ACPICA: Source restructuring: split large files into 8 new files.
Created logical splits for eight new files. Improves modularity
and configurability.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
diff --git a/drivers/acpi/acpica/utstring.c b/drivers/acpi/acpica/utstring.c
new file mode 100644
index 0000000..4170265
--- /dev/null
+++ b/drivers/acpi/acpica/utstring.c
@@ -0,0 +1,574 @@
+/*******************************************************************************
+ *
+ * Module Name: utstring - Common functions for strings and characters
+ *
+ ******************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2012, Intel Corp.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions, and the following disclaimer,
+ * without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ * substantially similar to the "NO WARRANTY" disclaimer below
+ * ("Disclaimer") and any redistribution must be conditioned upon
+ * including a substantially similar Disclaimer requirement for further
+ * binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ * of any contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#include <acpi/acpi.h>
+#include "accommon.h"
+#include "acnamesp.h"
+
+#define _COMPONENT ACPI_UTILITIES
+ACPI_MODULE_NAME("utstring")
+
+/*
+ * Non-ANSI C library functions - strlwr, strupr, stricmp, and a 64-bit
+ * version of strtoul.
+ */
+#ifdef ACPI_ASL_COMPILER
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_strlwr (strlwr)
+ *
+ * PARAMETERS: src_string - The source string to convert
+ *
+ * RETURN: None
+ *
+ * DESCRIPTION: Convert string to lowercase
+ *
+ * NOTE: This is not a POSIX function, so it appears here, not in utclib.c
+ *
+ ******************************************************************************/
+void acpi_ut_strlwr(char *src_string)
+{
+ char *string;
+
+ ACPI_FUNCTION_ENTRY();
+
+ if (!src_string) {
+ return;
+ }
+
+ /* Walk entire string, lowercasing the letters */
+
+ for (string = src_string; *string; string++) {
+ *string = (char)ACPI_TOLOWER(*string);
+ }
+
+ return;
+}
+
+/******************************************************************************
+ *
+ * FUNCTION: acpi_ut_stricmp (stricmp)
+ *
+ * PARAMETERS: string1 - first string to compare
+ * string2 - second string to compare
+ *
+ * RETURN: int that signifies string relationship. Zero means strings
+ * are equal.
+ *
+ * DESCRIPTION: Implementation of the non-ANSI stricmp function (compare
+ * strings with no case sensitivity)
+ *
+ ******************************************************************************/
+
+int acpi_ut_stricmp(char *string1, char *string2)
+{
+ int c1;
+ int c2;
+
+ do {
+ c1 = tolower((int)*string1);
+ c2 = tolower((int)*string2);
+
+ string1++;
+ string2++;
+ }
+ while ((c1 == c2) && (c1));
+
+ return (c1 - c2);
+}
+#endif
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_strupr (strupr)
+ *
+ * PARAMETERS: src_string - The source string to convert
+ *
+ * RETURN: None
+ *
+ * DESCRIPTION: Convert string to uppercase
+ *
+ * NOTE: This is not a POSIX function, so it appears here, not in utclib.c
+ *
+ ******************************************************************************/
+
+void acpi_ut_strupr(char *src_string)
+{
+ char *string;
+
+ ACPI_FUNCTION_ENTRY();
+
+ if (!src_string) {
+ return;
+ }
+
+ /* Walk entire string, uppercasing the letters */
+
+ for (string = src_string; *string; string++) {
+ *string = (char)ACPI_TOUPPER(*string);
+ }
+
+ return;
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_strtoul64
+ *
+ * PARAMETERS: string - Null terminated string
+ * base - Radix of the string: 16 or ACPI_ANY_BASE;
+ * ACPI_ANY_BASE means 'in behalf of to_integer'
+ * ret_integer - Where the converted integer is returned
+ *
+ * RETURN: Status and Converted value
+ *
+ * DESCRIPTION: Convert a string into an unsigned value. Performs either a
+ * 32-bit or 64-bit conversion, depending on the current mode
+ * of the interpreter.
+ * NOTE: Does not support Octal strings, not needed.
+ *
+ ******************************************************************************/
+
+acpi_status acpi_ut_strtoul64(char *string, u32 base, u64 *ret_integer)
+{
+ u32 this_digit = 0;
+ u64 return_value = 0;
+ u64 quotient;
+ u64 dividend;
+ u32 to_integer_op = (base == ACPI_ANY_BASE);
+ u32 mode32 = (acpi_gbl_integer_byte_width == 4);
+ u8 valid_digits = 0;
+ u8 sign_of0x = 0;
+ u8 term = 0;
+
+ ACPI_FUNCTION_TRACE_STR(ut_stroul64, string);
+
+ switch (base) {
+ case ACPI_ANY_BASE:
+ case 16:
+ break;
+
+ default:
+ /* Invalid Base */
+ return_ACPI_STATUS(AE_BAD_PARAMETER);
+ }
+
+ if (!string) {
+ goto error_exit;
+ }
+
+ /* Skip over any white space in the buffer */
+
+ while ((*string) && (ACPI_IS_SPACE(*string) || *string == '\t')) {
+ string++;
+ }
+
+ if (to_integer_op) {
+ /*
+ * Base equal to ACPI_ANY_BASE means 'ToInteger operation case'.
