
-#define CSI_1_IRQ (GIC_SPI_START + 83)
-#define CSI_0_IRQ (GIC_SPI_START + 84)
-#define LPASS_SCSS_AUDIO_IF_OUT0_IRQ (GIC_SPI_START + 85)
-#define LPASS_SCSS_MIDI_IRQ (GIC_SPI_START + 86)
-#define LPASS_Q6SS_WDOG_EXPIRED (GIC_SPI_START + 87)
-#define LPASS_SCSS_GP_LOW_IRQ (GIC_SPI_START + 88)
-#define LPASS_SCSS_GP_MEDIUM_IRQ (GIC_SPI_START + 89)
-#define LPASS_SCSS_GP_HIGH_IRQ (GIC_SPI_START + 90)
-#define TOP_IMEM_IRQ (GIC_SPI_START + 91)
-#define FABRIC_SYS_IRQ (GIC_SPI_START + 92)
-#define FABRIC_APPS_IRQ (GIC_SPI_START + 93)
-#define USB1_HS_BAM_IRQ (GIC_SPI_START + 94)
-#define SDC4_BAM_IRQ (GIC_SPI_START + 95)
-#define SDC3_BAM_IRQ (GIC_SPI_START + 96)
-#define SDC2_BAM_IRQ (GIC_SPI_START + 97)
-#define SDC1_BAM_IRQ (GIC_SPI_START + 98)
-#define FABRIC_SPS_IRQ (GIC_SPI_START + 99)
-#define USB1_HS_IRQ (GIC_SPI_START + 100)
-#define SDC4_IRQ_0 (GIC_SPI_START + 101)
-#define SDC3_IRQ_0 (GIC_SPI_START + 102)
-#define SDC2_IRQ_0 (GIC_SPI_START + 103)
-#define SDC1_IRQ_0 (GIC_SPI_START + 104)
-#define SPS_BAM_DMA_IRQ (GIC_SPI_START + 105)
-#define SPS_SEC_VIOL_IRQ (GIC_SPI_START + 106)
-#define SPS_MTI_0 (GIC_SPI_START + 107)
-#define SPS_MTI_1 (GIC_SPI_START + 108)
-#define SPS_MTI_2 (GIC_SPI_START + 109)
-#define SPS_MTI_3 (GIC_SPI_START + 110)
-#define SPS_MTI_4 (GIC_SPI_START + 111)
-#define SPS_MTI_5 (GIC_SPI_START + 112)
-#define SPS_MTI_6 (GIC_SPI_START + 113)
-#define SPS_MTI_7 (GIC_SPI_START + 114)
-#define SPS_MTI_8 (GIC_SPI_START + 115)
-#define SPS_MTI_9 (GIC_SPI_START + 116)
-#define SPS_MTI_10 (GIC_SPI_START + 117)
-#define SPS_MTI_11 (GIC_SPI_START + 118)
-#define SPS_MTI_12 (GIC_SPI_START + 119)
-#define SPS_MTI_13 (GIC_SPI_START + 120)
-#define SPS_MTI_14 (GIC_SPI_START + 121)
-#define SPS_MTI_15 (GIC_SPI_START + 122)
-#define SPS_MTI_16 (GIC_SPI_START + 123)
-#define SPS_MTI_17 (GIC_SPI_START + 124)
-#define SPS_MTI_18 (GIC_SPI_START + 125)
-#define SPS_MTI_19 (GIC_SPI_START + 126)
-#define SPS_MTI_20 (GIC_SPI_START + 127)
-#define SPS_MTI_21 (GIC_SPI_START + 128)
-#define SPS_MTI_22 (GIC_SPI_START + 129)
-#define SPS_MTI_23 (GIC_SPI_START + 130)
-#define SPS_MTI_24 (GIC_SPI_START + 131)
-#define SPS_MTI_25 (GIC_SPI_START + 132)
-#define SPS_MTI_26 (GIC_SPI_START + 133)
-#define SPS_MTI_27 (GIC_SPI_START + 134)
-#define SPS_MTI_28 (GIC_SPI_START + 135)
-#define SPS_MTI_29 (GIC_SPI_START + 136)
-#define SPS_MTI_30 (GIC_SPI_START + 137)
-#define SPS_MTI_31 (GIC_SPI_START + 138)
-#define CSIPHY_4LN_IRQ (GIC_SPI_START + 139)
-#define CSIPHY_2LN_IRQ (GIC_SPI_START + 140)
-#define USB2_IRQ (GIC_SPI_START + 141)
-#define USB1_IRQ (GIC_SPI_START + 142)
-#define TSSC_SSBI_IRQ (GIC_SPI_START + 143)
-#define TSSC_SAMPLE_IRQ (GIC_SPI_START + 144)
-#define TSSC_PENUP_IRQ (GIC_SPI_START + 145)
-#define GSBI1_UARTDM_IRQ (GIC_SPI_START + 146)
-#define GSBI1_QUP_IRQ (GIC_SPI_START + 147)
-#define GSBI2_UARTDM_IRQ (GIC_SPI_START + 148)
-#define GSBI2_QUP_IRQ (GIC_SPI_START + 149)
-#define GSBI3_UARTDM_IRQ (GIC_SPI_START + 150)
-#define GSBI3_QUP_IRQ (GIC_SPI_START + 151)
-#define GSBI4_UARTDM_IRQ (GIC_SPI_START + 152)
-#define GSBI4_QUP_IRQ (GIC_SPI_START + 153)
-#define GSBI5_UARTDM_IRQ (GIC_SPI_START + 154)
-#define GSBI5_QUP_IRQ (GIC_SPI_START + 155)
-#define GSBI6_UARTDM_IRQ (GIC_SPI_START + 156)
-#define GSBI6_QUP_IRQ (GIC_SPI_START + 157)
-#define GSBI7_UARTDM_IRQ (GIC_SPI_START + 158)
-#define GSBI7_QUP_IRQ (GIC_SPI_START + 159)
-#define GSBI8_UARTDM_IRQ (GIC_SPI_START + 160)
-#define GSBI8_QUP_IRQ (GIC_SPI_START + 161)
-#define TSIF_TSPP_IRQ (GIC_SPI_START + 162)
-#define TSIF_BAM_IRQ (GIC_SPI_START + 163)
-#define TSIF2_IRQ (GIC_SPI_START + 164)
-#define TSIF1_IRQ (GIC_SPI_START + 165)
-#define DSI2_IRQ (GIC_SPI_START + 166)
-#define ISPIF_IRQ (GIC_SPI_START + 167)
-#define MSMC_SC_SEC_TMR_IRQ (GIC_SPI_START + 168)
-#define MSMC_SC_SEC_WDOG_BARK_IRQ (GIC_SPI_START + 169)
-#define INT_ADM0_SCSS_0_IRQ (GIC_SPI_START + 170)
-#define INT_ADM0_SCSS_1_IRQ (GIC_SPI_START + 171)
-#define INT_ADM0_SCSS_2_IRQ (GIC_SPI_START + 172)
-#define INT_ADM0_SCSS_3_IRQ (GIC_SPI_START + 173)
-#define CC_SCSS_WDT1CPU1BITEEXPIRED (GIC_SPI_START + 174)
-#define CC_SCSS_WDT1CPU0BITEEXPIRED (GIC_SPI_START + 175)
-#define CC_SCSS_WDT0CPU1BITEEXPIRED (GIC_SPI_START + 176)
-#define CC_SCSS_WDT0CPU0BITEEXPIRED (GIC_SPI_START + 177)
-#define TSENS_UPPER_LOWER_INT (GIC_SPI_START + 178)
-#define SSBI2_2_SC_CPU1_SECURE_INT (GIC_SPI_START + 179)
-#define SSBI2_2_SC_CPU1_NON_SECURE_INT (GIC_SPI_START + 180)
-#define SSBI2_1_SC_CPU1_SECURE_INT (GIC_SPI_START + 181)
-#define SSBI2_1_SC_CPU1_NON_SECURE_INT (GIC_SPI_START + 182)
-#define XPU_SUMMARY_IRQ (GIC_SPI_START + 183)
-#define BUS_EXCEPTION_SUMMARY_IRQ (GIC_SPI_START + 184)
-#define HSDDRX_EBI1CH0_IRQ (GIC_SPI_START + 185)
-#define HSDDRX_EBI1CH1_IRQ (GIC_SPI_START + 186)
-#define SDC5_BAM_IRQ (GIC_SPI_START + 187)
-#define SDC5_IRQ_0 (GIC_SPI_START + 188)
-#define GSBI9_UARTDM_IRQ (GIC_SPI_START + 189)
-#define GSBI9_QUP_IRQ (GIC_SPI_START + 190)
-#define GSBI10_UARTDM_IRQ (GIC_SPI_START + 191)
-#define GSBI10_QUP_IRQ (GIC_SPI_START + 192)
-#define GSBI11_UARTDM_IRQ (GIC_SPI_START + 193)
-#define GSBI11_QUP_IRQ (GIC_SPI_START + 194)
-#define GSBI12_UARTDM_IRQ (GIC_SPI_START + 195)
-#define GSBI12_QUP_IRQ (GIC_SPI_START + 196)
-#define RIVA_APSS_LTECOEX_IRQ (GIC_SPI_START + 197)
-#define RIVA_APSS_SPARE_IRQ (GIC_SPI_START + 198)
-#define RIVA_APSS_WDOG_BITE_RESET_RDY_IRQ (GIC_SPI_START + 199)
-#define RIVA_ASS_RESET_DONE_IRQ (GIC_SPI_START + 200)
-#define RIVA_APSS_ASIC_IRQ (GIC_SPI_START + 201)
-#define RIVA_APPS_WLAN_RX_DATA_AVAIL_IRQ (GIC_SPI_START + 202)
-#define RIVA_APPS_WLAN_DATA_XFER_DONE_IRQ (GIC_SPI_START + 203)
-#define RIVA_APPS_WLAM_SMSM_IRQ (GIC_SPI_START + 204)
-#define RIVA_APPS_LOG_CTRL_IRQ (GIC_SPI_START + 205)
-#define RIVA_APPS_FM_CTRL_IRQ (GIC_SPI_START + 206)
-#define RIVA_APPS_HCI_IRQ (GIC_SPI_START + 207)
-#define RIVA_APPS_WLAN_CTRL_IRQ (GIC_SPI_START + 208)
-#define A2_BAM_IRQ (GIC_SPI_START + 209)
-#define SMMU_GFX2D1_CB_SC_SECURE_IRQ (GIC_SPI_START + 210)
-#define SMMU_GFX2D1_CB_SC_NON_SECURE_IRQ (GIC_SPI_START + 211)
-#define GFX2D1_IRQ (GIC_SPI_START + 212)
-#define PPSS_WDOG_TIMER_IRQ (GIC_SPI_START + 213)
-#define SPS_SLIMBUS_CORE_EE0_IRQ (GIC_SPI_START + 214)
-#define SPS_SLIMBUS_BAM_EE0_IRQ (GIC_SPI_START + 215)
-#define QDSS_ETB_IRQ (GIC_SPI_START + 216)
-#define QDSS_CTI2KPSS_CPU1_IRQ (GIC_SPI_START + 217)
-#define QDSS_CTI2KPSS_CPU0_IRQ (GIC_SPI_START + 218)
-#define TLMM_APCC_DIR_CONN_IRQ_16 (GIC_SPI_START + 219)
-#define TLMM_APCC_DIR_CONN_IRQ_17 (GIC_SPI_START + 220)
-#define TLMM_APCC_DIR_CONN_IRQ_18 (GIC_SPI_START + 221)
-#define TLMM_APCC_DIR_CONN_IRQ_19 (GIC_SPI_START + 222)
-#define TLMM_APCC_DIR_CONN_IRQ_20 (GIC_SPI_START + 223)
-#define TLMM_APCC_DIR_CONN_IRQ_21 (GIC_SPI_START + 224)
-#define PM8921_SEC_IRQ_104 (GIC_SPI_START + 225)
-#define PM8018_SEC_IRQ_107 (GIC_SPI_START + 226)
-
-/* For now, use the maximum number of interrupts until a pending GIC issue
- * is sorted out */
-#define NR_MSM_IRQS 1020
-#define NR_BOARD_IRQS 0
-#define NR_GPIO_IRQS 0
-
-#endif
-
diff --git a/arch/arm/mach-msm/include/mach/irqs-8x60.h b/arch/arm/mach-msm/include/mach/irqs-8x60.h
deleted file mode 100644
index f65841c..0000000
--- a/arch/arm/mach-msm/include/mach/irqs-8x60.h
+++ /dev/null
@@ -1,258 +0,0 @@
-/* Copyright (c) 2010 Code Aurora Forum. All rights reserved.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __ASM_ARCH_MSM_IRQS_8X60_H
-#define __ASM_ARCH_MSM_IRQS_8X60_H
-
-/* MSM ACPU Interrupt Numbers */
-
-/* 0-15: STI/SGI (software triggered/generated interrupts)
- * 16-31: PPI (private peripheral interrupts)
- * 32+: SPI (shared peripheral interrupts)
- */
-
-#define GIC_PPI_START 16
-#define GIC_SPI_START 32
-
-#define INT_DEBUG_TIMER_EXP (GIC_PPI_START + 0)
-#define INT_GP_TIMER_EXP (GIC_PPI_START + 1)
-#define INT_GP_TIMER2_EXP (GIC_PPI_START + 2)
-#define WDT0_ACCSCSSNBARK_INT (GIC_PPI_START + 3)
-#define WDT1_ACCSCSSNBARK_INT (GIC_PPI_START + 4)
-#define AVS_SVICINT (GIC_PPI_START + 5)
-#define AVS_SVICINTSWDONE (GIC_PPI_START + 6)
-#define CPU_DBGCPUXCOMMRXFULL (GIC_PPI_START + 7)
-#define CPU_DBGCPUXCOMMTXEMPTY (GIC_PPI_START + 8)
-#define CPU_SICCPUXPERFMONIRPTREQ (GIC_PPI_START + 9)
-#define SC_AVSCPUXDOWN (GIC_PPI_START + 10)
-#define SC_AVSCPUXUP (GIC_PPI_START + 11)
-#define SC_SICCPUXACGIRPTREQ (GIC_PPI_START + 12)
-/* PPI 13 to 15 are unused */
-
-
-#define SC_SICMPUIRPTREQ (GIC_SPI_START + 0)
-#define SC_SICL2IRPTREQ (GIC_SPI_START + 1)
-#define SC_SICL2ACGIRPTREQ (GIC_SPI_START + 2)
-#define NC (GIC_SPI_START + 3)
-#define TLMM_SCSS_DIR_CONN_IRQ_0 (GIC_SPI_START + 4)
-#define TLMM_SCSS_DIR_CONN_IRQ_1 (GIC_SPI_START + 5)
-#define TLMM_SCSS_DIR_CONN_IRQ_2 (GIC_SPI_START + 6)
-#define TLMM_SCSS_DIR_CONN_IRQ_3 (GIC_SPI_START + 7)
-#define TLMM_SCSS_DIR_CONN_IRQ_4 (GIC_SPI_START + 8)
-#define TLMM_SCSS_DIR_CONN_IRQ_5 (GIC_SPI_START + 9)
-#define TLMM_SCSS_DIR_CONN_IRQ_6 (GIC_SPI_START + 10)
-#define TLMM_SCSS_DIR_CONN_IRQ_7 (GIC_SPI_START + 11)
-#define TLMM_SCSS_DIR_CONN_IRQ_8 (GIC_SPI_START + 12)
-#define TLMM_SCSS_DIR_CONN_IRQ_9 (GIC_SPI_START + 13)
-#define PM8058_SEC_IRQ_N (GIC_SPI_START + 14)
-#define PM8901_SEC_IRQ_N (GIC_SPI_START + 15)
-#define TLMM_SCSS_SUMMARY_IRQ (GIC_SPI_START + 16)
-#define SPDM_RT_1_IRQ (GIC_SPI_START + 17)
-#define SPDM_DIAG_IRQ (GIC_SPI_START + 18)
-#define RPM_SCSS_CPU0_GP_HIGH_IRQ (GIC_SPI_START + 19)
-#define RPM_SCSS_CPU0_GP_MEDIUM_IRQ (GIC_SPI_START + 20)
-#define RPM_SCSS_CPU0_GP_LOW_IRQ (GIC_SPI_START + 21)
-#define RPM_SCSS_CPU0_WAKE_UP_IRQ (GIC_SPI_START + 22)
-#define RPM_SCSS_CPU1_GP_HIGH_IRQ (GIC_SPI_START + 23)
-#define RPM_SCSS_CPU1_GP_MEDIUM_IRQ (GIC_SPI_START + 24)
-#define RPM_SCSS_CPU1_GP_LOW_IRQ (GIC_SPI_START + 25)
-#define RPM_SCSS_CPU1_WAKE_UP_IRQ (GIC_SPI_START + 26)
-#define SSBI2_2_SC_CPU0_SECURE_INT (GIC_SPI_START + 27)
-#define SSBI2_2_SC_CPU0_NON_SECURE_INT (GIC_SPI_START + 28)
-#define SSBI2_1_SC_CPU0_SECURE_INT (GIC_SPI_START + 29)
-#define SSBI2_1_SC_CPU0_NON_SECURE_INT (GIC_SPI_START + 30)
-#define MSMC_SC_SEC_CE_IRQ (GIC_SPI_START + 31)
-#define MSMC_SC_PRI_CE_IRQ (GIC_SPI_START + 32)
-#define MARM_FIQ (GIC_SPI_START + 33)
-#define MARM_IRQ (GIC_SPI_START + 34)
-#define MARM_L2CC_IRQ (GIC_SPI_START + 35)
-#define MARM_WDOG_EXPIRED (GIC_SPI_START + 36)
-#define MARM_SCSS_GP_IRQ_0 (GIC_SPI_START + 37)
-#define MARM_SCSS_GP_IRQ_1 (GIC_SPI_START + 38)
-#define MARM_SCSS_GP_IRQ_2 (GIC_SPI_START + 39)
-#define MARM_SCSS_GP_IRQ_3 (GIC_SPI_START + 40)
-#define MARM_SCSS_GP_IRQ_4 (GIC_SPI_START + 41)
-#define MARM_SCSS_GP_IRQ_5 (GIC_SPI_START + 42)
-#define MARM_SCSS_GP_IRQ_6 (GIC_SPI_START + 43)
-#define MARM_SCSS_GP_IRQ_7 (GIC_SPI_START + 44)
-#define MARM_SCSS_GP_IRQ_8 (GIC_SPI_START + 45)
-#define MARM_SCSS_GP_IRQ_9 (GIC_SPI_START + 46)
-#define VPE_IRQ (GIC_SPI_START + 47)
-#define VFE_IRQ (GIC_SPI_START + 48)
-#define VCODEC_IRQ (GIC_SPI_START + 49)
-#define TV_ENC_IRQ (GIC_SPI_START + 50)
-#define SMMU_VPE_CB_SC_SECURE_IRQ (GIC_SPI_START + 51)
-#define SMMU_VPE_CB_SC_NON_SECURE_IRQ (GIC_SPI_START + 52)
-#define SMMU_VFE_CB_SC_SECURE_IRQ (GIC_SPI_START + 53)
-#define SMMU_VFE_CB_SC_NON_SECURE_IRQ (GIC_SPI_START + 54)
-#define SMMU_VCODEC_B_CB_SC_SECURE_IRQ (GIC_SPI_START + 55)
-#define SMMU_VCODEC_B_CB_SC_NON_SECURE_IRQ (GIC_SPI_START + 56)
-#define SMMU_VCODEC_A_CB_SC_SECURE_IRQ (GIC_SPI_START + 57)
-#define SMMU_VCODEC_A_CB_SC_NON_SECURE_IRQ (GIC_SPI_START + 58)
-#define SMMU_ROT_CB_SC_SECURE_IRQ (GIC_SPI_START + 59)
-#define SMMU_ROT_CB_SC_NON_SECURE_IRQ (GIC_SPI_START + 60)
-#define SMMU_MDP1_CB_SC_SECURE_IRQ (GIC_SPI_START + 61)
-#define SMMU_MDP1_CB_SC_NON_SECURE_IRQ (GIC_SPI_START + 62)
-#define SMMU_MDP0_CB_SC_SECURE_IRQ (GIC_SPI_START + 63)
-#define SMMU_MDP0_CB_SC_NON_SECURE_IRQ (GIC_SPI_START + 64)
-#define SMMU_JPEGD_CB_SC_SECURE_IRQ (GIC_SPI_START + 65)
-#define SMMU_JPEGD_CB_SC_NON_SECURE_IRQ (GIC_SPI_START + 66)
-#define SMMU_IJPEG_CB_SC_SECURE_IRQ (GIC_SPI_START + 67)
-#define SMMU_IJPEG_CB_SC_NON_SECURE_IRQ (GIC_SPI_START + 68)
-#define SMMU_GFX3D_CB_SC_SECURE_IRQ (GIC_SPI_START + 69)
-#define SMMU_GFX3D_CB_SC_NON_SECURE_IRQ (GIC_SPI_START + 70)
-#define SMMU_GFX2D0_CB_SC_SECURE_IRQ (GIC_SPI_START + 71)
-#define SMMU_GFX2D0_CB_SC_NON_SECURE_IRQ (GIC_SPI_START + 72)
-#define ROT_IRQ (GIC_SPI_START + 73)
-#define MMSS_FABRIC_IRQ (GIC_SPI_START + 74)
-#define MDP_IRQ (GIC_SPI_START + 75)
-#define JPEGD_IRQ (GIC_SPI_START + 76)
-#define JPEG_IRQ (GIC_SPI_START + 77)
-#define MMSS_IMEM_IRQ (GIC_SPI_START + 78)
-#define HDMI_IRQ (GIC_SPI_START + 79)
-#define GFX3D_IRQ (GIC_SPI_START + 80)
-#define GFX2D0_IRQ (GIC_SPI_START + 81)
-#define DSI_IRQ (GIC_SPI_START + 82)
-#define CSI_1_IRQ (GIC_SPI_START + 83)
-#define CSI_0_IRQ (GIC_SPI_START + 84)
-#define LPASS_SCSS_AUDIO_IF_OUT0_IRQ (GIC_SPI_START + 85)
