isp1704_charger: Allow board specific powering routine
The ISP1704/1707 chip can be put to full power down
state by asserting the CHIP_SEL line. This patch enables
platform or board specific hooks to put the device into
power down mode in case not needed.
This patch is a preparation for enabling this powering
routine in n900 (rx-51) devices.
Thanks to Heikki Krogerus for helping out with the patch.
Signed-off-by: Kalle Jokiniemi <kalle.jokiniemi@nokia.com>
Acked-By: Heikki Krogerus <heikki.krogerus@nokia.com>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
diff --git a/drivers/power/isp1704_charger.c b/drivers/power/isp1704_charger.c
index 2ad9b14..f6d72b4 100644
--- a/drivers/power/isp1704_charger.c
+++ b/drivers/power/isp1704_charger.c
@@ -33,6 +33,7 @@
#include <linux/usb/ulpi.h>
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
+#include <linux/power/isp1704_charger.h>
/* Vendor specific Power Control register */
#define ISP1704_PWR_CTRL 0x3d
@@ -71,6 +72,18 @@
};
/*
+ * Disable/enable the power from the isp1704 if a function for it
+ * has been provided with platform data.
+ */
+static void isp1704_charger_set_power(struct isp1704_charger *isp, bool on)
+{
+ struct isp1704_charger_data *board = isp->dev->platform_data;
+
+ if (board->set_power)
+ board->set_power(on);
+}
+
+/*
* Determine is the charging port DCP (dedicated charger) or CDP (Host/HUB
* chargers).
*
@@ -222,6 +235,9 @@
mutex_lock(&lock);
+ if (event != USB_EVENT_NONE)
+ isp1704_charger_set_power(isp, 1);
+
switch (event) {
case USB_EVENT_VBUS:
isp->online = true;
@@ -269,6 +285,8 @@
*/
if (isp->otg->gadget)
usb_gadget_disconnect(isp->otg->gadget);
+
+ isp1704_charger_set_power(isp, 0);
break;
case USB_EVENT_ENUMERATED:
if (isp->present)
@@ -394,6 +412,8 @@
isp->dev = &pdev->dev;
platform_set_drvdata(pdev, isp);
+ isp1704_charger_set_power(isp, 1);
+
ret = isp1704_test_ulpi(isp);
if (ret < 0)
goto fail1;
@@ -434,6 +454,7 @@
/* Detect charger if VBUS is valid (the cable was already plugged). */
ret = otg_io_read(isp->otg, ULPI_USB_INT_STS);
+ isp1704_charger_set_power(isp, 0);
if ((ret & ULPI_INT_VBUS_VALID) && !isp->otg->default_a) {
isp->event = USB_EVENT_VBUS;
schedule_work(&isp->work);
@@ -459,6 +480,7 @@
otg_unregister_notifier(isp->otg, &isp->nb);
power_supply_unregister(&isp->psy);
otg_put_transceiver(isp->otg);
+ isp1704_charger_set_power(isp, 0);
kfree(isp);
return 0;