+ * We need to determine if it is decimal or hexadecimal.
+ */
+ if ((*string == '0') && (ACPI_TOLOWER(*(string + 1)) == 'x')) {
+ sign_of0x = 1;
+ base = 16;
+
+ /* Skip over the leading '0x' */
+ string += 2;
+ } else {
+ base = 10;
+ }
+ }
+
+ /* Any string left? Check that '0x' is not followed by white space. */
+
+ if (!(*string) || ACPI_IS_SPACE(*string) || *string == '\t') {
+ if (to_integer_op) {
+ goto error_exit;
+ } else {
+ goto all_done;
+ }
+ }
+
+ /*
+ * Perform a 32-bit or 64-bit conversion, depending upon the current
+ * execution mode of the interpreter
+ */
+ dividend = (mode32) ? ACPI_UINT32_MAX : ACPI_UINT64_MAX;
+
+ /* Main loop: convert the string to a 32- or 64-bit integer */
+
+ while (*string) {
+ if (ACPI_IS_DIGIT(*string)) {
+
+ /* Convert ASCII 0-9 to Decimal value */
+
+ this_digit = ((u8)*string) - '0';
+ } else if (base == 10) {
+
+ /* Digit is out of range; possible in to_integer case only */
+
+ term = 1;
+ } else {
+ this_digit = (u8)ACPI_TOUPPER(*string);
+ if (ACPI_IS_XDIGIT((char)this_digit)) {
+
+ /* Convert ASCII Hex char to value */
+
+ this_digit = this_digit - 'A' + 10;
+ } else {
+ term = 1;
+ }
+ }
+
+ if (term) {
+ if (to_integer_op) {
+ goto error_exit;
+ } else {
+ break;
+ }
+ } else if ((valid_digits == 0) && (this_digit == 0)
+ && !sign_of0x) {
+
+ /* Skip zeros */
+ string++;
+ continue;
+ }
+
+ valid_digits++;
+
+ if (sign_of0x
+ && ((valid_digits > 16)
+ || ((valid_digits > 8) && mode32))) {
+ /*
+ * This is to_integer operation case.
+ * No any restrictions for string-to-integer conversion,
+ * see ACPI spec.
+ */
+ goto error_exit;
+ }
+
+ /* Divide the digit into the correct position */
+
+ (void)acpi_ut_short_divide((dividend - (u64)this_digit),
+ base, "ient, NULL);
+
+ if (return_value > quotient) {
+ if (to_integer_op) {
+ goto error_exit;
+ } else {
+ break;
+ }
+ }
+
+ return_value *= base;
+ return_value += this_digit;
+ string++;
+ }
+
+ /* All done, normal exit */
+
+ all_done:
+
+ ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "Converted value: %8.8X%8.8X\n",
+ ACPI_FORMAT_UINT64(return_value)));
+
+ *ret_integer = return_value;
+ return_ACPI_STATUS(AE_OK);
+
+ error_exit:
+ /* Base was set/validated above */
+
+ if (base == 10) {
+ return_ACPI_STATUS(AE_BAD_DECIMAL_CONSTANT);
+ } else {
+ return_ACPI_STATUS(AE_BAD_HEX_CONSTANT);
+ }
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_print_string
+ *
+ * PARAMETERS: string - Null terminated ASCII string
+ * max_length - Maximum output length
+ *
+ * RETURN: None
+ *
+ * DESCRIPTION: Dump an ASCII string with support for ACPI-defined escape
+ * sequences.
