Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits)
Update broken web addresses in arch directory.
Update broken web addresses in the kernel.
Revert "drivers/usb: Remove unnecessary return's from void functions" for musb gadget
Revert "Fix typo: configuation => configuration" partially
ida: document IDA_BITMAP_LONGS calculation
ext2: fix a typo on comment in ext2/inode.c
drivers/scsi: Remove unnecessary casts of private_data
drivers/s390: Remove unnecessary casts of private_data
net/sunrpc/rpc_pipe.c: Remove unnecessary casts of private_data
drivers/infiniband: Remove unnecessary casts of private_data
drivers/gpu/drm: Remove unnecessary casts of private_data
kernel/pm_qos_params.c: Remove unnecessary casts of private_data
fs/ecryptfs: Remove unnecessary casts of private_data
fs/seq_file.c: Remove unnecessary casts of private_data
arm: uengine.c: remove C99 comments
arm: scoop.c: remove C99 comments
Fix typo configue => configure in comments
Fix typo: configuation => configuration
Fix typo interrest[ing|ed] => interest[ing|ed]
Fix various typos of valid in comments
...
Fix up trivial conflicts in:
drivers/char/ipmi/ipmi_si_intf.c
drivers/usb/gadget/rndis.c
net/irda/irnet/irnet_ppp.c
diff --git a/Documentation/arm/SA1100/FreeBird b/Documentation/arm/SA1100/FreeBird
index fb23b77..ab91936 100644
--- a/Documentation/arm/SA1100/FreeBird
+++ b/Documentation/arm/SA1100/FreeBird
@@ -1,6 +1,6 @@
-Freebird-1.1 is produced by Legned(C) ,Inc.
+Freebird-1.1 is produced by Legend(C), Inc.
http://web.archive.org/web/*/http://www.legend.com.cn
-and software/linux mainatined by Coventive(C),Inc.
+and software/linux maintained by Coventive(C), Inc.
(http://www.coventive.com)
Based on the Nicolas's strongarm kernel tree.
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 9533af7..0b68155 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -1724,7 +1724,7 @@
norandmaps Don't use address space randomization. Equivalent to
echo 0 > /proc/sys/kernel/randomize_va_space
- noreplace-paravirt [X86-32,PV_OPS] Don't patch paravirt_ops
+ noreplace-paravirt [X86,IA-64,PV_OPS] Don't patch paravirt_ops
noreplace-smp [X86-32,SMP] Don't replace SMP instructions
with UP alternatives
diff --git a/Documentation/vm/numa_memory_policy.txt b/Documentation/vm/numa_memory_policy.txt
index 6690fc3..4e7da65 100644
--- a/Documentation/vm/numa_memory_policy.txt
+++ b/Documentation/vm/numa_memory_policy.txt
@@ -424,7 +424,7 @@
+ set the shared policy for a shared memory segment via mbind(2)
-The numactl(8) tool is packages with the run-time version of the library
+The numactl(8) tool is packaged with the run-time version of the library
containing the memory policy system call wrappers. Some distributions
package the headers and compile-time libraries in a separate development
package.
diff --git a/MAINTAINERS b/MAINTAINERS
index 23a4ca9..69aa8fe 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3441,7 +3441,7 @@
KERNEL JANITORS
L: kernel-janitors@vger.kernel.org
-W: http://janitor.kernelnewbies.org/
+W: http://kernelnewbies.org/KernelJanitors
S: Odd Fixes
KERNEL NFSD, SUNRPC, AND LOCKD SERVERS
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 3849887..b64e465 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1222,7 +1222,7 @@
See also <file:Documentation/i386/IO-APIC.txt>,
<file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at
- <http://www.linuxdoc.org/docs.html#howto>.
+ <http://tldp.org/HOWTO/SMP-HOWTO.html>.
If you don't know what to do here, say N.
diff --git a/arch/arm/common/icst.c b/arch/arm/common/icst.c
index 9a7f09c..2dc6da70 100644
--- a/arch/arm/common/icst.c
+++ b/arch/arm/common/icst.c
@@ -8,7 +8,7 @@
* published by the Free Software Foundation.
*
* Support functions for calculating clocks/divisors for the ICST307
- * clock generators. See http://www.icst.com/ for more information
+ * clock generators. See http://www.idt.com/ for more information
* on these devices.
*
* This is an almost identical implementation to the ICST525 clock generator.
diff --git a/arch/arm/common/scoop.c b/arch/arm/common/scoop.c
index 9012004..c11af1e 100644
--- a/arch/arm/common/scoop.c
+++ b/arch/arm/common/scoop.c
@@ -44,12 +44,12 @@
{
struct scoop_dev *sdev = dev_get_drvdata(dev);
- iowrite16(0x0100, sdev->base + SCOOP_MCR); // 00
- iowrite16(0x0000, sdev->base + SCOOP_CDR); // 04
- iowrite16(0x0000, sdev->base + SCOOP_CCR); // 10
- iowrite16(0x0000, sdev->base + SCOOP_IMR); // 18
- iowrite16(0x00FF, sdev->base + SCOOP_IRM); // 14
- iowrite16(0x0000, sdev->base + SCOOP_ISR); // 1C
+ iowrite16(0x0100, sdev->base + SCOOP_MCR); /* 00 */
+ iowrite16(0x0000, sdev->base + SCOOP_CDR); /* 04 */
+ iowrite16(0x0000, sdev->base + SCOOP_CCR); /* 10 */
+ iowrite16(0x0000, sdev->base + SCOOP_IMR); /* 18 */
+ iowrite16(0x00FF, sdev->base + SCOOP_IRM); /* 14 */
+ iowrite16(0x0000, sdev->base + SCOOP_ISR); /* 1C */
iowrite16(0x0000, sdev->base + SCOOP_IRM);
}
diff --git a/arch/arm/common/uengine.c b/arch/arm/common/uengine.c
index b520e56..bef408f 100644
--- a/arch/arm/common/uengine.c
+++ b/arch/arm/common/uengine.c
@@ -312,16 +312,16 @@
b1 = (gpr_a[i] >> 8) & 0xff;
b0 = gpr_a[i] & 0xff;
- // immed[@ai, (b1 << 8) | b0]
- // 11110000 0000VVVV VVVV11VV VVVVVV00 1IIIIIII
+ /* immed[@ai, (b1 << 8) | b0] */
+ /* 11110000 0000VVVV VVVV11VV VVVVVV00 1IIIIIII */
ucode[offset++] = 0xf0;
ucode[offset++] = (b1 >> 4);
ucode[offset++] = (b1 << 4) | 0x0c | (b0 >> 6);
ucode[offset++] = (b0 << 2);
ucode[offset++] = 0x80 | i;
- // immed_w1[@ai, (b3 << 8) | b2]
- // 11110100 0100VVVV VVVV11VV VVVVVV00 1IIIIIII
+ /* immed_w1[@ai, (b3 << 8) | b2] */
+ /* 11110100 0100VVVV VVVV11VV VVVVVV00 1IIIIIII */
ucode[offset++] = 0xf4;
ucode[offset++] = 0x40 | (b3 >> 4);
ucode[offset++] = (b3 << 4) | 0x0c | (b2 >> 6);
@@ -340,16 +340,16 @@
b1 = (gpr_b[i] >> 8) & 0xff;
b0 = gpr_b[i] & 0xff;
- // immed[@bi, (b1 << 8) | b0]
- // 11110000 0000VVVV VVVV001I IIIIII11 VVVVVVVV
+ /* immed[@bi, (b1 << 8) | b0] */
+ /* 11110000 0000VVVV VVVV001I IIIIII11 VVVVVVVV */
ucode[offset++] = 0xf0;
ucode[offset++] = (b1 >> 4);
ucode[offset++] = (b1 << 4) | 0x02 | (i >> 6);
ucode[offset++] = (i << 2) | 0x03;
ucode[offset++] = b0;
- // immed_w1[@bi, (b3 << 8) | b2]
- // 11110100 0100VVVV VVVV001I IIIIII11 VVVVVVVV
+ /* immed_w1[@bi, (b3 << 8) | b2] */
+ /* 11110100 0100VVVV VVVV001I IIIIII11 VVVVVVVV */
ucode[offset++] = 0xf4;
ucode[offset++] = 0x40 | (b3 >> 4);
ucode[offset++] = (b3 << 4) | 0x02 | (i >> 6);
@@ -357,7 +357,7 @@
ucode[offset++] = b2;
}
- // ctx_arb[kill]
+ /* ctx_arb[kill] */
ucode[offset++] = 0xe0;
ucode[offset++] = 0x00;
ucode[offset++] = 0x01;
diff --git a/arch/arm/include/asm/hardware/icst.h b/arch/arm/include/asm/hardware/icst.h
index 10382a3..794220b 100644
--- a/arch/arm/include/asm/hardware/icst.h
+++ b/arch/arm/include/asm/hardware/icst.h
@@ -8,7 +8,7 @@
* published by the Free Software Foundation.
*
* Support functions for calculating clocks/divisors for the ICST
- * clock generators. See http://www.icst.com/ for more information
+ * clock generators. See http://www.idt.com/ for more information
* on these devices.
*/
#ifndef ASMARM_HARDWARE_ICST_H
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 851e813..abed4d1 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -109,7 +109,7 @@
bool "Ajeco 1ARM Single Board Computer"
help
Select this if you are using Ajeco's 1ARM Single Board Computer.
- <http://www.ajeco.fi/products.htm>
+ <http://www.ajeco.fi/>
config ARCH_AT91RM9200DK
bool "Atmel AT91RM9200-DK Development board"
@@ -141,7 +141,7 @@
bool "Conitec ARM&EVA"
help
Select this if you are using Conitec's AT91RM9200-MCU-Module.
- <http://www.conitec.net/english/linuxboard.htm>
+ <http://www.conitec.net/english/linuxboard.php>
config MACH_ATEB9200
bool "Embest ATEB9200"
@@ -153,7 +153,7 @@
bool "KwikByte KB920x"
help
Select this if you are using KwikByte's KB920x board.
- <http://kwikbyte.com/KB9202_description_new.htm>
+ <http://www.kwikbyte.com/KB9202.html>
config MACH_PICOTUX2XX
bool "picotux 200"
diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig
index 3b02d3b..5f64963 100644
--- a/arch/arm/mach-omap1/Kconfig
+++ b/arch/arm/mach-omap1/Kconfig
@@ -128,7 +128,7 @@
help
Support for the Palm Tungsten|T PDA. To boot the kernel, you'll
need a PalmOS compatible bootloader (Garux); check out
- http://www.hackndev.com/palm/tt/ for more information.
+ http://garux.sourceforge.net/ for more information.
Say Y here if you have this PDA model, say N otherwise.
config MACH_SX1
diff --git a/arch/arm/mach-omap2/hsmmc.h b/arch/arm/mach-omap2/hsmmc.h
index 1fe6f01..0f8a2e6 100644
--- a/arch/arm/mach-omap2/hsmmc.h
+++ b/arch/arm/mach-omap2/hsmmc.h
@@ -23,7 +23,7 @@
char *name; /* or NULL for default */
struct device *dev; /* returned: pointer to mmc adapter */
int ocr_mask; /* temporary HACK */
- /* Remux (pad configuation) when powering on/off */
+ /* Remux (pad configuration) when powering on/off */
void (*remux)(struct device *dev, int slot, int power_on);
/* init some special card */
void (*init_card)(struct mmc_card *card);
diff --git a/arch/arm/mach-s3c2440/mach-at2440evb.c b/arch/arm/mach-s3c2440/mach-at2440evb.c
index e3810c8..6c98b78 100644
--- a/arch/arm/mach-s3c2440/mach-at2440evb.c
+++ b/arch/arm/mach-s3c2440/mach-at2440evb.c
@@ -5,7 +5,7 @@
* and modifications by SBZ <sbz@spgui.org> and
* Weibing <http://weibing.blogbus.com>
*
- * For product information, visit http://www.arm9e.com/
+ * For product information, visit http://www.arm.com/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
diff --git a/arch/arm/mach-sa1100/Kconfig b/arch/arm/mach-sa1100/Kconfig
index fd4c52b..5da8c35 100644
--- a/arch/arm/mach-sa1100/Kconfig
+++ b/arch/arm/mach-sa1100/Kconfig
@@ -90,8 +90,8 @@
# FIXME: select CPU_FREQ_SA11x0
help
Say Y here if you want to build a kernel for the HP Jornada 720
- handheld computer. See <http://www.hp.com/jornada/products/720>
- for details.
+ handheld computer. See
+ <http://h10025.www1.hp.com/ewfrf/wc/product?product=61677&cc=us&lc=en&dlc=en&product=61677#>
config SA1100_JORNADA720_SSP
bool "HP Jornada 720 Extended SSP driver"
@@ -145,7 +145,7 @@
FLASH. The SL4 version got 64 MB RAM and 32 MB FLASH and a
PCMCIA-Slot. The version for the Germany Telecom (DTAG) is the same
like CL4 in additional it has a PCMCIA-Slot. For more information
- visit <http://www.my-siemens.com/> or <http://www.siemens.ch/>.
+ visit <http://www.usa.siemens.com/> or <http://www.siemens.ch/>.
config SA1100_SSP
tristate "Generic PIO SSP"
diff --git a/arch/arm/mach-sa1100/cpu-sa1100.c b/arch/arm/mach-sa1100/cpu-sa1100.c
index ef81787..c0a13ef 100644
--- a/arch/arm/mach-sa1100/cpu-sa1100.c
+++ b/arch/arm/mach-sa1100/cpu-sa1100.c
@@ -13,7 +13,7 @@
* This software has been developed while working on the LART
* computing board (http://www.lartmaker.nl/), which is
* sponsored by the Mobile Multi-media Communications
- * (http://www.mmc.tudelft.nl/) and Ubiquitous Communications
+ * (http://www.mobimedia.org/) and Ubiquitous Communications
* (http://www.ubicom.tudelft.nl/) projects.
*
* The authors can be reached at:
diff --git a/arch/arm/nwfpe/milieu.h b/arch/arm/nwfpe/milieu.h
index a3892ab..09a4f2d 100644
--- a/arch/arm/nwfpe/milieu.h
+++ b/arch/arm/nwfpe/milieu.h
@@ -12,8 +12,8 @@
of this code was written as part of a project to build a fixed-point vector
processor in collaboration with the University of California at Berkeley,
overseen by Profs. Nelson Morgan and John Wawrzynek. More information
-is available through the Web page `http://HTTP.CS.Berkeley.EDU/~jhauser/
-arithmetic/softfloat.html'.
+is available through the Web page
+http://www.jhauser.us/arithmetic/SoftFloat-2b/SoftFloat-source.txt
THIS SOFTWARE IS DISTRIBUTED AS IS, FOR FREE. Although reasonable effort
has been made to avoid it, THIS SOFTWARE MAY CONTAIN FAULTS THAT WILL AT
diff --git a/arch/arm/nwfpe/softfloat-macros b/arch/arm/nwfpe/softfloat-macros
index 5a060f9..cf2a617 100644
--- a/arch/arm/nwfpe/softfloat-macros
+++ b/arch/arm/nwfpe/softfloat-macros
@@ -12,8 +12,8 @@
of this code was written as part of a project to build a fixed-point vector
processor in collaboration with the University of California at Berkeley,
overseen by Profs. Nelson Morgan and John Wawrzynek. More information
-is available through the web page `http://HTTP.CS.Berkeley.EDU/~jhauser/
-arithmetic/softfloat.html'.
+is available through the web page
+http://www.jhauser.us/arithmetic/SoftFloat-2b/SoftFloat-source.txt
THIS SOFTWARE IS DISTRIBUTED AS IS, FOR FREE. Although reasonable effort
has been made to avoid it, THIS SOFTWARE MAY CONTAIN FAULTS THAT WILL AT
diff --git a/arch/arm/nwfpe/softfloat-specialize b/arch/arm/nwfpe/softfloat-specialize
index d4a4c8e..679a026 100644
--- a/arch/arm/nwfpe/softfloat-specialize
+++ b/arch/arm/nwfpe/softfloat-specialize
@@ -12,8 +12,8 @@
of this code was written as part of a project to build a fixed-point vector
processor in collaboration with the University of California at Berkeley,
overseen by Profs. Nelson Morgan and John Wawrzynek. More information
-is available through the Web page `http://HTTP.CS.Berkeley.EDU/~jhauser/
-arithmetic/softfloat.html'.
+is available through the Web page
+http://www.jhauser.us/arithmetic/SoftFloat-2b/SoftFloat-source.txt
THIS SOFTWARE IS DISTRIBUTED AS IS, FOR FREE. Although reasonable effort
has been made to avoid it, THIS SOFTWARE MAY CONTAIN FAULTS THAT WILL AT
diff --git a/arch/arm/nwfpe/softfloat.c b/arch/arm/nwfpe/softfloat.c
index 0f9656e..ffa6b43 100644
--- a/arch/arm/nwfpe/softfloat.c
+++ b/arch/arm/nwfpe/softfloat.c
@@ -11,8 +11,8 @@
of this code was written as part of a project to build a fixed-point vector
processor in collaboration with the University of California at Berkeley,
overseen by Profs. Nelson Morgan and John Wawrzynek. More information
-is available through the web page `http://HTTP.CS.Berkeley.EDU/~jhauser/
-arithmetic/softfloat.html'.
+is available through the web page
+http://www.jhauser.us/arithmetic/SoftFloat-2b/SoftFloat-source.txt
THIS SOFTWARE IS DISTRIBUTED AS IS, FOR FREE. Although reasonable effort
has been made to avoid it, THIS SOFTWARE MAY CONTAIN FAULTS THAT WILL AT
diff --git a/arch/arm/nwfpe/softfloat.h b/arch/arm/nwfpe/softfloat.h
index 13e479c..df4d243 100644
--- a/arch/arm/nwfpe/softfloat.h
+++ b/arch/arm/nwfpe/softfloat.h
@@ -12,8 +12,8 @@
of this code was written as part of a project to build a fixed-point vector
processor in collaboration with the University of California at Berkeley,
overseen by Profs. Nelson Morgan and John Wawrzynek. More information
-is available through the Web page `http://HTTP.CS.Berkeley.EDU/~jhauser/
-arithmetic/softfloat.html'.
+is available through the Web page
+http://www.jhauser.us/arithmetic/SoftFloat-2b/SoftFloat-source.txt
THIS SOFTWARE IS DISTRIBUTED AS IS, FOR FREE. Although reasonable effort
has been made to avoid it, THIS SOFTWARE MAY CONTAIN FAULTS THAT WILL AT
diff --git a/arch/arm/plat-samsung/include/plat/adc.h b/arch/arm/plat-samsung/include/plat/adc.h
index e8382c7..b258a08 100644
--- a/arch/arm/plat-samsung/include/plat/adc.h
+++ b/arch/arm/plat-samsung/include/plat/adc.h
@@ -1,7 +1,7 @@
/* arch/arm/plat-samsung/include/plat/adc.h
*
* Copyright (c) 2008 Simtec Electronics
- * http://armlinux.simnte.co.uk/
+ * http://armlinux.simtec.co.uk/
* Ben Dooks <ben@simtec.co.uk>
*
* S3C ADC driver information
diff --git a/arch/avr32/Kconfig b/arch/avr32/Kconfig
index 9ac8725..f0dc5b8 100644
--- a/arch/avr32/Kconfig
+++ b/arch/avr32/Kconfig
@@ -146,7 +146,7 @@
will cover even the most exceptional need of memory bandwidth. Together with the onboard
video decoder the board is ready for video processing.
- For more information see: http://www.miromico.com/hammerhead
+ For more information see: http://www.miromico.ch/index.php/hammerhead.html
config BOARD_FAVR_32
bool "Favr-32 LCD-board"
diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c
index 07c132d..df82723 100644
--- a/arch/blackfin/mach-bf527/boards/ezkit.c
+++ b/arch/blackfin/mach-bf527/boards/ezkit.c
@@ -887,7 +887,7 @@
};
/*
- * ADP5520/5501 Multifuction Device Init Data
+ * ADP5520/5501 Multifunction Device Init Data
*/
static struct adp5520_platform_data adp5520_pdev_data = {
diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c
index c9e0e85..cd2c797 100644
--- a/arch/blackfin/mach-bf537/boards/stamp.c
+++ b/arch/blackfin/mach-bf537/boards/stamp.c
@@ -2015,7 +2015,7 @@
};
/*
- * ADP5520/5501 Multifuction Device Init Data
+ * ADP5520/5501 Multifunction Device Init Data
*/
static struct adp5520_platform_data adp5520_pdev_data = {
diff --git a/arch/h8300/Kconfig.cpu b/arch/h8300/Kconfig.cpu
index 6e2ecff..d236ab4 100644
--- a/arch/h8300/Kconfig.cpu
+++ b/arch/h8300/Kconfig.cpu
@@ -17,7 +17,7 @@
help
AKI-H8/3068F / AKI-H8/3069F Flashmicom LAN Board Support
More Information. (Japanese Only)
- <http://akizukidensi.com/catalog/h8.html>
+ <http://akizukidenshi.com/catalog/default.aspx>
AE-3068/69 Evaluation Board Support
More Information.
<http://www.microtronique.com/ae3069lan.htm>
@@ -36,7 +36,7 @@
help
GDB Simulator Support
More Information.
- arch/h8300/Doc/simulator.txt
+ <http://sourceware.org/sid/>
config H8S_GENERIC
bool "H8S Generic"
@@ -50,14 +50,14 @@
Renesas EDOSK-2674 Evaluation Board Support
More Information.
<http://www.azpower.com/H8-uClinux/index.html>
- <http://www.eu.renesas.com/tools/edk/support/edosk2674.html>
+ <http://www.renesas.eu/products/tools/introductory_evaluation_tools/evaluation_development_os_kits/edosk2674r/edosk2674r_software_tools_root.jsp>
config H8S_SIM
bool "H8S Simulator"
help
GDB Simulator Support
More Information.
- arch/h8300/Doc/simulator.txt
+ <http://sourceware.org/sid/>
endchoice
diff --git a/arch/h8300/README b/arch/h8300/README
index 2fd6f6d..637f5a0 100644
--- a/arch/h8300/README
+++ b/arch/h8300/README
@@ -18,6 +18,7 @@
4.EDOSK2674
see http://www.eu.renesas.com/products/mpumcu/tool/edk/support/edosk2674.html
+ http://www.uclinux.org/pub/uClinux/ports/h8/HITACHI-EDOSK2674-HOWTO
http://www.azpower.com/H8-uClinux/
* Toolchain Version
diff --git a/arch/m32r/Kconfig b/arch/m32r/Kconfig
index 836abbb..3867fd2 100644
--- a/arch/m32r/Kconfig
+++ b/arch/m32r/Kconfig
@@ -315,7 +315,7 @@
Management" code will be disabled if you say Y here.
See also the SMP-HOWTO available at
- <http://www.linuxdoc.org/docs.html#howto>.
+ <http://tldp.org/HOWTO/SMP-HOWTO.html>.
If you don't know what to do here, say N.
diff --git a/arch/m68k/mac/macboing.c b/arch/m68k/mac/macboing.c
index 05285d0..ffaa1f6 100644
--- a/arch/m68k/mac/macboing.c
+++ b/arch/m68k/mac/macboing.c
@@ -114,7 +114,8 @@
* 16-bit I/O functionality. The PowerBook 500 series computers
* support 16-bit stereo output, but only mono input."
*
- * http://til.info.apple.com/techinfo.nsf/artnum/n16405
+ * Technical Information Library (TIL) article number 16405.
+ * http://support.apple.com/kb/TA32601
*
* --David Kilzer
*/
diff --git a/arch/m68k/q40/README b/arch/m68k/q40/README
index 6bdbf48..f877b72 100644
--- a/arch/m68k/q40/README
+++ b/arch/m68k/q40/README
@@ -3,7 +3,7 @@
You may try http://www.geocities.com/SiliconValley/Bay/2602/ for
some up to date information. Booter and other tools will be also
-available from this place or ftp.uni-erlangen.de/linux/680x0/q40/
+available from this place or http://ftp.uni-erlangen.de/pub/unix/Linux/680x0/q40/
and mirrors.
Hints to documentation usually refer to the linux source tree in
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 4c9f402..784cf82 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -2196,10 +2196,14 @@
bool "TURBOchannel support"
depends on MACH_DECSTATION
help
- TurboChannel is a DEC (now Compaq (now HP)) bus for Alpha and MIPS
- processors. Documentation on writing device drivers for TurboChannel
- is available at:
- <http://www.cs.arizona.edu/computer.help/policy/DIGITAL_unix/AA-PS3HD-TET1_html/TITLE.html>.
+ TURBOchannel is a DEC (now Compaq (now HP)) bus for Alpha and MIPS
+ processors. TURBOchannel programming specifications are available
+ at:
+ <ftp://ftp.hp.com/pub/alphaserver/archive/triadd/>
+ and:
+ <http://www.computer-refuge.org/classiccmp/ftp.digital.com/pub/DEC/TriAdd/>
+ Linux driver support status is documented at:
+ <http://www.linux-mips.org/wiki/DECstation>
#config ACCESSBUS
# bool "Access.Bus support"
diff --git a/arch/mips/math-emu/cp1emu.c b/arch/mips/math-emu/cp1emu.c
index 47842b7..ec3faa4 100644
--- a/arch/mips/math-emu/cp1emu.c
+++ b/arch/mips/math-emu/cp1emu.c
@@ -3,7 +3,6 @@
*
* MIPS floating point support
* Copyright (C) 1994-2000 Algorithmics Ltd.