-#define LPASS_SCSS_MIDI_IRQ (GIC_SPI_START + 86)
-#define LPASS_Q6SS_WDOG_EXPIRED (GIC_SPI_START + 87)
-#define LPASS_SCSS_GP_LOW_IRQ (GIC_SPI_START + 88)
-#define LPASS_SCSS_GP_MEDIUM_IRQ (GIC_SPI_START + 89)
-#define LPASS_SCSS_GP_HIGH_IRQ (GIC_SPI_START + 90)
-#define TOP_IMEM_IRQ (GIC_SPI_START + 91)
-#define FABRIC_SYS_IRQ (GIC_SPI_START + 92)
-#define FABRIC_APPS_IRQ (GIC_SPI_START + 93)
-#define USB1_HS_BAM_IRQ (GIC_SPI_START + 94)
-#define SDC4_BAM_IRQ (GIC_SPI_START + 95)
-#define SDC3_BAM_IRQ (GIC_SPI_START + 96)
-#define SDC2_BAM_IRQ (GIC_SPI_START + 97)
-#define SDC1_BAM_IRQ (GIC_SPI_START + 98)
-#define FABRIC_SPS_IRQ (GIC_SPI_START + 99)
-#define USB1_HS_IRQ (GIC_SPI_START + 100)
-#define SDC4_IRQ_0 (GIC_SPI_START + 101)
-#define SDC3_IRQ_0 (GIC_SPI_START + 102)
-#define SDC2_IRQ_0 (GIC_SPI_START + 103)
-#define SDC1_IRQ_0 (GIC_SPI_START + 104)
-#define SPS_BAM_DMA_IRQ (GIC_SPI_START + 105)
-#define SPS_SEC_VIOL_IRQ (GIC_SPI_START + 106)
-#define SPS_MTI_0 (GIC_SPI_START + 107)
-#define SPS_MTI_1 (GIC_SPI_START + 108)
-#define SPS_MTI_2 (GIC_SPI_START + 109)
-#define SPS_MTI_3 (GIC_SPI_START + 110)
-#define SPS_MTI_4 (GIC_SPI_START + 111)
-#define SPS_MTI_5 (GIC_SPI_START + 112)
-#define SPS_MTI_6 (GIC_SPI_START + 113)
-#define SPS_MTI_7 (GIC_SPI_START + 114)
-#define SPS_MTI_8 (GIC_SPI_START + 115)
-#define SPS_MTI_9 (GIC_SPI_START + 116)
-#define SPS_MTI_10 (GIC_SPI_START + 117)
-#define SPS_MTI_11 (GIC_SPI_START + 118)
-#define SPS_MTI_12 (GIC_SPI_START + 119)
-#define SPS_MTI_13 (GIC_SPI_START + 120)
-#define SPS_MTI_14 (GIC_SPI_START + 121)
-#define SPS_MTI_15 (GIC_SPI_START + 122)
-#define SPS_MTI_16 (GIC_SPI_START + 123)
-#define SPS_MTI_17 (GIC_SPI_START + 124)
-#define SPS_MTI_18 (GIC_SPI_START + 125)
-#define SPS_MTI_19 (GIC_SPI_START + 126)
-#define SPS_MTI_20 (GIC_SPI_START + 127)
-#define SPS_MTI_21 (GIC_SPI_START + 128)
-#define SPS_MTI_22 (GIC_SPI_START + 129)
-#define SPS_MTI_23 (GIC_SPI_START + 130)
-#define SPS_MTI_24 (GIC_SPI_START + 131)
-#define SPS_MTI_25 (GIC_SPI_START + 132)
-#define SPS_MTI_26 (GIC_SPI_START + 133)
-#define SPS_MTI_27 (GIC_SPI_START + 134)
-#define SPS_MTI_28 (GIC_SPI_START + 135)
-#define SPS_MTI_29 (GIC_SPI_START + 136)
-#define SPS_MTI_30 (GIC_SPI_START + 137)
-#define SPS_MTI_31 (GIC_SPI_START + 138)
-#define UXMC_EBI2_WR_ER_DONE_IRQ (GIC_SPI_START + 139)
-#define UXMC_EBI2_OP_DONE_IRQ (GIC_SPI_START + 140)
-#define USB2_IRQ (GIC_SPI_START + 141)
-#define USB1_IRQ (GIC_SPI_START + 142)
-#define TSSC_SSBI_IRQ (GIC_SPI_START + 143)
-#define TSSC_SAMPLE_IRQ (GIC_SPI_START + 144)
-#define TSSC_PENUP_IRQ (GIC_SPI_START + 145)
-#define INT_UART1DM_IRQ (GIC_SPI_START + 146)
-#define GSBI1_QUP_IRQ (GIC_SPI_START + 147)
-#define INT_UART2DM_IRQ (GIC_SPI_START + 148)
-#define GSBI2_QUP_IRQ (GIC_SPI_START + 149)
-#define INT_UART3DM_IRQ (GIC_SPI_START + 150)
-#define GSBI3_QUP_IRQ (GIC_SPI_START + 151)
-#define INT_UART4DM_IRQ (GIC_SPI_START + 152)
-#define GSBI4_QUP_IRQ (GIC_SPI_START + 153)
-#define INT_UART5DM_IRQ (GIC_SPI_START + 154)
-#define GSBI5_QUP_IRQ (GIC_SPI_START + 155)
-#define INT_UART6DM_IRQ (GIC_SPI_START + 156)
-#define GSBI6_QUP_IRQ (GIC_SPI_START + 157)
-#define INT_UART7DM_IRQ (GIC_SPI_START + 158)
-#define GSBI7_QUP_IRQ (GIC_SPI_START + 159)
-#define INT_UART8DM_IRQ (GIC_SPI_START + 160)
-#define GSBI8_QUP_IRQ (GIC_SPI_START + 161)
-#define TSIF_TSPP_IRQ (GIC_SPI_START + 162)
-#define TSIF_BAM_IRQ (GIC_SPI_START + 163)
-#define TSIF2_IRQ (GIC_SPI_START + 164)
-#define TSIF1_IRQ (GIC_SPI_START + 165)
-#define INT_ADM1_MASTER (GIC_SPI_START + 166)
-#define INT_ADM1_AARM (GIC_SPI_START + 167)
-#define INT_ADM1_SD2 (GIC_SPI_START + 168)
-#define INT_ADM1_SD3 (GIC_SPI_START + 169)
-#define INT_ADM0_MASTER (GIC_SPI_START + 170)
-#define INT_ADM0_AARM (GIC_SPI_START + 171)
-#define INT_ADM0_SD2 (GIC_SPI_START + 172)
-#define INT_ADM0_SD3 (GIC_SPI_START + 173)
-#define CC_SCSS_WDT1CPU1BITEEXPIRED (GIC_SPI_START + 174)
-#define CC_SCSS_WDT1CPU0BITEEXPIRED (GIC_SPI_START + 175)
-#define CC_SCSS_WDT0CPU1BITEEXPIRED (GIC_SPI_START + 176)
-#define CC_SCSS_WDT0CPU0BITEEXPIRED (GIC_SPI_START + 177)
-#define TSENS_UPPER_LOWER_INT (GIC_SPI_START + 178)
-#define SSBI2_2_SC_CPU1_SECURE_INT (GIC_SPI_START + 179)
-#define SSBI2_2_SC_CPU1_NON_SECURE_INT (GIC_SPI_START + 180)
-#define SSBI2_1_SC_CPU1_SECURE_INT (GIC_SPI_START + 181)
-#define SSBI2_1_SC_CPU1_NON_SECURE_INT (GIC_SPI_START + 182)
-#define XPU_SUMMARY_IRQ (GIC_SPI_START + 183)
-#define BUS_EXCEPTION_SUMMARY_IRQ (GIC_SPI_START + 184)
-#define HSDDRX_SMICH0_IRQ (GIC_SPI_START + 185)
-#define HSDDRX_EBI1_IRQ (GIC_SPI_START + 186)
-#define SDC5_BAM_IRQ (GIC_SPI_START + 187)
-#define SDC5_IRQ_0 (GIC_SPI_START + 188)
-#define INT_UART9DM_IRQ (GIC_SPI_START + 189)
-#define GSBI9_QUP_IRQ (GIC_SPI_START + 190)
-#define INT_UART10DM_IRQ (GIC_SPI_START + 191)
-#define GSBI10_QUP_IRQ (GIC_SPI_START + 192)
-#define INT_UART11DM_IRQ (GIC_SPI_START + 193)
-#define GSBI11_QUP_IRQ (GIC_SPI_START + 194)
-#define INT_UART12DM_IRQ (GIC_SPI_START + 195)
-#define GSBI12_QUP_IRQ (GIC_SPI_START + 196)
-
-/*SPI 197 to 209 arent used in 8x60*/
-#define SMMU_GFX2D1_CB_SC_SECURE_IRQ (GIC_SPI_START + 210)
-#define SMMU_GFX2D1_CB_SC_NON_SECURE_IRQ (GIC_SPI_START + 211)
-
-/*SPI 212 to 216 arent used in 8x60*/
-#define SMPSS_SPARE_1 (GIC_SPI_START + 217)
-#define SMPSS_SPARE_2 (GIC_SPI_START + 218)
-#define SMPSS_SPARE_3 (GIC_SPI_START + 219)
-#define SMPSS_SPARE_4 (GIC_SPI_START + 220)
-#define SMPSS_SPARE_5 (GIC_SPI_START + 221)
-#define SMPSS_SPARE_6 (GIC_SPI_START + 222)
-#define SMPSS_SPARE_7 (GIC_SPI_START + 223)
-
-#define NR_GPIO_IRQS 173
-#define NR_MSM_IRQS 256
-#define NR_BOARD_IRQS 0
-
-#endif
diff --git a/arch/arm/mach-msm/include/mach/irqs.h b/arch/arm/mach-msm/include/mach/irqs.h
index 3cd78b1..164d355 100644
--- a/arch/arm/mach-msm/include/mach/irqs.h
+++ b/arch/arm/mach-msm/include/mach/irqs.h
@@ -24,11 +24,6 @@
#elif defined(CONFIG_ARCH_QSD8X50)
#include "irqs-8x50.h"
#include "sirc.h"
-#elif defined(CONFIG_ARCH_MSM8X60)
-#include "irqs-8x60.h"
-#elif defined(CONFIG_ARCH_MSM8960)
-/* TODO: Make these not generic. */
-#include "irqs-8960.h"
#elif defined(CONFIG_ARCH_MSM_ARM11)
#include "irqs-7x00.h"
#else
diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c
index 98f6e2a..cc511a4 100644
--- a/arch/arm/mach-mxs/mach-mxs.c
+++ b/arch/arm/mach-mxs/mach-mxs.c
@@ -13,8 +13,6 @@
#include <linux/clk.h>
#include <linux/clk/mxs.h>
#include <linux/clkdev.h>
-#include <linux/clocksource.h>
-#include <linux/clk-provider.h>
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/gpio.h>
@@ -490,16 +488,6 @@
soft_restart(0);
}
-static void __init mxs_timer_init(void)
-{
- if (of_machine_is_compatible("fsl,imx23"))
- mx23_clocks_init();
- else
- mx28_clocks_init();
- of_clk_init(NULL);
- clocksource_of_init();
-}
-
static const char *mxs_dt_compat[] __initdata = {
"fsl,imx28",
"fsl,imx23",
@@ -508,7 +496,6 @@
DT_MACHINE_START(MXS, "Freescale MXS (Device Tree)")
.handle_irq = icoll_handle_irq,
- .init_time = mxs_timer_init,
.init_machine = mxs_machine_init,
.init_late = mxs_pm_init,
.dt_compat = mxs_dt_compat,
diff --git a/arch/arm/mach-nomadik/cpu-8815.c b/arch/arm/mach-nomadik/cpu-8815.c
index 13e0df9..cce2c9d 100644
--- a/arch/arm/mach-nomadik/cpu-8815.c
+++ b/arch/arm/mach-nomadik/cpu-8815.c
@@ -25,15 +25,11 @@
#include <linux/slab.h>
#include <linux/irq.h>
#include <linux/dma-mapping.h>
-#include <linux/platform_data/clk-nomadik.h>
-#include <linux/clocksource.h>
#include <linux/of_irq.h>
#include <linux/of_gpio.h>
#include <linux/of_address.h>
#include <linux/of_platform.h>
-#include <linux/mtd/fsmc.h>
#include <linux/gpio.h>
-#include <linux/amba/mmci.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -113,50 +109,6 @@
writel(1, srcbase + 0x18);
}
-/* Initial value for SRC control register: all timers use MXTAL/8 source */
-#define SRC_CR_INIT_MASK 0x00007fff
-#define SRC_CR_INIT_VAL 0x2aaa8000
-
-static void __init cpu8815_timer_init_of(void)
-{
- struct device_node *mtu;
- void __iomem *base;
- int irq;
- u32 src_cr;
-
- /* We need this to be up now */
- nomadik_clk_init();
-
- mtu = of_find_node_by_path("/mtu@101e2000");
- if (!mtu)
- return;
- base = of_iomap(mtu, 0);
- if (WARN_ON(!base))
- return;
- irq = irq_of_parse_and_map(mtu, 0);
-
- pr_info("Remapped MTU @ %p, irq: %d\n", base, irq);
-
- /* Configure timer sources in "system reset controller" ctrl reg */
- src_cr = readl(base);
- src_cr &= SRC_CR_INIT_MASK;
- src_cr |= SRC_CR_INIT_VAL;
- writel(src_cr, base);
-
- clocksource_of_init();
-}
-
-static struct fsmc_nand_timings cpu8815_nand_timings = {
- .thiz = 0,
- .thold = 0x10,
- .twait = 0x0A,
- .tset = 0,
-};
-
-static struct fsmc_nand_platform_data cpu8815_nand_data = {
- .nand_timings = &cpu8815_nand_timings,
-};
-
/*
* The SMSC911x IRQ is connected to a GPIO pin, but the driver expects
* to simply request an IRQ passed as a resource. So the GPIO pin needs
@@ -190,15 +142,6 @@
device_initcall(cpu8815_eth_init);
/*
- * TODO:
- * cannot be set from device tree, convert to a proper DT
- * binding.
- */
-static struct mmci_platform_data mmcsd_plat_data = {
- .ocr_mask = MMC_VDD_29_30,
-};
-
-/*
* This GPIO pin turns on a line that is used to detect card insertion
* on this board.
*/
@@ -232,24 +175,13 @@
}
device_initcall(cpu8815_mmcsd_init);
-
-/* These are mostly to get the right device names for the clock lookups */
-static struct of_dev_auxdata cpu8815_auxdata_lookup[] __initdata = {
- OF_DEV_AUXDATA("stericsson,fsmc-nand", NOMADIK_FSMC_BASE,
- NULL, &cpu8815_nand_data),
- OF_DEV_AUXDATA("arm,primecell", NOMADIK_SDI_BASE,
- NULL, &mmcsd_plat_data),
- { /* sentinel */ },
-};
-
static void __init cpu8815_init_of(void)
{
#ifdef CONFIG_CACHE_L2X0
/* At full speed latency must be >=2, so 0x249 in low bits */
l2x0_of_init(0x00730249, 0xfe000fff);
#endif
- of_platform_populate(NULL, of_default_bus_match_table,
- cpu8815_auxdata_lookup, NULL);
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
static const char * cpu8815_board_compat[] = {
@@ -259,7 +191,6 @@
DT_MACHINE_START(NOMADIK_DT, "Nomadik STn8815")
.map_io = cpu8815_map_io,
- .init_time = cpu8815_timer_init_of,
.init_machine = cpu8815_init_of,
.restart = cpu8815_restart,
.dt_compat = cpu8815_board_compat,
diff --git a/arch/arm/mach-nspire/nspire.c b/arch/arm/mach-nspire/nspire.c
index 99e2609..4b2ed2e 100644
--- a/arch/arm/mach-nspire/nspire.c
+++ b/arch/arm/mach-nspire/nspire.c
@@ -14,11 +14,9 @@
#include <linux/of_platform.h>
#include <linux/irqchip.h>
#include <linux/irqchip/arm-vic.h>
-#include <linux/clk-provider.h>
#include <linux/clkdev.h>
#include <linux/amba/bus.h>
#include <linux/amba/clcd.h>
-#include <linux/clocksource.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
@@ -65,12 +63,6 @@
nspire_auxdata, NULL);
}
-static void __init nspire_init_time(void)
-{
- of_clk_init(NULL);
- clocksource_of_init();
-}
-
static void nspire_restart(char mode, const char *cmd)
{
void __iomem *base = ioremap(NSPIRE_MISC_PHYS_BASE, SZ_4K);
@@ -83,7 +75,6 @@
DT_MACHINE_START(NSPIRE, "TI-NSPIRE")
.dt_compat = nspire_dt_match,
.map_io = nspire_map_io,
- .init_time = nspire_init_time,
.init_machine = nspire_init,
.restart = nspire_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index b5fb5f7..c946244 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -8,7 +8,6 @@
select CPU_V6
select MULTI_IRQ_HANDLER
select SOC_HAS_OMAP2_SDRC
- select COMMON_CLK
config ARCH_OMAP3
bool "TI OMAP3"
@@ -22,7 +21,6 @@
select PM_OPP if PM
select PM_RUNTIME if CPU_IDLE
select SOC_HAS_OMAP2_SDRC
- select COMMON_CLK
select USB_ARCH_HAS_EHCI if USB_SUPPORT
config ARCH_OMAP4
@@ -45,7 +43,6 @@
select PM_OPP if PM
select PM_RUNTIME if CPU_IDLE
select USB_ARCH_HAS_EHCI if USB_SUPPORT
- select COMMON_CLK
select ARM_ERRATA_754322
select ARM_ERRATA_775420
@@ -59,7 +56,6 @@
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if LOCAL_TIMERS
select HAVE_SMP
- select COMMON_CLK
select HAVE_ARM_ARCH_TIMER
select ARM_ERRATA_798181 if SMP
@@ -70,7 +66,6 @@
select ARM_CPU_SUSPEND if PM
select CPU_V7
select MULTI_IRQ_HANDLER
- select COMMON_CLK
config SOC_AM43XX
bool "TI AM43x"
@@ -79,7 +74,6 @@
select ARCH_OMAP2PLUS
select MULTI_IRQ_HANDLER
select ARM_GIC
- select COMMON_CLK
select MACH_OMAP_GENERIC
config ARCH_OMAP2PLUS
@@ -89,11 +83,10 @@
select ARCH_HAS_HOLES_MEMORYMODEL
select ARCH_OMAP
select ARCH_REQUIRE_GPIOLIB
- select CLKDEV_LOOKUP
select CLKSRC_MMIO
+ select COMMON_CLK
select GENERIC_CLOCKEVENTS
select GENERIC_IRQ_CHIP
- select HAVE_CLK
select OMAP_DM_TIMER
select PINCTRL
select PROC_DEVICETREE if PROC_FS
diff --git a/arch/arm/mach-prima2/common.c b/arch/arm/mach-prima2/common.c
index e110b6d..d49aff7 100644
--- a/arch/arm/mach-prima2/common.c
+++ b/arch/arm/mach-prima2/common.c
@@ -6,7 +6,6 @@
* Licensed under GPLv2 or later.
