[CIFS] Fix cifs reconnection flags
In preparation for Jeff's big umount/mount fixes to remove the possibility of
various races in cifs mount and linked list handling of sessions, sockets and
tree connections, this patch cleans up some repetitive code in cifs_mount,
and addresses a problem with ses->status and tcon->tidStatus in which we
were overloading the "need_reconnect" state with other status in that
field. So the "need_reconnect" flag has been broken out from those
two state fields (need reconnect was not mutually exclusive from some of the
other possible tid and ses states). In addition, a few exit cases in
cifs_mount were cleaned up, and a problem with a tcon flag (for lease support)
was not being set consistently for the 2nd mount of the same share
CC: Jeff Layton <jlayton@redhat.com>
CC: Shirish Pargaonkar <shirishp@us.ibm.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index c682be8..c1cd121 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -149,7 +149,7 @@
ses = list_entry(tmp, struct cifsSesInfo, cifsSessionList);
if (ses->server) {
if (ses->server == server) {
- ses->status = CifsNeedReconnect;
+ ses->need_reconnect = true;
ses->ipc_tid = 0;
}
}
@@ -158,7 +158,7 @@
list_for_each(tmp, &GlobalTreeConnectionList) {
tcon = list_entry(tmp, struct cifsTconInfo, cifsConnectionList);
if ((tcon->ses) && (tcon->ses->server == server))
- tcon->tidStatus = CifsNeedReconnect;
+ tcon->need_reconnect = true;
}
read_unlock(&GlobalSMBSeslock);
/* do not want to be sending data on a socket we are freeing */
@@ -1891,6 +1891,92 @@
force_sig(SIGKILL, task);
}
+static void setup_cifs_sb(struct smb_vol *pvolume_info,
+ struct cifs_sb_info *cifs_sb)
+{
+ if (pvolume_info->rsize > CIFSMaxBufSize) {
+ cERROR(1, ("rsize %d too large, using MaxBufSize",
+ pvolume_info->rsize));
+ cifs_sb->rsize = CIFSMaxBufSize;
+ } else if ((pvolume_info->rsize) &&
+ (pvolume_info->rsize <= CIFSMaxBufSize))
+ cifs_sb->rsize = pvolume_info->rsize;
+ else /* default */
+ cifs_sb->rsize = CIFSMaxBufSize;
+
+ if (pvolume_info->wsize > PAGEVEC_SIZE * PAGE_CACHE_SIZE) {
+ cERROR(1, ("wsize %d too large, using 4096 instead",
+ pvolume_info->wsize));
+ cifs_sb->wsize = 4096;
+ } else if (pvolume_info->wsize)
+ cifs_sb->wsize = pvolume_info->wsize;
+ else
+ cifs_sb->wsize = min_t(const int,
+ PAGEVEC_SIZE * PAGE_CACHE_SIZE,
+ 127*1024);
+ /* old default of CIFSMaxBufSize was too small now
+ that SMB Write2 can send multiple pages in kvec.
+ RFC1001 does not describe what happens when frame
+ bigger than 128K is sent so use that as max in
+ conjunction with 52K kvec constraint on arch with 4K
+ page size */
+
+ if (cifs_sb->rsize < 2048) {
+ cifs_sb->rsize = 2048;
+ /* Windows ME may prefer this */
+ cFYI(1, ("readsize set to minimum: 2048"));
+ }
+ /* calculate prepath */
+ cifs_sb->prepath = pvolume_info->prepath;
+ if (cifs_sb->prepath) {
+ cifs_sb->prepathlen = strlen(cifs_sb->prepath);
+ /* we can not convert the / to \ in the path
+ separators in the prefixpath yet because we do not
+ know (until reset_cifs_unix_caps is called later)
+ whether POSIX PATH CAP is available. We normalize
+ the / to \ after reset_cifs_unix_caps is called */
+ pvolume_info->prepath = NULL;
+ } else
+ cifs_sb->prepathlen = 0;
+ cifs_sb->mnt_uid = pvolume_info->linux_uid;
+ cifs_sb->mnt_gid = pvolume_info->linux_gid;
+ cifs_sb->mnt_file_mode = pvolume_info->file_mode;
+ cifs_sb->mnt_dir_mode = pvolume_info->dir_mode;
+ cFYI(1, ("file mode: 0x%x dir mode: 0x%x",
+ cifs_sb->mnt_file_mode, cifs_sb->mnt_dir_mode));
+
+ if (pvolume_info->noperm)
+ cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_NO_PERM;
+ if (pvolume_info->setuids)
+ cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_SET_UID;
+ if (pvolume_info->server_ino)
+ cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_SERVER_INUM;
+ if (pvolume_info->remap)
+ cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_MAP_SPECIAL_CHR;
+ if (pvolume_info->no_xattr)
+ cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_NO_XATTR;
+ if (pvolume_info->sfu_emul)
+ cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_UNX_EMUL;