- * http://www.algor.co.uk
*
* Kevin D. Kissell, kevink@mips.com and Carsten Langgaard, carstenl@mips.com
* Copyright (C) 2000 MIPS Technologies, Inc.
diff --git a/arch/mips/math-emu/dp_add.c b/arch/mips/math-emu/dp_add.c
index bcf73bb..b422fca 100644
--- a/arch/mips/math-emu/dp_add.c
+++ b/arch/mips/math-emu/dp_add.c
@@ -4,7 +4,6 @@
/*
* MIPS floating point support
* Copyright (C) 1994-2000 Algorithmics Ltd.
- * http://www.algor.co.uk
*
* ########################################################################
*
diff --git a/arch/mips/math-emu/dp_cmp.c b/arch/mips/math-emu/dp_cmp.c
index 8ab4f32..0f32486 100644
--- a/arch/mips/math-emu/dp_cmp.c
+++ b/arch/mips/math-emu/dp_cmp.c
@@ -4,7 +4,6 @@
/*
* MIPS floating point support
* Copyright (C) 1994-2000 Algorithmics Ltd.
- * http://www.algor.co.uk
*
* ########################################################################
*
diff --git a/arch/mips/math-emu/dp_div.c b/arch/mips/math-emu/dp_div.c
index 6acedce..a1bce1b 100644
--- a/arch/mips/math-emu/dp_div.c
+++ b/arch/mips/math-emu/dp_div.c
@@ -4,7 +4,6 @@
/*
* MIPS floating point support
* Copyright (C) 1994-2000 Algorithmics Ltd.
- * http://www.algor.co.uk
*
* ########################################################################
*
diff --git a/arch/mips/math-emu/dp_fint.c b/arch/mips/math-emu/dp_fint.c
index 39a71de1..8857128 100644
--- a/arch/mips/math-emu/dp_fint.c
+++ b/arch/mips/math-emu/dp_fint.c
@@ -4,7 +4,6 @@
/*
* MIPS floating point support
* Copyright (C) 1994-2000 Algorithmics Ltd.
- * http://www.algor.co.uk
*
* ########################################################################
*
diff --git a/arch/mips/math-emu/dp_flong.c b/arch/mips/math-emu/dp_flong.c
index f08f223..14fc01e 100644
--- a/arch/mips/math-emu/dp_flong.c
+++ b/arch/mips/math-emu/dp_flong.c
@@ -4,7 +4,6 @@
/*
* MIPS floating point support
* Copyright (C) 1994-2000 Algorithmics Ltd.
- * http://www.algor.co.uk
*
* ########################################################################
*
diff --git a/arch/mips/math-emu/dp_frexp.c b/arch/mips/math-emu/dp_frexp.c
index e650cb1..cb15a5e 100644
--- a/arch/mips/math-emu/dp_frexp.c
+++ b/arch/mips/math-emu/dp_frexp.c
@@ -4,7 +4,6 @@
/*
* MIPS floating point support
* Copyright (C) 1994-2000 Algorithmics Ltd.
- * http://www.algor.co.uk
*
* ########################################################################
*
diff --git a/arch/mips/math-emu/dp_fsp.c b/arch/mips/math-emu/dp_fsp.c
index 494d19a..1dfbd92 100644
--- a/arch/mips/math-emu/dp_fsp.c
+++ b/arch/mips/math-emu/dp_fsp.c
@@ -4,7 +4,6 @@
/*
* MIPS floating point support
* Copyright (C) 1994-2000 Algorithmics Ltd.
- * http://www.algor.co.uk
*
* ########################################################################
*
diff --git a/arch/mips/math-emu/dp_logb.c b/arch/mips/math-emu/dp_logb.c
index 6033886..151127e 100644
--- a/arch/mips/math-emu/dp_logb.c
+++ b/arch/mips/math-emu/dp_logb.c
@@ -4,7 +4,6 @@
/*
* MIPS floating point support
* Copyright (C) 1994-2000 Algorithmics Ltd.
- * http://www.algor.co.uk
*
* ########################################################################
*
diff --git a/arch/mips/math-emu/dp_modf.c b/arch/mips/math-emu/dp_modf.c
index a8570e5..b01f9cf 100644
--- a/arch/mips/math-emu/dp_modf.c
+++ b/arch/mips/math-emu/dp_modf.c
@@ -4,7 +4,6 @@
/*
* MIPS floating point support
* Copyright (C) 1994-2000 Algorithmics Ltd.
- * http://www.algor.co.uk
*
* ########################################################################
*
diff --git a/arch/mips/math-emu/dp_mul.c b/arch/mips/math-emu/dp_mul.c
index 48908a8..aa566e7 100644
--- a/arch/mips/math-emu/dp_mul.c
+++ b/arch/mips/math-emu/dp_mul.c
@@ -4,7 +4,6 @@
/*
* MIPS floating point support
* Copyright (C) 1994-2000 Algorithmics Ltd.
- * http://www.algor.co.uk
*
* ########################################################################
*
diff --git a/arch/mips/math-emu/dp_scalb.c b/arch/mips/math-emu/dp_scalb.c
index b84e633..6f5df43 100644
--- a/arch/mips/math-emu/dp_scalb.c
+++ b/arch/mips/math-emu/dp_scalb.c
@@ -4,7 +4,6 @@
/*
* MIPS floating point support
* Copyright (C) 1994-2000 Algorithmics Ltd.
- * http://www.algor.co.uk
*
* ########################################################################
*
diff --git a/arch/mips/math-emu/dp_simple.c b/arch/mips/math-emu/dp_simple.c
index b909742..79ce267 100644
--- a/arch/mips/math-emu/dp_simple.c
+++ b/arch/mips/math-emu/dp_simple.c
@@ -4,7 +4,6 @@
/*
* MIPS floating point support
* Copyright (C) 1994-2000 Algorithmics Ltd.
- * http://www.algor.co.uk
*
* ########################################################################
*
diff --git a/arch/mips/math-emu/dp_sqrt.c b/arch/mips/math-emu/dp_sqrt.c
index 032328c..a2a51b8 100644
--- a/arch/mips/math-emu/dp_sqrt.c
+++ b/arch/mips/math-emu/dp_sqrt.c
@@ -4,7 +4,6 @@
/*
* MIPS floating point support
* Copyright (C) 1994-2000 Algorithmics Ltd.
- * http://www.algor.co.uk
*
* ########################################################################
*
diff --git a/arch/mips/math-emu/dp_sub.c b/arch/mips/math-emu/dp_sub.c
index a2127d6..0de098c 100644
--- a/arch/mips/math-emu/dp_sub.c
+++ b/arch/mips/math-emu/dp_sub.c
@@ -4,7 +4,6 @@
/*
* MIPS floating point support
* Copyright (C) 1994-2000 Algorithmics Ltd.
- * http://www.algor.co.uk
*
* ########################################################################
*
diff --git a/arch/mips/math-emu/dp_tint.c b/arch/mips/math-emu/dp_tint.c
index 2447862..0ebe859 100644
--- a/arch/mips/math-emu/dp_tint.c
+++ b/arch/mips/math-emu/dp_tint.c
@@ -4,7 +4,6 @@
/*
* MIPS floating point support
* Copyright (C) 1994-2000 Algorithmics Ltd.
- * http://www.algor.co.uk
*
* ########################################################################
*
diff --git a/arch/mips/math-emu/dp_tlong.c b/arch/mips/math-emu/dp_tlong.c
index 0f07ec2..133ce2b 100644
--- a/arch/mips/math-emu/dp_tlong.c
+++ b/arch/mips/math-emu/dp_tlong.c
@@ -4,7 +4,6 @@
/*
* MIPS floating point support
* Copyright (C) 1994-2000 Algorithmics Ltd.
- * http://www.algor.co.uk
*
* ########################################################################
*
diff --git a/arch/mips/math-emu/ieee754.c b/arch/mips/math-emu/ieee754.c
index cb1b682..30554e1 100644
--- a/arch/mips/math-emu/ieee754.c
+++ b/arch/mips/math-emu/ieee754.c
@@ -9,7 +9,6 @@
/*
* MIPS floating point support
* Copyright (C) 1994-2000 Algorithmics Ltd.
- * http://www.algor.co.uk
*
* ########################################################################
*
diff --git a/arch/mips/math-emu/ieee754.h b/arch/mips/math-emu/ieee754.h
index dd91733..22796e0 100644
--- a/arch/mips/math-emu/ieee754.h
+++ b/arch/mips/math-emu/ieee754.h
@@ -1,7 +1,6 @@
/*
* MIPS floating point support
* Copyright (C) 1994-2000 Algorithmics Ltd.
- * http://www.algor.co.uk
*
* This program is free software; you can distribute it and/or modify it
* under the terms of the GNU General Public License (Version 2) as
diff --git a/arch/mips/math-emu/ieee754d.c b/arch/mips/math-emu/ieee754d.c
index a032533..9599bdd 100644
--- a/arch/mips/math-emu/ieee754d.c
+++ b/arch/mips/math-emu/ieee754d.c
@@ -4,7 +4,6 @@
* MIPS floating point support
*
* Copyright (C) 1994-2000 Algorithmics Ltd.
- * http://www.algor.co.uk
*
* This program is free software; you can distribute it and/or modify it
* under the terms of the GNU General Public License (Version 2) as
diff --git a/arch/mips/math-emu/ieee754dp.c b/arch/mips/math-emu/ieee754dp.c
index 2f22fd7..080b5ca 100644
--- a/arch/mips/math-emu/ieee754dp.c
+++ b/arch/mips/math-emu/ieee754dp.c
@@ -4,7 +4,6 @@
/*
* MIPS floating point support
* Copyright (C) 1994-2000 Algorithmics Ltd.
- * http://www.algor.co.uk
*
* ########################################################################
*
diff --git a/arch/mips/math-emu/ieee754dp.h b/arch/mips/math-emu/ieee754dp.h
index 7627865..f139c72 100644
--- a/arch/mips/math-emu/ieee754dp.h
+++ b/arch/mips/math-emu/ieee754dp.h
@@ -5,7 +5,6 @@
/*
* MIPS floating point support
* Copyright (C) 1994-2000 Algorithmics Ltd.
- * http://www.algor.co.uk
*
* ########################################################################
*
diff --git a/arch/mips/math-emu/ieee754int.h b/arch/mips/math-emu/ieee754int.h
index 1a846c5..2701d95 100644
--- a/arch/mips/math-emu/ieee754int.h
+++ b/arch/mips/math-emu/ieee754int.h
@@ -5,7 +5,6 @@
/*
* MIPS floating point support
* Copyright (C) 1994-2000 Algorithmics Ltd.
- * http://www.algor.co.uk
*
* ########################################################################
*
diff --git a/arch/mips/math-emu/ieee754m.c b/arch/mips/math-emu/ieee754m.c
index d66896c..24190f3 100644
--- a/arch/mips/math-emu/ieee754m.c
+++ b/arch/mips/math-emu/ieee754m.c
@@ -4,7 +4,6 @@
/*
* MIPS floating point support
* Copyright (C) 1994-2000 Algorithmics Ltd.
- * http://www.algor.co.uk
*
* ########################################################################
*
diff --git a/arch/mips/math-emu/ieee754sp.c b/arch/mips/math-emu/ieee754sp.c
index a19b721..271d00d 100644
--- a/arch/mips/math-emu/ieee754sp.c
+++ b/arch/mips/math-emu/ieee754sp.c
@@ -4,7 +4,6 @@
/*
* MIPS floating point support
* Copyright (C) 1994-2000 Algorithmics Ltd.
- * http://www.algor.co.uk
*
* ########################################################################
*
diff --git a/arch/mips/math-emu/ieee754sp.h b/arch/mips/math-emu/ieee754sp.h
index d9e3586..754fd54 100644
--- a/arch/mips/math-emu/ieee754sp.h
+++ b/arch/mips/math-emu/ieee754sp.h
@@ -5,7 +5,6 @@
/*
* MIPS floating point support
* Copyright (C) 1994-2000 Algorithmics Ltd.
- * http://www.algor.co.uk
*
* ########################################################################
*
diff --git a/arch/mips/math-emu/ieee754xcpt.c b/arch/mips/math-emu/ieee754xcpt.c
index e02423a..b99a693 100644
--- a/arch/mips/math-emu/ieee754xcpt.c
+++ b/arch/mips/math-emu/ieee754xcpt.c
@@ -1,7 +1,6 @@
/*
* MIPS floating point support
* Copyright (C) 1994-2000 Algorithmics Ltd.
- * http://www.algor.co.uk
*
* ########################################################################
*
diff --git a/arch/mips/math-emu/sp_add.c b/arch/mips/math-emu/sp_add.c
index d8c4211..ae1a327 100644
--- a/arch/mips/math-emu/sp_add.c
+++ b/arch/mips/math-emu/sp_add.c
@@ -4,7 +4,6 @@
/*
* MIPS floating point support
* Copyright (C) 1994-2000 Algorithmics Ltd.
- * http://www.algor.co.uk
*
* ########################################################################
*
diff --git a/arch/mips/math-emu/sp_cmp.c b/arch/mips/math-emu/sp_cmp.c
index d3eff6b..716cf37 100644
--- a/arch/mips/math-emu/sp_cmp.c
+++ b/arch/mips/math-emu/sp_cmp.c
@@ -4,7 +4,6 @@
/*
* MIPS floating point support
* Copyright (C) 1994-2000 Algorithmics Ltd.
- * http://www.algor.co.uk
*
* ########################################################################
*
diff --git a/arch/mips/math-emu/sp_div.c b/arch/mips/math-emu/sp_div.c
index 2b437fc..d774792 100644
--- a/arch/mips/math-emu/sp_div.c
+++ b/arch/mips/math-emu/sp_div.c
@@ -4,7 +4,6 @@
/*
* MIPS floating point support
* Copyright (C) 1994-2000 Algorithmics Ltd.
- * http://www.algor.co.uk
*
* ########################################################################
*
diff --git a/arch/mips/math-emu/sp_fdp.c b/arch/mips/math-emu/sp_fdp.c
index 4093723..e1515aa 100644
--- a/arch/mips/math-emu/sp_fdp.c
+++ b/arch/mips/math-emu/sp_fdp.c
@@ -4,7 +4,6 @@
/*
* MIPS floating point support
* Copyright (C) 1994-2000 Algorithmics Ltd.
- * http://www.algor.co.uk
*
* ########################################################################
*
diff --git a/arch/mips/math-emu/sp_fint.c b/arch/mips/math-emu/sp_fint.c
index e88e125..9694d6c 100644
--- a/arch/mips/math-emu/sp_fint.c
+++ b/arch/mips/math-emu/sp_fint.c
@@ -4,7 +4,6 @@
/*
* MIPS floating point support
* Copyright (C) 1994-2000 Algorithmics Ltd.
- * http://www.algor.co.uk
*
* ########################################################################
*
diff --git a/arch/mips/math-emu/sp_flong.c b/arch/mips/math-emu/sp_flong.c
index 26d6919..16a651f 100644
--- a/arch/mips/math-emu/sp_flong.c
+++ b/arch/mips/math-emu/sp_flong.c
@@ -4,7 +4,6 @@
/*
* MIPS floating point support
* Copyright (C) 1994-2000 Algorithmics Ltd.
- * http://www.algor.co.uk
*
* ########################################################################
*
diff --git a/arch/mips/math-emu/sp_frexp.c b/arch/mips/math-emu/sp_frexp.c
index 359c648..5bc993c 100644
--- a/arch/mips/math-emu/sp_frexp.c
+++ b/arch/mips/math-emu/sp_frexp.c
@@ -4,7 +4,6 @@
/*
* MIPS floating point support
* Copyright (C) 1994-2000 Algorithmics Ltd.
- * http://www.algor.co.uk
*
* ########################################################################
*
diff --git a/arch/mips/math-emu/sp_logb.c b/arch/mips/math-emu/sp_logb.c
index 3c33721..9c14e0c 100644
--- a/arch/mips/math-emu/sp_logb.c
+++ b/arch/mips/math-emu/sp_logb.c
@@ -4,7 +4,6 @@
/*
* MIPS floating point support
* Copyright (C) 1994-2000 Algorithmics Ltd.
- * http://www.algor.co.uk
*
* ########################################################################
*
diff --git a/arch/mips/math-emu/sp_modf.c b/arch/mips/math-emu/sp_modf.c
index 7656894..25a0fba 100644
--- a/arch/mips/math-emu/sp_modf.c
+++ b/arch/mips/math-emu/sp_modf.c
@@ -4,7 +4,6 @@
/*
* MIPS floating point support
* Copyright (C) 1994-2000 Algorithmics Ltd.
- * http://www.algor.co.uk
*
* ########################################################################
*
diff --git a/arch/mips/math-emu/sp_mul.c b/arch/mips/math-emu/sp_mul.c
index 3f070f8..c06bb402 100644
--- a/arch/mips/math-emu/sp_mul.c
+++ b/arch/mips/math-emu/sp_mul.c
@@ -4,7 +4,6 @@
/*
* MIPS floating point support
* Copyright (C) 1994-2000 Algorithmics Ltd.
- * http://www.algor.co.uk
*
* ########################################################################
*
diff --git a/arch/mips/math-emu/sp_scalb.c b/arch/mips/math-emu/sp_scalb.c
index 44ceb87..dd76196 100644
--- a/arch/mips/math-emu/sp_scalb.c
+++ b/arch/mips/math-emu/sp_scalb.c
@@ -4,7 +4,6 @@
/*
* MIPS floating point support
* Copyright (C) 1994-2000 Algorithmics Ltd.
- * http://www.algor.co.uk
*
* ########################################################################
*
diff --git a/arch/mips/math-emu/sp_simple.c b/arch/mips/math-emu/sp_simple.c
index 2fd53c9..ae4fcfa 100644
--- a/arch/mips/math-emu/sp_simple.c
+++ b/arch/mips/math-emu/sp_simple.c
@@ -4,7 +4,6 @@
/*
* MIPS floating point support
* Copyright (C) 1994-2000 Algorithmics Ltd.
- * http://www.algor.co.uk
*
* ########################################################################
*
diff --git a/arch/mips/math-emu/sp_sqrt.c b/arch/mips/math-emu/sp_sqrt.c
index 8a934b9..fed2017 100644
--- a/arch/mips/math-emu/sp_sqrt.c
+++ b/arch/mips/math-emu/sp_sqrt.c
@@ -4,7 +4,6 @@
/*
* MIPS floating point support
* Copyright (C) 1994-2000 Algorithmics Ltd.
- * http://www.algor.co.uk
*
* ########################################################################
*
diff --git a/arch/mips/math-emu/sp_sub.c b/arch/mips/math-emu/sp_sub.c
index dbb802c..886ed5b 100644
--- a/arch/mips/math-emu/sp_sub.c
+++ b/arch/mips/math-emu/sp_sub.c
@@ -4,7 +4,6 @@
/*
* MIPS floating point support
* Copyright (C) 1994-2000 Algorithmics Ltd.
- * http://www.algor.co.uk
*
* ########################################################################
*
diff --git a/arch/mips/math-emu/sp_tint.c b/arch/mips/math-emu/sp_tint.c
index 352dc3a..0fe9acc 100644
--- a/arch/mips/math-emu/sp_tint.c
+++ b/arch/mips/math-emu/sp_tint.c
@@ -4,7 +4,6 @@
/*
* MIPS floating point support
* Copyright (C) 1994-2000 Algorithmics Ltd.
- * http://www.algor.co.uk
*
* ########################################################################
*
diff --git a/arch/mips/math-emu/sp_tlong.c b/arch/mips/math-emu/sp_tlong.c
index 92cd9c5..d0ca6e2 100644
--- a/arch/mips/math-emu/sp_tlong.c
+++ b/arch/mips/math-emu/sp_tlong.c
@@ -4,7 +4,6 @@
/*
* MIPS floating point support
* Copyright (C) 1994-2000 Algorithmics Ltd.
- * http://www.algor.co.uk
*
* ########################################################################
*
diff --git a/arch/mips/pci/fixup-fuloong2e.c b/arch/mips/pci/fixup-fuloong2e.c
index 4f6d8da..d5d4c01 100644
--- a/arch/mips/pci/fixup-fuloong2e.c
+++ b/arch/mips/pci/fixup-fuloong2e.c
@@ -52,7 +52,7 @@
{
unsigned int val;
- /* Configues port 1, 2, 3, 4 to be validate*/
+ /* Configures port 1, 2, 3, 4 to be validate*/
pci_read_config_dword(pdev, 0xe0, &val);
pci_write_config_dword(pdev, 0xe0, (val & ~7) | 0x4);
diff --git a/arch/mips/sibyte/common/sb_tbprof.c b/arch/mips/sibyte/common/sb_tbprof.c
index ca35b73..87ccdb4 100644
--- a/arch/mips/sibyte/common/sb_tbprof.c
+++ b/arch/mips/sibyte/common/sb_tbprof.c
@@ -43,7 +43,7 @@
#include <asm/sibyte/sb1250_scd.h>
#include <asm/sibyte/sb1250_int.h>
#else
-#error invalid SiByte UART configuation
+#error invalid SiByte UART configuration
#endif
#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
diff --git a/arch/powerpc/include/asm/hydra.h b/arch/powerpc/include/asm/hydra.h
index 1ad4eed..5b0c98bd 100644
--- a/arch/powerpc/include/asm/hydra.h
+++ b/arch/powerpc/include/asm/hydra.h
@@ -10,7 +10,7 @@
*
* © Copyright 1995 Apple Computer, Inc. All rights reserved.
*
- * It's available online from http://chrp.apple.com/MacTech.pdf.
+ * It's available online from http://www.cpu.lu/~mlan/ftp/MacTech.pdf
* You can obtain paper copies of this book from computer bookstores or by
* writing Morgan Kaufmann Publishers, Inc., 340 Pine Street, Sixth Floor, San
* Francisco, CA 94104. Reference ISBN 1-55860-393-X.
diff --git a/arch/x86/kernel/apm_32.c b/arch/x86/kernel/apm_32.c
index fbbc4da..0e4f24c 100644
--- a/arch/x86/kernel/apm_32.c
+++ b/arch/x86/kernel/apm_32.c
@@ -189,8 +189,8 @@
* Intel Order Number 241704-001. Microsoft Part Number 781-110-X01.
*
* [This document is available free from Intel by calling 800.628.8686 (fax
- * 916.356.6100) or 800.548.4725; or via anonymous ftp from
- * ftp://ftp.intel.com/pub/IAL/software_specs/apmv11.doc. It is also
+ * 916.356.6100) or 800.548.4725; or from
+ * http://www.microsoft.com/whdc/archive/amp_12.mspx It is also
* available from Microsoft by calling 206.882.8080.]
*
* APM 1.2 Reference:
diff --git a/arch/x86/kernel/microcode_core.c b/arch/x86/kernel/microcode_core.c
index 0b3d37e..1cca374 100644
--- a/arch/x86/kernel/microcode_core.c
+++ b/arch/x86/kernel/microcode_core.c
@@ -12,7 +12,7 @@
* Software Developer's Manual
* Order Number 253668 or free download from:
*
- * http://developer.intel.com/design/pentium4/manuals/253668.htm
+ * http://developer.intel.com/Assets/PDF/manual/253668.pdf
*
* For more information, go to http://www.urbanmyth.org/microcode
*
diff --git a/arch/x86/kernel/microcode_intel.c b/arch/x86/kernel/microcode_intel.c
index 3561702..dcb65cc 100644
--- a/arch/x86/kernel/microcode_intel.c
+++ b/arch/x86/kernel/microcode_intel.c
@@ -12,7 +12,7 @@
* Software Developer's Manual
* Order Number 253668 or free download from:
*
- * http://developer.intel.com/design/pentium4/manuals/253668.htm
+ * http://developer.intel.com/Assets/PDF/manual/253668.pdf
*
* For more information, go to http://www.urbanmyth.org/microcode
*
diff --git a/arch/xtensa/include/asm/uaccess.h b/arch/xtensa/include/asm/uaccess.h
index b852842..5b0c18c 100644
--- a/arch/xtensa/include/asm/uaccess.h
+++ b/arch/xtensa/include/asm/uaccess.h
@@ -4,7 +4,7 @@
* User space memory access functions
*
* These routines provide basic accessing functions to the user memory
- * space for the kernel. This header file provides fuctions such as:
+ * space for the kernel. This header file provides functions such as:
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
diff --git a/block/blk-core.c b/block/blk-core.c
index 51efd83..881fe44 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -1669,7 +1669,7 @@
* the insertion using this generic function.
*
* This function should also be useful for request stacking drivers
- * in some cases below, so export this fuction.
+ * in some cases below, so export this function.
* Request stacking drivers like request-based dm may change the queue
* limits while requests are in the queue (e.g. dm's table swapping).