*/
-#include <linux/clocksource.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <asm/sizes.h>
@@ -21,13 +20,6 @@
sirfsoc_pm_init();
}
-static __init void sirfsoc_init_time(void)
-{
- /* initialize clocking early, we want to set the OS timer */
- sirfsoc_of_clk_init();
- clocksource_of_init();
-}
-
static __init void sirfsoc_map_io(void)
{
sirfsoc_map_lluart();
@@ -43,7 +35,6 @@
DT_MACHINE_START(ATLAS6_DT, "Generic ATLAS6 (Flattened Device Tree)")
/* Maintainer: Barry Song <baohua.song@csr.com> */
.map_io = sirfsoc_map_io,
- .init_time = sirfsoc_init_time,
.init_late = sirfsoc_init_late,
.dt_compat = atlas6_dt_match,
.restart = sirfsoc_restart,
@@ -59,7 +50,6 @@
DT_MACHINE_START(PRIMA2_DT, "Generic PRIMA2 (Flattened Device Tree)")
/* Maintainer: Barry Song <baohua.song@csr.com> */
.map_io = sirfsoc_map_io,
- .init_time = sirfsoc_init_time,
.dma_zone_size = SZ_256M,
.init_late = sirfsoc_init_late,
.dt_compat = prima2_dt_match,
@@ -77,7 +67,6 @@
/* Maintainer: Barry Song <baohua.song@csr.com> */
.smp = smp_ops(sirfsoc_smp_ops),
.map_io = sirfsoc_map_io,
- .init_time = sirfsoc_init_time,
.init_late = sirfsoc_init_late,
.dt_compat = marco_dt_match,
.restart = sirfsoc_restart,
diff --git a/arch/arm/mach-prima2/common.h b/arch/arm/mach-prima2/common.h
index a630485..4b76806 100644
--- a/arch/arm/mach-prima2/common.h
+++ b/arch/arm/mach-prima2/common.h
@@ -23,7 +23,6 @@
extern void sirfsoc_cpu_die(unsigned int cpu);
extern void __init sirfsoc_of_irq_init(void);
-extern void __init sirfsoc_of_clk_init(void);
extern void sirfsoc_restart(enum reboot_mode, const char *);
extern asmlinkage void __exception_irq_entry sirfsoc_handle_irq(struct pt_regs *regs);
diff --git a/arch/arm/mach-rockchip/rockchip.c b/arch/arm/mach-rockchip/rockchip.c
index 724d2d8..82c0b07 100644
--- a/arch/arm/mach-rockchip/rockchip.c
+++ b/arch/arm/mach-rockchip/rockchip.c
@@ -19,18 +19,10 @@
#include <linux/init.h>
#include <linux/of_platform.h>
#include <linux/irqchip.h>
-#include <linux/dw_apb_timer.h>
-#include <linux/clk-provider.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/hardware/cache-l2x0.h>
-static void __init rockchip_timer_init(void)
-{
- of_clk_init(NULL);
- clocksource_of_init();
-}
-
static void __init rockchip_dt_init(void)
{
l2x0_of_init(0, ~0UL);
@@ -47,6 +39,5 @@
DT_MACHINE_START(ROCKCHIP_DT, "Rockchip Cortex-A9 (Device Tree)")
.init_machine = rockchip_dt_init,
- .init_time = rockchip_timer_init,
.dt_compat = rockchip_board_dt_compat,
MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig
index 041da51..a2d5bb3 100644
--- a/arch/arm/mach-s3c64xx/Kconfig
+++ b/arch/arm/mach-s3c64xx/Kconfig
@@ -3,16 +3,7 @@
#
# Licensed under GPLv2
-# temporary until we can eliminate all drivers using it.
-config PLAT_S3C64XX
- bool
- depends on ARCH_S3C64XX
- default y
- select PM_GENERIC_DOMAINS
- select SAMSUNG_WAKEMASK
- help
- Base platform code for any Samsung S3C64XX device
-
+if ARCH_S3C64XX
# Configuration options for the S3C6410 CPU
@@ -306,3 +297,5 @@
select SAMSUNG_GPIO_EXTRA128
help
Machine support for the Wolfson Cragganmore S3C6410 variant.
+
+endif
diff --git a/arch/arm/mach-shark/Makefile b/arch/arm/mach-shark/Makefile
deleted file mode 100644
index 2965718..0000000
--- a/arch/arm/mach-shark/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-# Object file lists.
-
-obj-y := core.o dma.o irq.o pci.o leds.o
-obj-m :=
-obj-n :=
-obj- :=
diff --git a/arch/arm/mach-shark/Makefile.boot b/arch/arm/mach-shark/Makefile.boot
deleted file mode 100644
index e40e24e..0000000
--- a/arch/arm/mach-shark/Makefile.boot
+++ /dev/null
@@ -1,2 +0,0 @@
- zreladdr-y += 0x08008000
-
diff --git a/arch/arm/mach-shark/core.c b/arch/arm/mach-shark/core.c
deleted file mode 100644
index 1d32c5e..0000000
--- a/arch/arm/mach-shark/core.c
+++ /dev/null
@@ -1,146 +0,0 @@
-/*
- * linux/arch/arm/mach-shark/arch.c
- *
- * Architecture specific stuff.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/sched.h>
-#include <linux/serial_8250.h>
-#include <linux/io.h>
-#include <linux/cpu.h>
-#include <linux/reboot.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/param.h>
-#include <asm/system_misc.h>
-
-#include <asm/mach/map.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#define ROMCARD_SIZE 0x08000000
-#define ROMCARD_START 0x10000000
-
-static void shark_restart(enum reboot_mode mode, const char *cmd)
-{
- short temp;
- /* Reset the Machine via pc[3] of the sequoia chipset */
- outw(0x09,0x24);
- temp=inw(0x26);
- temp = temp | (1<<3) | (1<<10);
- outw(0x09,0x24);
- outw(temp,0x26);
-}
-
-static struct plat_serial8250_port serial_platform_data[] = {
- {
- .iobase = 0x3f8,
- .irq = 4,
- .uartclk = 1843200,
- .regshift = 0,
- .iotype = UPIO_PORT,
- .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
- },
- {
- .iobase = 0x2f8,
- .irq = 3,
- .uartclk = 1843200,
- .regshift = 0,
- .iotype = UPIO_PORT,
- .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
- },
- { },
-};
-
-static struct platform_device serial_device = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM,
- .dev = {
- .platform_data = serial_platform_data,
- },
-};
-
-static struct resource rtc_resources[] = {
- [0] = {
- .start = 0x70,
- .end = 0x73,
- .flags = IORESOURCE_IO,
- },
- [1] = {
- .start = IRQ_ISA_RTC_ALARM,
- .end = IRQ_ISA_RTC_ALARM,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static struct platform_device rtc_device = {
- .name = "rtc_cmos",
- .id = -1,
- .resource = rtc_resources,
- .num_resources = ARRAY_SIZE(rtc_resources),
-};
-
-static int __init shark_init(void)
-{
- int ret;
-
- if (machine_is_shark())
- {
- ret = platform_device_register(&rtc_device);
- if (ret) printk(KERN_ERR "Unable to register RTC device: %d\n", ret);
- ret = platform_device_register(&serial_device);
- if (ret) printk(KERN_ERR "Unable to register Serial device: %d\n", ret);
- }
- return 0;
-}
-
-arch_initcall(shark_init);
-
-extern void shark_init_irq(void);
-
-#define IRQ_TIMER 0
-#define HZ_TIME ((1193180 + HZ/2) / HZ)
-
-static irqreturn_t
-shark_timer_interrupt(int irq, void *dev_id)
-{
- timer_tick();
- return IRQ_HANDLED;
-}
-
-static struct irqaction shark_timer_irq = {
- .name = "Shark Timer Tick",
- .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
- .handler = shark_timer_interrupt,
-};
-
-/*
- * Set up timer interrupt, and return the current time in seconds.
- */
-static void __init shark_timer_init(void)
-{
- outb(0x34, 0x43); /* binary, mode 0, LSB/MSB, Ch 0 */
- outb(HZ_TIME & 0xff, 0x40); /* LSB of count */
- outb(HZ_TIME >> 8, 0x40);
-
- setup_irq(IRQ_TIMER, &shark_timer_irq);
-}
-
-static void shark_init_early(void)
-{
- cpu_idle_poll_ctrl(true);
-}
-
-MACHINE_START(SHARK, "Shark")
- /* Maintainer: Alexander Schulz */
- .atag_offset = 0x3000,
- .init_early = shark_init_early,
- .init_irq = shark_init_irq,
- .init_time = shark_timer_init,
- .dma_zone_size = SZ_4M,
- .restart = shark_restart,
-MACHINE_END
diff --git a/arch/arm/mach-shark/dma.c b/arch/arm/mach-shark/dma.c
deleted file mode 100644
index 10b5b8b..0000000
--- a/arch/arm/mach-shark/dma.c
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * linux/arch/arm/mach-shark/dma.c
- *
- * by Alexander Schulz
- *
- * derived from:
- * arch/arm/kernel/dma-ebsa285.c
- * Copyright (C) 1998 Phil Blundell
- */
-
-#include <linux/init.h>
-
-#include <asm/dma.h>
-#include <asm/mach/dma.h>
-
-static int __init shark_dma_init(void)
-{
-#ifdef CONFIG_ISA_DMA
- isa_init_dma();
-#endif
- return 0;
-}
-core_initcall(shark_dma_init);
diff --git a/arch/arm/mach-shark/include/mach/debug-macro.S b/arch/arm/mach-shark/include/mach/debug-macro.S
deleted file mode 100644
index d129119..0000000
--- a/arch/arm/mach-shark/include/mach/debug-macro.S
+++ /dev/null
@@ -1,34 +0,0 @@
-/* arch/arm/mach-shark/include/mach/debug-macro.S
- *
- * Debugging macro include header
- *
- * Copyright (C) 1994-1999 Russell King
- * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
- .macro addruart, rp, rv, tmp
- mov \rp, #0x3f8
- orr \rv, \rp, #0xfe000000
- orr \rv, \rv, #0x00e00000
- orr \rp, \rp, #0x40000000
- .endm
-
- .macro senduart,rd,rx
- strb \rd, [\rx]
- .endm
-
- .macro waituart,rd,rx
- .endm
-
- .macro busyuart,rd,rx
- mov \rd, #0
-1001: add \rd, \rd, #1
- teq \rd, #0x10000
- bne 1001b
- .endm
-
diff --git a/arch/arm/mach-shark/include/mach/entry-macro.S b/arch/arm/mach-shark/include/mach/entry-macro.S
deleted file mode 100644
index c9e49f0..0000000
--- a/arch/arm/mach-shark/include/mach/entry-macro.S
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * arch/arm/mach-shark/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for Shark platform
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
- .macro get_irqnr_preamble, base, tmp
- mov \base, #0xfe000000
- orr \base, \base, #0x00e00000
- .endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
-
- mov \irqstat, #0x0C
- strb \irqstat, [\base, #0x20] @outb(0x0C, 0x20) /* Poll command */
- ldrb \irqnr, [\base, #0x20] @irq = inb(0x20) & 7
- and \irqstat, \irqnr, #0x80
- teq \irqstat, #0
- beq 43f
- and \irqnr, \irqnr, #7
- teq \irqnr, #2
- bne 44f
-43: mov \irqstat, #0x0C
- strb \irqstat, [\base, #0xa0] @outb(0x0C, 0xA0) /* Poll command */
- ldrb \irqnr, [\base, #0xa0] @irq = (inb(0xA0) & 7) + 8
- and \irqstat, \irqnr, #0x80
- teq \irqstat, #0
- beq 44f
- and \irqnr, \irqnr, #7
- add \irqnr, \irqnr, #8
-44: teq \irqstat, #0
- .endm
-
diff --git a/arch/arm/mach-shark/include/mach/framebuffer.h b/arch/arm/mach-shark/include/mach/framebuffer.h
deleted file mode 100644
index 84a5bf6..0000000
--- a/arch/arm/mach-shark/include/mach/framebuffer.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * arch/arm/mach-shark/include/mach/framebuffer.h
- *
- * by Alexander Schulz
- *
- */
-
-#ifndef __ASM_ARCH_FRAMEBUFFER_H
-#define __ASM_ARCH_FRAMEBUFFER_H
-
-/* defines for the Framebuffer */
-#define FB_START 0x06000000
-#define FB_SIZE 0x01000000
-
-#endif
-
diff --git a/arch/arm/mach-shark/include/mach/hardware.h b/arch/arm/mach-shark/include/mach/hardware.h
deleted file mode 100644
index 663f952..0000000
--- a/arch/arm/mach-shark/include/mach/hardware.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * arch/arm/mach-shark/include/mach/hardware.h
- *
- * by Alexander Schulz
- *
- * derived from:
- * arch/arm/mach-ebsa110/include/mach/hardware.h
- * Copyright (C) 1996-1999 Russell King.
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#define UNCACHEABLE_ADDR 0xdf010000
-
-#endif
-
diff --git a/arch/arm/mach-shark/include/mach/irqs.h b/arch/arm/mach-shark/include/mach/irqs.h
deleted file mode 100644
index c8e8a4e..0000000
--- a/arch/arm/mach-shark/include/mach/irqs.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * arch/arm/mach-shark/include/mach/irqs.h
- *
- * by Alexander Schulz
- */
-
-#define NR_IRQS 16
-
-#define IRQ_ISA_KEYBOARD 1
-#define IRQ_ISA_RTC_ALARM 8
-#define I8042_KBD_IRQ 1
-#define I8042_AUX_IRQ 12
-#define IRQ_HARDDISK 14
diff --git a/arch/arm/mach-shark/include/mach/isa-dma.h b/arch/arm/mach-shark/include/mach/isa-dma.h
deleted file mode 100644
index 96c43b8..0000000
--- a/arch/arm/mach-shark/include/mach/isa-dma.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * arch/arm/mach-shark/include/mach/isa-dma.h
- *
- * by Alexander Schulz
- */
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-#define MAX_DMA_CHANNELS 8
-#define DMA_ISA_CASCADE 4
-
-#endif /* _ASM_ARCH_DMA_H */
-
diff --git a/arch/arm/mach-shark/include/mach/memory.h b/arch/arm/mach-shark/include/mach/memory.h
deleted file mode 100644
index 1cf8d69..0000000
--- a/arch/arm/mach-shark/include/mach/memory.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * arch/arm/mach-shark/include/mach/memory.h
- *
- * by Alexander Schulz
- *
- * derived from:
- * arch/arm/mach-ebsa110/include/mach/memory.h
- * Copyright (c) 1996-1999 Russell King.
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#include <asm/sizes.h>
-
-/*
- * Physical DRAM offset.
- */
-#define PLAT_PHYS_OFFSET UL(0x08000000)
-
-/*
- * Cache flushing area
- */
-#define FLUSH_BASE_PHYS 0x80000000
-#define FLUSH_BASE 0xdf000000
-
-#endif
diff --git a/arch/arm/mach-shark/include/mach/timex.h b/arch/arm/mach-shark/include/mach/timex.h
deleted file mode 100644
index bb6eeae..0000000
--- a/arch/arm/mach-shark/include/mach/timex.h
+++ /dev/null
@@ -1,7 +0,0 @@
-/*
- * arch/arm/mach-shark/include/mach/timex.h
- *
- * by Alexander Schulz
- */
-
-#define CLOCK_TICK_RATE 1193180
diff --git a/arch/arm/mach-shark/include/mach/uncompress.h b/arch/arm/mach-shark/include/mach/uncompress.h
deleted file mode 100644
index a168435..0000000
--- a/arch/arm/mach-shark/include/mach/uncompress.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * arch/arm/mach-shark/include/mach/uncompress.h
- * by Alexander Schulz
- *
- * derived from:
- * arch/arm/mach-footbridge/include/mach/uncompress.h
- * Copyright (C) 1996,1997,1998 Russell King
- */
-
-#define SERIAL_BASE ((volatile unsigned char *)0x400003f8)
-
-static inline void putc(int c)
-{
- volatile int t;
-
- SERIAL_BASE[0] = c;
- t=0x10000;
- while (t--);
-}
-
-static inline void flush(void)
-{
-}
-
-#ifdef DEBUG
-static void putn(unsigned long z)
-{
- int i;
- char x;
-
- putc('0');
- putc('x');
- for (i=0;i<8;i++) {
- x='0'+((z>>((7-i)*4))&0xf);
- if (x>'9') x=x-'0'+'A'-10;
- putc(x);
- }
-}
-
-static void putr()
-{
- putc('\n');
- putc('\r');
-}
-#endif
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
diff --git a/arch/arm/mach-shark/irq.c b/arch/arm/mach-shark/irq.c
deleted file mode 100644
index 5dce13e..0000000
--- a/arch/arm/mach-shark/irq.c
+++ /dev/null
@@ -1,108 +0,0 @@
-/*
- * linux/arch/arm/mach-shark/irq.c
- *
- * by Alexander Schulz
- *
- * derived from linux/arch/ppc/kernel/i8259.c and:
- * arch/arm/mach-ebsa110/include/mach/irq.h
- * Copyright (C) 1996-1998 Russell King
- */
-
-#include <linux/init.h>
-#include <linux/fs.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-
-#include <asm/irq.h>
-#include <asm/mach/irq.h>
-
-/*
- * 8259A PIC functions to handle ISA devices:
- */
-
-/*
- * This contains the irq mask for both 8259A irq controllers,
- * Let through the cascade-interrupt no. 2 (ff-(1<<2)==fb)
- */
-static unsigned char cached_irq_mask[2] = { 0xfb, 0xff };
-
-/*
- * These have to be protected by the irq controller spinlock
- * before being called.
- */
-static void shark_disable_8259A_irq(struct irq_data *d)
-{
- unsigned int mask;
- if (d->irq<8) {
- mask = 1 << d->irq;
- cached_irq_mask[0] |= mask;
- outb(cached_irq_mask[1],0xA1);
- } else {
- mask = 1 << (d->irq-8);
- cached_irq_mask[1] |= mask;
- outb(cached_irq_mask[0],0x21);
- }
-}
-
-static void shark_enable_8259A_irq(struct irq_data *d)
-{
- unsigned int mask;
- if (d->irq<8) {
- mask = ~(1 << d->irq);
- cached_irq_mask[0] &= mask;
- outb(cached_irq_mask[0],0x21);
- } else {
- mask = ~(1 << (d->irq-8));
- cached_irq_mask[1] &= mask;
- outb(cached_irq_mask[1],0xA1);
- }
-}
-
-static void shark_ack_8259A_irq(struct irq_data *d){}
-
-static irqreturn_t bogus_int(int irq, void *dev_id)
-{
- printk("Got interrupt %i!\n",irq);
- return IRQ_NONE;
-}
-
-static struct irqaction cascade;
-
-static struct irq_chip fb_chip = {
- .name = "XT-PIC",
- .irq_ack = shark_ack_8259A_irq,
- .irq_mask = shark_disable_8259A_irq,
- .irq_unmask = shark_enable_8259A_irq,
-};
-
-void __init shark_init_irq(void)
-{
- int irq;
-
- for (irq = 0; irq < NR_IRQS; irq++) {
- irq_set_chip_and_handler(irq, &fb_chip, handle_edge_irq);
- set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
- }
-
- /* init master interrupt controller */
- outb(0x11, 0x20); /* Start init sequence, edge triggered (level: 0x19)*/
- outb(0x00, 0x21); /* Vector base */
- outb(0x04, 0x21); /* Cascade (slave) on IRQ2 */
- outb(0x03, 0x21); /* Select 8086 mode , auto eoi*/
- outb(0x0A, 0x20);
- /* init slave interrupt controller */
- outb(0x11, 0xA0); /* Start init sequence, edge triggered */
- outb(0x08, 0xA1); /* Vector base */
- outb(0x02, 0xA1); /* Cascade (slave) on IRQ2 */
- outb(0x03, 0xA1); /* Select 8086 mode, auto eoi */
- outb(0x0A, 0xA0);
- outb(cached_irq_mask[1],0xA1);
- outb(cached_irq_mask[0],0x21);
- //request_region(0x20,0x2,"pic1");
- //request_region(0xA0,0x2,"pic2");
-
- cascade.handler = bogus_int;
- cascade.name = "cascade";
- setup_irq(2,&cascade);
-}
-
diff --git a/arch/arm/mach-shark/leds.c b/arch/arm/mach-shark/leds.c
deleted file mode 100644
index 081c778..0000000
--- a/arch/arm/mach-shark/leds.c
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
- * DIGITAL Shark LED control routines.
- *
- * Driver for the 3 user LEDs found on the Shark
- * Based on Versatile and RealView machine LED code
- *
- * License terms: GNU General Public License (GPL) version 2
- * Author: Bryan Wu <bryan.wu@canonical.com>
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/ioport.h>
-#include <linux/slab.h>
-#include <linux/leds.h>
-
-#include <asm/mach-types.h>
-
-#if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS)
-struct shark_led {
- struct led_classdev cdev;
- u8 mask;
-};
-
-/*
- * The triggers lines up below will only be used if the
- * LED triggers are compiled in.