+ if (pvolume_info->nobrl)
+ cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_NO_BRL;
+ if (pvolume_info->cifs_acl)
+ cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_CIFS_ACL;
+ if (pvolume_info->override_uid)
+ cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_OVERR_UID;
+ if (pvolume_info->override_gid)
+ cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_OVERR_GID;
+ if (pvolume_info->dynperm)
+ cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_DYNPERM;
+ if (pvolume_info->direct_io) {
+ cFYI(1, ("mounting share using direct i/o"));
+ cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_DIRECT_IO;
+ }
+
+ if ((pvolume_info->cifs_acl) && (pvolume_info->dynperm))
+ cERROR(1, ("mount option dynperm ignored if cifsacl "
+ "mount option supported"));
+}
+
int
cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb,
char *mount_data, const char *devname)
@@ -1996,9 +2082,7 @@
goto out;
}
- if (srvTcp) {
- cFYI(1, ("Existing tcp session with server found"));
- } else { /* create socket */
+ if (!srvTcp) { /* create socket */
if (volume_info.port)
sin_server.sin_port = htons(volume_info.port);
else
@@ -2074,7 +2158,7 @@
cFYI(1, ("Existing smb sess found (status=%d)",
pSesInfo->status));
down(&pSesInfo->sesSem);
- if (pSesInfo->status == CifsNeedReconnect) {
+ if (pSesInfo->need_reconnect) {
cFYI(1, ("Session needs reconnect"));
rc = cifs_setup_session(xid, pSesInfo,
cifs_sb->local_nls);
@@ -2124,146 +2208,59 @@
/* search for existing tcon to this server share */
if (!rc) {
- if (volume_info.rsize > CIFSMaxBufSize) {
- cERROR(1, ("rsize %d too large, using MaxBufSize",
- volume_info.rsize));
- cifs_sb->rsize = CIFSMaxBufSize;
- } else if ((volume_info.rsize) &&
- (volume_info.rsize <= CIFSMaxBufSize))
- cifs_sb->rsize = volume_info.rsize;
- else /* default */
- cifs_sb->rsize = CIFSMaxBufSize;
-
- if (volume_info.wsize > PAGEVEC_SIZE * PAGE_CACHE_SIZE) {
- cERROR(1, ("wsize %d too large, using 4096 instead",
- volume_info.wsize));
- cifs_sb->wsize = 4096;
- } else if (volume_info.wsize)
- cifs_sb->wsize = volume_info.wsize;
- else
- cifs_sb->wsize =
- min_t(const int, PAGEVEC_SIZE * PAGE_CACHE_SIZE,
- 127*1024);
- /* old default of CIFSMaxBufSize was too small now
- that SMB Write2 can send multiple pages in kvec.
- RFC1001 does not describe what happens when frame
- bigger than 128K is sent so use that as max in
- conjunction with 52K kvec constraint on arch with 4K
- page size */
-
- if (cifs_sb->rsize < 2048) {
- cifs_sb->rsize = 2048;
- /* Windows ME may prefer this */
- cFYI(1, ("readsize set to minimum: 2048"));
- }
- /* calculate prepath */
- cifs_sb->prepath = volume_info.prepath;
- if (cifs_sb->prepath) {
- cifs_sb->prepathlen = strlen(cifs_sb->prepath);
- /* we can not convert the / to \ in the path
- separators in the prefixpath yet because we do not
- know (until reset_cifs_unix_caps is called later)
- whether POSIX PATH CAP is available. We normalize
- the / to \ after reset_cifs_unix_caps is called */
- volume_info.prepath = NULL;
- } else
- cifs_sb->prepathlen = 0;
- cifs_sb->mnt_uid = volume_info.linux_uid;
- cifs_sb->mnt_gid = volume_info.linux_gid;
- cifs_sb->mnt_file_mode = volume_info.file_mode;
- cifs_sb->mnt_dir_mode = volume_info.dir_mode;
- cFYI(1, ("file mode: 0x%x dir mode: 0x%x",
- cifs_sb->mnt_file_mode, cifs_sb->mnt_dir_mode));
-
- if (volume_info.noperm)
- cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_NO_PERM;
- if (volume_info.setuids)
- cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_SET_UID;
- if (volume_info.server_ino)
- cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_SERVER_INUM;
- if (volume_info.remap)
- cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_MAP_SPECIAL_CHR;
- if (volume_info.no_xattr)
- cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_NO_XATTR;
- if (volume_info.sfu_emul)
- cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_UNX_EMUL;
- if (volume_info.nobrl)
- cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_NO_BRL;
- if (volume_info.cifs_acl)
- cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_CIFS_ACL;
- if (volume_info.override_uid)
- cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_OVERR_UID;
- if (volume_info.override_gid)
- cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_OVERR_GID;
- if (volume_info.dynperm)
- cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_DYNPERM;
- if (volume_info.direct_io) {
- cFYI(1, ("mounting share using direct i/o"));
- cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_DIRECT_IO;
- }
-
- if ((volume_info.cifs_acl) && (volume_info.dynperm))
- cERROR(1, ("mount option dynperm ignored if cifsacl "
- "mount option supported"));
+ setup_cifs_sb(&volume_info, cifs_sb);
tcon =
find_unc(sin_server.sin_addr.s_addr, volume_info.UNC,
volume_info.username);
if (tcon) {
cFYI(1, ("Found match on UNC path"));
- /* we can have only one retry value for a connection
- to a share so for resources mounted more than once
- to the same server share the last value passed in
- for the retry flag is used */
- tcon->retry = volume_info.retry;
- tcon->nocase = volume_info.nocase;
- tcon->local_lease = volume_info.local_lease;
if (tcon->seal != volume_info.seal)
cERROR(1, ("transport encryption setting "
"conflicts with existing tid"));
} else {
tcon = tconInfoAlloc();
- if (tcon == NULL)
+ if (tcon == NULL) {
rc = -ENOMEM;
- else {
- /* check for null share name ie connecting to
- * dfs root */
+ goto mount_fail_check;
+ }
- /* BB check if this works for exactly length
- * three strings */
- if ((strchr(volume_info.UNC + 3, '\\') == NULL)
- && (strchr(volume_info.UNC + 3, '/') ==
- NULL)) {
-/* rc = connect_to_dfs_path(xid, pSesInfo,
- "", cifs_sb->local_nls,
- cifs_sb->mnt_cifs_flags &
- CIFS_MOUNT_MAP_SPECIAL_CHR);*/
- cFYI(1, ("DFS root not supported"));
- rc = -ENODEV;
- goto out;
- } else {
- /* BB Do we need to wrap sesSem around
- * this TCon call and Unix SetFS as
- * we do on SessSetup and reconnect? */
- rc = CIFSTCon(xid, pSesInfo,
- volume_info.UNC,
- tcon, cifs_sb->local_nls);
- cFYI(1, ("CIFS Tcon rc = %d", rc));
- if (volume_info.nodfs) {
- tcon->Flags &=
- ~SMB_SHARE_IS_IN_DFS;
- cFYI(1, ("DFS disabled (%d)",
- tcon->Flags));
- }
- }
- if (!rc) {
- atomic_inc(&pSesInfo->inUse);
- tcon->retry = volume_info.retry;
- tcon->nocase = volume_info.nocase;
- tcon->seal = volume_info.seal;
+ /* check for null share name ie connect to dfs root */
+
+ /* BB check if works for exactly length 3 strings */
+ if ((strchr(volume_info.UNC + 3, '\\') == NULL)
+ && (strchr(volume_info.UNC + 3, '/') == NULL)) {
+ /* rc = connect_to_dfs_path(...) */
+ cFYI(1, ("DFS root not supported"));
+ rc = -ENODEV;
+ goto mount_fail_check;
+ } else {
+ /* BB Do we need to wrap sesSem around
+ * this TCon call and Unix SetFS as
+ * we do on SessSetup and reconnect? */
+ rc = CIFSTCon(xid, pSesInfo, volume_info.UNC,
+ tcon, cifs_sb->local_nls);
+ cFYI(1, ("CIFS Tcon rc = %d", rc));
+ if (volume_info.nodfs) {
+ tcon->Flags &= ~SMB_SHARE_IS_IN_DFS;
+ cFYI(1, ("DFS disabled (%d)",
+ tcon->Flags));
}
}
+ if (!rc) {
+ atomic_inc(&pSesInfo->inUse);
+ tcon->seal = volume_info.seal;
+ } else
+ goto mount_fail_check;
}
+
+ /* we can have only one retry value for a connection
+ to a share so for resources mounted more than once
+ to the same server share the last value passed in
+ for the retry flag is used */
+ tcon->retry = volume_info.retry;
+ tcon->nocase = volume_info.nocase;
+ tcon->local_lease = volume_info.local_lease;
}
if (pSesInfo) {
if (pSesInfo->capabilities & CAP_LARGE_FILES) {
@@ -2276,6 +2273,7 @@
sb->s_time_gran = 100;
/* on error free sesinfo and tcon struct if needed */
+mount_fail_check:
if (rc) {
/* if session setup failed, use count is zero but
we still need to free cifsd thread */
@@ -3518,6 +3516,7 @@
/* above now done in SendReceive */
if ((rc == 0) && (tcon != NULL)) {
tcon->tidStatus = CifsGood;
+ tcon->need_reconnect = false;
tcon->tid = smb_buffer_response->Tid;
bcc_ptr = pByteArea(smb_buffer_response);
length = strnlen(bcc_ptr, BCC(smb_buffer_response) - 2);
@@ -3746,6 +3745,7 @@
cFYI(1, ("CIFS Session Established successfully"));
spin_lock(&GlobalMid_Lock);
pSesInfo->status = CifsGood;
+ pSesInfo->need_reconnect = false;
spin_unlock(&GlobalMid_Lock);
}