{cfg,nl}80211: mesh power mode primitives and userspace access
Add the nl80211_mesh_power_mode enumeration which holds possible
values for the mesh power mode. These modes are unknown, active,
light sleep and deep sleep.
Add power_mode entry to the mesh config structure to hold the
user-configured default mesh power mode. This value will be used
for new peer links.
Add the dot11MeshAwakeWindowDuration value to the mesh config.
The awake window is a duration in TU describing how long the STA
will stay awake after transmitting its beacon in PS mode.
Add access routines to:
- get/set local link-specific power mode (STA)
- get remote STA's link-specific power mode (STA)
- get remote STA's non-peer power mode (STA)
- get/set default mesh power mode (mesh config)
- get/set mesh awake window duration (mesh config)
All config changes may be done at mesh runtime and take effect
immediately.
Signed-off-by: Marco Porsch <marco@cozybit.com>
Signed-off-by: Ivan Bezyazychnyy <ivan.bezyazychnyy@gmail.com>
Signed-off-by: Mike Krinkin <krinkin.m.u@gmail.com>
[fix commit message line length, error handling in set station]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
diff --git a/net/wireless/mesh.c b/net/wireless/mesh.c
index 0fe8ceb..55957a2 100644
--- a/net/wireless/mesh.c
+++ b/net/wireless/mesh.c
@@ -46,6 +46,7 @@
#define MESH_DEFAULT_BEACON_INTERVAL 1000 /* in 1024 us units (=TUs) */
#define MESH_DEFAULT_DTIM_PERIOD 2
+#define MESH_DEFAULT_AWAKE_WINDOW 10 /* in 1024 us units (=TUs) */
const struct mesh_config default_mesh_config = {
.dot11MeshRetryTimeout = MESH_RET_T,
@@ -72,6 +73,8 @@
.dot11MeshHWMPactivePathToRootTimeout = MESH_PATH_TO_ROOT_TIMEOUT,
.dot11MeshHWMProotInterval = MESH_ROOT_INTERVAL,
.dot11MeshHWMPconfirmationInterval = MESH_ROOT_CONFIRMATION_INTERVAL,
+ .power_mode = NL80211_MESH_POWER_ACTIVE,
+ .dot11MeshAwakeWindowDuration = MESH_DEFAULT_AWAKE_WINDOW,
};
const struct mesh_setup default_mesh_setup = {
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index d5842eb..1a7a710 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -3001,6 +3001,18 @@
nla_put_u32(msg, NL80211_STA_INFO_BEACON_LOSS,
sinfo->beacon_loss_count))
goto nla_put_failure;
+ if ((sinfo->filled & STATION_INFO_LOCAL_PM) &&
+ nla_put_u32(msg, NL80211_STA_INFO_LOCAL_PM,
+ sinfo->local_pm))
+ goto nla_put_failure;
+ if ((sinfo->filled & STATION_INFO_PEER_PM) &&
+ nla_put_u32(msg, NL80211_STA_INFO_PEER_PM,
+ sinfo->peer_pm))
+ goto nla_put_failure;
+ if ((sinfo->filled & STATION_INFO_NONPEER_PM) &&
+ nla_put_u32(msg, NL80211_STA_INFO_NONPEER_PM,
+ sinfo->nonpeer_pm))
+ goto nla_put_failure;
if (sinfo->filled & STATION_INFO_BSS_PARAM) {
bss_param = nla_nest_start(msg, NL80211_STA_INFO_BSS_PARAM);
if (!bss_param)
@@ -3206,6 +3218,17 @@
params.plink_state =
nla_get_u8(info->attrs[NL80211_ATTR_STA_PLINK_STATE]);
+ if (info->attrs[NL80211_ATTR_LOCAL_MESH_POWER_MODE]) {
+ enum nl80211_mesh_power_mode pm = nla_get_u32(
+ info->attrs[NL80211_ATTR_LOCAL_MESH_POWER_MODE]);
+
+ if (pm <= NL80211_MESH_POWER_UNKNOWN ||
+ pm > NL80211_MESH_POWER_MAX)
+ return -EINVAL;
+
+ params.local_pm = pm;
+ }
+
switch (dev->ieee80211_ptr->iftype) {
case NL80211_IFTYPE_AP:
case NL80211_IFTYPE_AP_VLAN:
@@ -3213,6 +3236,8 @@
/* disallow mesh-specific things */
if (params.plink_action)
return -EINVAL;
+ if (params.local_pm)
+ return -EINVAL;
/* TDLS can't be set, ... */
if (params.sta_flags_set & BIT(NL80211_STA_FLAG_TDLS_PEER))
@@ -3265,6 +3290,8 @@
/* disallow things sta doesn't support */
if (params.plink_action)
return -EINVAL;
+ if (params.local_pm)
+ return -EINVAL;
/* reject any changes other than AUTHORIZED */
if (params.sta_flags_mask & ~BIT(NL80211_STA_FLAG_AUTHORIZED))
return -EINVAL;
@@ -3922,7 +3949,11 @@
nla_put_u16(msg, NL80211_MESHCONF_HWMP_ROOT_INTERVAL,
cur_params.dot11MeshHWMProotInterval) ||
nla_put_u16(msg, NL80211_MESHCONF_HWMP_CONFIRMATION_INTERVAL,
- cur_params.dot11MeshHWMPconfirmationInterval))
+ cur_params.dot11MeshHWMPconfirmationInterval) ||
+ nla_put_u32(msg, NL80211_MESHCONF_POWER_MODE,
+ cur_params.power_mode) ||
+ nla_put_u16(msg, NL80211_MESHCONF_AWAKE_WINDOW,
+ cur_params.dot11MeshAwakeWindowDuration))
goto nla_put_failure;
nla_nest_end(msg, pinfoattr);
genlmsg_end(msg, hdr);
@@ -3961,6 +3992,8 @@
[NL80211_MESHCONF_HWMP_PATH_TO_ROOT_TIMEOUT] = { .type = NLA_U32 },
[NL80211_MESHCONF_HWMP_ROOT_INTERVAL] = { .type = NLA_U16 },
[NL80211_MESHCONF_HWMP_CONFIRMATION_INTERVAL] = { .type = NLA_U16 },
+ [NL80211_MESHCONF_POWER_MODE] = { .type = NLA_U32 },
+ [NL80211_MESHCONF_AWAKE_WINDOW] = { .type = NLA_U16 },
};
static const struct nla_policy
@@ -4088,6 +4121,14 @@
1, 65535, mask,
NL80211_MESHCONF_HWMP_CONFIRMATION_INTERVAL,
nla_get_u16);
+ FILL_IN_MESH_PARAM_IF_SET(tb, cfg, power_mode,
+ NL80211_MESH_POWER_ACTIVE,
+ NL80211_MESH_POWER_MAX,
+ mask, NL80211_MESHCONF_POWER_MODE,
+ nla_get_u32);
+ FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshAwakeWindowDuration,
+ 0, 65535, mask,
+ NL80211_MESHCONF_AWAKE_WINDOW, nla_get_u16);
if (mask_out)
*mask_out = mask;