+ *
+ ******************************************************************************/
+
+void acpi_ut_print_string(char *string, u8 max_length)
+{
+ u32 i;
+
+ if (!string) {
+ acpi_os_printf("<\"NULL STRING PTR\">");
+ return;
+ }
+
+ acpi_os_printf("\"");
+ for (i = 0; string[i] && (i < max_length); i++) {
+
+ /* Escape sequences */
+
+ switch (string[i]) {
+ case 0x07:
+ acpi_os_printf("\\a"); /* BELL */
+ break;
+
+ case 0x08:
+ acpi_os_printf("\\b"); /* BACKSPACE */
+ break;
+
+ case 0x0C:
+ acpi_os_printf("\\f"); /* FORMFEED */
+ break;
+
+ case 0x0A:
+ acpi_os_printf("\\n"); /* LINEFEED */
+ break;
+
+ case 0x0D:
+ acpi_os_printf("\\r"); /* CARRIAGE RETURN */
+ break;
+
+ case 0x09:
+ acpi_os_printf("\\t"); /* HORIZONTAL TAB */
+ break;
+
+ case 0x0B:
+ acpi_os_printf("\\v"); /* VERTICAL TAB */
+ break;
+
+ case '\'': /* Single Quote */
+ case '\"': /* Double Quote */
+ case '\\': /* Backslash */
+ acpi_os_printf("\\%c", (int)string[i]);
+ break;
+
+ default:
+
+ /* Check for printable character or hex escape */
+
+ if (ACPI_IS_PRINT(string[i])) {
+ /* This is a normal character */
+
+ acpi_os_printf("%c", (int)string[i]);
+ } else {
+ /* All others will be Hex escapes */
+
+ acpi_os_printf("\\x%2.2X", (s32) string[i]);
+ }
+ break;
+ }
+ }
+ acpi_os_printf("\"");
+
+ if (i == max_length && string[i]) {
+ acpi_os_printf("...");
+ }
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_valid_acpi_char
+ *
+ * PARAMETERS: char - The character to be examined
+ * position - Byte position (0-3)
+ *
+ * RETURN: TRUE if the character is valid, FALSE otherwise
+ *
+ * DESCRIPTION: Check for a valid ACPI character. Must be one of:
+ * 1) Upper case alpha
+ * 2) numeric
+ * 3) underscore
+ *
+ * We allow a '!' as the last character because of the ASF! table
+ *
+ ******************************************************************************/
+
+u8 acpi_ut_valid_acpi_char(char character, u32 position)
+{
+
+ if (!((character >= 'A' && character <= 'Z') ||
+ (character >= '0' && character <= '9') || (character == '_'))) {
+
+ /* Allow a '!' in the last position */
+
+ if (character == '!' && position == 3) {
+ return (TRUE);
+ }
+
+ return (FALSE);
+ }
+
+ return (TRUE);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_valid_acpi_name
+ *
+ * PARAMETERS: name - The name to be examined
+ *
+ * RETURN: TRUE if the name is valid, FALSE otherwise
+ *
+ * DESCRIPTION: Check for a valid ACPI name. Each character must be one of:
+ * 1) Upper case alpha
+ * 2) numeric
+ * 3) underscore
+ *
+ ******************************************************************************/
+
+u8 acpi_ut_valid_acpi_name(u32 name)
+{
+ u32 i;
+
+ ACPI_FUNCTION_ENTRY();
+
+ for (i = 0; i < ACPI_NAME_SIZE; i++) {
+ if (!acpi_ut_valid_acpi_char
+ ((ACPI_CAST_PTR(char, &name))[i], i)) {
+ return (FALSE);
+ }
+ }
+
+ return (TRUE);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_repair_name
+ *
+ * PARAMETERS: name - The ACPI name to be repaired
+ *
+ * RETURN: Repaired version of the name
+ *
+ * DESCRIPTION: Repair an ACPI name: Change invalid characters to '*' and
+ * return the new name. NOTE: the Name parameter must reside in
+ * read/write memory, cannot be a const.
+ *
+ * An ACPI Name must consist of valid ACPI characters. We will repair the name
+ * if necessary because we don't want to abort because of this, but we want
+ * all namespace names to be printable. A warning message is appropriate.
+ *
+ * This issue came up because there are in fact machines that exhibit
+ * this problem, and we want to be able to enable ACPI support for them,
+ * even though there are a few bad names.
+ *
+ ******************************************************************************/
+
+void acpi_ut_repair_name(char *name)
+{
+ u32 i;
+ u8 found_bad_char = FALSE;
+ u32 original_name;
+
+ ACPI_FUNCTION_NAME(ut_repair_name);
+
+ ACPI_MOVE_NAME(&original_name, name);
+
+ /* Check each character in the name */
+
+ for (i = 0; i < ACPI_NAME_SIZE; i++) {
+ if (acpi_ut_valid_acpi_char(name[i], i)) {
+ continue;
+ }
+
+ /*
+ * Replace a bad character with something printable, yet technically
+ * still invalid. This prevents any collisions with existing "good"
+ * names in the namespace.
+ */
+ name[i] = '*';
+ found_bad_char = TRUE;
+ }
+
+ if (found_bad_char) {
+
+ /* Report warning only if in strict mode or debug mode */
+
+ if (!acpi_gbl_enable_interpreter_slack) {
+ ACPI_WARNING((AE_INFO,
+ "Invalid character(s) in name (0x%.8X), repaired: [%4.4s]",
+ original_name, name));
+ } else {
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+ "Invalid character(s) in name (0x%.8X), repaired: [%4.4s]",
+ original_name, name));
+ }
+ }
+}
+
+#if defined ACPI_ASL_COMPILER || defined ACPI_EXEC_APP
+/*******************************************************************************
+ *
+ * FUNCTION: ut_convert_backslashes
+ *
+ * PARAMETERS: pathname - File pathname string to be converted
+ *
+ * RETURN: Modifies the input Pathname
+ *
+ * DESCRIPTION: Convert all backslashes (0x5C) to forward slashes (0x2F) within
+ * the entire input file pathname string.
+ *
+ ******************************************************************************/
+
+void ut_convert_backslashes(char *pathname)
+{
+
+ if (!pathname) {
+ return;
+ }
+
+ while (*pathname) {
+ if (*pathname == '\\') {
+ *pathname = '/';
+ }
+
+ pathname++;
+ }
+}
+#endif