- */
-static const struct {
- const char *name;
- const char *trigger;
-} shark_leds[] = {
- { "shark:amber0", "default-on", }, /* Bit 5 */
- { "shark:green", "heartbeat", }, /* Bit 6 */
- { "shark:amber1", "cpu0" }, /* Bit 7 */
-};
-
-static u16 led_reg_read(void)
-{
- outw(0x09, 0x24);
- return inw(0x26);
-}
-
-static void led_reg_write(u16 value)
-{
- outw(0x09, 0x24);
- outw(value, 0x26);
-}
-
-static void shark_led_set(struct led_classdev *cdev,
- enum led_brightness b)
-{
- struct shark_led *led = container_of(cdev,
- struct shark_led, cdev);
- u16 reg = led_reg_read();
-
- if (b != LED_OFF)
- reg |= led->mask;
- else
- reg &= ~led->mask;
-
- led_reg_write(reg);
-}
-
-static enum led_brightness shark_led_get(struct led_classdev *cdev)
-{
- struct shark_led *led = container_of(cdev,
- struct shark_led, cdev);
- u16 reg = led_reg_read();
-
- return (reg & led->mask) ? LED_FULL : LED_OFF;
-}
-
-static int __init shark_leds_init(void)
-{
- int i;
- u16 reg;
-
- if (!machine_is_shark())
- return -ENODEV;
-
- for (i = 0; i < ARRAY_SIZE(shark_leds); i++) {
- struct shark_led *led;
-
- led = kzalloc(sizeof(*led), GFP_KERNEL);
- if (!led)
- break;
-
- led->cdev.name = shark_leds[i].name;
- led->cdev.brightness_set = shark_led_set;
- led->cdev.brightness_get = shark_led_get;
- led->cdev.default_trigger = shark_leds[i].trigger;
-
- /* Count in 5 bits offset */
- led->mask = BIT(i + 5);
-
- if (led_classdev_register(NULL, &led->cdev) < 0) {
- kfree(led);
- break;
- }
- }
-
- /* Make LEDs independent of power-state */
- request_region(0x24, 4, "led_reg");
- reg = led_reg_read();
- reg |= 1 << 10;
- led_reg_write(reg);
-
- return 0;
-}
-
-/*
- * Since we may have triggers on any subsystem, defer registration
- * until after subsystem_init.
- */
-fs_initcall(shark_leds_init);
-#endif
diff --git a/arch/arm/mach-shark/pci.c b/arch/arm/mach-shark/pci.c
deleted file mode 100644
index 6d91a91..0000000
--- a/arch/arm/mach-shark/pci.c
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * linux/arch/arm/mach-shark/pci.c
- *
- * PCI bios-type initialisation for PCI machines
- *
- * Bits taken from various places.
- */
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <video/vga.h>
-
-#include <asm/irq.h>
-#include <asm/mach/pci.h>
-#include <asm/mach-types.h>
-
-#define IO_START 0x40000000
-
-static int __init shark_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
- if (dev->bus->number == 0)
- if (dev->devfn == 0)
- return 255;
- else
- return 11;
- else
- return 255;
-}
-
-extern void __init via82c505_preinit(void);
-
-static struct hw_pci shark_pci __initdata = {
- .setup = via82c505_setup,
- .map_irq = shark_map_irq,
- .nr_controllers = 1,
- .ops = &via82c505_ops,
- .preinit = via82c505_preinit,
-};
-
-static int __init shark_pci_init(void)
-{
- if (!machine_is_shark())
- return -ENODEV;
-
- pcibios_min_io = 0x6000;
- pcibios_min_mem = 0x50000000;
- vga_base = 0xe8000000;
-
- pci_ioremap_io(0, IO_START);
-
- pci_common_init(&shark_pci);
-
- return 0;
-}
-
-subsys_initcall(shark_pci_init);
diff --git a/arch/arm/mach-shmobile/board-ape6evm-reference.c b/arch/arm/mach-shmobile/board-ape6evm-reference.c
index a23fa71..3276afc 100644
--- a/arch/arm/mach-shmobile/board-ape6evm-reference.c
+++ b/arch/arm/mach-shmobile/board-ape6evm-reference.c
@@ -57,7 +57,7 @@
};
DT_MACHINE_START(APE6EVM_DT, "ape6evm")
- .init_early = r8a73a4_init_delay,
+ .init_early = r8a73a4_init_early,
.init_machine = ape6evm_add_standard_devices,
.dt_compat = ape6evm_boards_compat_dt,
MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-ape6evm.c b/arch/arm/mach-shmobile/board-ape6evm.c
index 24b87eea..1e9313a 100644
--- a/arch/arm/mach-shmobile/board-ape6evm.c
+++ b/arch/arm/mach-shmobile/board-ape6evm.c
@@ -86,7 +86,7 @@
GPIO_KEY(KEY_VOLUMEDOWN, 329, "S21"),
};
-static struct __initdata gpio_keys_platform_data ape6evm_keys_pdata = {
+static struct gpio_keys_platform_data ape6evm_keys_pdata __initdata = {
.buttons = gpio_buttons,
.nbuttons = ARRAY_SIZE(gpio_buttons),
};
@@ -240,7 +240,7 @@
};
DT_MACHINE_START(APE6EVM_DT, "ape6evm")
- .init_early = r8a73a4_init_delay,
+ .init_early = r8a73a4_init_early,
.init_machine = ape6evm_add_standard_devices,
.dt_compat = ape6evm_boards_compat_dt,
MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-bockw.c b/arch/arm/mach-shmobile/board-bockw.c
index 6b9faf3..f2bf61b 100644
--- a/arch/arm/mach-shmobile/board-bockw.c
+++ b/arch/arm/mach-shmobile/board-bockw.c
@@ -101,6 +101,12 @@
DEFINE_RES_IRQ(gic_iid(0x77)),
};
+/* Ether */
+static struct resource ether_resources[] __initdata = {
+ DEFINE_RES_MEM(0xfde00000, 0x400),
+ DEFINE_RES_IRQ(gic_iid(0x89)),
+};
+
static struct sh_eth_plat_data ether_platform_data __initdata = {
.phy = 0x01,
.edmac_endian = EDMAC_LITTLE_ENDIAN,
@@ -162,10 +168,6 @@
MMC_CAP_NEEDS_POLL,
};
-static struct rcar_vin_platform_data vin_platform_data __initdata = {
- .flags = RCAR_VIN_BT656,
-};
-
/* In the default configuration both decoders reside on I2C bus 0 */
#define BOCKW_CAMERA(idx) \
static struct i2c_board_info camera##idx##_info = { \
@@ -181,6 +183,30 @@
BOCKW_CAMERA(0);
BOCKW_CAMERA(1);
+/* VIN */
+static struct rcar_vin_platform_data vin_platform_data __initdata = {
+ .flags = RCAR_VIN_BT656,
+};
+
+#define R8A7778_VIN(idx) \
+static struct resource vin##idx##_resources[] __initdata = { \
+ DEFINE_RES_MEM(0xffc50000 + 0x1000 * (idx), 0x1000), \
+ DEFINE_RES_IRQ(gic_iid(0x5a)), \
+}; \
+ \
+static struct platform_device_info vin##idx##_info __initdata = { \
+ .parent = &platform_bus, \
+ .name = "r8a7778-vin", \
+ .id = idx, \
+ .res = vin##idx##_resources, \
+ .num_res = ARRAY_SIZE(vin##idx##_resources), \
+ .dma_mask = DMA_BIT_MASK(32), \
+ .data = &vin_platform_data, \
+ .size_data = sizeof(vin_platform_data), \
+}
+R8A7778_VIN(0);
+R8A7778_VIN(1);
+
static const struct pinctrl_map bockw_pinctrl_map[] = {
/* Ether */
PIN_MAP_MUX_GROUP_DEFAULT("r8a777x-ether", "pfc-r8a7778",
@@ -235,11 +261,17 @@
r8a7778_clock_init();
r8a7778_init_irq_extpin(1);
r8a7778_add_standard_devices();
- r8a7778_add_ether_device(ðer_platform_data);
- r8a7778_add_vin_device(0, &vin_platform_data);
+
+ platform_device_register_resndata(&platform_bus, "r8a777x-ether", -1,
+ ether_resources,
+ ARRAY_SIZE(ether_resources),
+ ðer_platform_data,
+ sizeof(ether_platform_data));
+
+ platform_device_register_full(&vin0_info);
/* VIN1 has a pin conflict with Ether */
if (!IS_ENABLED(CONFIG_SH_ETH))
- r8a7778_add_vin_device(1, &vin_platform_data);
+ platform_device_register_full(&vin1_info);
platform_device_register_data(&platform_bus, "soc-camera-pdrv", 0,
&iclink0_ml86v7667,
sizeof(iclink0_ml86v7667));
diff --git a/arch/arm/mach-shmobile/board-lager-reference.c b/arch/arm/mach-shmobile/board-lager-reference.c
index 9c316a1..2856f51 100644
--- a/arch/arm/mach-shmobile/board-lager-reference.c
+++ b/arch/arm/mach-shmobile/board-lager-reference.c
@@ -38,7 +38,7 @@
};
DT_MACHINE_START(LAGER_DT, "lager")
- .init_early = r8a7790_init_delay,
+ .init_early = r8a7790_init_early,
.init_machine = lager_add_standard_devices,
.init_time = r8a7790_timer_init,
.dt_compat = lager_boards_compat_dt,
diff --git a/arch/arm/mach-shmobile/board-lager.c b/arch/arm/mach-shmobile/board-lager.c
index 5930af8..66edb7e 100644
--- a/arch/arm/mach-shmobile/board-lager.c
+++ b/arch/arm/mach-shmobile/board-lager.c
@@ -56,7 +56,7 @@
},
};
-static __initdata struct gpio_led_platform_data lager_leds_pdata = {
+static const struct gpio_led_platform_data lager_leds_pdata __initconst = {
.leds = lager_leds,
.num_leds = ARRAY_SIZE(lager_leds),
};
@@ -72,7 +72,7 @@
GPIO_KEY(KEY_1, RCAR_GP_PIN(1, 14), "SW2-pin1"),
};
-static __initdata struct gpio_keys_platform_data lager_keys_pdata = {
+static const struct gpio_keys_platform_data lager_keys_pdata __initconst = {
.buttons = gpio_buttons,
.nbuttons = ARRAY_SIZE(gpio_buttons),
};
@@ -84,24 +84,24 @@
};
/* MMCIF */
-static struct sh_mmcif_plat_data mmcif1_pdata __initdata = {
+static const struct sh_mmcif_plat_data mmcif1_pdata __initconst = {
.caps = MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE,
};
-static struct resource mmcif1_resources[] __initdata = {
+static const struct resource mmcif1_resources[] __initconst = {
DEFINE_RES_MEM_NAMED(0xee220000, 0x80, "MMCIF1"),
DEFINE_RES_IRQ(gic_spi(170)),
};
/* Ether */
-static struct sh_eth_plat_data ether_pdata __initdata = {
+static const struct sh_eth_plat_data ether_pdata __initconst = {
.phy = 0x1,
.edmac_endian = EDMAC_LITTLE_ENDIAN,
.phy_interface = PHY_INTERFACE_MODE_RMII,
.ether_link_active_low = 1,
};
-static struct resource ether_resources[] __initdata = {
+static const struct resource ether_resources[] __initconst = {
DEFINE_RES_MEM(0xee700000, 0x400),
DEFINE_RES_IRQ(gic_spi(162)),
};
@@ -180,13 +180,13 @@
phy_register_fixup_for_id("r8a7790-ether-ff:01", lager_ksz8041_fixup);
}
-static const char *lager_boards_compat_dt[] __initdata = {
+static const char * const lager_boards_compat_dt[] __initconst = {
"renesas,lager",
NULL,
};
DT_MACHINE_START(LAGER_DT, "lager")
- .init_early = r8a7790_init_delay,
+ .init_early = r8a7790_init_early,
.init_time = r8a7790_timer_init,
.init_machine = lager_init,
.dt_compat = lager_boards_compat_dt,
diff --git a/arch/arm/mach-shmobile/include/mach/r8a73a4.h b/arch/arm/mach-shmobile/include/mach/r8a73a4.h
index f3a9b70..5214338 100644
--- a/arch/arm/mach-shmobile/include/mach/r8a73a4.h
+++ b/arch/arm/mach-shmobile/include/mach/r8a73a4.h
@@ -5,6 +5,6 @@
void r8a73a4_add_dt_devices(void);
void r8a73a4_clock_init(void);
void r8a73a4_pinmux_init(void);
-void r8a73a4_init_delay(void);
+void r8a73a4_init_early(void);
#endif /* __ASM_R8A73A4_H__ */
diff --git a/arch/arm/mach-shmobile/include/mach/r8a7778.h b/arch/arm/mach-shmobile/include/mach/r8a7778.h
index adfcf51..48933def 100644
--- a/arch/arm/mach-shmobile/include/mach/r8a7778.h
+++ b/arch/arm/mach-shmobile/include/mach/r8a7778.h
@@ -23,9 +23,6 @@
extern void r8a7778_add_standard_devices(void);
extern void r8a7778_add_standard_devices_dt(void);
-extern void r8a7778_add_ether_device(struct sh_eth_plat_data *pdata);
-extern void r8a7778_add_vin_device(int id,
- struct rcar_vin_platform_data *pdata);
extern void r8a7778_add_dt_devices(void);
extern void r8a7778_init_late(void);
diff --git a/arch/arm/mach-shmobile/include/mach/r8a7790.h b/arch/arm/mach-shmobile/include/mach/r8a7790.h
index 788d559..177a837 100644
--- a/arch/arm/mach-shmobile/include/mach/r8a7790.h
+++ b/arch/arm/mach-shmobile/include/mach/r8a7790.h
@@ -5,7 +5,7 @@
void r8a7790_add_dt_devices(void);
void r8a7790_clock_init(void);
void r8a7790_pinmux_init(void);
-void r8a7790_init_delay(void);
+void r8a7790_init_early(void);
void r8a7790_timer_init(void);
#define MD(nr) BIT(nr)
diff --git a/arch/arm/mach-shmobile/setup-r8a73a4.c b/arch/arm/mach-shmobile/setup-r8a73a4.c
index 89491700..53a89627 100644
--- a/arch/arm/mach-shmobile/setup-r8a73a4.c
+++ b/arch/arm/mach-shmobile/setup-r8a73a4.c
@@ -207,7 +207,7 @@
r8a73a4_register_thermal();
}
-void __init r8a73a4_init_delay(void)
+void __init r8a73a4_init_early(void)
{
#ifndef CONFIG_ARM_ARCH_TIMER
shmobile_setup_delay(1500, 2, 4); /* Cortex-A15 @ 1500MHz */
@@ -222,7 +222,7 @@
};
DT_MACHINE_START(R8A73A4_DT, "Generic R8A73A4 (Flattened Device Tree)")
- .init_early = r8a73a4_init_delay,
+ .init_early = r8a73a4_init_early,
.dt_compat = r8a73a4_boards_compat_dt,
MACHINE_END
#endif /* CONFIG_USE_OF */
diff --git a/arch/arm/mach-shmobile/setup-r8a7778.c b/arch/arm/mach-shmobile/setup-r8a7778.c
index 6a2657e..468ee65 100644
--- a/arch/arm/mach-shmobile/setup-r8a7778.c
+++ b/arch/arm/mach-shmobile/setup-r8a7778.c
@@ -174,20 +174,6 @@
USB_PLATFORM_INFO(ehci);
USB_PLATFORM_INFO(ohci);
-/* Ether */
-static struct resource ether_resources[] __initdata = {
- DEFINE_RES_MEM(0xfde00000, 0x400),
- DEFINE_RES_IRQ(gic_iid(0x89)),
-};
-
-void __init r8a7778_add_ether_device(struct sh_eth_plat_data *pdata)
-{
- platform_device_register_resndata(&platform_bus, "r8a777x-ether", -1,
- ether_resources,
- ARRAY_SIZE(ether_resources),
- pdata, sizeof(*pdata));
-}
-
/* PFC/GPIO */
static struct resource pfc_resources[] __initdata = {
DEFINE_RES_MEM(0xfffc0000, 0x118),
@@ -272,7 +258,7 @@
DEFINE_RES_IRQ(gic_iid(0x75)),
};
-void __init r8a7778_register_hspi(int id)
+static void __init r8a7778_register_hspi(int id)
{
BUG_ON(id < 0 || id > 2);
@@ -281,40 +267,6 @@
hspi_resources + (2 * id), 2);
}
-/* VIN */
-#define R8A7778_VIN(idx) \
-static struct resource vin##idx##_resources[] __initdata = { \
- DEFINE_RES_MEM(0xffc50000 + 0x1000 * (idx), 0x1000), \
- DEFINE_RES_IRQ(gic_iid(0x5a)), \
-}; \
- \
-static struct platform_device_info vin##idx##_info __initdata = { \
- .parent = &platform_bus, \
- .name = "r8a7778-vin", \
- .id = idx, \
- .res = vin##idx##_resources, \
- .num_res = ARRAY_SIZE(vin##idx##_resources), \
- .dma_mask = DMA_BIT_MASK(32), \
-}
-
-R8A7778_VIN(0);
-R8A7778_VIN(1);
-
-static struct platform_device_info *vin_info_table[] __initdata = {
- &vin0_info,
- &vin1_info,
-};
-
-void __init r8a7778_add_vin_device(int id, struct rcar_vin_platform_data *pdata)
-{
- BUG_ON(id < 0 || id > 1);
-
- vin_info_table[id]->data = pdata;
- vin_info_table[id]->size_data = sizeof(*pdata);
-
- platform_device_register_full(vin_info_table[id]);
-}
-
void __init r8a7778_add_dt_devices(void)
{
int i;
diff --git a/arch/arm/mach-shmobile/setup-r8a7790.c b/arch/arm/mach-shmobile/setup-r8a7790.c
index d0f5c9f..e0d29a2 100644
--- a/arch/arm/mach-shmobile/setup-r8a7790.c
+++ b/arch/arm/mach-shmobile/setup-r8a7790.c
@@ -31,17 +31,18 @@
#include <mach/r8a7790.h>
#include <asm/mach/arch.h>
-static struct resource pfc_resources[] __initdata = {
+static const struct resource pfc_resources[] __initconst = {
DEFINE_RES_MEM(0xe6060000, 0x250),
};
#define R8A7790_GPIO(idx) \
-static struct resource r8a7790_gpio##idx##_resources[] __initdata = { \
+static const struct resource r8a7790_gpio##idx##_resources[] __initconst = { \
DEFINE_RES_MEM(0xe6050000 + 0x1000 * (idx), 0x50), \
DEFINE_RES_IRQ(gic_spi(4 + (idx))), \
}; \
\
-static struct gpio_rcar_config r8a7790_gpio##idx##_platform_data __initdata = { \
+static const struct gpio_rcar_config \
+r8a7790_gpio##idx##_platform_data __initconst = { \
.gpio_base = 32 * (idx), \
.irq_base = 0, \
.number_of_pins = 32, \
@@ -112,7 +113,7 @@
enum { SCIFA0, SCIFA1, SCIFB0, SCIFB1, SCIFB2, SCIFA2, SCIF0, SCIF1,
HSCIF0, HSCIF1 };
-static struct plat_sci_port scif[] __initdata = {
+static const struct plat_sci_port scif[] __initconst = {
SCIFA_DATA(SCIFA0, 0xe6c40000, gic_spi(144)), /* SCIFA0 */
SCIFA_DATA(SCIFA1, 0xe6c50000, gic_spi(145)), /* SCIFA1 */
SCIFB_DATA(SCIFB0, 0xe6c20000, gic_spi(148)), /* SCIFB0 */
@@ -131,11 +132,11 @@
sizeof(struct plat_sci_port));
}
-static struct renesas_irqc_config irqc0_data __initdata = {
+static const struct renesas_irqc_config irqc0_data __initconst = {
.irq_base = irq_pin(0), /* IRQ0 -> IRQ3 */
};
-static struct resource irqc0_resources[] __initdata = {
+static const struct resource irqc0_resources[] __initconst = {
DEFINE_RES_MEM(0xe61c0000, 0x200), /* IRQC Event Detector Block_0 */
DEFINE_RES_IRQ(gic_spi(0)), /* IRQ0 */
DEFINE_RES_IRQ(gic_spi(1)), /* IRQ1 */
@@ -150,7 +151,7 @@
&irqc##idx##_data, \
sizeof(struct renesas_irqc_config))
-static struct resource thermal_resources[] __initdata = {
+static const struct resource thermal_resources[] __initconst = {
DEFINE_RES_MEM(0xe61f0000, 0x14),
DEFINE_RES_MEM(0xe61f0100, 0x38),
DEFINE_RES_IRQ(gic_spi(69)),
@@ -161,13 +162,13 @@
thermal_resources, \
ARRAY_SIZE(thermal_resources))
-static struct sh_timer_config cmt00_platform_data __initdata = {
+static const struct sh_timer_config cmt00_platform_data __initconst = {
.name = "CMT00",
.timer_bit = 0,
.clockevent_rating = 80,
};
-static struct resource cmt00_resources[] __initdata = {
+static const struct resource cmt00_resources[] __initconst = {
DEFINE_RES_MEM(0xffca0510, 0x0c),
DEFINE_RES_MEM(0xffca0500, 0x04),
DEFINE_RES_IRQ(gic_spi(142)), /* CMT0_0 */
@@ -267,7 +268,7 @@
clocksource_of_init();
}
-void __init r8a7790_init_delay(void)
+void __init r8a7790_init_early(void)
{
#ifndef CONFIG_ARM_ARCH_TIMER
shmobile_setup_delay(1300, 2, 4); /* Cortex-A15 @ 1300MHz */
@@ -276,13 +277,13 @@
#ifdef CONFIG_USE_OF
-static const char *r8a7790_boards_compat_dt[] __initdata = {
+static const char * const r8a7790_boards_compat_dt[] __initconst = {
"renesas,r8a7790",
NULL,
};
DT_MACHINE_START(R8A7790_DT, "Generic R8A7790 (Flattened Device Tree)")
- .init_early = r8a7790_init_delay,
+ .init_early = r8a7790_init_early,
.init_time = r8a7790_timer_init,
.dt_compat = r8a7790_boards_compat_dt,
MACHINE_END
diff --git a/arch/arm/mach-socfpga/Kconfig b/arch/arm/mach-socfpga/Kconfig
index dd86db4..037100a 100644
--- a/arch/arm/mach-socfpga/Kconfig
+++ b/arch/arm/mach-socfpga/Kconfig
@@ -4,7 +4,6 @@
select ARM_AMBA
select ARM_GIC
select CACHE_L2X0
- select CLKDEV_LOOKUP
select COMMON_CLK
select CPU_V7
select DW_APB_TIMER_OF
diff --git a/arch/arm/mach-socfpga/socfpga.c b/arch/arm/mach-socfpga/socfpga.c
index bfce964..dd0d49c 100644
--- a/arch/arm/mach-socfpga/socfpga.c
+++ b/arch/arm/mach-socfpga/socfpga.c
@@ -14,7 +14,6 @@
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
-#include <linux/clk-provider.h>
#include <linux/irqchip.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
@@ -107,7 +106,6 @@
{
l2x0_of_init(0, ~0UL);
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
- of_clk_init(NULL);
socfpga_init_clocks();
}
diff --git a/arch/arm/mach-spear/Kconfig b/arch/arm/mach-spear/Kconfig
index df0d59a..ac1710e6 100644
--- a/arch/arm/mach-spear/Kconfig
+++ b/arch/arm/mach-spear/Kconfig
@@ -7,11 +7,9 @@
default PLAT_SPEAR_SINGLE
select ARCH_REQUIRE_GPIOLIB
select ARM_AMBA
- select CLKDEV_LOOKUP
select CLKSRC_MMIO
select COMMON_CLK
select GENERIC_CLOCKEVENTS
- select HAVE_CLK
if PLAT_SPEAR
diff --git a/arch/arm/mach-sti/board-dt.c b/arch/arm/mach-sti/board-dt.c
index 8fe6f0c..1217fb5 100644
--- a/arch/arm/mach-sti/board-dt.c
+++ b/arch/arm/mach-sti/board-dt.c
@@ -7,9 +7,8 @@
* published by the Free Software Foundation.
