mmc: tmio/sdhi: introduce flag for RCar 2+ specific features
RCar Gen2 and later implementations of TMIO/SDHI have their own set of
features and additions. FAST_CLK_CHG is just one of them and I see a few
others being added soon. Some may work on older chipsets but this needs
to be tested case by case. Instead of adding a bunch of flags for each
feature, add a global RCar2+ one for now. We can still break out
features if the need arises.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
diff --git a/drivers/mmc/host/sh_mobile_sdhi.c b/drivers/mmc/host/sh_mobile_sdhi.c
index 6857e4b..19e4c29 100644
--- a/drivers/mmc/host/sh_mobile_sdhi.c
+++ b/drivers/mmc/host/sh_mobile_sdhi.c
@@ -62,7 +62,7 @@
static const struct sh_mobile_sdhi_of_data of_rcar_gen2_compatible = {
.tmio_flags = TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_WRPROTECT_DISABLE |
- TMIO_MMC_CLK_ACTUAL | TMIO_MMC_FAST_CLK_CHG,
+ TMIO_MMC_CLK_ACTUAL | TMIO_MMC_MIN_RCAR2,
.capabilities = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ,
.dma_buswidth = DMA_SLAVE_BUSWIDTH_4_BYTES,
.dma_rx_offset = 0x2000,
@@ -70,7 +70,7 @@
static const struct sh_mobile_sdhi_of_data of_rcar_gen3_compatible = {
.tmio_flags = TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_WRPROTECT_DISABLE |
- TMIO_MMC_CLK_ACTUAL | TMIO_MMC_FAST_CLK_CHG,
+ TMIO_MMC_CLK_ACTUAL | TMIO_MMC_MIN_RCAR2,
.capabilities = MMC_CAP_SD_HIGHSPEED,
.bus_shift = 2,
};
diff --git a/drivers/mmc/host/tmio_mmc_pio.c b/drivers/mmc/host/tmio_mmc_pio.c
index 95f2299..f44e2ab 100644
--- a/drivers/mmc/host/tmio_mmc_pio.c
+++ b/drivers/mmc/host/tmio_mmc_pio.c
@@ -157,7 +157,7 @@
{
sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, CLK_CTL_SCLKEN |
sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL));
- msleep(host->pdata->flags & TMIO_MMC_FAST_CLK_CHG ? 1 : 10);
+ msleep(host->pdata->flags & TMIO_MMC_MIN_RCAR2 ? 1 : 10);
if (host->pdata->flags & TMIO_MMC_HAVE_HIGH_REG) {
sd_ctrl_write16(host, CTL_CLK_AND_WAIT_CTL, 0x0100);
@@ -174,7 +174,7 @@
sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, ~CLK_CTL_SCLKEN &
sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL));
- msleep(host->pdata->flags & TMIO_MMC_FAST_CLK_CHG ? 5 : 10);
+ msleep(host->pdata->flags & TMIO_MMC_MIN_RCAR2 ? 5 : 10);
}
static void tmio_mmc_set_clock(struct tmio_mmc_host *host,
@@ -205,7 +205,7 @@
sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, ~CLK_CTL_SCLKEN &
sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL));
sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, clk & CLK_CTL_DIV_MASK);
- if (!(host->pdata->flags & TMIO_MMC_FAST_CLK_CHG))
+ if (!(host->pdata->flags & TMIO_MMC_MIN_RCAR2))
msleep(10);
tmio_mmc_clk_start(host);
diff --git a/include/linux/mfd/tmio.h b/include/linux/mfd/tmio.h
index 05d58ee..7a26286 100644
--- a/include/linux/mfd/tmio.h
+++ b/include/linux/mfd/tmio.h
@@ -66,8 +66,8 @@
*/
#define TMIO_MMC_SDIO_IRQ (1 << 2)
-/* Some controllers don't need to wait 10ms for clock changes */
-#define TMIO_MMC_FAST_CLK_CHG (1 << 3)
+/* Some features are only available or tested on RCar Gen2 or later */
+#define TMIO_MMC_MIN_RCAR2 (1 << 3)
/*
* Some controllers require waiting for the SD bus to become