* Such request stacking drivers should check those requests agaist
diff --git a/drivers/ata/pata_bf54x.c b/drivers/ata/pata_bf54x.c
index ec2c777..7aed5c7 100644
--- a/drivers/ata/pata_bf54x.c
+++ b/drivers/ata/pata_bf54x.c
@@ -1588,7 +1588,7 @@
host->ports[0]->ioaddr.ctl_addr = (void *)res->start;
if (peripheral_request_list(atapi_io_port, "atapi-io-port")) {
- dev_err(&pdev->dev, "Requesting Peripherals faild\n");
+ dev_err(&pdev->dev, "Requesting Peripherals failed\n");
return -EFAULT;
}
diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c
index bf88f71..aa0e0c5 100644
--- a/drivers/ata/pata_it821x.c
+++ b/drivers/ata/pata_it821x.c
@@ -15,8 +15,8 @@
* May be copied or modified under the terms of the GNU General Public License
* Based in part on the ITE vendor provided SCSI driver.
*
- * Documentation available from
- * http://www.ite.com.tw/pc/IT8212F_V04.pdf
+ * Documentation available from IT8212F_V04.pdf
+ * http://www.ite.com.tw/EN/products_more.aspx?CategoryID=3&ID=5,91
* Some other documents are NDA.
*
* The ITE8212 isn't exactly a standard IDE controller. It has two
diff --git a/drivers/atm/Kconfig b/drivers/atm/Kconfig
index be7461c..31c6010 100644
--- a/drivers/atm/Kconfig
+++ b/drivers/atm/Kconfig
@@ -301,7 +301,7 @@
control memory (128K-1KVC, 512K-4KVC), the size of the packet
memory (128K, 512K, 1M), and the PHY type (Single/Multi mode OC3,
UTP155, UTP25, DS3 and E3). Go to:
- <http://www.iphase.com/products/ClassSheet.cfm?ClassID=ATM>
+ <http://www.iphase.com/>
for more info about the cards. Say Y (or M to compile as a module
named iphase) here if you have one of these cards.
diff --git a/drivers/base/core.c b/drivers/base/core.c
index 2cb49a9..6ed6454 100644
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -233,7 +233,7 @@
__func__, retval);
}
- /* have the device type specific fuction add its stuff */
+ /* have the device type specific function add its stuff */
if (dev->type && dev->type->uevent) {
retval = dev->type->uevent(dev, env);
if (retval)
diff --git a/drivers/char/agp/Kconfig b/drivers/char/agp/Kconfig
index 5ddf67e..fcd867d 100644
--- a/drivers/char/agp/Kconfig
+++ b/drivers/char/agp/Kconfig
@@ -34,7 +34,7 @@
X on the following ALi chipsets. The supported chipsets
include M1541, M1621, M1631, M1632, M1641,M1647,and M1651.
For the ALi-chipset question, ALi suggests you refer to
- <http://www.ali.com.tw/eng/support/index.shtml>.
+ <http://www.ali.com.tw/>.
The M1541 chipset can do AGP 1x and 2x, but note that there is an
acknowledged incompatibility with Matrox G200 cards. Due to
diff --git a/drivers/char/agp/i460-agp.c b/drivers/char/agp/i460-agp.c
index e763d33..75b763c 100644
--- a/drivers/char/agp/i460-agp.c
+++ b/drivers/char/agp/i460-agp.c
@@ -1,7 +1,7 @@
/*
* For documentation on the i460 AGP interface, see Chapter 7 (AGP Subsystem) of
* the "Intel 460GTX Chipset Software Developer's Manual":
- * http://developer.intel.com/design/itanium/downloads/24870401s.htm
+ * http://www.intel.com/design/archives/itanium/downloads/248704.htm
*/
/*
* 460GX support by Chris Ahna <christopher.j.ahna@intel.com>
diff --git a/drivers/char/apm-emulation.c b/drivers/char/apm-emulation.c
index 3022801..45b987c 100644
--- a/drivers/char/apm-emulation.c
+++ b/drivers/char/apm-emulation.c
@@ -7,8 +7,8 @@
* Intel Corporation, Microsoft Corporation. Advanced Power Management
* (APM) BIOS Interface Specification, Revision 1.2, February 1996.
*
- * [This document is available from Microsoft at:
- * http://www.microsoft.com/hwdev/busbios/amp_12.htm]
+ * This document is available from Microsoft at:
+ * http://www.microsoft.com/whdc/archive/amp_12.mspx
*/
#include <linux/module.h>
#include <linux/poll.h>
diff --git a/drivers/char/ipmi/ipmi_bt_sm.c b/drivers/char/ipmi/ipmi_bt_sm.c
index 7b98c06..3ed20e8 100644
--- a/drivers/char/ipmi/ipmi_bt_sm.c
+++ b/drivers/char/ipmi/ipmi_bt_sm.c
@@ -2,7 +2,7 @@
* ipmi_bt_sm.c
*
* The state machine for an Open IPMI BT sub-driver under ipmi_si.c, part
- * of the driver architecture at http://sourceforge.net/project/openipmi
+ * of the driver architecture at http://sourceforge.net/projects/openipmi
*
* Author: Rocky Craig <first.last@hp.com>
*
diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c
index 7bd7c45..e537610 100644
--- a/drivers/char/ipmi/ipmi_si_intf.c
+++ b/drivers/char/ipmi/ipmi_si_intf.c
@@ -1974,8 +1974,7 @@
/*
* Defined at
- * http://h21007.www2.hp.com/portal/download/files
- * /unprot/hpspmi.pdf
+ * http://h21007.www2.hp.com/portal/download/files/unprot/hpspmi.pdf
*/
struct SPMITable {
s8 Signature[4];
diff --git a/drivers/char/n_r3964.c b/drivers/char/n_r3964.c
index a98290d..88dda0c 100644
--- a/drivers/char/n_r3964.c
+++ b/drivers/char/n_r3964.c
@@ -4,7 +4,6 @@
* Copyright by
* Philips Automation Projects
* Kassel (Germany)
- * http://www.pap-philips.de
* -----------------------------------------------------------
* This software may be used and distributed according to the terms of
* the GNU General Public License, incorporated herein by reference.
diff --git a/drivers/char/pcmcia/Kconfig b/drivers/char/pcmcia/Kconfig
index ffa0efc..6614416 100644
--- a/drivers/char/pcmcia/Kconfig
+++ b/drivers/char/pcmcia/Kconfig
@@ -28,7 +28,7 @@
This kernel driver requires additional userspace support, either
by the vendor-provided PC/SC ifd_handler (http://www.omnikey.com/),
- or via the cm4000 backend of OpenCT (http://www.opensc.com/).
+ or via the cm4000 backend of OpenCT (http://www.opensc-project.org/opensc).
config CARDMAN_4040
tristate "Omnikey CardMan 4040 support"
@@ -41,7 +41,7 @@
in I/O space. To use the kernel driver, you will need either the
PC/SC ifdhandler provided from the Omnikey homepage
(http://www.omnikey.com/), or a current development version of OpenCT
- (http://www.opensc.org/).
+ (http://www.opensc-project.org/opensc).
config IPWIRELESS
tristate "IPWireless 3G UMTS PCMCIA card support"
diff --git a/drivers/char/pcmcia/cm4000_cs.c b/drivers/char/pcmcia/cm4000_cs.c
index 6835c23..d962f25 100644
--- a/drivers/char/pcmcia/cm4000_cs.c
+++ b/drivers/char/pcmcia/cm4000_cs.c
@@ -1666,7 +1666,7 @@
/* opening will always block since the
* monitor will be started by open, which
* means we have to wait for ATR becoming
- * vaild = block until valid (or card
+ * valid = block until valid (or card
* inserted)
*/
if (filp->f_flags & O_NONBLOCK) {
diff --git a/drivers/char/stallion.c b/drivers/char/stallion.c
index 8ef1649..4bef6ab 100644
--- a/drivers/char/stallion.c
+++ b/drivers/char/stallion.c
@@ -3181,7 +3181,7 @@
/*
* Return the current state of data flow on this port. This is only
- * really interresting when determining if data has fully completed
+ * really interesting when determining if data has fully completed
* transmission or not... This is easy for the cd1400, it accurately
* maintains the busy port flag.
*/
@@ -4131,7 +4131,7 @@
/*
* Return the current state of data flow on this port. This is only
- * really interresting when determining if data has fully completed
+ * really interesting when determining if data has fully completed
* transmission or not... The sc26198 interrupt scheme cannot
* determine when all data has actually drained, so we need to
* check the port statusy register to be sure.
diff --git a/drivers/char/tpm/Kconfig b/drivers/char/tpm/Kconfig
index 4dc338f..f6595ab 100644
--- a/drivers/char/tpm/Kconfig
+++ b/drivers/char/tpm/Kconfig
@@ -58,6 +58,6 @@
To compile this driver as a module, choose M here; the module
will be called tpm_infineon.
Further information on this driver and the supported hardware
- can be found at http://www.prosec.rub.de/tpm
+ can be found at http://www.trust.rub.de/projects/linux-device-driver-infineon-tpm/
endif # TCG_TPM
diff --git a/drivers/char/tpm/tpm_infineon.c b/drivers/char/tpm/tpm_infineon.c
index f584407..76da32e 100644
--- a/drivers/char/tpm/tpm_infineon.c
+++ b/drivers/char/tpm/tpm_infineon.c
@@ -7,7 +7,7 @@
* Copyright (C) 2005, Marcel Selhorst <m.selhorst@sirrix.com>
* Sirrix AG - security technologies, http://www.sirrix.com and
* Applied Data Security Group, Ruhr-University Bochum, Germany
- * Project-Homepage: http://www.prosec.rub.de/tpm
+ * Project-Homepage: http://www.trust.rub.de/projects/linux-device-driver-infineon-tpm/
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
diff --git a/drivers/edac/edac_device_sysfs.c b/drivers/edac/edac_device_sysfs.c
index 2941dca..400de07 100644
--- a/drivers/edac/edac_device_sysfs.c
+++ b/drivers/edac/edac_device_sysfs.c
@@ -1,7 +1,7 @@
/*
* file for managing the edac_device class of devices for EDAC
*
- * (C) 2007 SoftwareBitMaker (http://www.softwarebitmaker.com)
+ * (C) 2007 SoftwareBitMaker
*
* This file may be distributed under the terms of the
* GNU General Public License.
diff --git a/drivers/edac/i82443bxgx_edac.c b/drivers/edac/i82443bxgx_edac.c
index a2fa1fe..678405a 100644
--- a/drivers/edac/i82443bxgx_edac.c
+++ b/drivers/edac/i82443bxgx_edac.c
@@ -12,7 +12,7 @@
* 440GX fix by Jason Uhlenkott <juhlenko@akamai.com>.
*
* Written with reference to 82443BX Host Bridge Datasheet:
- * http://www.intel.com/design/chipsets/440/documentation.htm
+ * http://download.intel.com/design/chipsets/datashts/29063301.pdf
* references to this document given in [].
*
* This module doesn't support the 440LX, but it may be possible to
diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig
index 88a3ae6..e8b6a13 100644
--- a/drivers/firmware/Kconfig
+++ b/drivers/firmware/Kconfig
@@ -74,7 +74,8 @@
You must also enable the appropriate drivers (serial, VGA, etc.)
- See <http://www.dig64.org/specifications/DIG64_HCDPv20_042804.pdf>
+ See DIG64_HCDPv20_042804.pdf available from
+ <http://www.dig64.org/specifications/>
config DELL_RBU
tristate "BIOS update support for DELL systems via sysfs"
diff --git a/drivers/firmware/edd.c b/drivers/firmware/edd.c
index f287fe7..96c25d9 100644
--- a/drivers/firmware/edd.c
+++ b/drivers/firmware/edd.c
@@ -15,7 +15,7 @@
* made in setup.S, copied to safe structures in setup.c,
* and presents it in sysfs.
*
- * Please see http://linux.dell.com/edd30/results.html for
+ * Please see http://linux.dell.com/edd/results.html for
* the list of BIOSs which have been reported to implement EDD.
*
* This program is free software; you can redistribute it and/or modify
diff --git a/drivers/firmware/pcdp.h b/drivers/firmware/pcdp.h
index ce910d6..e553060 100644
--- a/drivers/firmware/pcdp.h
+++ b/drivers/firmware/pcdp.h
@@ -1,8 +1,8 @@
/*
* Definitions for PCDP-defined console devices
*
- * v1.0a: http://www.dig64.org/specifications/DIG64_HCDPv10a_01.pdf
- * v2.0: http://www.dig64.org/specifications/DIG64_PCDPv20.pdf
+ * For DIG64_HCDPv10a_01.pdf and DIG64_PCDPv20.pdf (v1.0a and v2.0 resp.),
+ * please see <http://www.dig64.org/specifications/>
*
* (c) Copyright 2002, 2004 Hewlett-Packard Development Company, L.P.
* Khalid Aziz <khalid.aziz@hp.com>
diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index 949326d..58e65f9 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -76,7 +76,7 @@
* according to the hdisplay, vdisplay, vrefresh.
* It is based from the VESA(TM) Coordinated Video Timing Generator by
* Graham Loveridge April 9, 2003 available at
- * http://www.vesa.org/public/CVT/CVTd6r1.xls
+ * http://www.elo.utfsm.cl/~elo212/docs/CVTd6r1.xls
*
* And it is copied from xf86CVTmode in xserver/hw/xfree86/modes/xf86cvt.c.
* What I have done is to translate it by using integer calculation.
diff --git a/drivers/gpu/drm/radeon/radeon_cs.c b/drivers/gpu/drm/radeon/radeon_cs.c
index fcc79b5..6d64a27 100644
--- a/drivers/gpu/drm/radeon/radeon_cs.c
+++ b/drivers/gpu/drm/radeon/radeon_cs.c
@@ -268,7 +268,7 @@
}
r = radeon_ib_schedule(rdev, parser.ib);
if (r) {
- DRM_ERROR("Faild to schedule IB !\n");
+ DRM_ERROR("Failed to schedule IB !\n");
}
radeon_cs_parser_fini(&parser, r);
mutex_unlock(&rdev->cs_mutex);
diff --git a/drivers/gpu/drm/radeon/radeon_ttm.c b/drivers/gpu/drm/radeon/radeon_ttm.c
index 84c53e4..a823d8f 100644
--- a/drivers/gpu/drm/radeon/radeon_ttm.c
+++ b/drivers/gpu/drm/radeon/radeon_ttm.c
@@ -631,7 +631,7 @@
return drm_mmap(filp, vma);
}
- file_priv = (struct drm_file *)filp->private_data;
+ file_priv = filp->private_data;
rdev = file_priv->minor->dev->dev_private;
if (rdev == NULL) {
return -EINVAL;
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c b/drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c
index 0fe3176..635c0ff 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c
@@ -545,7 +545,7 @@
struct drm_file *file_priv;
struct vmw_private *dev_priv;
- file_priv = (struct drm_file *)filp->private_data;
+ file_priv = filp->private_data;
dev_priv = vmw_priv(file_priv->minor->dev);
if (vma->vm_pgoff != (dev_priv->mmio_start >> PAGE_SHIFT) ||
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_ttm_glue.c b/drivers/gpu/drm/vmwgfx/vmwgfx_ttm_glue.c
index 8312328..1e8eedd 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_ttm_glue.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_ttm_glue.c
@@ -39,7 +39,7 @@
return drm_mmap(filp, vma);
}
- file_priv = (struct drm_file *)filp->private_data;
+ file_priv = filp->private_data;
dev_priv = vmw_priv(file_priv->minor->dev);
return ttm_bo_mmap(filp, vma, &dev_priv->bdev);
}
diff --git a/drivers/hwmon/adm1025.c b/drivers/hwmon/adm1025.c
index 251b631..60befc0 100644
--- a/drivers/hwmon/adm1025.c
+++ b/drivers/hwmon/adm1025.c
@@ -12,7 +12,7 @@
* resolution of about 0.5% of the nominal value). Temperature values are
* reported with a 1 deg resolution and a 3 deg accuracy. Complete
* datasheet can be obtained from Analog's website at:
- * http://www.analog.com/Analog_Root/productPage/productHome/0,2121,ADM1025,00.html
+ * http://www.onsemi.com/PowerSolutions/product.do?id=ADM1025
*
* This driver also supports the ADM1025A, which differs from the ADM1025
* only in that it has "open-drain VID inputs while the ADM1025 has
diff --git a/drivers/hwmon/adm1026.c b/drivers/hwmon/adm1026.c
index 65335b2..4bf969c 100644
--- a/drivers/hwmon/adm1026.c
+++ b/drivers/hwmon/adm1026.c
@@ -6,7 +6,7 @@
Chip details at:
- <http://www.analog.com/UploadedFiles/Data_Sheets/779263102ADM1026_a.pdf>
+ <http://www.onsemi.com/PowerSolutions/product.do?id=ADM1026>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
diff --git a/drivers/hwmon/f75375s.c b/drivers/hwmon/f75375s.c
index 9638d58..95cbfb3 100644
--- a/drivers/hwmon/f75375s.c
+++ b/drivers/hwmon/f75375s.c
@@ -6,10 +6,10 @@
* Datasheets available at:
*
* f75375:
- * http://www.fintek.com.tw/files/productfiles/2005111152950.pdf
+ * http://www.fintek.com.tw/files/productfiles/F75375_V026P.pdf
*
* f75373:
- * http://www.fintek.com.tw/files/productfiles/2005111153128.pdf
+ * http://www.fintek.com.tw/files/productfiles/F75373_V025P.pdf
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/drivers/hwmon/g760a.c b/drivers/hwmon/g760a.c
index 1f63d1a..1d6a6fa 100644
--- a/drivers/hwmon/g760a.c
+++ b/drivers/hwmon/g760a.c
@@ -5,7 +5,7 @@
Copyright (C) 2007 Herbert Valerio Riedel <hvr@gnu.org>
Complete datasheet is available at GMT's website:
- http://www.gmt.com.tw/datasheet/g760a.pdf
+ http://www.gmt.com.tw/product/datasheet/EDS-760A.pdf
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
diff --git a/drivers/hwmon/hwmon-vid.c b/drivers/hwmon/hwmon-vid.c
index bf0862a8..2b2ca16 100644
--- a/drivers/hwmon/hwmon-vid.c
+++ b/drivers/hwmon/hwmon-vid.c
@@ -38,7 +38,7 @@
* available at http://developer.intel.com/.
*
* AMD Athlon 64 and AMD Opteron Processors, AMD Publication 26094,
- * http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/26094.PDF
+ * http://support.amd.com/us/Processor_TechDocs/26094.PDF
* Table 74. VID Code Voltages
* This corresponds to an arbitrary VRM code of 24 in the functions below.
* These CPU models (K8 revision <= E) have 5 VID pins. See also:
diff --git a/drivers/ide/hpt366.c b/drivers/ide/hpt366.c
index 4516369..97d98fb 100644
--- a/drivers/ide/hpt366.c
+++ b/drivers/ide/hpt366.c
@@ -12,7 +12,7 @@
*
*
* HighPoint has its own drivers (open source except for the RAID part)
- * available from http://www.highpoint-tech.com/BIOS%20+%20Driver/.
+ * available from http://www.highpoint-tech.com/USA_new/service_support.htm
* This may be useful to anyone wanting to work on this driver, however do not
* trust them too much since the code tends to become less and less meaningful
* as the time passes... :-/
diff --git a/drivers/ide/ht6560b.c b/drivers/ide/ht6560b.c
index d81e496..808bcdc 100644
--- a/drivers/ide/ht6560b.c
+++ b/drivers/ide/ht6560b.c
@@ -10,7 +10,6 @@
* Author: Mikko Ala-Fossi <maf@iki.fi>
* Jan Evert van Grootheest <j.e.van.grootheest@caiway.nl>
*
- * Try: http://www.maf.iki.fi/~maf/ht6560b/
*/
#define DRV_NAME "ht6560b"
diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c
index 7c5b01c..2747980 100644
--- a/drivers/ide/ide-disk.c
+++ b/drivers/ide/ide-disk.c
@@ -435,12 +435,11 @@
if (!(rq->cmd_flags & REQ_FLUSH))
return BLKPREP_OK;
- cmd = kmalloc(sizeof(*cmd), GFP_ATOMIC);
+ cmd = kzalloc(sizeof(*cmd), GFP_ATOMIC);
/* FIXME: map struct ide_taskfile on rq->cmd[] */
BUG_ON(cmd == NULL);
- memset(cmd, 0, sizeof(*cmd));
if (ata_id_flush_ext_enabled(drive->id) &&
(drive->capacity64 >= (1UL << 28)))
cmd->tf.command = ATA_CMD_FLUSH_EXT;
diff --git a/drivers/infiniband/Kconfig b/drivers/infiniband/Kconfig
index 89d70de..6e35ecc 100644
--- a/drivers/infiniband/Kconfig
+++ b/drivers/infiniband/Kconfig
@@ -16,7 +16,7 @@
Userspace InfiniBand Management Datagram (MAD) support. This
is the kernel side of the userspace MAD support, which allows
userspace processes to send and receive MADs. You will also
- need libibumad from <http://www.openib.org>.
+ need libibumad from <http://www.openfabrics.org/downloads/management/>.
config INFINIBAND_USER_ACCESS
tristate "InfiniBand userspace access (verbs and CM)"
@@ -28,7 +28,7 @@
to set up connections and directly access InfiniBand
hardware for fast-path operations. You will also need
libibverbs, libibcm and a hardware driver library from
- <http://www.openib.org>.
+ <http://www.openfabrics.org/git/>.
config INFINIBAND_USER_MEM
bool
diff --git a/drivers/infiniband/hw/cxgb3/Kconfig b/drivers/infiniband/hw/cxgb3/Kconfig
index 2acec3f..2b6352b 100644
--- a/drivers/infiniband/hw/cxgb3/Kconfig
+++ b/drivers/infiniband/hw/cxgb3/Kconfig
@@ -10,7 +10,7 @@
our website at <http://www.chelsio.com>.
For customer support, please visit our customer support page at
- <http://www.chelsio.com/support.htm>.
+ <http://www.chelsio.com/support.html>.
Please send feedback to <linux-bugs@chelsio.com>.
diff --git a/drivers/infiniband/hw/cxgb4/Kconfig b/drivers/infiniband/hw/cxgb4/Kconfig
index ccb85ea..6b7e6c5 100644
--- a/drivers/infiniband/hw/cxgb4/Kconfig
+++ b/drivers/infiniband/hw/cxgb4/Kconfig
@@ -10,7 +10,7 @@
our website at <http://www.chelsio.com>.
For customer support, please visit our customer support page at
- <http://www.chelsio.com/support.htm>.
+ <http://www.chelsio.com/support.html>.
Please send feedback to <linux-bugs@chelsio.com>.
diff --git a/drivers/infiniband/hw/qib/qib_file_ops.c b/drivers/infiniband/hw/qib/qib_file_ops.c
index aa2be21..79d9971 100644
--- a/drivers/infiniband/hw/qib/qib_file_ops.c
+++ b/drivers/infiniband/hw/qib/qib_file_ops.c
@@ -1723,7 +1723,7 @@
mutex_lock(&qib_mutex);
- fd = (struct qib_filedata *) fp->private_data;
+ fd = fp->private_data;
fp->private_data = NULL;
rcd = fd->rcd;
if (!rcd) {
@@ -1809,7 +1809,7 @@
struct qib_ctxtdata *rcd = ctxt_fp(fp);
struct qib_filedata *fd;
- fd = (struct qib_filedata *) fp->private_data;
+ fd = fp->private_data;
info.num_active = qib_count_active_units();
info.unit = rcd->dd->unit;
diff --git a/drivers/infiniband/ulp/iser/Kconfig b/drivers/infiniband/ulp/iser/Kconfig
index b411c51..d00af71 100644
--- a/drivers/infiniband/ulp/iser/Kconfig
+++ b/drivers/infiniband/ulp/iser/Kconfig
@@ -9,4 +9,4 @@
The iSER protocol is defined by IETF.
See <http://www.ietf.org/rfc/rfc5046.txt>
- and <http://www.infinibandta.org/members/spec/Annex_iSER.PDF>
+ and <http://members.infinibandta.org/kwspub/spec/Annex_iSER.PDF>
diff --git a/drivers/input/joystick/gamecon.c b/drivers/input/joystick/gamecon.c
index 0ffaf2c..e68e497 100644
--- a/drivers/input/joystick/gamecon.c
+++ b/drivers/input/joystick/gamecon.c
@@ -521,9 +521,8 @@
* PSX support
*
* See documentation at:
- * http://www.dim.com/~mackys/psxmemcard/ps-eng2.txt
+ * http://www.geocities.co.jp/Playtown/2004/psx/ps_eng.txt
* http://www.gamesx.com/controldata/psxcont/psxcont.htm
- * ftp://milano.usal.es/pablo/
*
*/
diff --git a/drivers/input/misc/cm109.c b/drivers/input/misc/cm109.c
index 2b0eba6..b09c7d1 100644
--- a/drivers/input/misc/cm109.c
+++ b/drivers/input/misc/cm109.c
@@ -259,7 +259,7 @@
/*
* Keymap for ATCom AU-100
- * http://www.atcom.cn/En_products_AU100.html
+ * http://www.atcom.cn/products.html
* http://www.packetizer.com/products/au100/
* http://www.voip-info.org/wiki/view/AU-100
*
diff --git a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig
index c714ca2..bf5fd7f 100644
--- a/drivers/input/mouse/Kconfig
+++ b/drivers/input/mouse/Kconfig
@@ -30,6 +30,7 @@
<http://w1.894.telia.com/~u89404340/touchpad/index.html>
and a new version of GPM at:
<http://www.geocities.com/dt_or/gpm/gpm.html>
+ <http://xorg.freedesktop.org/archive/individual/driver/>
to take advantage of the advanced features of the touchpad.