*/
-#include <linux/clk-provider.h>
-#include <linux/clocksource.h>
#include <linux/irq.h>
+#include <linux/of_platform.h>
#include <asm/hardware/cache-l2x0.h>
#include <asm/mach/arch.h>
@@ -28,11 +27,10 @@
l2x0_of_init(aux_ctrl, L2X0_AUX_CTRL_MASK);
}
-static void __init stih41x_timer_init(void)
+static void __init stih41x_machine_init(void)
{
- of_clk_init(NULL);
- clocksource_of_init();
stih41x_l2x0_init();
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
static const char *stih41x_dt_match[] __initdata = {
@@ -42,7 +40,7 @@
};
DT_MACHINE_START(STM, "STiH415/416 SoC with Flattened Device Tree")
- .init_time = stih41x_timer_init,
+ .init_machine = stih41x_machine_init,
.smp = smp_ops(sti_smp_ops),
.dt_compat = stih41x_dt_match,
MACHINE_END
diff --git a/arch/arm/mach-sunxi/sunxi.c b/arch/arm/mach-sunxi/sunxi.c
index e79fb34..90dda62 100644
--- a/arch/arm/mach-sunxi/sunxi.c
+++ b/arch/arm/mach-sunxi/sunxi.c
@@ -10,7 +10,6 @@
* warranty of any kind, whether express or implied.
*/
-#include <linux/clocksource.h>
#include <linux/delay.h>
#include <linux/kernel.h>
#include <linux/init.h>
@@ -20,8 +19,6 @@
#include <linux/io.h>
#include <linux/reboot.h>
-#include <linux/clk/sunxi.h>
-
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/system_misc.h>
@@ -116,12 +113,6 @@
arm_pm_restart = of_id->data;
}
-static void __init sunxi_timer_init(void)
-{
- sunxi_init_clocks();
- clocksource_of_init();
-}
-
static void __init sunxi_dt_init(void)
{
sunxi_setup_restart();
@@ -140,6 +131,5 @@
DT_MACHINE_START(SUNXI_DT, "Allwinner A1X (Device Tree)")
.init_machine = sunxi_dt_init,
- .init_time = sunxi_timer_init,
.dt_compat = sunxi_board_dt_compat,
MACHINE_END
diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig
index 67a76f2..56bb6c3 100644
--- a/arch/arm/mach-tegra/Kconfig
+++ b/arch/arm/mach-tegra/Kconfig
@@ -3,7 +3,6 @@
select ARCH_HAS_CPUFREQ
select ARCH_REQUIRE_GPIOLIB
select ARM_GIC
- select CLKDEV_LOOKUP
select CLKSRC_MMIO
select CLKSRC_OF
select COMMON_CLK
@@ -11,7 +10,6 @@
select GENERIC_CLOCKEVENTS
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
- select HAVE_CLK
select HAVE_SMP
select MIGHT_HAVE_CACHE_L2X0
select MIGHT_HAVE_PCI
@@ -53,9 +51,9 @@
config ARCH_TEGRA_114_SOC
bool "Enable support for Tegra114 family"
- select HAVE_ARM_ARCH_TIMER
select ARM_ERRATA_798181
select ARM_L1_CACHE_SHIFT_6
+ select HAVE_ARM_ARCH_TIMER
select PINCTRL_TEGRA114
help
Support for NVIDIA Tegra T114 processor family, based on the
diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile
index e7e5f45..97eb48e 100644
--- a/arch/arm/mach-tegra/Makefile
+++ b/arch/arm/mach-tegra/Makefile
@@ -1,6 +1,5 @@
asflags-y += -march=armv7-a
-obj-y += common.o
obj-y += io.o
obj-y += irq.o
obj-y += fuse.o
diff --git a/arch/arm/mach-tegra/board-paz00.c b/arch/arm/mach-tegra/board-paz00.c
index 740e16f..06f0240 100644
--- a/arch/arm/mach-tegra/board-paz00.c
+++ b/arch/arm/mach-tegra/board-paz00.c
@@ -20,12 +20,11 @@
#include <linux/platform_device.h>
#include <linux/rfkill-gpio.h>
#include "board.h"
-#include "board-paz00.h"
static struct rfkill_gpio_platform_data wifi_rfkill_platform_data = {
.name = "wifi_rfkill",
- .reset_gpio = TEGRA_WIFI_RST,
- .shutdown_gpio = TEGRA_WIFI_PWRN,
+ .reset_gpio = 25, /* PD1 */
+ .shutdown_gpio = 85, /* PK5 */
.type = RFKILL_TYPE_WLAN,
};
diff --git a/arch/arm/mach-tegra/board-paz00.h b/arch/arm/mach-tegra/board-paz00.h
deleted file mode 100644
index 25c08ec..0000000
--- a/arch/arm/mach-tegra/board-paz00.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * arch/arm/mach-tegra/board-paz00.h
- *
- * Copyright (C) 2010 Marc Dietrich <marvin24@gmx.de>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef _MACH_TEGRA_BOARD_PAZ00_H
-#define _MACH_TEGRA_BOARD_PAZ00_H
-
-#include "gpio-names.h"
-
-#define TEGRA_WIFI_PWRN TEGRA_GPIO_PK5
-#define TEGRA_WIFI_RST TEGRA_GPIO_PD1
-
-#endif
diff --git a/arch/arm/mach-tegra/board.h b/arch/arm/mach-tegra/board.h
index db6810d..bcf5dbf 100644
--- a/arch/arm/mach-tegra/board.h
+++ b/arch/arm/mach-tegra/board.h
@@ -25,20 +25,8 @@
#include <linux/types.h>
#include <linux/reboot.h>
-void tegra_assert_system_reset(enum reboot_mode mode, const char *cmd);
-
-void __init tegra_init_early(void);
void __init tegra_map_common_io(void);
void __init tegra_init_irq(void);
-void __init tegra_dt_init_irq(void);
-
-void tegra_init_late(void);
-
-#ifdef CONFIG_DEBUG_FS
-int tegra_clk_debugfs_init(void);
-#else
-static inline int tegra_clk_debugfs_init(void) { return 0; }
-#endif
int __init tegra_powergate_init(void);
#if defined(CONFIG_ARCH_TEGRA_2x_SOC) && defined(CONFIG_DEBUG_FS)
diff --git a/arch/arm/mach-tegra/common.c b/arch/arm/mach-tegra/common.c
deleted file mode 100644
index 94a119a..0000000
--- a/arch/arm/mach-tegra/common.c
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- * arch/arm/mach-tegra/common.c
- *
- * Copyright (c) 2013 NVIDIA Corporation. All rights reserved.
- * Copyright (C) 2010 Google, Inc.
- *
- * Author:
- * Colin Cross <ccross@android.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/reboot.h>
-#include <linux/irqchip.h>
-#include <linux/clk-provider.h>
-
-#include <asm/hardware/cache-l2x0.h>
-
-#include "board.h"
-#include "common.h"
-#include "cpuidle.h"
-#include "fuse.h"
-#include "iomap.h"
-#include "irq.h"
-#include "pmc.h"
-#include "apbio.h"
-#include "sleep.h"
-#include "pm.h"
-#include "reset.h"
-
-/*
- * Storage for debug-macro.S's state.
- *
- * This must be in .data not .bss so that it gets initialized each time the
- * kernel is loaded. The data is declared here rather than debug-macro.S so
- * that multiple inclusions of debug-macro.S point at the same data.
- */
-u32 tegra_uart_config[4] = {
- /* Debug UART initialization required */
- 1,
- /* Debug UART physical address */
- 0,
- /* Debug UART virtual address */
- 0,
- /* Scratch space for debug macro */
- 0,
-};
-
-#ifdef CONFIG_OF
-void __init tegra_dt_init_irq(void)
-{
- of_clk_init(NULL);
- tegra_pmc_init();
- tegra_init_irq();
- irqchip_init();
- tegra_legacy_irq_syscore_init();
-}
-#endif
-
-void tegra_assert_system_reset(enum reboot_mode mode, const char *cmd)
-{
- void __iomem *reset = IO_ADDRESS(TEGRA_PMC_BASE + 0);
- u32 reg;
-
- reg = readl_relaxed(reset);
- reg |= 0x10;
- writel_relaxed(reg, reset);
-}
-
-static void __init tegra_init_cache(void)
-{
-#ifdef CONFIG_CACHE_L2X0
- int ret;
- void __iomem *p = IO_ADDRESS(TEGRA_ARM_PERIF_BASE) + 0x3000;
- u32 aux_ctrl, cache_type;
-
- cache_type = readl(p + L2X0_CACHE_TYPE);
- aux_ctrl = (cache_type & 0x700) << (17-8);
- aux_ctrl |= 0x7C400001;
-
- ret = l2x0_of_init(aux_ctrl, 0x8200c3fe);
- if (!ret)
- l2x0_saved_regs_addr = virt_to_phys(&l2x0_saved_regs);
-#endif
-
-}
-
-void __init tegra_init_early(void)
-{
- tegra_cpu_reset_handler_init();
- tegra_apb_io_init();
- tegra_init_fuse();
- tegra_init_cache();
- tegra_powergate_init();
- tegra_hotplug_init();
-}
-
-void __init tegra_init_late(void)
-{
- tegra_init_suspend();
- tegra_cpuidle_init();
- tegra_powergate_debugfs_init();
-}
diff --git a/arch/arm/mach-tegra/fuse.c b/arch/arm/mach-tegra/fuse.c
index e035cd2..f3b5d0d 100644
--- a/arch/arm/mach-tegra/fuse.c
+++ b/arch/arm/mach-tegra/fuse.c
@@ -112,7 +112,7 @@
return readl_relaxed(IO_ADDRESS(TEGRA_APB_MISC_BASE) + 0x804);
}
-void tegra_init_fuse(void)
+void __init tegra_init_fuse(void)
{
u32 id;
diff --git a/arch/arm/mach-tegra/gpio-names.h b/arch/arm/mach-tegra/gpio-names.h
deleted file mode 100644
index f28220a..0000000
--- a/arch/arm/mach-tegra/gpio-names.h
+++ /dev/null
@@ -1,247 +0,0 @@
-/*
- * arch/arm/mach-tegra/include/mach/gpio-names.h
- *
- * Copyright (c) 2010 Google, Inc
- *
- * Author:
- * Erik Gilling <konkers@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef __MACH_TEGRA_GPIO_NAMES_H
-#define __MACH_TEGRA_GPIO_NAMES_H
-
-#define TEGRA_GPIO_PA0 0
-#define TEGRA_GPIO_PA1 1
-#define TEGRA_GPIO_PA2 2
-#define TEGRA_GPIO_PA3 3
-#define TEGRA_GPIO_PA4 4
-#define TEGRA_GPIO_PA5 5
-#define TEGRA_GPIO_PA6 6
-#define TEGRA_GPIO_PA7 7
-#define TEGRA_GPIO_PB0 8
-#define TEGRA_GPIO_PB1 9
-#define TEGRA_GPIO_PB2 10
-#define TEGRA_GPIO_PB3 11
-#define TEGRA_GPIO_PB4 12
-#define TEGRA_GPIO_PB5 13
-#define TEGRA_GPIO_PB6 14
-#define TEGRA_GPIO_PB7 15
-#define TEGRA_GPIO_PC0 16
-#define TEGRA_GPIO_PC1 17
-#define TEGRA_GPIO_PC2 18
-#define TEGRA_GPIO_PC3 19
-#define TEGRA_GPIO_PC4 20
-#define TEGRA_GPIO_PC5 21
-#define TEGRA_GPIO_PC6 22
-#define TEGRA_GPIO_PC7 23
-#define TEGRA_GPIO_PD0 24
-#define TEGRA_GPIO_PD1 25
-#define TEGRA_GPIO_PD2 26
-#define TEGRA_GPIO_PD3 27
-#define TEGRA_GPIO_PD4 28
-#define TEGRA_GPIO_PD5 29
-#define TEGRA_GPIO_PD6 30
-#define TEGRA_GPIO_PD7 31
-#define TEGRA_GPIO_PE0 32
-#define TEGRA_GPIO_PE1 33
-#define TEGRA_GPIO_PE2 34
-#define TEGRA_GPIO_PE3 35
-#define TEGRA_GPIO_PE4 36
-#define TEGRA_GPIO_PE5 37
-#define TEGRA_GPIO_PE6 38
-#define TEGRA_GPIO_PE7 39
-#define TEGRA_GPIO_PF0 40
-#define TEGRA_GPIO_PF1 41
-#define TEGRA_GPIO_PF2 42
-#define TEGRA_GPIO_PF3 43
-#define TEGRA_GPIO_PF4 44
-#define TEGRA_GPIO_PF5 45
-#define TEGRA_GPIO_PF6 46
-#define TEGRA_GPIO_PF7 47
-#define TEGRA_GPIO_PG0 48
-#define TEGRA_GPIO_PG1 49
-#define TEGRA_GPIO_PG2 50
-#define TEGRA_GPIO_PG3 51
-#define TEGRA_GPIO_PG4 52
-#define TEGRA_GPIO_PG5 53
-#define TEGRA_GPIO_PG6 54
-#define TEGRA_GPIO_PG7 55
-#define TEGRA_GPIO_PH0 56
-#define TEGRA_GPIO_PH1 57
-#define TEGRA_GPIO_PH2 58
-#define TEGRA_GPIO_PH3 59
-#define TEGRA_GPIO_PH4 60
-#define TEGRA_GPIO_PH5 61
-#define TEGRA_GPIO_PH6 62
-#define TEGRA_GPIO_PH7 63
-#define TEGRA_GPIO_PI0 64
-#define TEGRA_GPIO_PI1 65
-#define TEGRA_GPIO_PI2 66
-#define TEGRA_GPIO_PI3 67
-#define TEGRA_GPIO_PI4 68
-#define TEGRA_GPIO_PI5 69
-#define TEGRA_GPIO_PI6 70
-#define TEGRA_GPIO_PI7 71
-#define TEGRA_GPIO_PJ0 72
-#define TEGRA_GPIO_PJ1 73
-#define TEGRA_GPIO_PJ2 74
-#define TEGRA_GPIO_PJ3 75
-#define TEGRA_GPIO_PJ4 76
-#define TEGRA_GPIO_PJ5 77
-#define TEGRA_GPIO_PJ6 78
-#define TEGRA_GPIO_PJ7 79
-#define TEGRA_GPIO_PK0 80
-#define TEGRA_GPIO_PK1 81
-#define TEGRA_GPIO_PK2 82
-#define TEGRA_GPIO_PK3 83
-#define TEGRA_GPIO_PK4 84
-#define TEGRA_GPIO_PK5 85
-#define TEGRA_GPIO_PK6 86
-#define TEGRA_GPIO_PK7 87
-#define TEGRA_GPIO_PL0 88
-#define TEGRA_GPIO_PL1 89
-#define TEGRA_GPIO_PL2 90
-#define TEGRA_GPIO_PL3 91
-#define TEGRA_GPIO_PL4 92
-#define TEGRA_GPIO_PL5 93
-#define TEGRA_GPIO_PL6 94
-#define TEGRA_GPIO_PL7 95
-#define TEGRA_GPIO_PM0 96
-#define TEGRA_GPIO_PM1 97
-#define TEGRA_GPIO_PM2 98
-#define TEGRA_GPIO_PM3 99
-#define TEGRA_GPIO_PM4 100
-#define TEGRA_GPIO_PM5 101
-#define TEGRA_GPIO_PM6 102
-#define TEGRA_GPIO_PM7 103
-#define TEGRA_GPIO_PN0 104
-#define TEGRA_GPIO_PN1 105
-#define TEGRA_GPIO_PN2 106
-#define TEGRA_GPIO_PN3 107
-#define TEGRA_GPIO_PN4 108
-#define TEGRA_GPIO_PN5 109
-#define TEGRA_GPIO_PN6 110
-#define TEGRA_GPIO_PN7 111
-#define TEGRA_GPIO_PO0 112
-#define TEGRA_GPIO_PO1 113
-#define TEGRA_GPIO_PO2 114
-#define TEGRA_GPIO_PO3 115
-#define TEGRA_GPIO_PO4 116
-#define TEGRA_GPIO_PO5 117
-#define TEGRA_GPIO_PO6 118
-#define TEGRA_GPIO_PO7 119
-#define TEGRA_GPIO_PP0 120
-#define TEGRA_GPIO_PP1 121
-#define TEGRA_GPIO_PP2 122
-#define TEGRA_GPIO_PP3 123
-#define TEGRA_GPIO_PP4 124
-#define TEGRA_GPIO_PP5 125
-#define TEGRA_GPIO_PP6 126
-#define TEGRA_GPIO_PP7 127
-#define TEGRA_GPIO_PQ0 128
-#define TEGRA_GPIO_PQ1 129
-#define TEGRA_GPIO_PQ2 130
-#define TEGRA_GPIO_PQ3 131
-#define TEGRA_GPIO_PQ4 132
-#define TEGRA_GPIO_PQ5 133
-#define TEGRA_GPIO_PQ6 134
-#define TEGRA_GPIO_PQ7 135
-#define TEGRA_GPIO_PR0 136
-#define TEGRA_GPIO_PR1 137
-#define TEGRA_GPIO_PR2 138
-#define TEGRA_GPIO_PR3 139
-#define TEGRA_GPIO_PR4 140
-#define TEGRA_GPIO_PR5 141
-#define TEGRA_GPIO_PR6 142
-#define TEGRA_GPIO_PR7 143
-#define TEGRA_GPIO_PS0 144
-#define TEGRA_GPIO_PS1 145
-#define TEGRA_GPIO_PS2 146
-#define TEGRA_GPIO_PS3 147
-#define TEGRA_GPIO_PS4 148
-#define TEGRA_GPIO_PS5 149
-#define TEGRA_GPIO_PS6 150
-#define TEGRA_GPIO_PS7 151
-#define TEGRA_GPIO_PT0 152
-#define TEGRA_GPIO_PT1 153
-#define TEGRA_GPIO_PT2 154
-#define TEGRA_GPIO_PT3 155
-#define TEGRA_GPIO_PT4 156
-#define TEGRA_GPIO_PT5 157