If unsure, say Y.
diff --git a/drivers/input/mouse/touchkit_ps2.c b/drivers/input/mouse/touchkit_ps2.c
index 88121c5..1fd8f5e 100644
--- a/drivers/input/mouse/touchkit_ps2.c
+++ b/drivers/input/mouse/touchkit_ps2.c
@@ -21,8 +21,8 @@
*
* Based upon touchkitusb.c
*
- * Vendor documentation is available in support section of:
- * http://www.egalax.com.tw/
+ * Vendor documentation is available at:
+ * http://home.eeti.com.tw/web20/drivers/Software%20Programming%20Guide_v2.0.pdf
*/
#include <linux/kernel.h>
diff --git a/drivers/input/touchscreen/mk712.c b/drivers/input/touchscreen/mk712.c
index efd3aeb..36e57de 100644
--- a/drivers/input/touchscreen/mk712.c
+++ b/drivers/input/touchscreen/mk712.c
@@ -17,7 +17,7 @@
* found in Gateway AOL Connected Touchpad computers.
*
* Documentation for ICS MK712 can be found at:
- * http://www.icst.com/pdf/mk712.pdf
+ * http://www.idt.com/products/getDoc.cfm?docID=18713923
*/
/*
diff --git a/drivers/isdn/i4l/isdn_audio.c b/drivers/isdn/i4l/isdn_audio.c
index 861bdf3..d501393 100644
--- a/drivers/isdn/i4l/isdn_audio.c
+++ b/drivers/isdn/i4l/isdn_audio.c
@@ -439,7 +439,7 @@
/*
* Goertzel algorithm.
- * See http://ptolemy.eecs.berkeley.edu/~pino/Ptolemy/papers/96/dtmf_ict/
+ * See http://ptolemy.eecs.berkeley.edu/papers/96/dtmf_ict/
* for more info.
* Result is stored into an sk_buff and queued up for later
* evaluation.
diff --git a/drivers/macintosh/therm_adt746x.c b/drivers/macintosh/therm_adt746x.c
index d0d2213..9e3e2c5 100644
--- a/drivers/macintosh/therm_adt746x.c
+++ b/drivers/macintosh/therm_adt746x.c
@@ -3,9 +3,9 @@
*
* Copyright (C) 2003, 2004 Colin Leroy, Rasmus Rohde, Benjamin Herrenschmidt
*
- * Documentation from
- * http://www.analog.com/UploadedFiles/Data_Sheets/115254175ADT7467_pra.pdf
- * http://www.analog.com/UploadedFiles/Data_Sheets/3686221171167ADT7460_b.pdf
+ * Documentation from 115254175ADT7467_pra.pdf and 3686221171167ADT7460_b.pdf
+ * http://www.onsemi.com/PowerSolutions/product.do?id=ADT7467
+ * http://www.onsemi.com/PowerSolutions/product.do?id=ADT7460
*
*/
diff --git a/drivers/media/IR/keymaps/rc-manli.c b/drivers/media/IR/keymaps/rc-manli.c
index 1e9fbfa..0f590b3 100644
--- a/drivers/media/IR/keymaps/rc-manli.c
+++ b/drivers/media/IR/keymaps/rc-manli.c
@@ -13,7 +13,6 @@
#include <media/rc-map.h>
/* Michael Tokarev <mjt@tls.msk.ru>
- http://www.corpit.ru/mjt/beholdTV/remote_control.jpg
keytable is used by MANLI MTV00[0x0c] and BeholdTV 40[13] at
least, and probably other cards too.
The "ascii-art picture" below (in comments, first row
diff --git a/drivers/media/dvb/ttpci/av7110.c b/drivers/media/dvb/ttpci/av7110.c
index 893fbc5..a12b88f 100644
--- a/drivers/media/dvb/ttpci/av7110.c
+++ b/drivers/media/dvb/ttpci/av7110.c
@@ -26,7 +26,7 @@
* Or, point your browser to http://www.gnu.org/copyleft/gpl.html
*
*
- * the project's page is at http://www.linuxtv.org/dvb/
+ * the project's page is at http://www.linuxtv.org/
*/
@@ -2291,12 +2291,7 @@
/* Budgetpatch note:
* Original hardware design by Roberto Deza:
* There is a DVB_Wiki at
- * http://212.227.36.83/linuxtv/wiki/index.php/Main_Page
- * where is described this 'DVB TT Budget Patch', on Card Modding:
- * http://212.227.36.83/linuxtv/wiki/index.php/DVB_TT_Budget_Patch
- * On the short description there is also a link to a external file,
- * with more details:
- * http://perso.wanadoo.es/jesussolano/Ttf_tsc1.zip
+ * http://www.linuxtv.org/
*
* New software triggering design by Emard that works on
* original Roberto Deza's hardware:
diff --git a/drivers/media/dvb/ttpci/av7110_av.c b/drivers/media/dvb/ttpci/av7110_av.c
index 6ef3996..244d5d5 100644
--- a/drivers/media/dvb/ttpci/av7110_av.c
+++ b/drivers/media/dvb/ttpci/av7110_av.c
@@ -25,7 +25,7 @@
* Or, point your browser to http://www.gnu.org/copyleft/gpl.html
*
*
- * the project's page is at http://www.linuxtv.org/dvb/
+ * the project's page is at http://www.linuxtv.org/
*/
#include <linux/types.h>
diff --git a/drivers/media/dvb/ttpci/av7110_ca.c b/drivers/media/dvb/ttpci/av7110_ca.c
index 43f61f2..122c728 100644
--- a/drivers/media/dvb/ttpci/av7110_ca.c
+++ b/drivers/media/dvb/ttpci/av7110_ca.c
@@ -25,7 +25,7 @@
* Or, point your browser to http://www.gnu.org/copyleft/gpl.html
*
*
- * the project's page is at http://www.linuxtv.org/dvb/
+ * the project's page is at http://www.linuxtv.org/
*/
#include <linux/kernel.h>
diff --git a/drivers/media/dvb/ttpci/av7110_hw.c b/drivers/media/dvb/ttpci/av7110_hw.c
index e162691..f1cbfe5 100644
--- a/drivers/media/dvb/ttpci/av7110_hw.c
+++ b/drivers/media/dvb/ttpci/av7110_hw.c
@@ -22,7 +22,7 @@
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
* Or, point your browser to http://www.gnu.org/copyleft/gpl.html
*
- * the project's page is at http://www.linuxtv.org/dvb/
+ * the project's page is at http://www.linuxtv.org/
*/
/* for debugging ARM communication: */
diff --git a/drivers/media/dvb/ttpci/av7110_v4l.c b/drivers/media/dvb/ttpci/av7110_v4l.c
index 8986d96..ac20c5b 100644
--- a/drivers/media/dvb/ttpci/av7110_v4l.c
+++ b/drivers/media/dvb/ttpci/av7110_v4l.c
@@ -22,7 +22,7 @@
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
* Or, point your browser to http://www.gnu.org/copyleft/gpl.html
*
- * the project's page is at http://www.linuxtv.org/dvb/
+ * the project's page is at http://www.linuxtv.org/
*/
#include <linux/kernel.h>
diff --git a/drivers/media/dvb/ttpci/budget-av.c b/drivers/media/dvb/ttpci/budget-av.c
index 983672a..97afc01 100644
--- a/drivers/media/dvb/ttpci/budget-av.c
+++ b/drivers/media/dvb/ttpci/budget-av.c
@@ -30,7 +30,7 @@
* Or, point your browser to http://www.gnu.org/copyleft/gpl.html
*
*
- * the project's page is at http://www.linuxtv.org/dvb/
+ * the project's page is at http://www.linuxtv.org/
*/
#include "budget.h"
diff --git a/drivers/media/dvb/ttpci/budget-ci.c b/drivers/media/dvb/ttpci/budget-ci.c
index 13ac9e3..a9c2c32 100644
--- a/drivers/media/dvb/ttpci/budget-ci.c
+++ b/drivers/media/dvb/ttpci/budget-ci.c
@@ -26,7 +26,7 @@
* Or, point your browser to http://www.gnu.org/copyleft/gpl.html
*
*
- * the project's page is at http://www.linuxtv.org/dvb/
+ * the project's page is at http://www.linuxtv.org/
*/
#include <linux/module.h>
diff --git a/drivers/media/dvb/ttpci/budget-core.c b/drivers/media/dvb/ttpci/budget-core.c
index ba18e56..0546613 100644
--- a/drivers/media/dvb/ttpci/budget-core.c
+++ b/drivers/media/dvb/ttpci/budget-core.c
@@ -31,7 +31,7 @@
* Or, point your browser to http://www.gnu.org/copyleft/gpl.html
*
*
- * the project's page is at http://www.linuxtv.org/dvb/
+ * the project's page is at http://www.linuxtv.org/
*/
diff --git a/drivers/media/dvb/ttpci/budget-patch.c b/drivers/media/dvb/ttpci/budget-patch.c
index 9c92f9d..5798355 100644
--- a/drivers/media/dvb/ttpci/budget-patch.c
+++ b/drivers/media/dvb/ttpci/budget-patch.c
@@ -27,7 +27,7 @@
* Or, point your browser to http://www.gnu.org/copyleft/gpl.html
*
*
- * the project's page is at http://www.linuxtv.org/dvb/
+ * the project's page is at http://www.linuxtv.org/
*/
#include "av7110.h"
diff --git a/drivers/media/dvb/ttpci/budget.c b/drivers/media/dvb/ttpci/budget.c
index 874a10a..d238fb9 100644
--- a/drivers/media/dvb/ttpci/budget.c
+++ b/drivers/media/dvb/ttpci/budget.c
@@ -31,7 +31,7 @@
* Or, point your browser to http://www.gnu.org/copyleft/gpl.html
*
*
- * the project's page is at http://www.linuxtv.org/dvb/
+ * the project's page is at http://www.linuxtv.org/
*/
#include "budget.h"
diff --git a/drivers/media/radio/radio-maxiradio.c b/drivers/media/radio/radio-maxiradio.c
index 4349213..255d40d 100644
--- a/drivers/media/radio/radio-maxiradio.c
+++ b/drivers/media/radio/radio-maxiradio.c
@@ -13,7 +13,7 @@
* anybody does please mail me.
*
* For the pdf file see:
- * http://www.semiconductors.philips.com/pip/TEA5757H/V1
+ * http://www.nxp.com/acrobat_download2/expired_datasheets/TEA5757_5759_3.pdf
*
*
* CHANGES:
diff --git a/drivers/media/radio/radio-typhoon.c b/drivers/media/radio/radio-typhoon.c
index 0343928..b1f6305 100644
--- a/drivers/media/radio/radio-typhoon.c
+++ b/drivers/media/radio/radio-typhoon.c
@@ -1,9 +1,6 @@
/* Typhoon Radio Card driver for radio support
* (c) 1999 Dr. Henrik Seidel <Henrik.Seidel@gmx.de>
*
- * Card manufacturer:
- * http://194.18.155.92/idc/prod2.idc?nr=50753&lang=e
- *
* Notes on the hardware
*
* This card has two output sockets, one for speakers and one for line.
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index f6e4d04..d000522 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -978,7 +978,7 @@
Supported devices are typically found in some Asus laptops,
with USB id 174f:a311 and 05e1:0501. Other Syntek cameras
may be supported by the stk11xx driver, from which this is
- derived, see http://stk11xx.sourceforge.net
+ derived, see <http://sourceforge.net/projects/syntekdriver/>
To compile this driver as a module, choose M here: the
module will be called stkwebcam.
diff --git a/drivers/media/video/cafe_ccic.c b/drivers/media/video/cafe_ccic.c
index be35e69..9536f1a 100644
--- a/drivers/media/video/cafe_ccic.c
+++ b/drivers/media/video/cafe_ccic.c
@@ -4,7 +4,7 @@
* sensor.
*
* The data sheet for this device can be found at:
- * http://www.marvell.com/products/pcconn/88ALP01.jsp
+ * http://www.marvell.com/products/pc_connectivity/88alp01/
*
* Copyright 2006 One Laptop Per Child Association, Inc.
* Copyright 2006-7 Jonathan Corbet <corbet@lwn.net>
diff --git a/drivers/media/video/cx18/cx18-cards.c b/drivers/media/video/cx18/cx18-cards.c
index 6b805af..fe10909 100644
--- a/drivers/media/video/cx18/cx18-cards.c
+++ b/drivers/media/video/cx18/cx18-cards.c
@@ -39,7 +39,7 @@
.tv = { 0x61, 0x60, I2C_CLIENT_END },
};
-/* Please add new PCI IDs to: http://pci-ids.ucw.cz/iii
+/* Please add new PCI IDs to: http://pci-ids.ucw.cz/
This keeps the PCI ID database up to date. Note that the entries
must be added under vendor 0x4444 (Conexant) as subsystem IDs.
New vendor IDs should still be added to the vendor ID list. */
diff --git a/drivers/media/video/cx23885/cx23885-417.c b/drivers/media/video/cx23885/cx23885-417.c
index abd64e8..53a6782 100644
--- a/drivers/media/video/cx23885/cx23885-417.c
+++ b/drivers/media/video/cx23885/cx23885-417.c
@@ -7,7 +7,7 @@
* (c) 2008 Steven Toth <stoth@linuxtv.org>
* - CX23885/7/8 support
*
- * Includes parts from the ivtv driver( http://ivtv.sourceforge.net/),
+ * Includes parts from the ivtv driver <http://sourceforge.net/projects/ivtv/>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/cx88/cx88-blackbird.c b/drivers/media/video/cx88/cx88-blackbird.c
index e46e1ce..660b2a9 100644
--- a/drivers/media/video/cx88/cx88-blackbird.c
+++ b/drivers/media/video/cx88/cx88-blackbird.c
@@ -9,7 +9,7 @@
* (c) 2005-2006 Mauro Carvalho Chehab <mchehab@infradead.org>
* - video_ioctl2 conversion
*
- * Includes parts from the ivtv driver( http://ivtv.sourceforge.net/),
+ * Includes parts from the ivtv driver <http://sourceforge.net/projects/ivtv/>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/ivtv/ivtv-cards.c b/drivers/media/video/ivtv/ivtv-cards.c
index ca1fd32..87afbbe 100644
--- a/drivers/media/video/ivtv/ivtv-cards.c
+++ b/drivers/media/video/ivtv/ivtv-cards.c
@@ -65,7 +65,7 @@
/********************** card configuration *******************************/
-/* Please add new PCI IDs to: http://pci-ids.ucw.cz/iii
+/* Please add new PCI IDs to: http://pci-ids.ucw.cz/
This keeps the PCI ID database up to date. Note that the entries
must be added under vendor 0x4444 (Conexant) as subsystem IDs.
New vendor IDs should still be added to the vendor ID list. */
diff --git a/drivers/media/video/mxb.c b/drivers/media/video/mxb.c
index ef0c817..b1dbcf1 100644
--- a/drivers/media/video/mxb.c
+++ b/drivers/media/video/mxb.c
@@ -3,7 +3,7 @@
Copyright (C) 1998-2006 Michael Hunold <michael@mihu.de>
- Visit http://www.mihu.de/linux/saa7146/mxb/
+ Visit http://www.themm.net/~mihu/linux/saa7146/mxb.html
for further details about this card.
This program is free software; you can redistribute it and/or modify
diff --git a/drivers/media/video/sn9c102/sn9c102_pas202bcb.c b/drivers/media/video/sn9c102/sn9c102_pas202bcb.c
index 2782f94..2e86fdc 100644
--- a/drivers/media/video/sn9c102/sn9c102_pas202bcb.c
+++ b/drivers/media/video/sn9c102/sn9c102_pas202bcb.c
@@ -4,7 +4,6 @@
* *
* Copyright (C) 2004 by Carlos Eduardo Medaglia Dyonisio *
* <medaglia@undl.org.br> *
- * http://cadu.homelinux.com:8080/ *
* *
* Support for SN9C103, DAC Magnitude, exposure and green gain controls *
* added by Luca Risolia <luca.risolia@studio.unibo.it> *
diff --git a/drivers/media/video/zoran/videocodec.h b/drivers/media/video/zoran/videocodec.h
index 5c27b25..b654bff 100644
--- a/drivers/media/video/zoran/videocodec.h
+++ b/drivers/media/video/zoran/videocodec.h
@@ -56,7 +56,7 @@
the slave is bound to it). Otherwise it doesn't need this functions and
therfor they may not be initialized.
- The other fuctions are just for convenience, as they are for sure used by
+ The other functions are just for convenience, as they are for sure used by
most/all of the codecs. The last ones may be ommited, too.
See the structure declaration below for more information and which data has
diff --git a/drivers/media/video/zoran/zoran_driver.c b/drivers/media/video/zoran/zoran_driver.c
index 6f89d0a..3c471a4 100644
--- a/drivers/media/video/zoran/zoran_driver.c
+++ b/drivers/media/video/zoran/zoran_driver.c
@@ -1177,7 +1177,7 @@
if (height > BUZ_MAX_HEIGHT)
height = BUZ_MAX_HEIGHT;
- /* Check for vaild parameters */
+ /* Check for invalid parameters */
if (width < BUZ_MIN_WIDTH || height < BUZ_MIN_HEIGHT ||
width > BUZ_MAX_WIDTH || height > BUZ_MAX_HEIGHT) {
dprintk(1,
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index db2fbe2..1f69743 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -112,8 +112,8 @@
WARNING: This software may not be supported or function
correctly on your IBM server. Please consult the IBM ServerProven
- website <http://www.pc.ibm.com/ww/eserver/xseries/serverproven> for
- information on the specific driver level and support statement
+ website <http://www-03.ibm.com/systems/info/x86servers/serverproven/compat/us/>
+ for information on the specific driver level and support statement
for your IBM server.
config PHANTOM
@@ -385,7 +385,7 @@
depends on I2C && SYSFS
help
If you say yes here you get support for the Bosch Sensortec
- BMP086 digital pressure sensor.
+ BMP085 digital pressure sensor.
To compile this driver as a module, choose M here: the
module will be called bmp085.
diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c
index 3e6c47b..ba29d2f 100644
--- a/drivers/mtd/chips/cfi_cmdset_0002.c
+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
@@ -418,8 +418,8 @@
/*
* Valid primary extension versions are: 1.0, 1.1, 1.2, 1.3, 1.4
- * see: http://www.amd.com/us-en/assets/content_type/DownloadableAssets/cfi_r20.pdf, page 19
- * http://www.amd.com/us-en/assets/content_type/DownloadableAssets/cfi_100_20011201.pdf
+ * see: http://cs.ozerki.net/zap/pub/axim-x5/docs/cfi_r20.pdf, page 19
+ * http://www.spansion.com/Support/AppNotes/cfi_100_20011201.pdf
* http://www.spansion.com/Support/Datasheets/s29ws-p_00_a12_e.pdf
*/
if (extp->MajorVersion != '1' ||
diff --git a/drivers/mtd/devices/lart.c b/drivers/mtd/devices/lart.c
index f4359fe..caf6041 100644
--- a/drivers/mtd/devices/lart.c
+++ b/drivers/mtd/devices/lart.c
@@ -17,7 +17,7 @@
* - January 2000
*
* [2] MTD internal API documentation
- * - http://www.linux-mtd.infradead.org/tech/
+ * - http://www.linux-mtd.infradead.org/
*
* Limitations:
*
diff --git a/drivers/mtd/ftl.c b/drivers/mtd/ftl.c
index 4d6a64c..037b399 100644
--- a/drivers/mtd/ftl.c
+++ b/drivers/mtd/ftl.c
@@ -51,7 +51,7 @@
Use of the FTL format for non-PCMCIA applications may be an
infringement of these patents. For additional information,
- contact M-Systems (http://www.m-sys.com) directly.
+ contact M-Systems directly. M-Systems since acquired by Sandisk.
======================================================================*/
#include <linux/mtd/blktrans.h>
diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index 701d942..9622126 100644
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -172,7 +172,7 @@
This provides a 'mapping' driver which supports the way in which
the flash chips are connected in the Octagon-5066 Single Board
Computer. More information on the board is available at
- <http://www.octagonsystems.com/CPUpages/5066.html>.
+ <http://www.octagonsystems.com/products/5066.aspx>.
config MTD_VMAX
tristate "JEDEC Flash device mapped on Tempustech VMAX SBC301"
@@ -284,7 +284,7 @@
chips, currently uses AMD one. This 'mapping' driver supports
that arrangement, allowing the CFI probe and command set driver
code to communicate with the chips on the TQM8xxL board. More at
- <http://www.denx.de/embedded-ppc-en.html>.
+ <http://www.denx.de/wiki/PPCEmbedded/>.
config MTD_RPXLITE
tristate "CFI Flash device mapped on RPX Lite or CLLF"
diff --git a/drivers/mtd/nand/cafe_nand.c b/drivers/mtd/nand/cafe_nand.c
index db1dfc5..e06c898 100644
--- a/drivers/mtd/nand/cafe_nand.c
+++ b/drivers/mtd/nand/cafe_nand.c
@@ -2,7 +2,7 @@
* Driver for One Laptop Per Child ‘CAFÉ’ controller, aka Marvell 88ALP01
*
* The data sheet for this device can be found at:
- * http://www.marvell.com/products/pcconn/88ALP01.jsp
+ * http://wiki.laptop.org/go/Datasheets
*
* Copyright © 2006 Red Hat, Inc.
* Copyright © 2006 David Woodhouse <dwmw2@infradead.org>
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 7ca1fc8..77c1fab 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -924,7 +924,7 @@
including the SMC91C94 and the SMC91C111. Say Y if you want it
compiled into the kernel, and read the file
<file:Documentation/networking/smc9.txt> and the Ethernet-HOWTO,
- available from <http://www.linuxdoc.org/docs.html#howto>.
+ available from <http://www.tldp.org/docs.html#howto>.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
@@ -1034,7 +1034,7 @@
including the new LAN9115, LAN9116, LAN9117, and LAN9118.
Say Y if you want it compiled into the kernel,
and read the Ethernet-HOWTO, available from
- <http://www.linuxdoc.org/docs.html#howto>.
+ <http://www.tldp.org/docs.html#howto>.
This driver is also available as a module. The module will be
called smc911x. If you want to compile it as a module, say M
@@ -1516,7 +1516,7 @@
For the latest Intel PRO/100 network driver for Linux, see:
- <http://appsr.intel.com/scripts-df/support_intel.asp>
+ <http://www.intel.com/p/en_US/support/highlights/network/pro100plus>
More specific information on configuring the driver is in
<file:Documentation/networking/e100.txt>.
@@ -1542,9 +1542,8 @@
select CRC32
select MII
help
- Say Y here to support the Mysom MTD-800 family of PCI-based Ethernet
- cards. Specifications and data at
- <http://www.myson.com.hk/mtd/datasheet/>.
+ Say Y here to support the Myson MTD-800 family of PCI-based Ethernet
+ cards. <http://www.myson.com.tw/>
config NATSEMI
tristate "National Semiconductor DP8381x series PCI Ethernet support"
@@ -1718,7 +1717,7 @@
This is a driver for SMSC's LAN9420 PCI ethernet adapter.
Say Y if you want it compiled into the kernel,
and read the Ethernet-HOWTO, available from
- <http://www.linuxdoc.org/docs.html#howto>.
+ <http://www.tldp.org/docs.html#howto>.
This driver is also available as a module. The module will be
called smsc9420. If you want to compile it as a module, say M
@@ -2565,7 +2564,7 @@
our website at <http://www.chelsio.com>.
For customer support, please visit our customer support page at
- <http://www.chelsio.com/support.htm>.
+ <http://www.chelsio.com/support.html>.
Please send feedback to <linux-bugs@chelsio.com>.
@@ -2597,7 +2596,7 @@
our website at <http://www.chelsio.com>.
For customer support, please visit our customer support page at
- <http://www.chelsio.com/support.htm>.
+ <http://www.chelsio.com/support.html>.
Please send feedback to <linux-bugs@chelsio.com>.
@@ -2622,7 +2621,7 @@
our website at <http://www.chelsio.com>.
For customer support, please visit our customer support page at
- <http://www.chelsio.com/support.htm>.
+ <http://www.chelsio.com/support.html>.
Please send feedback to <linux-bugs@chelsio.com>.
@@ -2645,7 +2644,7 @@
our website at <http://www.chelsio.com>.
For customer support, please visit our customer support page at
- <http://www.chelsio.com/support.htm>.