-#define TEGRA_GPIO_PT6 158
-#define TEGRA_GPIO_PT7 159
-#define TEGRA_GPIO_PU0 160
-#define TEGRA_GPIO_PU1 161
-#define TEGRA_GPIO_PU2 162
-#define TEGRA_GPIO_PU3 163
-#define TEGRA_GPIO_PU4 164
-#define TEGRA_GPIO_PU5 165
-#define TEGRA_GPIO_PU6 166
-#define TEGRA_GPIO_PU7 167
-#define TEGRA_GPIO_PV0 168
-#define TEGRA_GPIO_PV1 169
-#define TEGRA_GPIO_PV2 170
-#define TEGRA_GPIO_PV3 171
-#define TEGRA_GPIO_PV4 172
-#define TEGRA_GPIO_PV5 173
-#define TEGRA_GPIO_PV6 174
-#define TEGRA_GPIO_PV7 175
-#define TEGRA_GPIO_PW0 176
-#define TEGRA_GPIO_PW1 177
-#define TEGRA_GPIO_PW2 178
-#define TEGRA_GPIO_PW3 179
-#define TEGRA_GPIO_PW4 180
-#define TEGRA_GPIO_PW5 181
-#define TEGRA_GPIO_PW6 182
-#define TEGRA_GPIO_PW7 183
-#define TEGRA_GPIO_PX0 184
-#define TEGRA_GPIO_PX1 185
-#define TEGRA_GPIO_PX2 186
-#define TEGRA_GPIO_PX3 187
-#define TEGRA_GPIO_PX4 188
-#define TEGRA_GPIO_PX5 189
-#define TEGRA_GPIO_PX6 190
-#define TEGRA_GPIO_PX7 191
-#define TEGRA_GPIO_PY0 192
-#define TEGRA_GPIO_PY1 193
-#define TEGRA_GPIO_PY2 194
-#define TEGRA_GPIO_PY3 195
-#define TEGRA_GPIO_PY4 196
-#define TEGRA_GPIO_PY5 197
-#define TEGRA_GPIO_PY6 198
-#define TEGRA_GPIO_PY7 199
-#define TEGRA_GPIO_PZ0 200
-#define TEGRA_GPIO_PZ1 201
-#define TEGRA_GPIO_PZ2 202
-#define TEGRA_GPIO_PZ3 203
-#define TEGRA_GPIO_PZ4 204
-#define TEGRA_GPIO_PZ5 205
-#define TEGRA_GPIO_PZ6 206
-#define TEGRA_GPIO_PZ7 207
-#define TEGRA_GPIO_PAA0 208
-#define TEGRA_GPIO_PAA1 209
-#define TEGRA_GPIO_PAA2 210
-#define TEGRA_GPIO_PAA3 211
-#define TEGRA_GPIO_PAA4 212
-#define TEGRA_GPIO_PAA5 213
-#define TEGRA_GPIO_PAA6 214
-#define TEGRA_GPIO_PAA7 215
-#define TEGRA_GPIO_PBB0 216
-#define TEGRA_GPIO_PBB1 217
-#define TEGRA_GPIO_PBB2 218
-#define TEGRA_GPIO_PBB3 219
-#define TEGRA_GPIO_PBB4 220
-#define TEGRA_GPIO_PBB5 221
-#define TEGRA_GPIO_PBB6 222
-#define TEGRA_GPIO_PBB7 223
-
-#endif
diff --git a/arch/arm/mach-tegra/iomap.h b/arch/arm/mach-tegra/iomap.h
index 3f5fa07..cbee57f 100644
--- a/arch/arm/mach-tegra/iomap.h
+++ b/arch/arm/mach-tegra/iomap.h
@@ -24,44 +24,12 @@
#define TEGRA_IRAM_BASE 0x40000000
#define TEGRA_IRAM_SIZE SZ_256K
-#define TEGRA_IRAM_CODE_AREA (TEGRA_IRAM_BASE + SZ_4K)
-
-#define TEGRA_HOST1X_BASE 0x50000000
-#define TEGRA_HOST1X_SIZE 0x24000
-
#define TEGRA_ARM_PERIF_BASE 0x50040000
#define TEGRA_ARM_PERIF_SIZE SZ_8K
-#define TEGRA_ARM_PL310_BASE 0x50043000
-#define TEGRA_ARM_PL310_SIZE SZ_4K
-
#define TEGRA_ARM_INT_DIST_BASE 0x50041000
#define TEGRA_ARM_INT_DIST_SIZE SZ_4K
-#define TEGRA_MPE_BASE 0x54040000
-#define TEGRA_MPE_SIZE SZ_256K
-
-#define TEGRA_VI_BASE 0x54080000
-#define TEGRA_VI_SIZE SZ_256K
-
-#define TEGRA_ISP_BASE 0x54100000
-#define TEGRA_ISP_SIZE SZ_256K
-
-#define TEGRA_DISPLAY_BASE 0x54200000
-#define TEGRA_DISPLAY_SIZE SZ_256K
-
-#define TEGRA_DISPLAY2_BASE 0x54240000
-#define TEGRA_DISPLAY2_SIZE SZ_256K
-
-#define TEGRA_HDMI_BASE 0x54280000
-#define TEGRA_HDMI_SIZE SZ_256K
-
-#define TEGRA_GART_BASE 0x58000000
-#define TEGRA_GART_SIZE SZ_32M
-
-#define TEGRA_RES_SEMA_BASE 0x60001000
-#define TEGRA_RES_SEMA_SIZE SZ_4K
-
#define TEGRA_PRIMARY_ICTLR_BASE 0x60004000
#define TEGRA_PRIMARY_ICTLR_SIZE SZ_64
@@ -98,51 +66,15 @@
#define TEGRA_FLOW_CTRL_BASE 0x60007000
#define TEGRA_FLOW_CTRL_SIZE 20
-#define TEGRA_AHB_DMA_BASE 0x60008000
-#define TEGRA_AHB_DMA_SIZE SZ_4K
-
-#define TEGRA_AHB_DMA_CH0_BASE 0x60009000
-#define TEGRA_AHB_DMA_CH0_SIZE 32
-
-#define TEGRA_APB_DMA_BASE 0x6000A000
-#define TEGRA_APB_DMA_SIZE SZ_4K
-
-#define TEGRA_APB_DMA_CH0_BASE 0x6000B000
-#define TEGRA_APB_DMA_CH0_SIZE 32
-
-#define TEGRA_AHB_GIZMO_BASE 0x6000C004
-#define TEGRA_AHB_GIZMO_SIZE 0x10C
-
#define TEGRA_SB_BASE 0x6000C200
#define TEGRA_SB_SIZE 256
-#define TEGRA_STATMON_BASE 0x6000C400
-#define TEGRA_STATMON_SIZE SZ_1K
-
-#define TEGRA_GPIO_BASE 0x6000D000
-#define TEGRA_GPIO_SIZE SZ_4K
-
#define TEGRA_EXCEPTION_VECTORS_BASE 0x6000F000
#define TEGRA_EXCEPTION_VECTORS_SIZE SZ_4K
#define TEGRA_APB_MISC_BASE 0x70000000
#define TEGRA_APB_MISC_SIZE SZ_4K
-#define TEGRA_APB_MISC_DAS_BASE 0x70000c00
-#define TEGRA_APB_MISC_DAS_SIZE SZ_128
-
-#define TEGRA_AC97_BASE 0x70002000
-#define TEGRA_AC97_SIZE SZ_512
-
-#define TEGRA_SPDIF_BASE 0x70002400
-#define TEGRA_SPDIF_SIZE SZ_512
-
-#define TEGRA_I2S1_BASE 0x70002800
-#define TEGRA_I2S1_SIZE SZ_256
-
-#define TEGRA_I2S2_BASE 0x70002A00
-#define TEGRA_I2S2_SIZE SZ_256
-
#define TEGRA_UARTA_BASE 0x70006000
#define TEGRA_UARTA_SIZE SZ_64
@@ -158,87 +90,15 @@
#define TEGRA_UARTE_BASE 0x70006400
#define TEGRA_UARTE_SIZE SZ_256
-#define TEGRA_NAND_BASE 0x70008000
-#define TEGRA_NAND_SIZE SZ_256
-
-#define TEGRA_HSMMC_BASE 0x70008500
-#define TEGRA_HSMMC_SIZE SZ_256
-
-#define TEGRA_SNOR_BASE 0x70009000
-#define TEGRA_SNOR_SIZE SZ_4K
-
-#define TEGRA_PWFM_BASE 0x7000A000
-#define TEGRA_PWFM_SIZE SZ_256
-
-#define TEGRA_PWFM0_BASE 0x7000A000
-#define TEGRA_PWFM0_SIZE 4
-
-#define TEGRA_PWFM1_BASE 0x7000A010
-#define TEGRA_PWFM1_SIZE 4
-
-#define TEGRA_PWFM2_BASE 0x7000A020
-#define TEGRA_PWFM2_SIZE 4
-
-#define TEGRA_PWFM3_BASE 0x7000A030
-#define TEGRA_PWFM3_SIZE 4
-
-#define TEGRA_MIPI_BASE 0x7000B000
-#define TEGRA_MIPI_SIZE SZ_256
-
-#define TEGRA_I2C_BASE 0x7000C000
-#define TEGRA_I2C_SIZE SZ_256
-
-#define TEGRA_TWC_BASE 0x7000C100
-#define TEGRA_TWC_SIZE SZ_256
-
-#define TEGRA_SPI_BASE 0x7000C380
-#define TEGRA_SPI_SIZE 48
-
-#define TEGRA_I2C2_BASE 0x7000C400
-#define TEGRA_I2C2_SIZE SZ_256
-
-#define TEGRA_I2C3_BASE 0x7000C500
-#define TEGRA_I2C3_SIZE SZ_256
-
-#define TEGRA_OWR_BASE 0x7000C600
-#define TEGRA_OWR_SIZE 80
-
-#define TEGRA_DVC_BASE 0x7000D000
-#define TEGRA_DVC_SIZE SZ_512
-
-#define TEGRA_SPI1_BASE 0x7000D400
-#define TEGRA_SPI1_SIZE SZ_512
-
-#define TEGRA_SPI2_BASE 0x7000D600
-#define TEGRA_SPI2_SIZE SZ_512
-
-#define TEGRA_SPI3_BASE 0x7000D800
-#define TEGRA_SPI3_SIZE SZ_512
-
-#define TEGRA_SPI4_BASE 0x7000DA00
-#define TEGRA_SPI4_SIZE SZ_512
-
-#define TEGRA_RTC_BASE 0x7000E000
-#define TEGRA_RTC_SIZE SZ_256
-
-#define TEGRA_KBC_BASE 0x7000E200
-#define TEGRA_KBC_SIZE SZ_256
-
#define TEGRA_PMC_BASE 0x7000E400
#define TEGRA_PMC_SIZE SZ_256
-#define TEGRA_MC_BASE 0x7000F000
-#define TEGRA_MC_SIZE SZ_1K
-
#define TEGRA_EMC_BASE 0x7000F400
#define TEGRA_EMC_SIZE SZ_1K
#define TEGRA_FUSE_BASE 0x7000F800
#define TEGRA_FUSE_SIZE SZ_1K
-#define TEGRA_KFUSE_BASE 0x7000FC00
-#define TEGRA_KFUSE_SIZE SZ_1K
-
#define TEGRA_EMC0_BASE 0x7001A000
#define TEGRA_EMC0_SIZE SZ_2K
@@ -248,18 +108,6 @@
#define TEGRA_CSITE_BASE 0x70040000
#define TEGRA_CSITE_SIZE SZ_256K
-#define TEGRA_SDMMC1_BASE 0xC8000000
-#define TEGRA_SDMMC1_SIZE SZ_512
-
-#define TEGRA_SDMMC2_BASE 0xC8000200
-#define TEGRA_SDMMC2_SIZE SZ_512
-
-#define TEGRA_SDMMC3_BASE 0xC8000400
-#define TEGRA_SDMMC3_SIZE SZ_512
-
-#define TEGRA_SDMMC4_BASE 0xC8000600
-#define TEGRA_SDMMC4_SIZE SZ_512
-
/* On TEGRA, many peripherals are very closely packed in
* two 256MB io windows (that actually only use about 64KB
* at the start of each).
diff --git a/arch/arm/mach-tegra/irammap.h b/arch/arm/mach-tegra/irammap.h
index 501952a..e32e174 100644
--- a/arch/arm/mach-tegra/irammap.h
+++ b/arch/arm/mach-tegra/irammap.h
@@ -23,4 +23,10 @@
#define TEGRA_IRAM_RESET_HANDLER_OFFSET 0
#define TEGRA_IRAM_RESET_HANDLER_SIZE SZ_1K
+/*
+ * This area is used for LPx resume vector, only while LPx power state is
+ * active. At other times, the AVP may use this area for arbitrary purposes
+ */
+#define TEGRA_IRAM_LPx_RESUME_AREA (TEGRA_IRAM_BASE + SZ_4K)
+
#endif
diff --git a/arch/arm/mach-tegra/pm.c b/arch/arm/mach-tegra/pm.c
index ed294a0..36ed88a 100644
--- a/arch/arm/mach-tegra/pm.c
+++ b/arch/arm/mach-tegra/pm.c
@@ -263,10 +263,10 @@
tegra_pmc_suspend();
/* copy the reset vector & SDRAM shutdown code into IRAM */
- memcpy(iram_save_addr, IO_ADDRESS(TEGRA_IRAM_CODE_AREA),
+ memcpy(iram_save_addr, IO_ADDRESS(TEGRA_IRAM_LPx_RESUME_AREA),
iram_save_size);
- memcpy(IO_ADDRESS(TEGRA_IRAM_CODE_AREA), tegra_lp1_iram.start_addr,
- iram_save_size);
+ memcpy(IO_ADDRESS(TEGRA_IRAM_LPx_RESUME_AREA),
+ tegra_lp1_iram.start_addr, iram_save_size);
*((u32 *)tegra_cpu_lp1_mask) = 1;
}
@@ -276,7 +276,7 @@
tegra_pmc_resume();
/* restore IRAM */
- memcpy(IO_ADDRESS(TEGRA_IRAM_CODE_AREA), iram_save_addr,
+ memcpy(IO_ADDRESS(TEGRA_IRAM_LPx_RESUME_AREA), iram_save_addr,
iram_save_size);
*(u32 *)tegra_cpu_lp1_mask = 0;
diff --git a/arch/arm/mach-tegra/pm.h b/arch/arm/mach-tegra/pm.h
index fe204e5..6e92a7c 100644
--- a/arch/arm/mach-tegra/pm.h
+++ b/arch/arm/mach-tegra/pm.h
@@ -37,9 +37,6 @@
extern unsigned long l2x0_saved_regs_addr;
-void save_cpu_arch_register(void);
-void restore_cpu_arch_register(void);
-
void tegra_clear_cpu_in_lp2(void);
bool tegra_set_cpu_in_lp2(void);
diff --git a/arch/arm/mach-tegra/pmc.c b/arch/arm/mach-tegra/pmc.c
index 8acb881..93a4dbc 100644
--- a/arch/arm/mach-tegra/pmc.c
+++ b/arch/arm/mach-tegra/pmc.c
@@ -166,6 +166,15 @@
return tegra_pmc_powergate_remove_clamping(id);
}
+void tegra_pmc_restart(enum reboot_mode mode, const char *cmd)
+{
+ u32 val;
+
+ val = tegra_pmc_readl(0);
+ val |= 0x10;
+ tegra_pmc_writel(val, 0);
+}
+
#ifdef CONFIG_PM_SLEEP
static void set_power_timers(u32 us_on, u32 us_off, unsigned long rate)
{
@@ -285,7 +294,28 @@
{ }
};
-static void __init tegra_pmc_parse_dt(void)
+void __init tegra_pmc_init_irq(void)
+{
+ struct device_node *np;
+ u32 val;
+
+ np = of_find_matching_node(NULL, matches);
+ BUG_ON(!np);
+
+ tegra_pmc_base = of_iomap(np, 0);
+
+ tegra_pmc_invert_interrupt = of_property_read_bool(np,
+ "nvidia,invert-interrupt");
+
+ val = tegra_pmc_readl(PMC_CTRL);
+ if (tegra_pmc_invert_interrupt)
+ val |= PMC_CTRL_INTR_LOW;
+ else
+ val &= ~PMC_CTRL_INTR_LOW;
+ tegra_pmc_writel(val, PMC_CTRL);
+}
+
+void __init tegra_pmc_init(void)
{
struct device_node *np;
u32 prop;
@@ -296,10 +326,6 @@
np = of_find_matching_node(NULL, matches);
BUG_ON(!np);
- tegra_pmc_base = of_iomap(np, 0);
-
- tegra_pmc_invert_interrupt = of_property_read_bool(np,
- "nvidia,invert-interrupt");
tegra_pclk = of_clk_get_by_name(np, "pclk");
WARN_ON(IS_ERR(tegra_pclk));
@@ -365,17 +391,3 @@
pmc_pm_data.suspend_mode = suspend_mode;
}
-
-void __init tegra_pmc_init(void)
-{
- u32 val;
-
- tegra_pmc_parse_dt();
-
- val = tegra_pmc_readl(PMC_CTRL);
- if (tegra_pmc_invert_interrupt)
- val |= PMC_CTRL_INTR_LOW;
- else
- val &= ~PMC_CTRL_INTR_LOW;
- tegra_pmc_writel(val, PMC_CTRL);
-}
diff --git a/arch/arm/mach-tegra/pmc.h b/arch/arm/mach-tegra/pmc.h
index 549f8c7..59e19c34 100644
--- a/arch/arm/mach-tegra/pmc.h
+++ b/arch/arm/mach-tegra/pmc.h
@@ -18,6 +18,8 @@
#ifndef __MACH_TEGRA_PMC_H
#define __MACH_TEGRA_PMC_H
+#include <linux/reboot.h>
+
enum tegra_suspend_mode {
TEGRA_SUSPEND_NONE = 0,
TEGRA_SUSPEND_LP2, /* CPU voltage off */
@@ -39,6 +41,9 @@
int tegra_pmc_cpu_power_on(int cpuid);
int tegra_pmc_cpu_remove_clamping(int cpuid);
+void tegra_pmc_restart(enum reboot_mode mode, const char *cmd);
+
+void tegra_pmc_init_irq(void);
void tegra_pmc_init(void);
#endif
diff --git a/arch/arm/mach-tegra/reset.c b/arch/arm/mach-tegra/reset.c
index fd0bbf8..568f5bb 100644
--- a/arch/arm/mach-tegra/reset.c
+++ b/arch/arm/mach-tegra/reset.c
@@ -82,7 +82,7 @@
#ifdef CONFIG_PM_SLEEP
__tegra_cpu_reset_handler_data[TEGRA_RESET_STARTUP_LP1] =
- TEGRA_IRAM_CODE_AREA;
+ TEGRA_IRAM_LPx_RESUME_AREA;
__tegra_cpu_reset_handler_data[TEGRA_RESET_STARTUP_LP2] =
virt_to_phys((void *)tegra_resume);
#endif
diff --git a/arch/arm/mach-tegra/sleep-tegra20.S b/arch/arm/mach-tegra/sleep-tegra20.S
index 5c3bd11..aaaf3ab 100644
--- a/arch/arm/mach-tegra/sleep-tegra20.S
+++ b/arch/arm/mach-tegra/sleep-tegra20.S
@@ -25,6 +25,7 @@
#include <asm/cp15.h>
#include <asm/cache.h>
+#include "irammap.h"
#include "sleep.h"
#include "flowctrl.h"
@@ -235,7 +236,7 @@
mov32 r0, tegra20_tear_down_core
mov32 r1, tegra20_iram_start
sub r0, r0, r1
- mov32 r1, TEGRA_IRAM_CODE_AREA
+ mov32 r1, TEGRA_IRAM_LPx_RESUME_AREA
add r0, r0, r1
mov pc, r3
@@ -328,7 +329,7 @@
* The physical address of tegra_resume expected to be stored in
* PMC_SCRATCH41.
*
- * NOTE: THIS *MUST* BE RELOCATED TO TEGRA_IRAM_CODE_AREA.
+ * NOTE: THIS *MUST* BE RELOCATED TO TEGRA_IRAM_LPx_RESUME_AREA.