+ <http://www.chelsio.com/support.html>.
Please send feedback to <linux-bugs@chelsio.com>.
diff --git a/drivers/net/appletalk/Kconfig b/drivers/net/appletalk/Kconfig
index 20f97e7..0b376a9 100644
--- a/drivers/net/appletalk/Kconfig
+++ b/drivers/net/appletalk/Kconfig
@@ -19,7 +19,7 @@
General information about how to connect Linux, Windows machines and
Macs is on the WWW at <http://www.eats.com/linux_mac_win.html>. The
- NET-3-HOWTO, available from
+ NET3-4-HOWTO, available from
<http://www.tldp.org/docs.html#howto>, contains valuable
information as well.
diff --git a/drivers/net/atp.c b/drivers/net/atp.c
index dfd96b2..f345979 100644
--- a/drivers/net/atp.c
+++ b/drivers/net/atp.c
@@ -68,7 +68,7 @@
In 1997 Realtek made available the documentation for the second generation
RTL8012 chip, which has lead to several driver improvements.
- http://www.realtek.com.tw/cn/cn.html
+ http://www.realtek.com.tw/
Theory of Operation
diff --git a/drivers/net/depca.c b/drivers/net/depca.c
index 44c0694..91b3846 100644
--- a/drivers/net/depca.c
+++ b/drivers/net/depca.c
@@ -1487,7 +1487,7 @@
if (!pldev->dev.driver) {
/* The driver was not bound to this device, there was
* no hardware at this address. Unregister it, as the
- * release fuction will take care of freeing the
+ * release function will take care of freeing the
* allocated structure */
depca_io_ports[i].device = NULL;
diff --git a/drivers/net/epic100.c b/drivers/net/epic100.c
index 32543a3..aa56963 100644
--- a/drivers/net/epic100.c
+++ b/drivers/net/epic100.c
@@ -131,8 +131,8 @@
IVb. References
-http://www.smsc.com/main/tools/discontinued/83c171.pdf
-http://www.smsc.com/main/tools/discontinued/83c175.pdf
+http://www.smsc.com/media/Downloads_Public/discontinued/83c171.pdf
+http://www.smsc.com/media/Downloads_Public/discontinued/83c175.pdf
http://scyld.com/expert/NWay.html
http://www.national.com/pf/DP/DP83840A.html
diff --git a/drivers/net/hamradio/Kconfig b/drivers/net/hamradio/Kconfig
index 62d5d5c..95dbcfd 100644
--- a/drivers/net/hamradio/Kconfig
+++ b/drivers/net/hamradio/Kconfig
@@ -73,7 +73,7 @@
certain parameters, such as channel access timing, clock mode, and
DMA channel. This is accomplished with a small utility program,
dmascc_cfg, available at
- <http://cacofonix.nt.tuwien.ac.at/~oe1kib/Linux/>. Please be sure to
+ <http://www.linux-ax25.org/wiki/Ax25-tools>. Please be sure to
get at least version 1.27 of dmascc_cfg, as older versions will not
work with the current driver.
diff --git a/drivers/net/ibmlana.c b/drivers/net/ibmlana.c
index 0037a69..94d9969 100644
--- a/drivers/net/ibmlana.c
+++ b/drivers/net/ibmlana.c
@@ -23,7 +23,7 @@
'LAN Technical Reference Ethernet Adapter Interface Version 1 Release 1.0
Document Number SC30-3661-00' by IBM for info on the adapter itself
- Also see http://www.natsemi.com/
+ Also see http://www.national.com/analog
special acknowledgements to:
- Bob Eager for helping me out with documentation from IBM
diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c
index 75155a2..14db09e 100644
--- a/drivers/net/igb/igb_main.c
+++ b/drivers/net/igb/igb_main.c
@@ -3540,7 +3540,7 @@
* Stores a new ITR value based on strictly on packet size. This
* algorithm is less sophisticated than that used in igb_update_itr,
* due to the difficulty of synchronizing statistics across multiple
- * receive rings. The divisors and thresholds used by this fuction
+ * receive rings. The divisors and thresholds used by this function
* were determined based on theoretical maximum wire speed and testing
* data, in order to minimize response time while increasing bulk
* throughput.
diff --git a/drivers/net/irda/ali-ircc.c b/drivers/net/irda/ali-ircc.c
index a3cb109..92631eb 100644
--- a/drivers/net/irda/ali-ircc.c
+++ b/drivers/net/irda/ali-ircc.c
@@ -142,7 +142,7 @@
* Function ali_ircc_init ()
*
* Initialize chip. Find out whay kinds of chips we are dealing with
- * and their configuation registers address
+ * and their configuration registers address
*/
static int __init ali_ircc_init(void)
{
diff --git a/drivers/net/irda/donauboe.h b/drivers/net/irda/donauboe.h
index 36c3060..4dc39e5 100644
--- a/drivers/net/irda/donauboe.h
+++ b/drivers/net/irda/donauboe.h
@@ -54,7 +54,7 @@
/* anyone who has. HOWEVER the chip bears a striking resemblence */
/* to the IrDA controller in the Toshiba RISC TMPR3922 chip */
/* the documentation for this is freely available at */
-/* http://www.toshiba.com/taec/components/Generic/TMPR3922.shtml */
+/* http://www.madingley.org/james/resources/toshoboe/TMPR3922.pdf */
/* The mapping between the registers in that document and the */
/* Registers in the 701 oboe chip are as follows */
diff --git a/drivers/net/pci-skeleton.c b/drivers/net/pci-skeleton.c
index 8dd0343..1766dc4 100644
--- a/drivers/net/pci-skeleton.c
+++ b/drivers/net/pci-skeleton.c
@@ -78,7 +78,7 @@
IVb. References
-http://www.realtek.com.tw/cn/cn.html
+http://www.realtek.com.tw/
http://www.scyld.com/expert/NWay.html
IVc. Errata
diff --git a/drivers/net/pcmcia/3c574_cs.c b/drivers/net/pcmcia/3c574_cs.c
index 2807a0f..321b12f 100644
--- a/drivers/net/pcmcia/3c574_cs.c
+++ b/drivers/net/pcmcia/3c574_cs.c
@@ -62,7 +62,7 @@
V. References
http://www.scyld.com/expert/NWay.html
-http://www.national.com/pf/DP/DP83840.html
+http://www.national.com/opf/DP/DP83840A.html
Thanks to Terry Murphy of 3Com for providing development information for
earlier 3Com products.
diff --git a/drivers/net/ps3_gelic_net.c b/drivers/net/ps3_gelic_net.c
index 5526ab4..5ecfa4b 100644
--- a/drivers/net/ps3_gelic_net.c
+++ b/drivers/net/ps3_gelic_net.c
@@ -642,7 +642,7 @@
status = lv1_net_stop_rx_dma(bus_id(card), dev_id(card), 0);
if (status)
dev_err(ctodev(card),
- "lv1_net_stop_rx_dma faild, %d\n", status);
+ "lv1_net_stop_rx_dma failed, %d\n", status);
}
/**
@@ -660,7 +660,7 @@
status = lv1_net_stop_tx_dma(bus_id(card), dev_id(card), 0);
if (status)
dev_err(ctodev(card),
- "lv1_net_stop_tx_dma faild, status=%d\n", status);
+ "lv1_net_stop_tx_dma failed, status=%d\n", status);
}
/**
diff --git a/drivers/net/sb1250-mac.c b/drivers/net/sb1250-mac.c
index d8249d7..d96d2f7 100644
--- a/drivers/net/sb1250-mac.c
+++ b/drivers/net/sb1250-mac.c
@@ -95,7 +95,7 @@
#include <asm/sibyte/sb1250_regs.h>
#include <asm/sibyte/sb1250_int.h>
#else
-#error invalid SiByte MAC configuation
+#error invalid SiByte MAC configuration
#endif
#include <asm/sibyte/sb1250_scd.h>
#include <asm/sibyte/sb1250_mac.h>
@@ -106,7 +106,7 @@
#elif defined(CONFIG_SIBYTE_SB1250) || defined(CONFIG_SIBYTE_BCM112X)
#define UNIT_INT(n) (K_INT_MAC_0 + (n))
#else
-#error invalid SiByte MAC configuation
+#error invalid SiByte MAC configuration
#endif
#ifdef K_INT_PHY
@@ -1568,7 +1568,7 @@
M_MAC_RX_ENABLE |
M_MAC_TX_ENABLE, s->sbm_macenable);
#else
-#error invalid SiByte MAC configuation
+#error invalid SiByte MAC configuration
#endif
#ifdef CONFIG_SBMAC_COALESCE
diff --git a/drivers/net/sc92031.c b/drivers/net/sc92031.c
index 31b92f5..417adf3 100644
--- a/drivers/net/sc92031.c
+++ b/drivers/net/sc92031.c
@@ -15,7 +15,7 @@
* Rewritten for 2.6 by Cesar Eduardo Barros
*
* A datasheet for this chip can be found at
- * http://www.silan.com.cn/english/products/pdf/SC92031AY.pdf
+ * http://www.silan.com.cn/english/product/pdf/SC92031AY.pdf
*/
/* Note about set_mac_address: I don't know how to change the hardware
diff --git a/drivers/net/skfp/hwt.c b/drivers/net/skfp/hwt.c
index e6baa53..c0798fd 100644
--- a/drivers/net/skfp/hwt.c
+++ b/drivers/net/skfp/hwt.c
@@ -221,7 +221,7 @@
* para start start time
* duration time to wait
*
- * NOTE: The fuction will return immediately, if the timer is not
+ * NOTE: The function will return immediately, if the timer is not
* started
************************/
void hwt_wait_time(struct s_smc *smc, u_long start, long int duration)
diff --git a/drivers/net/skfp/skfddi.c b/drivers/net/skfp/skfddi.c
index ba2e833..0a66fed 100644
--- a/drivers/net/skfp/skfddi.c
+++ b/drivers/net/skfp/skfddi.c
@@ -33,7 +33,7 @@
* The driver architecture is based on the DEC FDDI driver by
* Lawrence V. Stefani and several ethernet drivers.
* I also used an existing Windows NT miniport driver.
- * All hardware dependent fuctions are handled by the SysKonnect
+ * All hardware dependent functions are handled by the SysKonnect
* Hardware Module.
* The only headerfiles that are directly related to this source
* are skfddi.c, h/types.h, h/osdef1st.h, h/targetos.h.
diff --git a/drivers/net/tlan.c b/drivers/net/tlan.c
index ec8c804..f8e463c 100644
--- a/drivers/net/tlan.c
+++ b/drivers/net/tlan.c
@@ -78,7 +78,7 @@
* - Updated tlan.txt accordingly.
* - Adjusted minimum/maximum frame length.
* - There is now a TLAN website up at
- * http://tlan.kernel.dk
+ * http://hp.sourceforge.net/
*
* v1.7 April 07, 2000 - Started to implement custom ioctls. Driver now
* reports PHY information when used with Donald
diff --git a/drivers/net/tokenring/tms380tr.c b/drivers/net/tokenring/tms380tr.c
index c83f4f6..663b886 100644
--- a/drivers/net/tokenring/tms380tr.c
+++ b/drivers/net/tokenring/tms380tr.c
@@ -5,7 +5,7 @@
* Originally sktr.c: Written 1997 by Christoph Goos
*
* A fine result of the Linux Systems Network Architecture Project.
- * http://www.linux-sna.org
+ * http://www.vanheusden.com/sna/
*
* This software may be used and distributed according to the terms
* of the GNU General Public License, incorporated herein by reference.
diff --git a/drivers/net/tulip/Kconfig b/drivers/net/tulip/Kconfig
index f303595..1f8d4a8 100644
--- a/drivers/net/tulip/Kconfig
+++ b/drivers/net/tulip/Kconfig
@@ -151,7 +151,7 @@
select CRC32
---help---
This driver is for ULi M5261/M5263 10/100M Ethernet Controller
- (<http://www.uli.com.tw/>).
+ (<http://www.nvidia.com/page/uli_drivers.html>).
To compile this driver as a module, choose M here. The module will
be called uli526x.
diff --git a/drivers/net/tulip/pnic2.c b/drivers/net/tulip/pnic2.c
index b819766..4690c8e 100644
--- a/drivers/net/tulip/pnic2.c
+++ b/drivers/net/tulip/pnic2.c
@@ -59,7 +59,7 @@
* Bit 14:12 - autonegotiation state (write 001 to start autonegotiate)
* Bit 3 - Autopolarity state
* Bit 2 - LS10B - link state of 10baseT 0 - good, 1 - failed
- * Bit 1 - LS100B - link state of 100baseT 0 - good, 1- faild
+ * Bit 1 - LS100B - link state of 100baseT 0 - good, 1 - failed
*
*
* Data Port Selection Info
diff --git a/drivers/net/usb/plusb.c b/drivers/net/usb/plusb.c
index 08555f8..08ad269 100644
--- a/drivers/net/usb/plusb.c
+++ b/drivers/net/usb/plusb.c
@@ -32,7 +32,7 @@
/*
- * Prolific PL-2301/PL-2302 driver ... http://www.prolifictech.com
+ * Prolific PL-2301/PL-2302 driver ... http://www.prolific.com.tw/
*
* The protocol and handshaking used here should be bug-compatible
* with the Linux 2.2 "plusb" driver, by Deti Fliegl.
diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig
index d08ce6a..423eb26 100644
--- a/drivers/net/wan/Kconfig
+++ b/drivers/net/wan/Kconfig
@@ -409,7 +409,7 @@
tristate "Cyclom 2X(tm) cards (EXPERIMENTAL)"
depends on WAN_ROUTER_DRIVERS && (PCI || ISA)
---help---
- Cyclom 2X from Cyclades Corporation <http://www.cyclades.com/> is an
+ Cyclom 2X from Cyclades Corporation <http://www.avocent.com/> is an
intelligent multiprotocol WAN adapter with data transfer rates up to
512 Kbps. These cards support the X.25 and SNA related protocols.
diff --git a/drivers/net/wan/hdlc.c b/drivers/net/wan/hdlc.c
index 9937bba..5d4bb61 100644
--- a/drivers/net/wan/hdlc.c
+++ b/drivers/net/wan/hdlc.c
@@ -109,7 +109,7 @@
return NOTIFY_DONE; /* not an HDLC device */
if (event != NETDEV_CHANGE)
- return NOTIFY_DONE; /* Only interrested in carrier changes */
+ return NOTIFY_DONE; /* Only interested in carrier changes */
on = netif_carrier_ok(dev);
diff --git a/drivers/net/wireless/ath/ath5k/ath5k.h b/drivers/net/wireless/ath/ath5k/ath5k.h
index 4a367cd..308b79e 100644
--- a/drivers/net/wireless/ath/ath5k/ath5k.h
+++ b/drivers/net/wireless/ath/ath5k/ath5k.h
@@ -348,7 +348,7 @@
/*
* Some of this information is based on Documentation from:
*
- * http://madwifi.org/wiki/ChipsetFeatures/SuperAG
+ * http://madwifi-project.org/wiki/ChipsetFeatures/SuperAG
*
* Modulation for Atheros' eXtended Range - range enhancing extension that is
* supposed to double the distance an Atheros client device can keep a
diff --git a/drivers/net/wireless/ath/ath5k/reg.h b/drivers/net/wireless/ath/ath5k/reg.h
index a34929f..ca79ecd 100644
--- a/drivers/net/wireless/ath/ath5k/reg.h
+++ b/drivers/net/wireless/ath/ath5k/reg.h
@@ -26,7 +26,6 @@
* Atheros presentations and papers like these:
*
* 5210 - http://nova.stanford.edu/~bbaas/ps/isscc2002_slides.pdf
- * http://www.it.iitb.ac.in/~janak/wifire/01222734.pdf
*
* 5211 - http://www.hotchips.org/archives/hc14/3_Tue/16_mcfarland.pdf
*
diff --git a/drivers/net/wireless/hostap/hostap_hw.c b/drivers/net/wireless/hostap/hostap_hw.c
index e9d9d62..b7cb165 100644
--- a/drivers/net/wireless/hostap/hostap_hw.c
+++ b/drivers/net/wireless/hostap/hostap_hw.c
@@ -2621,7 +2621,7 @@
iface = netdev_priv(dev);
local = iface->local;
- /* Detect early interrupt before driver is fully configued */
+ /* Detect early interrupt before driver is fully configured */
spin_lock(&local->irq_init_lock);
if (!dev->base_addr) {
if (net_ratelimit()) {
diff --git a/drivers/net/wireless/p54/Kconfig b/drivers/net/wireless/p54/Kconfig
index e5f45cb..25f965f 100644
--- a/drivers/net/wireless/p54/Kconfig
+++ b/drivers/net/wireless/p54/Kconfig
@@ -9,7 +9,7 @@
also need to be enabled in order to support any devices.
These devices require softmac firmware which can be found at
- http://prism54.org/
+ <http://wireless.kernel.org/en/users/Drivers/p54>
If you choose to build a module, it'll be called p54common.
@@ -21,7 +21,7 @@
This driver is for USB isl38xx based wireless cards.
These devices require softmac firmware which can be found at
- http://prism54.org/
+ <http://wireless.kernel.org/en/users/Drivers/p54>
If you choose to build a module, it'll be called p54usb.
@@ -35,7 +35,7 @@
supported by the fullmac driver/firmware.
This driver requires softmac firmware which can be found at
- http://prism54.org/
+ <http://wireless.kernel.org/en/users/Drivers/p54>
If you choose to build a module, it'll be called p54pci.
diff --git a/drivers/net/wireless/prism54/islpci_hotplug.c b/drivers/net/wireless/prism54/islpci_hotplug.c
index dc14420..b5e64d7 100644
--- a/drivers/net/wireless/prism54/islpci_hotplug.c
+++ b/drivers/net/wireless/prism54/islpci_hotplug.c
@@ -38,7 +38,7 @@
/* In this order: vendor, device, subvendor, subdevice, class, class_mask,
* driver_data
* If you have an update for this please contact prism54-devel@prism54.org
- * The latest list can be found at http://prism54.org/supported_cards.php */
+ * The latest list can be found at http://wireless.kernel.org/en/users/Drivers/p54 */
static DEFINE_PCI_DEVICE_TABLE(prism54_id_tbl) = {
/* Intersil PRISM Duette/Prism GT Wireless LAN adapter */
{
diff --git a/drivers/parisc/README.dino b/drivers/parisc/README.dino
index 097324f..1627426 100644
--- a/drivers/parisc/README.dino
+++ b/drivers/parisc/README.dino
@@ -10,8 +10,7 @@
** PCI bus. HP-supplied graphics cards that utilize the PCI bus are
** not affected."
**
-** REVISIT: "go/pci_defect" link below is stale.
-** HP Internal can use <http://hpfcdma.fc.hp.com:80/Dino/>
+** http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?locale=en_US&prodTypeId=12454&prodSeriesId=44443
**
** Product First Good Serial Number
** C200/C240 (US) US67350000
diff --git a/drivers/parport/parport_pc.c b/drivers/parport/parport_pc.c
index 0950fa4..8d62fb7 100644
--- a/drivers/parport/parport_pc.c
+++ b/drivers/parport/parport_pc.c
@@ -2599,7 +2599,7 @@
printk(KERN_INFO "parport_pc: ITE8873 found (1S)\n");
return 0;
case 0x8:
- DPRINTK(KERN_DEBUG "parport_pc: ITE8874 found (2S)\n");
+ printk(KERN_INFO "parport_pc: ITE8874 found (2S)\n");
return 0;
default:
printk(KERN_INFO "parport_pc: unknown ITE887x\n");
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 857ae01..cc96c71 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -226,6 +226,7 @@
* VIA Apollo KT133 needs PCI latency patch
* Made according to a windows driver based patch by George E. Breese
* see PCI Latency Adjust on http://www.viahardware.com/download/viatweak.shtm
+ * and http://www.georgebreese.com/net/software/#PCI
* Also see http://www.au-ja.org/review-kt133a-1-en.phtml for
* the info on which Mr Breese based his work.
*
@@ -1016,7 +1017,7 @@
/*
* Common misconfiguration of the MediaGX/Geode PCI master that will
* reduce PCI bandwidth from 70MB/s to 25MB/s. See the GXM/GXLV/GX1
- * datasheets found at http://www.national.com/ds/GX for info on what
+ * datasheets found at http://www.national.com/analog for info on what
* these bits do. <christer@weinigel.se>
*/
static void quirk_mediagx_master(struct pci_dev *dev)
diff --git a/drivers/pcmcia/yenta_socket.c b/drivers/pcmcia/yenta_socket.c
index 408dbaa..9dc565c6 100644
--- a/drivers/pcmcia/yenta_socket.c
+++ b/drivers/pcmcia/yenta_socket.c
@@ -1072,7 +1072,7 @@
* invisible during PCI scans because of a misconfigured subordinate number
* of the parent brige - some BIOSes seem to be too lazy to set it right.
* Does the fixup carefully by checking how far it can go without conflicts.
- * See http\://bugzilla.kernel.org/show_bug.cgi?id=2944 for more information.
+ * See http://bugzilla.kernel.org/show_bug.cgi?id=2944 for more information.
*/
static void yenta_fixup_parent_bridge(struct pci_bus *cardbus_bridge)
{
diff --git a/drivers/pnp/pnpbios/proc.c b/drivers/pnp/pnpbios/proc.c
index 2d8ac43..bc89f39 100644
--- a/drivers/pnp/pnpbios/proc.c
+++ b/drivers/pnp/pnpbios/proc.c
@@ -11,7 +11,6 @@
*
* The .../escd file is utilized by the lsescd utility written by
* Gunther Mayer.
- * http://home.t-online.de/home/gunther.mayer/lsescd
*
* The .../legacy_device_resources file is not used yet.
*
diff --git a/drivers/rtc/rtc-nuc900.c b/drivers/rtc/rtc-nuc900.c
index 62de66a..ddb0857 100644
--- a/drivers/rtc/rtc-nuc900.c
+++ b/drivers/rtc/rtc-nuc900.c
@@ -274,7 +274,7 @@
nuc900_rtc->rtcdev = rtc_device_register(pdev->name, &pdev->dev,
&nuc900_rtc_ops, THIS_MODULE);
if (IS_ERR(nuc900_rtc->rtcdev)) {
- dev_err(&pdev->dev, "rtc device register faild\n");
+ dev_err(&pdev->dev, "rtc device register failed\n");
err = PTR_ERR(nuc900_rtc->rtcdev);
goto fail3;
}
diff --git a/drivers/s390/block/dasd_3990_erp.c b/drivers/s390/block/dasd_3990_erp.c
index 85bfd87..e82d427 100644
--- a/drivers/s390/block/dasd_3990_erp.c
+++ b/drivers/s390/block/dasd_3990_erp.c
@@ -2197,7 +2197,7 @@
/*
*****************************************************************************
- * main ERP control fuctions (24 and 32 byte sense)
+ * main ERP control functions (24 and 32 byte sense)
*****************************************************************************
*/
diff --git a/drivers/s390/block/dasd_eckd.c b/drivers/s390/block/dasd_eckd.c
index 66360c2..59b4ecf 100644
--- a/drivers/s390/block/dasd_eckd.c
+++ b/drivers/s390/block/dasd_eckd.c
@@ -1190,7 +1190,7 @@
goto out_err2;
}
/*
- * dasd_eckd_vaildate_server is done on the first device that
+ * dasd_eckd_validate_server is done on the first device that
* is found for an LCU. All later other devices have to wait
* for it, so they will read the correct feature codes.
*/
@@ -1216,7 +1216,7 @@
"Read device characteristic failed, rc=%d", rc);
goto out_err3;
}
- /* find the vaild cylinder size */
+ /* find the valid cylinder size */
if (private->rdc_data.no_cyl == LV_COMPAT_CYL &&
private->rdc_data.long_no_cyl)
private->real_cyl = private->rdc_data.long_no_cyl;
diff --git a/drivers/s390/char/tape_3590.c b/drivers/s390/char/tape_3590.c
index fc993ac..deff2c3 100644
--- a/drivers/s390/char/tape_3590.c
+++ b/drivers/s390/char/tape_3590.c
@@ -31,7 +31,7 @@
EXPORT_SYMBOL(TAPE_DBF_AREA);
/*******************************************************************
- * Error Recovery fuctions:
+ * Error Recovery functions:
* - Read Opposite: implemented
* - Read Device (buffered) log: BRA
* - Read Library log: BRA
@@ -798,7 +798,7 @@
}
/*
- * This fuction is called, when error recovery was successfull
+ * This function is called, when error recovery was successful
*/
static inline int
tape_3590_erp_succeded(struct tape_device *device, struct tape_request *request)
@@ -809,7 +809,7 @@
}
/*
- * This fuction is called, when error recovery was not successfull
+ * This function is called, when error recovery was not successful
*/
static inline int
tape_3590_erp_failed(struct tape_device *device, struct tape_request *request,
diff --git a/drivers/s390/char/vmcp.c b/drivers/s390/char/vmcp.c
index 0e7cb1a..31a3ccb 100644
--- a/drivers/s390/char/vmcp.c
+++ b/drivers/s390/char/vmcp.c
@@ -47,7 +47,7 @@
{
struct vmcp_session *session;
- session = (struct vmcp_session *)file->private_data;
+ session = file->private_data;
file->private_data = NULL;
free_pages((unsigned long)session->response, get_order(session->bufsize));
kfree(session);
@@ -94,7 +94,7 @@
return -EFAULT;
}
cmd[count] = '\0';
- session = (struct vmcp_session *)file->private_data;
+ session = file->private_data;
if (mutex_lock_interruptible(&session->mutex)) {
kfree(cmd);
return -ERESTARTSYS;
@@ -136,7 +136,7 @@
int __user *argp;
int temp;
- session = (struct vmcp_session *)file->private_data;
+ session = file->private_data;
if (is_compat_task())
argp = compat_ptr(arg);
else
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index 2e9632e..8616496 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -116,7 +116,7 @@
<http://www.tldp.org/docs.html#howto> and
<file:Documentation/scsi/osst.txt> in the kernel source.