*/
ENTRY(tegra20_lp1_reset)
/*
diff --git a/arch/arm/mach-tegra/sleep-tegra30.S b/arch/arm/mach-tegra/sleep-tegra30.S
index 63fa91b..c6fc15c 100644
--- a/arch/arm/mach-tegra/sleep-tegra30.S
+++ b/arch/arm/mach-tegra/sleep-tegra30.S
@@ -20,6 +20,7 @@
#include <asm/asm-offsets.h>
#include <asm/cache.h>
+#include "irammap.h"
#include "fuse.h"
#include "sleep.h"
#include "flowctrl.h"
@@ -262,7 +263,7 @@
mov32 r0, tegra30_tear_down_core
mov32 r1, tegra30_iram_start
sub r0, r0, r1
- mov32 r1, TEGRA_IRAM_CODE_AREA
+ mov32 r1, TEGRA_IRAM_LPx_RESUME_AREA
add r0, r0, r1
mov pc, r3
@@ -314,7 +315,7 @@
* The physical address of tegra_resume expected to be stored in
* PMC_SCRATCH41.
*
- * NOTE: THIS *MUST* BE RELOCATED TO TEGRA_IRAM_CODE_AREA.
+ * NOTE: THIS *MUST* BE RELOCATED TO TEGRA_IRAM_LPx_RESUME_AREA.
*/
ENTRY(tegra30_lp1_reset)
/*
diff --git a/arch/arm/mach-tegra/tegra.c b/arch/arm/mach-tegra/tegra.c
index 5b86055..386115a 100644
--- a/arch/arm/mach-tegra/tegra.c
+++ b/arch/arm/mach-tegra/tegra.c
@@ -16,7 +16,6 @@
*
*/
-#include <linux/clocksource.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
@@ -34,16 +33,78 @@
#include <linux/sys_soc.h>
#include <linux/usb/tegra_usb_phy.h>
#include <linux/clk/tegra.h>
+#include <linux/irqchip.h>
+#include <asm/hardware/cache-l2x0.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <asm/setup.h>
+#include "apbio.h"
#include "board.h"
#include "common.h"
+#include "cpuidle.h"
#include "fuse.h"
#include "iomap.h"
+#include "irq.h"
+#include "pmc.h"
+#include "pm.h"
+#include "reset.h"
+#include "sleep.h"
+
+/*
+ * Storage for debug-macro.S's state.
+ *
+ * This must be in .data not .bss so that it gets initialized each time the
+ * kernel is loaded. The data is declared here rather than debug-macro.S so
+ * that multiple inclusions of debug-macro.S point at the same data.
+ */
+u32 tegra_uart_config[4] = {
+ /* Debug UART initialization required */
+ 1,
+ /* Debug UART physical address */
+ 0,
+ /* Debug UART virtual address */
+ 0,
+ /* Scratch space for debug macro */
+ 0,
+};
+
+static void __init tegra_init_cache(void)
+{
+#ifdef CONFIG_CACHE_L2X0
+ int ret;
+ void __iomem *p = IO_ADDRESS(TEGRA_ARM_PERIF_BASE) + 0x3000;
+ u32 aux_ctrl, cache_type;
+
+ cache_type = readl(p + L2X0_CACHE_TYPE);
+ aux_ctrl = (cache_type & 0x700) << (17-8);
+ aux_ctrl |= 0x7C400001;
+
+ ret = l2x0_of_init(aux_ctrl, 0x8200c3fe);
+ if (!ret)
+ l2x0_saved_regs_addr = virt_to_phys(&l2x0_saved_regs);
+#endif
+}
+
+static void __init tegra_init_early(void)
+{
+ tegra_cpu_reset_handler_init();
+ tegra_apb_io_init();
+ tegra_init_fuse();
+ tegra_init_cache();
+ tegra_powergate_init();
+ tegra_hotplug_init();
+}
+
+static void __init tegra_dt_init_irq(void)
+{
+ tegra_pmc_init_irq();
+ tegra_init_irq();
+ irqchip_init();
+ tegra_legacy_irq_syscore_init();
+}
static void __init tegra_dt_init(void)
{
@@ -51,6 +112,8 @@
struct soc_device *soc_dev;
struct device *parent = NULL;
+ tegra_pmc_init();
+
tegra_clocks_apply_init_table();
soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
@@ -97,7 +160,9 @@
{
int i;
- tegra_init_late();
+ tegra_init_suspend();
+ tegra_cpuidle_init();
+ tegra_powergate_debugfs_init();
for (i = 0; i < ARRAY_SIZE(board_init_funcs); i++) {
if (of_machine_is_compatible(board_init_funcs[i].machine)) {
@@ -119,9 +184,8 @@
.smp = smp_ops(tegra_smp_ops),
.init_early = tegra_init_early,
.init_irq = tegra_dt_init_irq,
- .init_time = clocksource_of_init,
.init_machine = tegra_dt_init,
.init_late = tegra_dt_init_late,
- .restart = tegra_assert_system_reset,
+ .restart = tegra_pmc_restart,
.dt_compat = tegra_dt_board_compat,
MACHINE_END
diff --git a/arch/arm/mach-u300/Kconfig b/arch/arm/mach-u300/Kconfig
index a165986..8e23071 100644
--- a/arch/arm/mach-u300/Kconfig
+++ b/arch/arm/mach-u300/Kconfig
@@ -5,7 +5,6 @@
select ARM_AMBA
select ARM_PATCH_PHYS_VIRT
select ARM_VIC
- select CLKDEV_LOOKUP
select CLKSRC_MMIO
select CLKSRC_OF
select COMMON_CLK
diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig
index 99a28d6..c67f8ad 100644
--- a/arch/arm/mach-ux500/Kconfig
+++ b/arch/arm/mach-ux500/Kconfig
@@ -1,36 +1,31 @@
config ARCH_U8500
bool "ST-Ericsson U8500 Series" if ARCH_MULTI_V7
depends on MMU
+ select AB8500_CORE
+ select ABX500_CORE
select ARCH_HAS_CPUFREQ
select ARCH_REQUIRE_GPIOLIB
select ARM_AMBA
- select CLKDEV_LOOKUP
- select CPU_V7
- select GENERIC_CLOCKEVENTS
- select HAVE_ARM_SCU if SMP
- select HAVE_ARM_TWD if SMP
- select HAVE_SMP
- select MIGHT_HAVE_CACHE_L2X0
- help
- Support for ST-Ericsson's Ux500 architecture
-
-if ARCH_U8500
-
-config UX500_SOC_COMMON
- bool
- default y
- select ABX500_CORE
- select AB8500_CORE
select ARM_ERRATA_754322
select ARM_ERRATA_764369 if SMP
select ARM_GIC
select CACHE_L2X0
select CLKSRC_NOMADIK_MTU
select COMMON_CLK
+ select CPU_V7
+ select GENERIC_CLOCKEVENTS
+ select HAVE_ARM_SCU if SMP
+ select HAVE_ARM_TWD if SMP
+ select HAVE_SMP
+ select MIGHT_HAVE_CACHE_L2X0
select PINCTRL
- select PINCTRL_NOMADIK
select PINCTRL_ABX500
+ select PINCTRL_NOMADIK
select PL310_ERRATA_753970 if CACHE_PL310
+ help
+ Support for ST-Ericsson's Ux500 architecture
+
+if ARCH_U8500
config UX500_SOC_DB8500
bool
diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig
index 3657954..d7e7422 100644
--- a/arch/arm/mach-vexpress/Kconfig
+++ b/arch/arm/mach-vexpress/Kconfig
@@ -4,14 +4,12 @@
select ARM_AMBA
select ARM_GIC
select ARM_TIMER_SP804
- select CLKDEV_LOOKUP
select COMMON_CLK
select COMMON_CLK_VERSATILE
select CPU_V7
select GENERIC_CLOCKEVENTS
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
- select HAVE_CLK
select HAVE_PATA_PLATFORM
select HAVE_SMP
select ICST
diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c
index 95a469e..4f8b8cb 100644
--- a/arch/arm/mach-vexpress/v2m.c
+++ b/arch/arm/mach-vexpress/v2m.c
@@ -1,12 +1,10 @@
/*
* Versatile Express V2M Motherboard Support
*/
-#include <linux/clocksource.h>
#include <linux/device.h>
#include <linux/amba/bus.h>
#include <linux/amba/mmci.h>
#include <linux/io.h>
-#include <linux/clocksource.h>
#include <linux/smp.h>
#include <linux/init.h>
#include <linux/of_address.h>
@@ -22,7 +20,6 @@
#include <linux/regulator/fixed.h>
#include <linux/regulator/machine.h>
#include <linux/vexpress.h>
-#include <linux/clk-provider.h>
#include <linux/clkdev.h>
#include <asm/mach-types.h>
@@ -422,16 +419,8 @@
pr_warning("vexpress: DT HBI (%x) is not matching "
"hardware (%x)!\n", dt_hbi, hbi);
}
-}
-static void __init v2m_dt_timer_init(void)
-{
- of_clk_init(NULL);
-
- clocksource_of_init();
-
- versatile_sched_clock_init(vexpress_get_24mhz_clock_base(),
- 24000000);
+ versatile_sched_clock_init(vexpress_get_24mhz_clock_base(), 24000000);
}
static const struct of_device_id v2m_dt_bus_match[] __initconst = {
@@ -458,6 +447,5 @@
.smp_init = smp_init_ops(vexpress_smp_init_ops),
.map_io = v2m_dt_map_io,
.init_early = v2m_dt_init_early,
- .init_time = v2m_dt_timer_init,
.init_machine = v2m_dt_init,
MACHINE_END
diff --git a/arch/arm/mach-vt8500/Kconfig b/arch/arm/mach-vt8500/Kconfig
index 9b25293..927be93 100644
--- a/arch/arm/mach-vt8500/Kconfig
+++ b/arch/arm/mach-vt8500/Kconfig
@@ -5,7 +5,6 @@
select CLKDEV_LOOKUP
select CLKSRC_OF
select GENERIC_CLOCKEVENTS
- select HAVE_CLK
select VT8500_TIMER
select PINCTRL
help
diff --git a/arch/arm/mach-vt8500/common.h b/arch/arm/mach-vt8500/common.h
deleted file mode 100644
index 087787a..0000000
--- a/arch/arm/mach-vt8500/common.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* linux/arch/arm/mach-vt8500/dt_common.h
- *
- * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __ARCH_ARM_MACH_VT8500_DT_COMMON_H
-#define __ARCH_ARM_MACH_VT8500_DT_COMMON_H
-
-#include <linux/of.h>
-
-/* defined in drivers/clk/clk-vt8500.c */
-void __init vtwm_clk_init(void __iomem *pmc_base);
-
-#endif
diff --git a/arch/arm/mach-vt8500/vt8500.c b/arch/arm/mach-vt8500/vt8500.c
index eefaa60..4a73464 100644
--- a/arch/arm/mach-vt8500/vt8500.c
+++ b/arch/arm/mach-vt8500/vt8500.c
@@ -18,7 +18,6 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#include <linux/clocksource.h>
#include <linux/io.h>
#include <linux/pm.h>
#include <linux/reboot.h>
@@ -33,8 +32,6 @@
#include <linux/of_irq.h>
#include <linux/of_platform.h>
-#include "common.h"
-
#define LEGACY_GPIO_BASE 0xD8110000
#define LEGACY_PMC_BASE 0xD8130000
@@ -162,8 +159,6 @@
else
pr_err("%s: PMC Hibernation register could not be remapped, not enabling power off!\n", __func__);
- vtwm_clk_init(pmc_base);
-
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
@@ -180,7 +175,6 @@
.dt_compat = vt8500_dt_compat,
.map_io = vt8500_map_io,
.init_machine = vt8500_init,
- .init_time = clocksource_of_init,
.restart = vt8500_restart,
MACHINE_END
diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig
index e07a5fd..e67fa16 100644
--- a/drivers/block/Kconfig
+++ b/drivers/block/Kconfig
@@ -505,7 +505,7 @@
config BLK_DEV_HD
bool "Very old hard disk (MFM/RLL/IDE) driver"
depends on HAVE_IDE
- depends on !ARM || ARCH_RPC || ARCH_SHARK || BROKEN
+ depends on !ARM || ARCH_RPC || BROKEN
help
This is a very old hard disk driver that lacks the enhanced
functionality of the newer ones.
diff --git a/drivers/clk/clk-bcm2835.c b/drivers/clk/clk-bcm2835.c
index 5fb4ff5..6b950ca 100644
--- a/drivers/clk/clk-bcm2835.c
+++ b/drivers/clk/clk-bcm2835.c
@@ -20,14 +20,8 @@
#include <linux/clk-provider.h>
#include <linux/clkdev.h>
#include <linux/clk/bcm2835.h>
-#include <linux/clk-provider.h>
#include <linux/of.h>
-static const struct of_device_id clk_match[] __initconst = {
- { .compatible = "fixed-clock", .data = of_fixed_clk_setup, },
- { }
-};
-
/*
* These are fixed clocks. They're probably not all root clocks and it may
* be possible to turn them on and off but until this is mapped out better
@@ -63,6 +57,4 @@
ret = clk_register_clkdev(clk, NULL, "20215000.uart");
if (ret)
pr_err("uart1_pclk alias not registered\n");
-
- of_clk_init(clk_match);
}
diff --git a/drivers/clk/clk-highbank.c b/drivers/clk/clk-highbank.c
index 2e08cb0..2e7e9d9 100644
--- a/drivers/clk/clk-highbank.c
+++ b/drivers/clk/clk-highbank.c
@@ -20,8 +20,7 @@
#include <linux/clk-provider.h>
#include <linux/io.h>
#include <linux/of.h>
-
-extern void __iomem *sregs_base;
+#include <linux/of_address.h>
#define HB_PLL_LOCK_500 0x20000000
#define HB_PLL_LOCK 0x10000000
@@ -280,6 +279,7 @@
const char *clk_name = node->name;
const char *parent_name;
struct clk_init_data init;
+ struct device_node *srnp;
int rc;
rc = of_property_read_u32(node, "reg", ®);
@@ -290,7 +290,11 @@
if (WARN_ON(!hb_clk))
return NULL;
- hb_clk->reg = sregs_base + reg;
+ /* Map system registers */
+ srnp = of_find_compatible_node(NULL, NULL, "calxeda,hb-sregs");
+ hb_clk->reg = of_iomap(srnp, 0);
+ BUG_ON(!hb_clk->reg);
+ hb_clk->reg += reg;
of_property_read_string(node, "clock-output-names", &clk_name);
diff --git a/drivers/clk/clk-nomadik.c b/drivers/clk/clk-nomadik.c
index 51410c2..6a934a5 100644
--- a/drivers/clk/clk-nomadik.c
+++ b/drivers/clk/clk-nomadik.c
@@ -27,6 +27,14 @@
*/
#define SRC_CR 0x00U
+#define SRC_CR_T0_ENSEL BIT(15)
+#define SRC_CR_T1_ENSEL BIT(17)
+#define SRC_CR_T2_ENSEL BIT(19)
+#define SRC_CR_T3_ENSEL BIT(21)
+#define SRC_CR_T4_ENSEL BIT(23)
+#define SRC_CR_T5_ENSEL BIT(25)
+#define SRC_CR_T6_ENSEL BIT(27)
+#define SRC_CR_T7_ENSEL BIT(29)
#define SRC_XTALCR 0x0CU
#define SRC_XTALCR_XTALTIMEN BIT(20)
#define SRC_XTALCR_SXTALDIS BIT(19)
@@ -54,6 +62,79 @@
/* Base address of the SRC */
static void __iomem *src_base;
+static int nomadik_clk_reboot_handler(struct notifier_block *this,
+ unsigned long code,
+ void *unused)
+{
+ u32 val;
+
+ /* The main chrystal need to be enabled for reboot to work */
+ val = readl(src_base + SRC_XTALCR);
+ val &= ~SRC_XTALCR_MXTALOVER;
+ val |= SRC_XTALCR_MXTALEN;
+ pr_crit("force-enabling MXTALO\n");
+ writel(val, src_base + SRC_XTALCR);
+ return NOTIFY_OK;
+}
+
+static struct notifier_block nomadik_clk_reboot_notifier = {
+ .notifier_call = nomadik_clk_reboot_handler,
+};
+
+static const struct of_device_id nomadik_src_match[] __initconst = {
+ { .compatible = "stericsson,nomadik-src" },
+ { /* sentinel */ }
+};
+
+static void __init nomadik_src_init(void)
+{
+ struct device_node *np;
+ u32 val;
+
+ np = of_find_matching_node(NULL, nomadik_src_match);
+ if (!np) {
+ pr_crit("no matching node for SRC, aborting clock init\n");
+ return;
+ }
+ src_base = of_iomap(np, 0);
+ if (!src_base) {
+ pr_err("%s: must have src parent node with REGS (%s)\n",
+ __func__, np->name);
+ return;
+ }
+
+ /* Set all timers to use the 2.4 MHz TIMCLK */
+ val = readl(src_base + SRC_CR);
+ val |= SRC_CR_T0_ENSEL;
+ val |= SRC_CR_T1_ENSEL;
+ val |= SRC_CR_T2_ENSEL;
+ val |= SRC_CR_T3_ENSEL;
+ val |= SRC_CR_T4_ENSEL;
+ val |= SRC_CR_T5_ENSEL;
+ val |= SRC_CR_T6_ENSEL;
+ val |= SRC_CR_T7_ENSEL;
+ writel(val, src_base + SRC_CR);
+
+ val = readl(src_base + SRC_XTALCR);
+ pr_info("SXTALO is %s\n",
+ (val & SRC_XTALCR_SXTALDIS) ? "disabled" : "enabled");
+ pr_info("MXTAL is %s\n",
+ (val & SRC_XTALCR_MXTALSTAT) ? "enabled" : "disabled");
+ if (of_property_read_bool(np, "disable-sxtalo")) {
+ /* The machine uses an external oscillator circuit */
+ val |= SRC_XTALCR_SXTALDIS;
+ pr_info("disabling SXTALO\n");
+ }
+ if (of_property_read_bool(np, "disable-mxtalo")) {
+ /* Disable this too: also run by external oscillator */
+ val |= SRC_XTALCR_MXTALOVER;
+ val &= ~SRC_XTALCR_MXTALEN;
+ pr_info("disabling MXTALO\n");
+ }
+ writel(val, src_base + SRC_XTALCR);
+ register_reboot_notifier(&nomadik_clk_reboot_notifier);
+}
+
/**
* struct clk_pll1 - Nomadik PLL1 clock
* @hw: corresponding clock hardware entry
@@ -431,6 +512,9 @@
const char *parent_name;
u32 pll_id;
+ if (!src_base)
+ nomadik_src_init();
+
if (of_property_read_u32(np, "pll-id", &pll_id)) {
pr_err("%s: PLL \"%s\" missing pll-id property\n",
__func__, clk_name);
@@ -441,6 +525,8 @@
if (!IS_ERR(clk))
of_clk_add_provider(np, of_clk_src_simple_get, clk);
}
+CLK_OF_DECLARE(nomadik_pll_clk,
+ "st,nomadik-pll-clock", of_nomadik_pll_setup);
static void __init of_nomadik_hclk_setup(struct device_node *np)
{
@@ -448,6 +534,9 @@
const char *clk_name = np->name;
const char *parent_name;
+ if (!src_base)
+ nomadik_src_init();
+
parent_name = of_clk_get_parent_name(np, 0);
/*
* The HCLK divides PLL1 with 1 (passthru), 2, 3 or 4.