More info on the OnStream driver may be found on
- <http://linux1.onstream.nl/test/>
+ <http://sourceforge.net/projects/osst/>
Please also have a look at the standard st docu, as most of it
applies to osst as well.
@@ -156,9 +156,9 @@
directly, so you need some additional software which knows how to
talk to these devices using the SCSI protocol:
- For scanners, look at SANE (<http://www.mostang.com/sane/>). For CD
+ For scanners, look at SANE (<http://www.sane-project.org/>). For CD
writer software look at Cdrtools
- (<http://www.fokus.gmd.de/research/cc/glone/employees/joerg.schilling/private/cdrecord.html>)
+ (<http://cdrecord.berlios.de/private/cdrecord.html>)
and for burning a "disk at once": CDRDAO
(<http://cdrdao.sourceforge.net/>). Cdparanoia is a high
quality digital reader of audio CDs (<http://www.xiph.org/paranoia/>).
@@ -951,6 +951,7 @@
---help---
This is support for the IBM ServeRAID hardware RAID controllers.
See <http://www.developer.ibm.com/welcome/netfinity/serveraid.html>
+ and <http://www-947.ibm.com/support/entry/portal/docdisplay?brand=5000008&lndocid=SERV-RAID>
for more information. If this driver does not work correctly
without modification please contact the author by email at
<ipslinux@adaptec.com>.
@@ -1610,7 +1611,7 @@
host adapter with one dummy SCSI disk. Each dummy disk uses kernel
RAM as storage (i.e. it is a ramdisk). To save space when multiple
dummy disks are simulated, they share the same kernel RAM for
- their storage. See <http://www.torque.net/sg/sdebug.html> for more
+ their storage. See <http://sg.danny.cz/sg/sdebug26.html> for more
information. This driver is primarily of use to those testing the
SCSI and block subsystems. If unsure, say N.
diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c
index dae46d7..29c0ed1 100644
--- a/drivers/scsi/aacraid/linit.c
+++ b/drivers/scsi/aacraid/linit.c
@@ -771,7 +771,7 @@
{
if (!capable(CAP_SYS_RAWIO))
return -EPERM;
- return aac_compat_do_ioctl((struct aac_dev *)file->private_data, cmd, arg);
+ return aac_compat_do_ioctl(file->private_data, cmd, arg);
}
#endif
diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
index c3d7174..a345dde 100644
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -5509,7 +5509,7 @@
* @buff: Buffer containing config region 23 data.
* @size: Size of the data buffer.
*
- * This fuction parse the FCoE config parameters in config region 23 and
+ * This function parses the FCoE config parameters in config region 23 and
* populate driver data structure with the parameters.
*/
void
diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c
index 5428d53..909ed9e 100644
--- a/drivers/scsi/sg.c
+++ b/drivers/scsi/sg.c
@@ -212,7 +212,7 @@
static int sg_allow_access(struct file *filp, unsigned char *cmd)
{
- struct sg_fd *sfp = (struct sg_fd *)filp->private_data;
+ struct sg_fd *sfp = filp->private_data;
if (sfp->parentdp->device->type == TYPE_SCANNER)
return 0;
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index 167c4a6..4d8e14b 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -919,7 +919,7 @@
/*
* Exar ST16C2550 "A2" devices incorrectly detect as
* having an EFR, and report an ID of 0x0201. See
- * http://www.exar.com/info.php?pdf=dan180_oct2004.pdf
+ * http://linux.derkeiler.com/Mailing-Lists/Kernel/2004-11/4812.html
*/
if (autoconfig_read_divisor_id(up) == 0x0201 && size_fifo(up) == 16)
return 1;
diff --git a/drivers/serial/bfin_sport_uart.c b/drivers/serial/bfin_sport_uart.c
index 6f1b51e2..e95c524 100644
--- a/drivers/serial/bfin_sport_uart.c
+++ b/drivers/serial/bfin_sport_uart.c
@@ -10,7 +10,7 @@
/*
* This driver and the hardware supported are in term of EE-191 of ADI.
- * http://www.analog.com/UploadedFiles/Application_Notes/399447663EE191.pdf
+ * http://www.analog.com/static/imported-files/application_notes/EE191.pdf
* This application note describe how to implement a UART on a Sharc DSP,
* but this driver is implemented on Blackfin Processor.
* Transmit Frame Sync is not used by this driver to transfer data out.
diff --git a/drivers/serial/bfin_sport_uart.h b/drivers/serial/bfin_sport_uart.h
index 9ce253e..6d06ce1 100644
--- a/drivers/serial/bfin_sport_uart.h
+++ b/drivers/serial/bfin_sport_uart.h
@@ -10,7 +10,7 @@
/*
* This driver and the hardware supported are in term of EE-191 of ADI.
- * http://www.analog.com/UploadedFiles/Application_Notes/399447663EE191.pdf
+ * http://www.analog.com/static/imported-files/application_notes/EE191.pdf
* This application note describe how to implement a UART on a Sharc DSP,
* but this driver is implemented on Blackfin Processor.
* Transmit Frame Sync is not used by this driver to transfer data out.
diff --git a/drivers/serial/uartlite.c b/drivers/serial/uartlite.c
index c4bf54b..d2fce86 100644
--- a/drivers/serial/uartlite.c
+++ b/drivers/serial/uartlite.c
@@ -44,7 +44,7 @@
* Register definitions
*
* For register details see datasheet:
- * http://www.xilinx.com/bvdocs/ipcenter/data_sheet/opb_uartlite.pdf
+ * http://www.xilinx.com/support/documentation/ip_documentation/opb_uartlite.pdf
*/
#define ULITE_RX 0x00
diff --git a/drivers/staging/asus_oled/README b/drivers/staging/asus_oled/README
index 96b9717..0d82a6d 100644
--- a/drivers/staging/asus_oled/README
+++ b/drivers/staging/asus_oled/README
@@ -2,7 +2,7 @@
Driver for Asus OLED display present in some Asus laptops.
The code of this driver is based on 'asusoled' program taken from
- https://launchpad.net/asusoled/. I just wanted to have a simple
+ <http://lapsus.berlios.de/asus_oled.html>. I just wanted to have a simple
kernel driver for controlling this device, but I didn't know how
to do that. Now I know ;) Also, that program can not be used
with usbhid loaded, which means no USB mouse/keyboard while
diff --git a/drivers/staging/asus_oled/asus_oled.c b/drivers/staging/asus_oled/asus_oled.c
index 5b279fb..8c95d8c 100644
--- a/drivers/staging/asus_oled/asus_oled.c
+++ b/drivers/staging/asus_oled/asus_oled.c
@@ -24,7 +24,7 @@
*
*
* Asus OLED support is based on asusoled program taken from
- * https://launchpad.net/asusoled/.
+ * <http://lapsus.berlios.de/asus_oled.html>.
*
*
*/
diff --git a/drivers/staging/comedi/drivers/cb_pcimdas.c b/drivers/staging/comedi/drivers/cb_pcimdas.c
index ced346a..78b1410 100644
--- a/drivers/staging/comedi/drivers/cb_pcimdas.c
+++ b/drivers/staging/comedi/drivers/cb_pcimdas.c
@@ -37,7 +37,7 @@
Developed from cb_pcidas and skel by Richard Bytheway (mocelet@sucs.org).
Only supports DIO, AO and simple AI in it's present form.
No interrupts, multi channel or FIFO AI, although the card looks like it could support this.
-See http://www.measurementcomputing.com/PDFManuals/pcim-das1602_16.pdf for more details.
+See http://www.mccdaq.com/PDFs/Manuals/pcim-das1602-16.pdf for more details.
*/
#include "../comedidev.h"
diff --git a/drivers/staging/comedi/drivers/daqboard2000.c b/drivers/staging/comedi/drivers/daqboard2000.c
index 6af6c83..82be77d 100644
--- a/drivers/staging/comedi/drivers/daqboard2000.c
+++ b/drivers/staging/comedi/drivers/daqboard2000.c
@@ -50,8 +50,8 @@
With some help from our swedish distributor, we got the Windows sourcecode
for the card, and here are the findings so far.
- 1. A good document that describes the PCI interface chip is found at:
- http://plx.plxtech.com/download/9080/databook/9080db-106.pdf
+ 1. A good document that describes the PCI interface chip is 9080db-106.pdf
+ available from http://www.plxtech.com/products/io/pci9080
2. The initialization done so far is:
a. program the FPGA (windows code sans a lot of error messages)
diff --git a/drivers/staging/comedi/drivers/ni_labpc.c b/drivers/staging/comedi/drivers/ni_labpc.c
index 3acf7e6..1411dd8 100644
--- a/drivers/staging/comedi/drivers/ni_labpc.c
+++ b/drivers/staging/comedi/drivers/ni_labpc.c
@@ -37,7 +37,7 @@
yet been added to the driver, mainly due to the fact that
I don't know the device id numbers. If you have one
of these boards,
-please file a bug report at https://bugs.comedi.org/
+please file a bug report at http://comedi.org/
so I can get the necessary information from you.
The 1200 series boards have onboard calibration dacs for correcting
diff --git a/drivers/staging/comedi/drivers/ni_mio_common.c b/drivers/staging/comedi/drivers/ni_mio_common.c
index bd16f91..986ef67 100644
--- a/drivers/staging/comedi/drivers/ni_mio_common.c
+++ b/drivers/staging/comedi/drivers/ni_mio_common.c
@@ -34,7 +34,7 @@
340747b.pdf AT-MIO E series Register Level Programmer Manual
341079b.pdf PCI E Series RLPM
340934b.pdf DAQ-STC reference manual
- 67xx and 611x registers (from http://www.ni.com/pdf/daq/us)
+ 67xx and 611x registers (from ftp://ftp.ni.com/support/daq/mhddk/documentation/)
release_ni611x.pdf
release_ni67xx.pdf
Other possibly relevant info:
diff --git a/drivers/staging/comedi/drivers/plx9080.h b/drivers/staging/comedi/drivers/plx9080.h
index 485d63f..0d254a1 100644
--- a/drivers/staging/comedi/drivers/plx9080.h
+++ b/drivers/staging/comedi/drivers/plx9080.h
@@ -13,7 +13,7 @@
*
********************************************************************
*
- * Copyright (C) 1999 RG Studio s.c., http://www.rgstudio.com.pl/
+ * Copyright (C) 1999 RG Studio s.c.
* Written by Krzysztof Halasa <khc@rgstudio.com.pl>
*
* Portions (C) SBE Inc., used by permission.
diff --git a/drivers/staging/comedi/drivers/rtd520.c b/drivers/staging/comedi/drivers/rtd520.c
index 0367d2b..a49a7c5 100644
--- a/drivers/staging/comedi/drivers/rtd520.c
+++ b/drivers/staging/comedi/drivers/rtd520.c
@@ -59,7 +59,7 @@
Data sheet: http://www.rtdusa.com/pdf/dm7520.pdf
Example source: http://www.rtdusa.com/examples/dm/dm7520.zip
Call them and ask for the register level manual.
- PCI chip: http://www.plxtech.com/products/toolbox/9080.htm
+ PCI chip: http://www.plxtech.com/products/io/pci9080
Notes:
This board is memory mapped. There is some IO stuff, but it isn't needed.
diff --git a/drivers/staging/quickstart/quickstart.c b/drivers/staging/quickstart/quickstart.c
index 6612247..ba8f670 100644
--- a/drivers/staging/quickstart/quickstart.c
+++ b/drivers/staging/quickstart/quickstart.c
@@ -5,8 +5,7 @@
* Copyright (C) 2007-2010 Angelo Arrifano <miknix@gmail.com>
*
* Information gathered from disassebled dsdt and from here:
- * "http://download.microsoft.com/download/9/c/5/
- * 9c5b2167-8017-4bae-9fde-d599bac8184a/DirAppLaunch_Vista.doc"
+ * <http://www.microsoft.com/whdc/system/platform/firmware/DirAppLaunch.mspx>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/drivers/uio/Kconfig b/drivers/uio/Kconfig
index 1da73ec..bb44079 100644
--- a/drivers/uio/Kconfig
+++ b/drivers/uio/Kconfig
@@ -17,9 +17,9 @@
depends on PCI
help
Driver for Hilscher CIF DeviceNet and Profibus cards. This
- driver requires a userspace component that handles all of the
- heavy lifting and can be found at:
- http://www.osadl.org/projects/downloads/UIO/user/cif-*
+ driver requires a userspace component called cif that handles
+ all of the heavy lifting and can be found at:
+ <http://www.osadl.org/projects/downloads/UIO/user/>
To compile this driver as a module, choose M here: the module
will be called uio_cif.
diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c
index 387e503..bdec36a 100644
--- a/drivers/usb/gadget/at91_udc.c
+++ b/drivers/usb/gadget/at91_udc.c
@@ -1266,7 +1266,6 @@
csr |= AT91_UDP_TXPKTRDY;
__raw_writel(csr, creg);
udc->req_pending = 0;
- return;
}
static void handle_ep0(struct at91_udc *udc)
diff --git a/drivers/usb/gadget/f_audio.c b/drivers/usb/gadget/f_audio.c
index 1f48ceb..00975ed 100644
--- a/drivers/usb/gadget/f_audio.c
+++ b/drivers/usb/gadget/f_audio.c
@@ -317,8 +317,6 @@
u_audio_playback(&audio->card, play_buf->buf, play_buf->actual);
f_audio_buffer_free(play_buf);
-
- return;
}
static int f_audio_out_ep_complete(struct usb_ep *ep, struct usb_request *req)
diff --git a/drivers/usb/gadget/f_hid.c b/drivers/usb/gadget/f_hid.c
index 2b98bd2..4f891ed 100644
--- a/drivers/usb/gadget/f_hid.c
+++ b/drivers/usb/gadget/f_hid.c
@@ -318,8 +318,6 @@
spin_unlock(&hidg->spinlock);
wake_up(&hidg->read_queue);
-
- return;
}
static int hidg_setup(struct usb_function *f,
@@ -413,8 +411,6 @@
usb_ep_disable(hidg->in_ep);
hidg->in_ep->driver_data = NULL;
-
- return;
}
static int hidg_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c
index c16b402..4c55eda 100644
--- a/drivers/usb/gadget/fsl_udc_core.c
+++ b/drivers/usb/gadget/fsl_udc_core.c
@@ -287,8 +287,6 @@
temp = fsl_readl(&dr_regs->usbcmd);
temp |= USB_CMD_RUN_STOP;
fsl_writel(temp, &dr_regs->usbcmd);
-
- return;
}
static void dr_controller_stop(struct fsl_udc *udc)
@@ -308,8 +306,6 @@
tmp = fsl_readl(&dr_regs->usbcmd);
tmp &= ~USB_CMD_RUN_STOP;
fsl_writel(tmp, &dr_regs->usbcmd);
-
- return;
}
static void dr_ep_setup(unsigned char ep_num, unsigned char dir,
@@ -416,8 +412,6 @@
p_QH->max_pkt_length = cpu_to_le32(tmp);
p_QH->next_dtd_ptr = 1;
p_QH->size_ioc_int_sts = 0;
-
- return;
}
/* Setup qh structure and ep register for ep0. */
diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c
index 027d66f..2efd673 100644
--- a/drivers/usb/gadget/pxa27x_udc.c
+++ b/drivers/usb/gadget/pxa27x_udc.c
@@ -1394,8 +1394,6 @@
}
spin_unlock_irqrestore(&ep->lock, flags);
-
- return;
}
/**
diff --git a/drivers/usb/gadget/rndis.c b/drivers/usb/gadget/rndis.c
index 5b31404..d3cdffe 100644
--- a/drivers/usb/gadget/rndis.c
+++ b/drivers/usb/gadget/rndis.c
@@ -918,8 +918,6 @@
if (configNr >= RNDIS_MAX_CONFIGS) return;
rndis_per_dev_params[configNr].used = 0;
-
- return;
}
int rndis_set_param_dev(u8 configNr, struct net_device *dev, u16 *cdc_filter)
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 15fe3ec..2adae8e 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -1095,7 +1095,6 @@
ep->hcpriv = NULL;
done:
spin_unlock_irqrestore (&ehci->lock, flags);
- return;
}
static void
diff --git a/drivers/usb/host/imx21-hcd.c b/drivers/usb/host/imx21-hcd.c
index 1dfb2c8..e49b75a 100644
--- a/drivers/usb/host/imx21-hcd.c
+++ b/drivers/usb/host/imx21-hcd.c
@@ -27,8 +27,8 @@
* * 32 transfer descriptors (called ETDs)
* * 4Kb of Data memory
*
- * The data memory is shared between the host and fuction controlers
- * (but this driver only supports the host controler)
+ * The data memory is shared between the host and function controllers
+ * (but this driver only supports the host controller)
*
* So setting up a transfer involves:
* * Allocating a ETD
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index 3b57850..f3713f4 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -370,7 +370,6 @@
}
ep->hcpriv = NULL;
spin_unlock_irqrestore (&ohci->lock, flags);
- return;
}
static int ohci_get_frame (struct usb_hcd *hcd)
diff --git a/drivers/usb/host/oxu210hp-hcd.c b/drivers/usb/host/oxu210hp-hcd.c
index d32c3ea..32149be 100644
--- a/drivers/usb/host/oxu210hp-hcd.c
+++ b/drivers/usb/host/oxu210hp-hcd.c
@@ -544,8 +544,6 @@
qtd->buffer = NULL;
spin_unlock(&oxu->mem_lock);
-
- return;
}
static inline void ehci_qtd_init(struct ehci_qtd *qtd, dma_addr_t dma)
@@ -571,8 +569,6 @@
oxu->qtd_used[index] = 0;
spin_unlock(&oxu->mem_lock);
-
- return;
}
static struct ehci_qtd *ehci_qtd_alloc(struct oxu_hcd *oxu)
@@ -615,8 +611,6 @@
oxu->qh_used[index] = 0;
spin_unlock(&oxu->mem_lock);
-
- return;
}
static void qh_destroy(struct kref *kref)
@@ -693,8 +687,6 @@
oxu->murb_used[index] = 0;
spin_unlock(&oxu->mem_lock);
-
- return;
}
static struct oxu_murb *oxu_murb_alloc(struct oxu_hcd *oxu)
@@ -3070,7 +3062,6 @@
ep->hcpriv = NULL;
done:
spin_unlock_irqrestore(&oxu->lock, flags);
- return;
}
static int oxu_get_frame(struct usb_hcd *hcd)
diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
index 464ed97..4c502c8 100644
--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -342,8 +342,6 @@
writel(0x3f, op_reg_base + EHCI_USBSTS);
iounmap(base);
-
- return;
}
/*
diff --git a/drivers/usb/host/u132-hcd.c b/drivers/usb/host/u132-hcd.c
index 5b31bae..fab7649 100644
--- a/drivers/usb/host/u132-hcd.c
+++ b/drivers/usb/host/u132-hcd.c
@@ -316,7 +316,6 @@
} else if (queue_delayed_work(workqueue, &ring->scheduler, 0))
return;
kref_put(&u132->kref, u132_hcd_delete);
- return;
}
static void u132_ring_queue_work(struct u132 *u132, struct u132_ring *ring,
@@ -324,7 +323,6 @@
{
kref_get(&u132->kref);
u132_ring_requeue_work(u132, ring, delta);
- return;
}
static void u132_ring_cancel_work(struct u132 *u132, struct u132_ring *ring)
@@ -543,7 +541,6 @@
mutex_unlock(&u132->scheduler_lock);
u132_endp_put_kref(u132, endp);
usb_hcd_giveback_urb(hcd, urb, status);
- return;
}
static void u132_hcd_forget_urb(struct u132 *u132, struct u132_endp *endp,
@@ -574,8 +571,8 @@
endp->active = 0;
spin_unlock_irqrestore(&endp->queue_lock.slock, irqs);
kfree(urbq);
- } usb_hcd_giveback_urb(hcd, urb, status);
- return;
+ }
+ usb_hcd_giveback_urb(hcd, urb, status);
}
static inline int edset_input(struct u132 *u132, struct u132_ring *ring,
@@ -3085,7 +3082,6 @@
u132->endp[endps] = NULL;
mutex_unlock(&u132->sw_lock);
- return;
}
static int __devinit u132_probe(struct platform_device *pdev)
diff --git a/drivers/usb/image/microtek.c b/drivers/usb/image/microtek.c
index 3a6bcd5..5a47805 100644
--- a/drivers/usb/image/microtek.c
+++ b/drivers/usb/image/microtek.c
@@ -398,7 +398,6 @@
context->srb->result = DID_ERROR << 16;
mts_transfer_cleanup(transfer);
}
- return;
}
@@ -409,7 +408,6 @@
if ( likely(context->final_callback != NULL) )
context->final_callback(context->srb);
-
}
static void mts_transfer_done( struct urb *transfer )
@@ -420,8 +418,6 @@
context->srb->result |= (unsigned)(*context->scsi_status)<<1;
mts_transfer_cleanup(transfer);
-
- return;
}
@@ -452,8 +448,6 @@
}
mts_get_status(transfer);
-
- return;
}
@@ -496,8 +490,6 @@
mts_get_status(transfer);
}
}
-
- return;
}
static void mts_do_sg (struct urb* transfer)
@@ -522,7 +514,6 @@
sg[context->fragment].length,
context->fragment + 1 == scsi_sg_count(context->srb) ?
mts_data_done : mts_do_sg);
- return;
}
static const u8 mts_read_image_sig[] = { 0x28, 00, 00, 00 };
diff --git a/drivers/usb/misc/ftdi-elan.c b/drivers/usb/misc/ftdi-elan.c
index c8eec9c..7839c98 100644
--- a/drivers/usb/misc/ftdi-elan.c
+++ b/drivers/usb/misc/ftdi-elan.c
@@ -456,7 +456,6 @@
static void ftdi_elan_kick_command_queue(struct usb_ftdi *ftdi)
{
ftdi_command_queue_work(ftdi, 0);
- return;
}
static void ftdi_elan_command_work(struct work_struct *work)
@@ -483,7 +482,6 @@
static void ftdi_elan_kick_respond_queue(struct usb_ftdi *ftdi)
{
ftdi_respond_queue_work(ftdi, 0);
- return;
}
static void ftdi_elan_respond_work(struct work_struct *work)
diff --git a/drivers/usb/mon/mon_main.c b/drivers/usb/mon/mon_main.c
index 812dc28..1040511 100644
--- a/drivers/usb/mon/mon_main.c
+++ b/drivers/usb/mon/mon_main.c
@@ -90,7 +90,6 @@
r->rnf_submit(r->r_data, urb);
}
spin_unlock_irqrestore(&mbus->lock, flags);
- return;
}
static void mon_submit(struct usb_bus *ubus, struct urb *urb)
@@ -117,7 +116,6 @@
r->rnf_error(r->r_data, urb, error);
}
spin_unlock_irqrestore(&mbus->lock, flags);
- return;
}
static void mon_submit_error(struct usb_bus *ubus, struct urb *urb, int error)
diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig
index 9505810..c2b2976 100644
--- a/drivers/usb/serial/Kconfig
+++ b/drivers/usb/serial/Kconfig
@@ -176,7 +176,7 @@
help
Say Y here if you want to connect to your HandSpring Visor, Palm
m500 or m505 through its USB docking station. See
- <http://usbvisor.sourceforge.net/> for more information on using this
+ <http://usbvisor.sourceforge.net/index.php3> for more information on using this
driver.
To compile this driver as a module, choose M here: the
@@ -289,7 +289,7 @@
and was developed with their support. You must also include
firmware to support your particular device(s).
- See <http://misc.nu/hugh/keyspan.html> for more information.
+ See <http://blemings.org/hugh/keyspan.html> for more information.
To compile this driver as a module, choose M here: the
module will be called keyspan.