@@ -460,6 +549,8 @@
if (!IS_ERR(clk))
of_clk_add_provider(np, of_clk_src_simple_get, clk);
}
+CLK_OF_DECLARE(nomadik_hclk_clk,
+ "st,nomadik-hclk-clock", of_nomadik_hclk_setup);
static void __init of_nomadik_src_clk_setup(struct device_node *np)
{
@@ -468,6 +559,9 @@
const char *parent_name;
u32 clk_id;
+ if (!src_base)
+ nomadik_src_init();
+
if (of_property_read_u32(np, "clock-id", &clk_id)) {
pr_err("%s: SRC clock \"%s\" missing clock-id property\n",
__func__, clk_name);
@@ -478,89 +572,5 @@
if (!IS_ERR(clk))
of_clk_add_provider(np, of_clk_src_simple_get, clk);
}
-
-static const struct of_device_id nomadik_src_match[] __initconst = {
- { .compatible = "stericsson,nomadik-src" },
- { /* sentinel */ }
-};
-
-static const struct of_device_id nomadik_src_clk_match[] __initconst = {
- {
- .compatible = "fixed-clock",
- .data = of_fixed_clk_setup,
- },
- {
- .compatible = "fixed-factor-clock",
- .data = of_fixed_factor_clk_setup,
- },
- {
- .compatible = "st,nomadik-pll-clock",
- .data = of_nomadik_pll_setup,
- },
- {
- .compatible = "st,nomadik-hclk-clock",
- .data = of_nomadik_hclk_setup,
- },
- {
- .compatible = "st,nomadik-src-clock",
- .data = of_nomadik_src_clk_setup,
- },
- { /* sentinel */ }
-};
-
-static int nomadik_clk_reboot_handler(struct notifier_block *this,
- unsigned long code,
- void *unused)
-{
- u32 val;
-
- /* The main chrystal need to be enabled for reboot to work */
- val = readl(src_base + SRC_XTALCR);
- val &= ~SRC_XTALCR_MXTALOVER;
- val |= SRC_XTALCR_MXTALEN;
- pr_crit("force-enabling MXTALO\n");
- writel(val, src_base + SRC_XTALCR);
- return NOTIFY_OK;
-}
-
-static struct notifier_block nomadik_clk_reboot_notifier = {
- .notifier_call = nomadik_clk_reboot_handler,
-};
-
-void __init nomadik_clk_init(void)
-{
- struct device_node *np;
- u32 val;
-
- np = of_find_matching_node(NULL, nomadik_src_match);
- if (!np) {
- pr_crit("no matching node for SRC, aborting clock init\n");
- return;
- }
- src_base = of_iomap(np, 0);
- if (!src_base) {
- pr_err("%s: must have src parent node with REGS (%s)\n",
- __func__, np->name);
- return;
- }
- val = readl(src_base + SRC_XTALCR);
- pr_info("SXTALO is %s\n",
- (val & SRC_XTALCR_SXTALDIS) ? "disabled" : "enabled");
- pr_info("MXTAL is %s\n",
- (val & SRC_XTALCR_MXTALSTAT) ? "enabled" : "disabled");
- if (of_property_read_bool(np, "disable-sxtalo")) {
- /* The machine uses an external oscillator circuit */
- val |= SRC_XTALCR_SXTALDIS;
- pr_info("disabling SXTALO\n");
- }
- if (of_property_read_bool(np, "disable-mxtalo")) {
- /* Disable this too: also run by external oscillator */
- val |= SRC_XTALCR_MXTALOVER;
- val &= ~SRC_XTALCR_MXTALEN;
- pr_info("disabling MXTALO\n");
- }
- writel(val, src_base + SRC_XTALCR);
- register_reboot_notifier(&nomadik_clk_reboot_notifier);
-
- of_clk_init(nomadik_src_clk_match);
-}
+CLK_OF_DECLARE(nomadik_src_clk,
+ "st,nomadik-src-clock", of_nomadik_src_clk_setup);
diff --git a/drivers/clk/clk-prima2.c b/drivers/clk/clk-prima2.c
index 5ab95f1..6c15e33 100644
--- a/drivers/clk/clk-prima2.c
+++ b/drivers/clk/clk-prima2.c
@@ -1015,16 +1015,6 @@
},
};
-static struct of_device_id clkc_ids[] = {
- { .compatible = "sirf,prima2-clkc" },
- {},
-};
-
-static struct of_device_id rsc_ids[] = {
- { .compatible = "sirf,prima2-rsc" },
- {},
-};
-
enum prima2_clk_index {
/* 0 1 2 3 4 5 6 7 8 9 */
rtc, osc, pll1, pll2, pll3, mem, sys, security, dsp, gps,
@@ -1082,24 +1072,16 @@
static struct clk *prima2_clks[maxclk];
static struct clk_onecell_data clk_data;
-void __init sirfsoc_of_clk_init(void)
+static void __init sirfsoc_clk_init(struct device_node *np)
{
- struct device_node *np;
+ struct device_node *rscnp;
int i;
- np = of_find_matching_node(NULL, rsc_ids);
- if (!np)
- panic("unable to find compatible rsc node in dtb\n");
-
- sirfsoc_rsc_vbase = of_iomap(np, 0);
+ rscnp = of_find_compatible_node(NULL, NULL, "sirf,prima2-rsc");
+ sirfsoc_rsc_vbase = of_iomap(rscnp, 0);
if (!sirfsoc_rsc_vbase)
panic("unable to map rsc registers\n");
-
- of_node_put(np);
-
- np = of_find_matching_node(NULL, clkc_ids);
- if (!np)
- return;
+ of_node_put(rscnp);
sirfsoc_clk_vbase = of_iomap(np, 0);
if (!sirfsoc_clk_vbase)
@@ -1124,3 +1106,4 @@
of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
}
+CLK_OF_DECLARE(sirfsoc_clk, "sirf,prima2-clkc", sirfsoc_clk_init);
diff --git a/drivers/clk/clk-vt8500.c b/drivers/clk/clk-vt8500.c
index 82306f5..7fd5c5e 100644
--- a/drivers/clk/clk-vt8500.c
+++ b/drivers/clk/clk-vt8500.c
@@ -15,11 +15,14 @@
#include <linux/io.h>
#include <linux/of.h>
+#include <linux/of_address.h>
#include <linux/slab.h>
#include <linux/bitops.h>
#include <linux/clkdev.h>
#include <linux/clk-provider.h>
+#define LEGACY_PMC_BASE 0xD8130000
+
/* All clocks share the same lock as none can be changed concurrently */
static DEFINE_SPINLOCK(_lock);
@@ -53,6 +56,21 @@
static void __iomem *pmc_base;
+static __init void vtwm_set_pmc_base(void)
+{
+ struct device_node *np =
+ of_find_compatible_node(NULL, NULL, "via,vt8500-pmc");
+
+ if (np)
+ pmc_base = of_iomap(np, 0);
+ else
+ pmc_base = ioremap(LEGACY_PMC_BASE, 0x1000);
+ of_node_put(np);
+
+ if (!pmc_base)
+ pr_err("%s:of_iomap(pmc) failed\n", __func__);
+}
+
#define to_clk_device(_hw) container_of(_hw, struct clk_device, hw)
#define VT8500_PMC_BUSY_MASK 0x18
@@ -222,6 +240,9 @@
int rc;
int clk_init_flags = 0;
+ if (!pmc_base)
+ vtwm_set_pmc_base();
+
dev_clk = kzalloc(sizeof(*dev_clk), GFP_KERNEL);
if (WARN_ON(!dev_clk))
return;
@@ -636,6 +657,9 @@
struct clk_init_data init;
int rc;
+ if (!pmc_base)
+ vtwm_set_pmc_base();
+
rc = of_property_read_u32(node, "reg", ®);
if (WARN_ON(rc))
return;
@@ -694,13 +718,3 @@
vtwm_pll_clk_init(node, PLL_TYPE_WM8850);
}
CLK_OF_DECLARE(wm8850_pll, "wm,wm8850-pll-clock", wm8850_pll_init);
-
-void __init vtwm_clk_init(void __iomem *base)
-{
- if (!base)
- return;
-
- pmc_base = base;
-
- of_clk_init(NULL);
-}
diff --git a/drivers/clk/mxs/clk-imx23.c b/drivers/clk/mxs/clk-imx23.c
index c396fe3..9fc9359 100644
--- a/drivers/clk/mxs/clk-imx23.c
+++ b/drivers/clk/mxs/clk-imx23.c
@@ -12,6 +12,7 @@
#include <linux/clk.h>
#include <linux/clk/mxs.h>
#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
#include <linux/err.h>
#include <linux/init.h>
#include <linux/io.h>
@@ -100,16 +101,16 @@
cpu, hbus, xbus, emi, uart,
};
-int __init mx23_clocks_init(void)
+static void __init mx23_clocks_init(struct device_node *np)
{
- struct device_node *np;
+ struct device_node *dcnp;
u32 i;
- np = of_find_compatible_node(NULL, NULL, "fsl,imx23-digctl");
- digctrl = of_iomap(np, 0);
+ dcnp = of_find_compatible_node(NULL, NULL, "fsl,imx23-digctl");
+ digctrl = of_iomap(dcnp, 0);
WARN_ON(!digctrl);
+ of_node_put(dcnp);
- np = of_find_compatible_node(NULL, NULL, "fsl,imx23-clkctrl");
clkctrl = of_iomap(np, 0);
WARN_ON(!clkctrl);
@@ -162,7 +163,7 @@
if (IS_ERR(clks[i])) {
pr_err("i.MX23 clk %d: register failed with %ld\n",
i, PTR_ERR(clks[i]));
- return PTR_ERR(clks[i]);
+ return;
}
clk_data.clks = clks;
@@ -172,5 +173,5 @@
for (i = 0; i < ARRAY_SIZE(clks_init_on); i++)
clk_prepare_enable(clks[clks_init_on[i]]);
- return 0;
}
+CLK_OF_DECLARE(imx23_clkctrl, "fsl,imx23-clkctrl", mx23_clocks_init);
diff --git a/drivers/clk/mxs/clk-imx28.c b/drivers/clk/mxs/clk-imx28.c
index 4faf0af..a6c3501 100644
--- a/drivers/clk/mxs/clk-imx28.c
+++ b/drivers/clk/mxs/clk-imx28.c
@@ -12,6 +12,7 @@
#include <linux/clk.h>
#include <linux/clk/mxs.h>
#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
#include <linux/err.h>
#include <linux/init.h>
#include <linux/io.h>
@@ -154,16 +155,16 @@
cpu, hbus, xbus, emi, uart,
};
-int __init mx28_clocks_init(void)
+static void __init mx28_clocks_init(struct device_node *np)
{
- struct device_node *np;
+ struct device_node *dcnp;
u32 i;
- np = of_find_compatible_node(NULL, NULL, "fsl,imx28-digctl");
- digctrl = of_iomap(np, 0);
+ dcnp = of_find_compatible_node(NULL, NULL, "fsl,imx28-digctl");
+ digctrl = of_iomap(dcnp, 0);
WARN_ON(!digctrl);
+ of_node_put(dcnp);
- np = of_find_compatible_node(NULL, NULL, "fsl,imx28-clkctrl");
clkctrl = of_iomap(np, 0);
WARN_ON(!clkctrl);
@@ -239,7 +240,7 @@
if (IS_ERR(clks[i])) {
pr_err("i.MX28 clk %d: register failed with %ld\n",
i, PTR_ERR(clks[i]));
- return PTR_ERR(clks[i]);
+ return;
}
clk_data.clks = clks;
@@ -250,6 +251,5 @@
for (i = 0; i < ARRAY_SIZE(clks_init_on); i++)
clk_prepare_enable(clks[clks_init_on[i]]);
-
- return 0;
}
+CLK_OF_DECLARE(imx28_clkctrl, "fsl,imx28-clkctrl", mx28_clocks_init);
diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c
index 34ee69f..9bbd035 100644
--- a/drivers/clk/sunxi/clk-sunxi.c
+++ b/drivers/clk/sunxi/clk-sunxi.c
@@ -16,7 +16,6 @@
#include <linux/clk-provider.h>
#include <linux/clkdev.h>
-#include <linux/clk/sunxi.h>
#include <linux/of.h>
#include <linux/of_address.h>
@@ -617,11 +616,8 @@
}
}
-void __init sunxi_init_clocks(void)
+static void __init sunxi_init_clocks(struct device_node *np)
{
- /* Register all the simple and basic clocks on DT */
- of_clk_init(NULL);
-
/* Register factor clocks */
of_sunxi_table_clock_setup(clk_factors_match, sunxi_factors_clk_setup);
@@ -634,3 +630,8 @@
/* Register gate clocks */
of_sunxi_table_clock_setup(clk_gates_match, sunxi_gates_clk_setup);
}
+CLK_OF_DECLARE(sun4i_a10_clk_init, "allwinner,sun4i-a10", sunxi_init_clocks);
+CLK_OF_DECLARE(sun5i_a10s_clk_init, "allwinner,sun5i-a10s", sunxi_init_clocks);
+CLK_OF_DECLARE(sun5i_a13_clk_init, "allwinner,sun5i-a13", sunxi_init_clocks);
+CLK_OF_DECLARE(sun6i_a31_clk_init, "allwinner,sun6i-a31", sunxi_init_clocks);
+CLK_OF_DECLARE(sun7i_a20_clk_init, "allwinner,sun7i-a20", sunxi_init_clocks);
diff --git a/drivers/gpio/gpio-samsung.c b/drivers/gpio/gpio-samsung.c
index 358a21c..f6f1c7d 100644
--- a/drivers/gpio/gpio-samsung.c
+++ b/drivers/gpio/gpio-samsung.c
@@ -1033,7 +1033,7 @@
}
#endif
-#ifdef CONFIG_PLAT_S3C64XX
+#ifdef CONFIG_ARCH_S3C64XX
static int s3c64xx_gpiolib_mbank_to_irq(struct gpio_chip *chip, unsigned pin)
{
return pin < 5 ? IRQ_EINT(23) + pin : -ENXIO;
@@ -1174,7 +1174,7 @@
*/
static struct samsung_gpio_chip s3c64xx_gpios_4bit[] = {
-#ifdef CONFIG_PLAT_S3C64XX
+#ifdef CONFIG_ARCH_S3C64XX
{
.chip = {
.base = S3C64XX_GPA(0),
@@ -1227,7 +1227,7 @@
};
static struct samsung_gpio_chip s3c64xx_gpios_4bit2[] = {
-#ifdef CONFIG_PLAT_S3C64XX
+#ifdef CONFIG_ARCH_S3C64XX
{
.base = S3C64XX_GPH_BASE + 0x4,
.chip = {
@@ -1257,7 +1257,7 @@
};
static struct samsung_gpio_chip s3c64xx_gpios_2bit[] = {
-#ifdef CONFIG_PLAT_S3C64XX
+#ifdef CONFIG_ARCH_S3C64XX
{
.base = S3C64XX_GPF_BASE,
.config = &samsung_gpio_cfgs[6],
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index 02906ca..3f7f59c 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -197,8 +197,8 @@
config IDE_GENERIC
tristate "generic/default IDE chipset support"
- depends on ALPHA || X86 || IA64 || M32R || MIPS || ARCH_RPC || ARCH_SHARK
- default ARM && (ARCH_RPC || ARCH_SHARK)
+ depends on ALPHA || X86 || IA64 || M32R || MIPS || ARCH_RPC
+ default ARM && ARCH_RPC
help
This is the generic IDE driver. This driver attaches to the
fixed legacy ports (e.g. on PCs 0x1f0/0x170, 0x1e8/0x168 and
diff --git a/drivers/input/serio/Kconfig b/drivers/input/serio/Kconfig
index 33b3e88..1de1e5f 100644
--- a/drivers/input/serio/Kconfig
+++ b/drivers/input/serio/Kconfig
@@ -21,7 +21,7 @@
config SERIO_I8042
tristate "i8042 PC Keyboard controller" if EXPERT || !X86
default y
- depends on !PARISC && (!ARM || ARCH_SHARK || FOOTBRIDGE_HOST) && \
+ depends on !PARISC && (!ARM || FOOTBRIDGE_HOST) && \
(!SUPERH || SH_CAYMAN) && !M68K && !BLACKFIN && !S390 && \
!ARC
help
diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig
index c7caf94..eb70dda 100644
--- a/drivers/media/platform/Kconfig
+++ b/drivers/media/platform/Kconfig
@@ -112,7 +112,7 @@
config VIDEO_S3C_CAMIF
tristate "Samsung S3C24XX/S3C64XX SoC Camera Interface driver"
depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API
- depends on (PLAT_S3C64XX || PLAT_S3C24XX) && PM_RUNTIME
+ depends on (ARCH_S3C64XX || PLAT_S3C24XX) && PM_RUNTIME
select VIDEOBUF2_DMA_CONTIG
---help---
This is a v4l2 driver for s3c24xx and s3c64xx SoC series camera
diff --git a/drivers/video/cyber2000fb.c b/drivers/video/cyber2000fb.c
index 5788678..1c446bc 100644
--- a/drivers/video/cyber2000fb.c
+++ b/drivers/video/cyber2000fb.c
@@ -1641,67 +1641,6 @@
cyber2000fb_set_par(&cfb->fb);
}
-#ifdef CONFIG_ARCH_SHARK
-
-#include <mach/framebuffer.h>
-
-static int cyberpro_vl_probe(void)
-{
- struct cfb_info *cfb;
- int err = -ENOMEM;
-
- if (!request_mem_region(FB_START, FB_SIZE, "CyberPro2010"))
- return err;
-
- cfb = cyberpro_alloc_fb_info(ID_CYBERPRO_2010, "CyberPro2010");
- if (!cfb)
- goto failed_release;
-
- cfb->irq = -1;
- cfb->region = ioremap(FB_START, FB_SIZE);
- if (!cfb->region)
- goto failed_ioremap;
-
- cfb->regs = cfb->region + MMIO_OFFSET;
- cfb->fb.device = NULL;
- cfb->fb.fix.mmio_start = FB_START + MMIO_OFFSET;
- cfb->fb.fix.smem_start = FB_START;
-
- /*
- * Bring up the hardware. This is expected to enable access
- * to the linear memory region, and allow access to the memory
- * mapped registers. Also, mem_ctl1 and mem_ctl2 must be
- * initialised.
- */
- cyber2000fb_writeb(0x18, 0x46e8, cfb);
- cyber2000fb_writeb(0x01, 0x102, cfb);
- cyber2000fb_writeb(0x08, 0x46e8, cfb);
- cyber2000fb_writeb(EXT_BIU_MISC, 0x3ce, cfb);
- cyber2000fb_writeb(EXT_BIU_MISC_LIN_ENABLE, 0x3cf, cfb);
-
- cfb->mclk_mult = 0xdb;
- cfb->mclk_div = 0x54;
-
- err = cyberpro_common_probe(cfb);
- if (err)
- goto failed;
-
- if (int_cfb_info == NULL)
- int_cfb_info = cfb;
-
- return 0;
-
-failed:
- iounmap(cfb->region);
-failed_ioremap:
- cyberpro_free_fb_info(cfb);
-failed_release:
- release_mem_region(FB_START, FB_SIZE);
-
- return err;
-}
-#endif /* CONFIG_ARCH_SHARK */
-
/*
* PCI specific support.
*/
@@ -1948,28 +1887,19 @@
cyber2000fb_setup(option);
#endif
-#ifdef CONFIG_ARCH_SHARK
- err = cyberpro_vl_probe();
- if (!err)
- ret = 0;
-#endif
-#ifdef CONFIG_PCI
err = pci_register_driver(&cyberpro_driver);
if (!err)
ret = 0;
-#endif
return ret ? err : 0;
}
module_init(cyber2000fb_init);
-#ifndef CONFIG_ARCH_SHARK
static void __exit cyberpro_exit(void)
{
pci_unregister_driver(&cyberpro_driver);
}
module_exit(cyberpro_exit);
-#endif
MODULE_AUTHOR("Russell King");
MODULE_DESCRIPTION("CyberPro 2000, 2010 and 5000 framebuffer driver");
diff --git a/include/linux/clk/mxs.h b/include/linux/clk/mxs.h
index 90c30dc..5138a90 100644
--- a/include/linux/clk/mxs.h
+++ b/include/linux/clk/mxs.h
@@ -9,8 +9,6 @@
#ifndef __LINUX_CLK_MXS_H
#define __LINUX_CLK_MXS_H
-int mx23_clocks_init(void);
-int mx28_clocks_init(void);
int mxs_saif_clkmux_select(unsigned int clkmux);
#endif
diff --git a/include/linux/clk/sunxi.h b/include/linux/clk/sunxi.h
deleted file mode 100644
index e074fdd..0000000
--- a/include/linux/clk/sunxi.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * Copyright 2012 Maxime Ripard
- *
- * Maxime Ripard <maxime.ripard@free-electrons.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef __LINUX_CLK_SUNXI_H_
-#define __LINUX_CLK_SUNXI_H_
-
-void __init sunxi_init_clocks(void);
-
-#endif
diff --git a/include/linux/platform_data/clk-nomadik.h b/include/linux/platform_data/clk-nomadik.h
deleted file mode 100644
index 5713c87..0000000
--- a/include/linux/platform_data/clk-nomadik.h
+++ /dev/null
@@ -1,2 +0,0 @@
-/* Minimal platform data header */
-void nomadik_clk_init(void);
diff --git a/sound/soc/samsung/s3c-i2s-v2.c b/sound/soc/samsung/s3c-i2s-v2.c
index e5e81b1..fefc561 100644
--- a/sound/soc/samsung/s3c-i2s-v2.c
+++ b/sound/soc/samsung/s3c-i2s-v2.c
@@ -31,11 +31,7 @@
#undef S3C_IIS_V2_SUPPORTED
#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413) \
- || defined(CONFIG_CPU_S5PV210)
-#define S3C_IIS_V2_SUPPORTED
-#endif
-
-#ifdef CONFIG_PLAT_S3C64XX
+ || defined(CONFIG_ARCH_S3C64XX) || defined(CONFIG_CPU_S5PV210)
#define S3C_IIS_V2_SUPPORTED
#endif