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index f5d0674..2edf238 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -1320,8 +1320,6 @@
cypress_set_dead(port);
}
}
-
- return;
} /* cypress_read_int_callback */
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 37b57c7..89a9a58 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -2108,7 +2108,6 @@
}
}
- return;
}
static int ftdi_tiocmget(struct tty_struct *tty, struct file *file)
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index cf1aea1b..7dfe02f1 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -46,7 +46,7 @@
#define FTDI_USINT_RS232_PID 0xb812 /* Navigator RS232 and CONFIG lines */
/* OOCDlink by Joern Kaipf <joernk@web.de>
- * (http://www.joernonline.de/dw/doku.php?id=start&idx=projects:oocdlink) */
+ * (http://www.joernonline.de/) */
#define FTDI_OOCDLINK_PID 0xbaf8 /* Amontec JTAGkey */
/* Luminary Micro Stellaris Boards, VID = FTDI_VID */
@@ -336,7 +336,7 @@
#define FTDI_PIEGROUP_PID 0xF208 /* Product Id */
/* ACT Solutions HomePro ZWave interface
- (http://www.act-solutions.com/HomePro.htm) */
+ (http://www.act-solutions.com/HomePro-Product-Matrix.html) */
#define FTDI_ACTZWAVE_PID 0xF2D0
/*
@@ -367,7 +367,7 @@
#define FTDI_SUUNTO_SPORTS_PID 0xF680 /* Suunto Sports instrument */
/* USB-UIRT - An infrared receiver and transmitter using the 8U232AM chip */
-/* http://home.earthlink.net/~jrhees/USBUIRT/index.htm */
+/* http://www.usbuirt.com/ */
#define FTDI_USB_UIRT_PID 0xF850 /* Product Id */
/* CCS Inc. ICDU/ICDU40 product ID -
@@ -396,7 +396,7 @@
*/
#define FTDI_HE_TIRA1_PID 0xFA78 /* Tira-1 IR transceiver */
-/* Inside Accesso contactless reader (http://www.insidefr.com) */
+/* Inside Accesso contactless reader (http://www.insidecontactless.com/) */
#define INSIDE_ACCESSO 0xFAD0
/*
@@ -635,14 +635,14 @@
/*
* JETI SPECTROMETER SPECBOS 1201
- * http://www.jeti.com/products/sys/scb/scb1201.php
+ * http://www.jeti.com/cms/index.php/instruments/other-instruments/specbos-2101
*/
#define JETI_VID 0x0c6c
#define JETI_SPC1201_PID 0x04b2
/*
* FTDI USB UART chips used in construction projects from the
- * Elektor Electronics magazine (http://elektor-electronics.co.uk)
+ * Elektor Electronics magazine (http://www.elektor.com/)
*/
#define ELEKTOR_VID 0x0C7D
#define ELEKTOR_FT323R_PID 0x0005 /* RFID-Reader, issue 09-2006 */
diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c
index a42b29a..26710b1 100644
--- a/drivers/usb/serial/garmin_gps.c
+++ b/drivers/usb/serial/garmin_gps.c
@@ -1264,7 +1264,6 @@
garmin_data_p->flags &= ~FLAGS_BULK_IN_ACTIVE;
spin_unlock_irqrestore(&garmin_data_p->lock, flags);
}
- return;
}
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index a0ab78a..cd769ef 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -1467,8 +1467,6 @@
if (status != 0)
return;
}
-
- return;
}
@@ -1775,8 +1773,6 @@
dbg("%s - error sending break set/clear command.",
__func__);
}
-
- return;
}
@@ -2047,7 +2043,6 @@
dbg("%s - Unrecognized IOSP status code %u", __func__, code);
break;
}
- return;
}
@@ -2100,8 +2095,6 @@
/* Save the new modem status */
edge_port->shadowMSR = newMsr & 0xf0;
-
- return;
}
@@ -2148,8 +2141,6 @@
icount->parity++;
if (newLsr & LSR_FRM_ERR)
icount->frame++;
-
- return;
}
@@ -2725,7 +2716,6 @@
baud = tty_termios_baud_rate(old_termios);
tty_encode_baud_rate(tty, baud, baud);
}
- return;
}
@@ -2927,7 +2917,6 @@
0x40, 0x4000, 0x0001, NULL, 0, 3000);
release_firmware(fw);
- return;
}
diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c
index 4dad27a..22506b0 100644
--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -1571,8 +1571,6 @@
}
}
tty_kref_put(tty);
-
- return;
}
static void handle_new_lsr(struct edgeport_port *edge_port, int lsr_data,
@@ -2424,7 +2422,6 @@
dbg("%s - error %d when trying to write config to device",
__func__, status);
kfree(config);
- return;
}
static void edge_set_termios(struct tty_struct *tty,
@@ -2445,7 +2442,6 @@
return;
/* change the port settings to the new ones specified */
change_port_settings(tty, edge_port, old_termios);
- return;
}
static int edge_tiocmset(struct tty_struct *tty, struct file *file,
diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c
index efc7211..12ed594 100644
--- a/drivers/usb/serial/iuu_phoenix.c
+++ b/drivers/usb/serial/iuu_phoenix.c
@@ -807,7 +807,6 @@
iuu_uart_read_callback, port);
result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
dbg("%s - submit result = %d", __func__, result);
- return;
}
static int iuu_uart_on(struct usb_serial_port *port)
diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c
index 297163c..0791778 100644
--- a/drivers/usb/serial/keyspan.c
+++ b/drivers/usb/serial/keyspan.c
@@ -9,7 +9,7 @@
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
- See http://misc.nu/hugh/keyspan.html for more information.
+ See http://blemings.org/hugh/keyspan.html for more information.
Code in this driver inspired by and in a number of places taken
from Brian Warner's original Keyspan-PDA driver.
diff --git a/drivers/usb/serial/keyspan.h b/drivers/usb/serial/keyspan.h
index bf3297d..2d8baf6 100644
--- a/drivers/usb/serial/keyspan.h
+++ b/drivers/usb/serial/keyspan.h
@@ -9,7 +9,7 @@
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
- See http://misc.nu/hugh/keyspan.html for more information.
+ See http://blemings.org/hugh/keyspan.html for more information.
Code in this driver inspired by and in a number of places taken
from Brian Warner's original Keyspan-PDA driver.
diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c
index 185fe9a..a10dd56 100644
--- a/drivers/usb/serial/keyspan_pda.c
+++ b/drivers/usb/serial/keyspan_pda.c
@@ -292,7 +292,6 @@
port->interrupt_in_urb->dev = port->serial->dev;
if (usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL))
dbg(" usb_submit_urb(read urb) failed");
- return;
}
diff --git a/drivers/usb/serial/mct_u232.h b/drivers/usb/serial/mct_u232.h
index 3a3f5e6..d325bb8 100644
--- a/drivers/usb/serial/mct_u232.h
+++ b/drivers/usb/serial/mct_u232.h
@@ -10,10 +10,9 @@
*
* This driver is for the device MCT USB-RS232 Converter (25 pin, Model No.
* U232-P25) from Magic Control Technology Corp. (there is also a 9 pin
- * Model No. U232-P9). See http://www.mct.com.tw/p_u232.html for further
- * information. The properties of this device are listed at the end of this
- * file. This device is available from various distributors. I know Hana,
- * http://www.hana.de and D-Link, http://www.dlink.com/products/usb/dsbs25.
+ * Model No. U232-P9). See http://www.mct.com.tw/products/product_us232.html
+ * for further information. The properties of this device are listed at the end
+ * of this file. This device was used in the Dlink DSB-S25.
*
* All of the information about the device was acquired by using SniffUSB
* on Windows98. The technical details of the reverse engineering are
@@ -458,7 +457,7 @@
* embedded UART. Exhaustive documentation for these is available at:
*
* http://www.semiconductors.philips.com/pip/p87c52ubaa
- * http://www.semiconductors.philips.com/pip/pdiusbd12
+ * http://www.nxp.com/acrobat_download/various/PDIUSBD12_PROGRAMMING_GUIDE.pdf
*
* Thanks to Julian Highfield for the pointer to the Philips database.
*
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index fd0b641..7d3bc9a 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -827,7 +827,6 @@
dev_err(&urb->dev->dev,
"%s - Error %d submitting control urb\n",
__func__, result);
- return;
}
/*
@@ -907,7 +906,6 @@
dev_err(&urb->dev->dev,
"%s - Error %d submitting control urb\n",
__func__, result);
- return;
}
/*
@@ -1227,8 +1225,6 @@
mos7720_port->shadowLCR = data;
write_mos_reg(serial, port->number - port->serial->minor,
LCR, mos7720_port->shadowLCR);
-
- return;
}
/*
@@ -1746,7 +1742,6 @@
dbg("usb_submit_urb(read bulk) failed, status = %d",
status);
}
- return;
}
/*
@@ -1803,7 +1798,6 @@
dbg("usb_submit_urb(read bulk) failed, status = %d",
status);
}
- return;
}
/*
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index 93dad58..5627993 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -1367,8 +1367,6 @@
mos7840_port->shadowLCR);
mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER,
mos7840_port->shadowLCR);
-
- return;
}
/*****************************************************************************
@@ -1599,8 +1597,6 @@
if (status < 0)
return;
}
-
- return;
}
/*****************************************************************************
@@ -2075,8 +2071,6 @@
mos7840_port->delta_msr_cond = 1;
dbg("mos7840_change_port_settings mos7840_port->shadowLCR is End %x",
mos7840_port->shadowLCR);
-
- return;
}
/*****************************************************************************
@@ -2145,7 +2139,6 @@
mos7840_port->read_urb_busy = false;
}
}
- return;
}
/*****************************************************************************
diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c
index 89c724c..60f38d5 100644
--- a/drivers/usb/serial/omninet.c
+++ b/drivers/usb/serial/omninet.c
@@ -246,8 +246,6 @@
dev_err(&port->dev,
"%s - failed resubmitting read urb, error %d\n",
__func__, result);
-
- return;
}
static int omninet_write(struct tty_struct *tty, struct usb_serial_port *port,
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index d47b56e..7481ff8 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -620,8 +620,6 @@
dev_err(&port->dev, "resubmit read urb failed."
"(%d)\n", err);
}
-
- return;
}
static void sierra_instat_callback(struct urb *urb)
diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c
index 329d311..765aa98 100644
--- a/drivers/usb/serial/spcp8x5.c
+++ b/drivers/usb/serial/spcp8x5.c
@@ -441,7 +441,6 @@
spcp8x5_set_workMode(serial->dev, 0x000a,
SET_WORKING_MODE_U2C, priv->type);
}
- return;
}
/* open the serial port. do some usb system call. set termios and get the line
diff --git a/drivers/usb/serial/usb_wwan.c b/drivers/usb/serial/usb_wwan.c
index 0c70b4a..fbc9467 100644
--- a/drivers/usb/serial/usb_wwan.c
+++ b/drivers/usb/serial/usb_wwan.c
@@ -234,7 +234,6 @@
}
}
- return;
}
static void usb_wwan_outdat_callback(struct urb *urb)
diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c
index 12ed820..3f9ac88 100644
--- a/drivers/usb/serial/whiteheat.c
+++ b/drivers/usb/serial/whiteheat.c
@@ -655,8 +655,6 @@
}
kfree(info);
}
-
- return;
}
static int whiteheat_open(struct tty_struct *tty, struct usb_serial_port *port)
@@ -955,8 +953,6 @@
spin_lock_irq(&info->lock);
info->flags |= THROTTLED;
spin_unlock_irq(&info->lock);
-
- return;
}
@@ -975,8 +971,6 @@
if (actually_throttled)
rx_data_softint(&info->rx_work);
-
- return;
}
diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig
index f2767cf..49a489e 100644
--- a/drivers/usb/storage/Kconfig
+++ b/drivers/usb/storage/Kconfig
@@ -36,7 +36,7 @@
depends on USB_STORAGE
help
Support for certain Datafab CompactFlash readers.
- Datafab has a web page at <http://www.datafabusa.com/>.
+ Datafab has a web page at <http://www.datafab.com/>.
If this driver is compiled as a module, it will be named ums-datafab.
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 8b31fdf..dc06ff1 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -49,7 +49,7 @@
You need an utility program called fbset to make full use of frame
buffer devices. Please read <file:Documentation/fb/framebuffer.txt>
and the Framebuffer-HOWTO at
- <http://www.munted.org.uk/programming/Framebuffer-HOWTO-1.2.html> for more
+ <http://www.munted.org.uk/programming/Framebuffer-HOWTO-1.3.html> for more
information.
Say Y here and to the driver for your graphics board below if you
@@ -955,7 +955,7 @@
Build in support for the SED1355 Epson Research Embedded RAMDAC
LCD/CRT Controller (since redesignated as the S1D13505) as a
framebuffer. Product specs at
- <http://www.erd.epson.com/vdc/html/products.htm>.
+ <http://vdc.epson.com/>.
config FB_S1D13XXX
tristate "Epson S1D13XXX framebuffer support"
@@ -966,7 +966,7 @@
help
Support for S1D13XXX framebuffer device family (currently only
working with S1D13806). Product specs at
- <http://www.erd.epson.com/vdc/html/legacy_13xxx.htm>
+ <http://vdc.epson.com/>
config FB_ATMEL
tristate "AT91/AT32 LCD Controller support"
@@ -1323,7 +1323,7 @@
don't need to choose this to run the Radeon in plain VGA mode.
There is a product page at
- http://apps.ati.com/ATIcompare/
+ http://products.amd.com/en-us/GraphicCardResult.aspx
config FB_RADEON_I2C
bool "DDC/I2C for ATI Radeon support"
@@ -1395,7 +1395,7 @@
Say Y here to support use of ATI's 64-bit Rage boards (or other
boards based on the Mach64 CT, VT, GT, and LT chipsets) as a
framebuffer device. The ATI product support page for these boards
- is at <http://support.ati.com/products/pc/mach64/>.
+ is at <http://support.ati.com/products/pc/mach64/mach64.html>.
config FB_ATY_GENERIC_LCD
bool "Mach64 generic LCD support (EXPERIMENTAL)"
diff --git a/drivers/video/arcfb.c b/drivers/video/arcfb.c
index f3d7440..3ec4923 100644
--- a/drivers/video/arcfb.c
+++ b/drivers/video/arcfb.c
@@ -2,7 +2,6 @@
* linux/drivers/video/arcfb.c -- FB driver for Arc monochrome LCD board
*
* Copyright (C) 2005, Jaya Kumar <jayalk@intworks.biz>
- * http://www.intworks.biz/arclcd
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file COPYING in the main directory of this archive for
diff --git a/drivers/video/bf54x-lq043fb.c b/drivers/video/bf54x-lq043fb.c
index b020ba7..e7d0f52 100644
--- a/drivers/video/bf54x-lq043fb.c
+++ b/drivers/video/bf54x-lq043fb.c
@@ -241,12 +241,12 @@
u16 disp = fbi->mach_info->disp;
if (gpio_request(disp, DRIVER_NAME)) {
- printk(KERN_ERR "Requesting GPIO %d faild\n", disp);
+ printk(KERN_ERR "Requesting GPIO %d failed\n", disp);
return -EFAULT;
}
if (peripheral_request_list(eppi_req_18, DRIVER_NAME)) {
- printk(KERN_ERR "Requesting Peripherals faild\n");
+ printk(KERN_ERR "Requesting Peripherals failed\n");
gpio_free(disp);
return -EFAULT;
}
@@ -256,7 +256,7 @@
u16 eppi_req_24[] = EPPI0_24;
if (peripheral_request_list(eppi_req_24, DRIVER_NAME)) {
- printk(KERN_ERR "Requesting Peripherals faild\n");
+ printk(KERN_ERR "Requesting Peripherals failed\n");
peripheral_free_list(eppi_req_18);
gpio_free(disp);
return -EFAULT;
diff --git a/drivers/video/bfin-t350mcqb-fb.c b/drivers/video/bfin-t350mcqb-fb.c
index 7a50272..3cf7767 100644
--- a/drivers/video/bfin-t350mcqb-fb.c
+++ b/drivers/video/bfin-t350mcqb-fb.c
@@ -192,7 +192,7 @@
{
if (action) {
if (peripheral_request_list(ppi0_req_8, DRIVER_NAME)) {
- printk(KERN_ERR "Requesting Peripherals faild\n");
+ printk(KERN_ERR "Requesting Peripherals failed\n");
return -EFAULT;
}
} else
diff --git a/drivers/video/epson1355fb.c b/drivers/video/epson1355fb.c
index db9713b..a268cbf 100644
--- a/drivers/video/epson1355fb.c
+++ b/drivers/video/epson1355fb.c
@@ -4,7 +4,7 @@
* Epson Research S1D13505 Embedded RAMDAC LCD/CRT Controller
* (previously known as SED1355)
*
- * Cf. http://www.erd.epson.com/vdc/html/S1D13505.html
+ * Cf. http://vdc.epson.com/
*
*
* Copyright (C) Hewlett-Packard Company. All rights reserved.
diff --git a/drivers/video/fbcvt.c b/drivers/video/fbcvt.c
index 7293eac..7cb715d 100644
--- a/drivers/video/fbcvt.c
+++ b/drivers/video/fbcvt.c
@@ -5,7 +5,7 @@
*
* Based from the VESA(TM) Coordinated Video Timing Generator by
* Graham Loveridge April 9, 2003 available at
- * http://www.vesa.org/public/CVT/CVTd6r1.xls
+ * http://www.elo.utfsm.cl/~elo212/docs/CVTd6r1.xls
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file COPYING in the main directory of this archive
diff --git a/drivers/video/metronomefb.c b/drivers/video/metronomefb.c
index 9b3d6e4..63ed3b7 100644
--- a/drivers/video/metronomefb.c
+++ b/drivers/video/metronomefb.c
@@ -10,7 +10,7 @@
* Layout is based on skeletonfb.c by James Simmons and Geert Uytterhoeven.
*
* This work was made possible by help and equipment support from E-Ink
- * Corporation. http://support.eink.com/community
+ * Corporation. http://www.eink.com/
*
* This driver is written to be used with the Metronome display controller.
* It is intended to be architecture independent. A board specific driver
diff --git a/drivers/video/vesafb.c b/drivers/video/vesafb.c
index 090aa1a..6a069d0 100644
--- a/drivers/video/vesafb.c
+++ b/drivers/video/vesafb.c
@@ -253,7 +253,7 @@
size_vmode = vesafb_defined.yres * vesafb_fix.line_length;
/* size_total -- all video memory we have. Used for mtrr
- * entries, ressource allocation and bounds
+ * entries, resource allocation and bounds
* checking. */
size_total = screen_info.lfb_size * 65536;
if (vram_total)
diff --git a/firmware/keyspan_pda/keyspan_pda.S b/firmware/keyspan_pda/keyspan_pda.S
index 418fe69..f3acc19 100644
--- a/firmware/keyspan_pda/keyspan_pda.S
+++ b/firmware/keyspan_pda/keyspan_pda.S
@@ -74,7 +74,7 @@
* recognizes the new device ID and glues it to the real serial driver code.
*
* USEFUL DOCS:
- * EzUSB Technical Reference Manual: <http://www.anchorchips.com>
+ * EzUSB Technical Reference Manual: <http://www.cypress.com/>
* 8051 manuals: everywhere, but try www.dalsemi.com because the EzUSB is
* basically the Dallas enhanced 8051 code. Remember that the EzUSB IO ports
* use totally different registers!
diff --git a/firmware/keyspan_pda/xircom_pgs.S b/firmware/keyspan_pda/xircom_pgs.S
index 05d99dd..0b79bbf 100644
--- a/firmware/keyspan_pda/xircom_pgs.S
+++ b/firmware/keyspan_pda/xircom_pgs.S
@@ -74,7 +74,7 @@
* recognizes the new device ID and glues it to the real serial driver code.
*
* USEFUL DOCS:
- * EzUSB Technical Reference Manual: <http://www.anchorchips.com>
+ * EzUSB Technical Reference Manual: <http://www.cypress.com/>
* 8051 manuals: everywhere, but try www.dalsemi.com because the EzUSB is
* basically the Dallas enhanced 8051 code. Remember that the EzUSB IO ports
* use totally different registers!
diff --git a/fs/ecryptfs/ecryptfs_kernel.h b/fs/ecryptfs/ecryptfs_kernel.h
index 0032a9f..40186b9 100644
--- a/fs/ecryptfs/ecryptfs_kernel.h
+++ b/fs/ecryptfs/ecryptfs_kernel.h
@@ -477,7 +477,7 @@
static inline struct ecryptfs_file_info *
ecryptfs_file_to_private(struct file *file)
{
- return (struct ecryptfs_file_info *)file->private_data;
+ return file->private_data;
}
static inline void
diff --git a/fs/exofs/inode.c b/fs/exofs/inode.c
index 3eadd97..4460275 100644
--- a/fs/exofs/inode.c
+++ b/fs/exofs/inode.c
@@ -511,7 +511,7 @@
pcol_copy = kmalloc(sizeof(*pcol_copy), GFP_KERNEL);
if (!pcol_copy) {
- EXOFS_ERR("write_exec: Faild to kmalloc(pcol)\n");
+ EXOFS_ERR("write_exec: Failed to kmalloc(pcol)\n");
ret = -ENOMEM;
goto err;
}
@@ -527,7 +527,7 @@
ret = exofs_oi_write(oi, ios);
if (unlikely(ret)) {
- EXOFS_ERR("write_exec: exofs_oi_write() Faild\n");
+ EXOFS_ERR("write_exec: exofs_oi_write() Failed\n");
goto err;
}
@@ -628,7 +628,7 @@
/* split the request, next loop will start again */
ret = write_exec(pcol);
if (unlikely(ret)) {
- EXOFS_DBGMSG("write_exec faild => %d", ret);
+ EXOFS_DBGMSG("write_exec failed => %d", ret);
goto fail;
}
@@ -719,7 +719,7 @@
ret = simple_write_begin(file, mapping, pos, len, flags, pagep,
fsdata);
if (ret) {
- EXOFS_DBGMSG("simple_write_begin faild\n");
+ EXOFS_DBGMSG("simple_write_begin failed\n");
goto out;
}
@@ -732,7 +732,7 @@
if (ret) {
/*SetPageError was done by _readpage. Is it ok?*/
unlock_page(page);
- EXOFS_DBGMSG("__readpage_filler faild\n");
+ EXOFS_DBGMSG("__readpage_filler failed\n");
}
}
out:
@@ -1095,7 +1095,7 @@
atomic_dec(&sbi->s_curr_pending);
if (unlikely(ret)) {
- EXOFS_ERR("object=0x%llx creation faild in pid=0x%llx",
+ EXOFS_ERR("object=0x%llx creation failed in pid=0x%llx",
_LLU(exofs_oi_objno(oi)), _LLU(sbi->layout.s_pid));
/*TODO: When FS is corrupted creation can fail, object already
* exist. Get rid of this asynchronous creation, if exist
@@ -1215,7 +1215,7 @@
args = kzalloc(sizeof(*args), GFP_KERNEL);
if (!args) {
- EXOFS_DBGMSG("Faild kzalloc of args\n");
+ EXOFS_DBGMSG("Failed kzalloc of args\n");
return -ENOMEM;
}
diff --git a/fs/exofs/ios.c b/fs/exofs/ios.c
index 6550bf7..f74a2ec 100644
--- a/fs/exofs/ios.c
+++ b/fs/exofs/ios.c
@@ -55,7 +55,7 @@
ret = osd_finalize_request(or, 0, cred, NULL);
if (unlikely(ret)) {
- EXOFS_DBGMSG("Faild to osd_finalize_request() => %d\n", ret);
+ EXOFS_DBGMSG("Failed to osd_finalize_request() => %d\n", ret);
goto out;
}
@@ -79,7 +79,7 @@
*/
ios = kzalloc(exofs_io_state_size(layout->s_numdevs), GFP_KERNEL);
if (unlikely(!ios)) {
- EXOFS_DBGMSG("Faild kzalloc bytes=%d\n",
+ EXOFS_DBGMSG("Failed kzalloc bytes=%d\n",
exofs_io_state_size(layout->s_numdevs));
*pios = NULL;
return -ENOMEM;
@@ -172,7 +172,7 @@
ret = osd_finalize_request(or, 0, ios->cred, NULL);
if (unlikely(ret)) {
- EXOFS_DBGMSG("Faild to osd_finalize_request() => %d\n",
+ EXOFS_DBGMSG("Failed to osd_finalize_request() => %d\n",
ret);
return ret;
}
@@ -361,7 +361,7 @@
per_dev->bio = bio_kmalloc(GFP_KERNEL, bio_size);
if (unlikely(!per_dev->bio)) {
- EXOFS_DBGMSG("Faild to allocate BIO size=%u\n",
+ EXOFS_DBGMSG("Failed to allocate BIO size=%u\n",
bio_size);
return -ENOMEM;
}
@@ -564,7 +564,7 @@
master_dev->bio->bi_max_vecs);
if (unlikely(!bio)) {
EXOFS_DBGMSG(
- "Faild to allocate BIO size=%u\n",
+ "Failed to allocate BIO size=%u\n",
master_dev->bio->bi_max_vecs);
ret = -ENOMEM;
goto out;
diff --git a/fs/ext2/inode.c b/fs/ext2/inode.c
index 940c961..533699c 100644
--- a/fs/ext2/inode.c
+++ b/fs/ext2/inode.c
@@ -458,7 +458,7 @@
* the same format as ext2_get_branch() would do. We are calling it after
* we had read the existing part of chain and partial points to the last
* triple of that (one with zero ->key). Upon the exit we have the same
- * picture as after the successful ext2_get_block(), excpet that in one
+ * picture as after the successful ext2_get_block(), except that in one
* place chain is disconnected - *branch->p is still zero (we did not
* set the last link), but branch->key contains the number that should
* be placed into *branch->p to fill that gap.
@@ -662,7 +662,7 @@
mutex_lock(&ei->truncate_mutex);
/*
* If the indirect block is missing while we are reading
- * the chain(ext3_get_branch() returns -EAGAIN err), or
+ * the chain(ext2_get_branch() returns -EAGAIN err), or
* if the chain has been changed after we grab the semaphore,
* (either because another process truncated this branch, or
* another get_block allocated this branch) re-grab the chain to see if
diff --git a/fs/hostfs/hostfs.h b/fs/hostfs/hostfs.h
index 6bbd75c..7c232c1 100644
--- a/fs/hostfs/hostfs.h
+++ b/fs/hostfs/hostfs.h
@@ -28,12 +28,7 @@
* #define ATTR_KILL_SUID 2048
* #define ATTR_KILL_SGID 4096
*
- * and this is because they were added in 2.5 development in this patch:
- *
- * http://linux.bkbits.net:8080/linux-2.5/
- * cset@3caf4a12k4XgDzK7wyK-TGpSZ9u2Ww?nav=index.html
- * |src/.|src/include|src/include/linux|related/include/linux/fs.h
- *
+ * and this is because they were added in 2.5 development.
* Actually, they are not needed by most ->setattr() methods - they are set by
* callers of notify_change() to notify that the setuid/setgid bits must be
* dropped.
diff --git a/fs/jfs/jfs_logmgr.c b/fs/jfs/jfs_logmgr.c
index c51af2a..e1b8493 100644
--- a/fs/jfs/jfs_logmgr.c
+++ b/fs/jfs/jfs_logmgr.c
@@ -1010,15 +1010,13 @@
* option 2 - shutdown file systems
* associated with log ?
* option 3 - extend log ?
- */
- /*
* option 4 - second chance
*
* mark log wrapped, and continue.
* when all active transactions are completed,
- * mark log vaild for recovery.
+ * mark log valid for recovery.
* if crashed during invalid state, log state
- * implies invald log, forcing fsck().
+ * implies invalid log, forcing fsck().
*/
/* mark log state log wrap in log superblock */
/* log->state = LOGWRAP; */
diff --git a/fs/jfs/jfs_mount.c b/fs/jfs/jfs_mount.c
index 7b698f2..9895595 100644
--- a/fs/jfs/jfs_mount.c
+++ b/fs/jfs/jfs_mount.c
@@ -97,7 +97,7 @@
ipaimap = diReadSpecial(sb, AGGREGATE_I, 0);
if (ipaimap == NULL) {
- jfs_err("jfs_mount: Faild to read AGGREGATE_I");
+ jfs_err("jfs_mount: Failed to read AGGREGATE_I");
rc = -EIO;
goto errout20;
}
@@ -148,7 +148,7 @@
if ((sbi->mntflag & JFS_BAD_SAIT) == 0) {
ipaimap2 = diReadSpecial(sb, AGGREGATE_I, 1);
if (!ipaimap2) {
- jfs_err("jfs_mount: Faild to read AGGREGATE_I");
+ jfs_err("jfs_mount: Failed to read AGGREGATE_I");
rc = -EIO;
goto errout35;
}
diff --git a/fs/ocfs2/cluster/tcp_internal.h b/fs/ocfs2/cluster/tcp_internal.h
index 96fa7eb..15fdbdf 100644
--- a/fs/ocfs2/cluster/tcp_internal.h
+++ b/fs/ocfs2/cluster/tcp_internal.h
@@ -129,7 +129,7 @@
struct o2net_sock_container {
struct kref sc_kref;
- /* the next two are vaild for the life time of the sc */
+ /* the next two are valid for the life time of the sc */
struct socket *sc_sock;
struct o2nm_node *sc_node;
diff --git a/fs/partitions/ldm.c b/fs/partitions/ldm.c
index 5bf8a04..789c625 100644
--- a/fs/partitions/ldm.c
+++ b/fs/partitions/ldm.c
@@ -5,7 +5,7 @@
* Copyright (c) 2001-2007 Anton Altaparmakov
* Copyright (C) 2001,2002 Jakob Kemi <jakob.kemi@telia.com>
*
- * Documentation is available at http://www.linux-ntfs.org/content/view/19/37/
+ * Documentation is available at http://www.linux-ntfs.org/doku.php?id=downloads
*
* This program is free software; you can redistribute it and/or modify it under
* the terms of the GNU General Public License as published by the Free Software
diff --git a/fs/partitions/ldm.h b/fs/partitions/ldm.h
index d1fb50b..374242c 100644
--- a/fs/partitions/ldm.h
+++ b/fs/partitions/ldm.h
@@ -5,7 +5,7 @@
* Copyright (c) 2001-2007 Anton Altaparmakov
* Copyright (C) 2001,2002 Jakob Kemi <jakob.kemi@telia.com>
*
- * Documentation is available at http://www.linux-ntfs.org/content/view/19/37/
+ * Documentation is available at http://www.linux-ntfs.org/doku.php?id=downloads
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
diff --git a/fs/reiserfs/Kconfig b/fs/reiserfs/Kconfig
index 513f431..7cd4666 100644
--- a/fs/reiserfs/Kconfig
+++ b/fs/reiserfs/Kconfig
@@ -10,7 +10,8 @@
In general, ReiserFS is as fast as ext2, but is very efficient with
large directories and small files. Additional patches are needed
- for NFS and quotas, please see <http://www.namesys.com/> for links.
+ for NFS and quotas, please see
+ <https://reiser4.wiki.kernel.org/index.php/Main_Page> for links.
It is more easily extended to have features currently found in
database and keyword search systems than block allocation based file
@@ -18,7 +19,8 @@
plugins consistent with our motto ``It takes more than a license to
make source code open.''
- Read <http://www.namesys.com/> to learn more about reiserfs.
+ Read <https://reiser4.wiki.kernel.org/index.php/Main_Page>
+ to learn more about reiserfs.
Sponsored by Threshold Networks, Emusic.com, and Bigstorage.com.
diff --git a/fs/reiserfs/README b/fs/reiserfs/README
index 14e8c9d..e2f7a26 100644
--- a/fs/reiserfs/README
+++ b/fs/reiserfs/README
@@ -43,7 +43,7 @@
[END LICENSING]
Reiserfs is a file system based on balanced tree algorithms, which is
-described at http://devlinux.com/namesys.
+described at https://reiser4.wiki.kernel.org/index.php/Main_Page
Stop reading here. Go there, then return.
diff --git a/fs/seq_file.c b/fs/seq_file.c
index e1f437b..0e7cb13 100644
--- a/fs/seq_file.c
+++ b/fs/seq_file.c
@@ -131,7 +131,7 @@
*/
ssize_t seq_read(struct file *file, char __user *buf, size_t size, loff_t *ppos)
{
- struct seq_file *m = (struct seq_file *)file->private_data;
+ struct seq_file *m = file->private_data;
size_t copied = 0;
loff_t pos;
size_t n;
@@ -280,7 +280,7 @@
*/
loff_t seq_lseek(struct file *file, loff_t offset, int origin)
{
- struct seq_file *m = (struct seq_file *)file->private_data;
+ struct seq_file *m = file->private_data;
loff_t retval = -EINVAL;
mutex_lock(&m->lock);
@@ -324,7 +324,7 @@
*/
int seq_release(struct inode *inode, struct file *file)
{
- struct seq_file *m = (struct seq_file *)file->private_data;
+ struct seq_file *m = file->private_data;
kfree(m->buf);
kfree(m);
return 0;
diff --git a/include/crypto/gf128mul.h b/include/crypto/gf128mul.h
index 4086b8e..da2530e 100644
--- a/include/crypto/gf128mul.h
+++ b/include/crypto/gf128mul.h
@@ -54,8 +54,8 @@
/* Comment by Rik:
*
- * For some background on GF(2^128) see for example: http://-
- * csrc.nist.gov/CryptoToolkit/modes/proposedmodes/gcm/gcm-revised-spec.pdf
+ * For some background on GF(2^128) see for example:
+ * http://csrc.nist.gov/groups/ST/toolkit/BCM/documents/proposedmodes/gcm/gcm-revised-spec.pdf
*
* The elements of GF(2^128) := GF(2)[X]/(X^128-X^7-X^2-X^1-1) can
* be mapped to computer memory in a variety of ways. Let's examine
diff --git a/include/linux/fdreg.h b/include/linux/fdreg.h
index c2eeb63..61ce641 100644
--- a/include/linux/fdreg.h
+++ b/include/linux/fdreg.h
@@ -89,7 +89,7 @@
/* the following commands are new in the 82078. They are not used in the
* floppy driver, except the first three. These commands may be useful for apps
* which use the FDRAWCMD interface. For doc, get the 82078 spec sheets at
- * http://www-techdoc.intel.com/docs/periph/fd_contr/datasheets/ */
+ * http://www.intel.com/design/archives/periphrl/docs/29046803.htm */
#define FD_PARTID 0x18 /* part id ("extended" version cmd) */
#define FD_SAVE 0x2e /* save fdc regs for later restore */
diff --git a/include/linux/idr.h b/include/linux/idr.h
index cdb715e..928ae71 100644
--- a/include/linux/idr.h
+++ b/include/linux/idr.h
@@ -117,10 +117,13 @@
/*
* IDA - IDR based id allocator, use when translation from id to
* pointer isn't necessary.
+ *
+ * IDA_BITMAP_LONGS is calculated to be one less to accommodate
+ * ida_bitmap->nr_busy so that the whole struct fits in 128 bytes.
*/
#define IDA_CHUNK_SIZE 128 /* 128 bytes per chunk */
-#define IDA_BITMAP_LONGS (128 / sizeof(long) - 1)
-#define IDA_BITMAP_BITS (IDA_BITMAP_LONGS * sizeof(long) * 8)
+#define IDA_BITMAP_LONGS (IDA_CHUNK_SIZE / sizeof(long) - 1)
+#define IDA_BITMAP_BITS (IDA_BITMAP_LONGS * sizeof(long) * 8)
struct ida_bitmap {
long nr_busy;
diff --git a/include/linux/if_infiniband.h b/include/linux/if_infiniband.h
index 3e659ec..7d958475 100644
--- a/include/linux/if_infiniband.h
+++ b/include/linux/if_infiniband.h
@@ -5,7 +5,7 @@
* <http://www.fsf.org/copyleft/gpl.html>, or the OpenIB.org BSD
* license, available in the LICENSE.TXT file accompanying this
* software. These details are also available at
- * <http://openib.org/license.html>.
+ * <http://www.openfabrics.org/software_license.htm>.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
diff --git a/include/linux/jhash.h b/include/linux/jhash.h
index 2a2f99f..ced1159 100644
--- a/include/linux/jhash.h
+++ b/include/linux/jhash.h
@@ -116,7 +116,7 @@
/* A special ultra-optimized versions that knows they are hashing exactly
* 3, 2 or 1 word(s).
*
- * NOTE: In partilar the "c += length; __jhash_mix(a,b,c);" normally
+ * NOTE: In particular the "c += length; __jhash_mix(a,b,c);" normally
* done at the end is not done here.
*/
static inline u32 jhash_3words(u32 a, u32 b, u32 c, u32 initval)
diff --git a/include/linux/n_r3964.h b/include/linux/n_r3964.h
index de24af7..54b8e0d 100644
--- a/include/linux/n_r3964.h
+++ b/include/linux/n_r3964.h
@@ -4,7 +4,6 @@
* Copyright by
* Philips Automation Projects
* Kassel (Germany)
- * http://www.pap-philips.de
* -----------------------------------------------------------
* This software may be used and distributed according to the terms of
* the GNU General Public License, incorporated herein by reference.
diff --git a/include/video/vga.h b/include/video/vga.h
index b49a512..2b8691f 100644
--- a/include/video/vga.h
+++ b/include/video/vga.h
@@ -5,7 +5,7 @@
*
* Copyright history from vga16fb.c:
* Copyright 1999 Ben Pfaff and Petr Vandrovec
- * Based on VGA info at http://www.goodnet.com/~tinara/FreeVGA/home.htm
+ * Based on VGA info at http://www.osdever.net/FreeVGA/home.htm
* Based on VESA framebuffer (c) 1998 Gerd Knorr
*
* This file is subject to the terms and conditions of the GNU General
diff --git a/init/Kconfig b/init/Kconfig
index fdfd97e..3ae8ffe 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -186,7 +186,7 @@
depends on HAVE_KERNEL_LZO
help
Its compression ratio is the poorest among the 4. The kernel
- size is about about 10% bigger than gzip; however its speed
+ size is about 10% bigger than gzip; however its speed
(both compression and decompression) is the fastest.
endchoice
diff --git a/kernel/pm_qos_params.c b/kernel/pm_qos_params.c
index a96b850..c7a8f45 100644
--- a/kernel/pm_qos_params.c
+++ b/kernel/pm_qos_params.c
@@ -399,7 +399,7 @@
} else
return -EINVAL;
- pm_qos_req = (struct pm_qos_request_list *)filp->private_data;
+ pm_qos_req = filp->private_data;
pm_qos_update_request(pm_qos_req, value);
return count;
diff --git a/kernel/trace/trace_kprobe.c b/kernel/trace/trace_kprobe.c
index 544301d..b8d2852 100644
--- a/kernel/trace/trace_kprobe.c
+++ b/kernel/trace/trace_kprobe.c
@@ -648,7 +648,7 @@
}
ret = register_probe_event(tp);
if (ret) {
- pr_warning("Faild to register probe event(%d)\n", ret);
+ pr_warning("Failed to register probe event(%d)\n", ret);
goto end;
}
diff --git a/lib/idr.c b/lib/idr.c
index 7f1a4f0..5e0966b 100644
--- a/lib/idr.c
+++ b/lib/idr.c
@@ -284,7 +284,7 @@
* idr_get_new_above - allocate new idr entry above or equal to a start id
* @idp: idr handle
* @ptr: pointer you want associated with the id
- * @start_id: id to start search at
+ * @starting_id: id to start search at
* @id: pointer to the allocated handle
*
* This is the allocate id function. It should be called with any
@@ -479,7 +479,7 @@
/**
* idr_destroy - release all cached layers within an idr tree
- * idp: idr handle
+ * @idp: idr handle
*/
void idr_destroy(struct idr *idp)
{
@@ -586,10 +586,11 @@
/**
* idr_get_next - lookup next object of id to given id.
* @idp: idr handle
- * @id: pointer to lookup key
+ * @nextidp: pointer to lookup key
*
* Returns pointer to registered object with id, which is next number to
- * given id.
+ * given id. After being looked up, *@nextidp will be updated for the next
+ * iteration.
*/
void *idr_get_next(struct idr *idp, int *nextidp)
@@ -758,7 +759,7 @@
/**
* ida_get_new_above - allocate new ID above or equal to a start id
* @ida: ida handle
- * @staring_id: id to start search at
+ * @starting_id: id to start search at
* @p_id: pointer to the allocated handle
*
* Allocate new ID above or equal to @ida. It should be called with
@@ -912,7 +913,7 @@
/**
* ida_destroy - release all cached layers within an ida tree
- * ida: ida handle
+ * @ida: ida handle
*/
void ida_destroy(struct ida *ida)
{
diff --git a/mm/percpu.c b/mm/percpu.c
index 6fc9015..efe8168 100644
--- a/mm/percpu.c
+++ b/mm/percpu.c
@@ -31,7 +31,7 @@
* as small as 4 bytes. The allocator organizes chunks into lists
* according to free size and tries to allocate from the fullest one.
* Each chunk keeps the maximum contiguous area size hint which is
- * guaranteed to be eqaul to or larger than the maximum contiguous
+ * guaranteed to be equal to or larger than the maximum contiguous
* area in the chunk. This helps the allocator not to iterate the
* chunk maps unnecessarily.
*
diff --git a/mm/vmscan.c b/mm/vmscan.c
index c5dfabf..b94c946 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -79,8 +79,8 @@
int order;
/*
- * Intend to reclaim enough contenious memory rather than to reclaim
- * enough amount memory. I.e, it's the mode for high order allocation.
+ * Intend to reclaim enough continuous memory rather than reclaim
+ * enough amount of memory. i.e, mode for high order allocation.
*/
bool lumpy_reclaim_mode;
diff --git a/net/ax25/Kconfig b/net/ax25/Kconfig
index 2a72aa9..705e53e 100644
--- a/net/ax25/Kconfig
+++ b/net/ax25/Kconfig
@@ -7,7 +7,7 @@
bool "Amateur Radio support"
help
If you want to connect your Linux box to an amateur radio, answer Y
- here. You want to read <http://www.tapr.org/tapr/html/pkthome.html>
+ here. You want to read <http://www.tapr.org/>
and more specifically about AX.25 on Linux
<http://www.linux-ax25.org/>.
@@ -42,7 +42,7 @@
check out the file <file:Documentation/networking/ax25.txt> in the
kernel source. More information about digital amateur radio in
general is on the WWW at
- <http://www.tapr.org/tapr/html/pkthome.html>.
+ <http://www.tapr.org/>.
To compile this driver as a module, choose M here: the
module will be called ax25.
@@ -89,7 +89,7 @@
<http://www.linux-ax25.org>. You also might want to check out the
file <file:Documentation/networking/ax25.txt>. More information about
digital amateur radio in general is on the WWW at
- <http://www.tapr.org/tapr/html/pkthome.html>.
+ <http://www.tapr.org/>.
To compile this driver as a module, choose M here: the
module will be called netrom.
@@ -108,7 +108,7 @@
<http://www.linux-ax25.org>. You also might want to check out the
file <file:Documentation/networking/ax25.txt>. More information about
digital amateur radio in general is on the WWW at
- <http://www.tapr.org/tapr/html/pkthome.html>.
+ <http://www.tapr.org/>.
To compile this driver as a module, choose M here: the
module will be called rose.
diff --git a/net/ipv4/Kconfig b/net/ipv4/Kconfig
index e848e6c..9e95d7f 100644
--- a/net/ipv4/Kconfig
+++ b/net/ipv4/Kconfig
@@ -84,7 +84,7 @@
An experimental study of compression methods for dynamic tries
Stefan Nilsson and Matti Tikkanen. Algorithmica, 33(1):19-33, 2002.
- http://www.nada.kth.se/~snilsson/public/papers/dyntrie2/
+ <http://www.csc.kth.se/~snilsson/software/dyntrie2/>
endchoice
@@ -562,7 +562,7 @@
distinguishing to circumvent the difficult judgment of the packet loss
type. TCP Veno cuts down less congestion window in response to random
loss packets.
- See http://www.ntu.edu.sg/home5/ZHOU0022/papers/CPFu03a.pdf
+ See <http://ieeexplore.ieee.org/xpl/freeabs_all.jsp?arnumber=1177186>
config TCP_CONG_YEAH
tristate "YeAH TCP"
diff --git a/net/ipv4/cipso_ipv4.c b/net/ipv4/cipso_ipv4.c
index 3a92a76..094e150 100644
--- a/net/ipv4/cipso_ipv4.c
+++ b/net/ipv4/cipso_ipv4.c
@@ -9,7 +9,7 @@
*
* The CIPSO draft specification can be found in the kernel's Documentation
* directory as well as the following URL:
- * http://netlabel.sourceforge.net/files/draft-ietf-cipso-ipsecurity-01.txt
+ * http://tools.ietf.org/id/draft-ietf-cipso-ipsecurity-01.txt
* The FIPS-188 specification can be found at the following URL:
* http://www.itl.nist.gov/fipspubs/fip188.htm
*
diff --git a/net/ipv4/fib_trie.c b/net/ipv4/fib_trie.c
index cd5e13a..b144508 100644
--- a/net/ipv4/fib_trie.c
+++ b/net/ipv4/fib_trie.c
@@ -16,7 +16,7 @@
*
* An experimental study of compression methods for dynamic tries
* Stefan Nilsson and Matti Tikkanen. Algorithmica, 33(1):19-33, 2002.
- * http://www.nada.kth.se/~snilsson/public/papers/dyntrie2/
+ * http://www.csc.kth.se/~snilsson/software/dyntrie2/
*
*
* IP-address lookup using LC-tries. Stefan Nilsson and Gunnar Karlsson
diff --git a/net/ipv4/netfilter/Kconfig b/net/ipv4/netfilter/Kconfig
index 8e33506..babd1a2 100644
--- a/net/ipv4/netfilter/Kconfig
+++ b/net/ipv4/netfilter/Kconfig
@@ -147,7 +147,7 @@
which can only be viewed through syslog.
The appropriate userspace logging daemon (ulogd) may be obtained from
- <http://www.gnumonks.org/projects/ulogd/>
+ <http://www.netfilter.org/projects/ulogd/index.html>
To compile it as a module, choose M here. If unsure, say N.
diff --git a/net/ipv4/tcp_illinois.c b/net/ipv4/tcp_illinois.c
index 1eba160..00ca688d 100644
--- a/net/ipv4/tcp_illinois.c
+++ b/net/ipv4/tcp_illinois.c
@@ -6,7 +6,7 @@
* The algorithm is described in:
* "TCP-Illinois: A Loss and Delay-Based Congestion Control Algorithm
* for High-Speed Networks"
- * http://www.ews.uiuc.edu/~shaoliu/papersandslides/liubassri06perf.pdf
+ * http://www.ifp.illinois.edu/~srikant/Papers/liubassri06perf.pdf
*
* Implemented from description in paper and ns-2 simulation.
* Copyright (C) 2007 Stephen Hemminger <shemminger@linux-foundation.org>
diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c
index ee0df48..3357f69 100644
--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -428,10 +428,10 @@
*
* The algorithm for RTT estimation w/o timestamps is based on
* Dynamic Right-Sizing (DRS) by Wu Feng and Mike Fisk of LANL.
- * <http://www.lanl.gov/radiant/website/pubs/drs/lacsi2001.ps>
+ * <http://public.lanl.gov/radiant/pubs.html#DRS>
*
* More detail on this code can be found at
- * <http://www.psc.edu/~jheffner/senior_thesis.ps>,
+ * <http://staff.psc.edu/jheffner/>,
* though this reference is out of date. A new paper
* is pending.
*/
diff --git a/net/ipv4/tcp_veno.c b/net/ipv4/tcp_veno.c
index b612acf..38bc0b5 100644
--- a/net/ipv4/tcp_veno.c
+++ b/net/ipv4/tcp_veno.c
@@ -6,7 +6,7 @@
* "TCP Veno: TCP Enhancement for Transmission over Wireless Access Networks."
* IEEE Journal on Selected Areas in Communication,
* Feb. 2003.
- * See http://www.ntu.edu.sg/home5/ZHOU0022/papers/CPFu03a.pdf
+ * See http://www.ie.cuhk.edu.hk/fileadmin/staff_upload/soung/Journal/J3.pdf
*/
#include <linux/mm.h>
diff --git a/net/irda/irnet/irnet_ppp.c b/net/irda/irnet/irnet_ppp.c
index 0993bd4..7fa8637 100644
--- a/net/irda/irnet/irnet_ppp.c
+++ b/net/irda/irnet/irnet_ppp.c
@@ -664,7 +664,7 @@
if((val == N_SYNC_PPP) || (val == N_PPP))
{
DEBUG(FS_INFO, "Entering PPP discipline.\n");
- /* PPP channel setup (ap->chan in configued in dev_irnet_open())*/
+ /* PPP channel setup (ap->chan in configured in dev_irnet_open())*/
if (mutex_lock_interruptible(&ap->lock))
return -EINTR;
diff --git a/net/mac80211/mesh.h b/net/mac80211/mesh.h
index ebd3f1d..58e7411 100644
--- a/net/mac80211/mesh.h
+++ b/net/mac80211/mesh.h
@@ -115,7 +115,7 @@
* @hash_rnd: random value used for hash computations
* @entries: number of entries in the table
* @free_node: function to free nodes of the table
- * @copy_node: fuction to copy nodes of the table
+ * @copy_node: function to copy nodes of the table
* @size_order: determines size of the table, there will be 2^size_order hash
* buckets
* @mean_chain_len: maximum average length for the hash buckets' list, if it is
diff --git a/net/netfilter/nf_conntrack_proto_tcp.c b/net/netfilter/nf_conntrack_proto_tcp.c
index c4c885d..3fb2b73 100644
--- a/net/netfilter/nf_conntrack_proto_tcp.c
+++ b/net/netfilter/nf_conntrack_proto_tcp.c
@@ -329,8 +329,8 @@
/* TCP connection tracking based on 'Real Stateful TCP Packet Filtering
in IP Filter' by Guido van Rooij.
- http://www.nluug.nl/events/sane2000/papers.html
- http://www.iae.nl/users/guido/papers/tcp_filtering.ps.gz
+ http://www.sane.nl/events/sane2000/papers.html
+ http://www.darkart.com/mirrors/www.obfuscation.org/ipf/
The boundaries and the conditions are changed according to RFC793:
the packet must intersect the window (i.e. segments may be
diff --git a/net/sunrpc/rpc_pipe.c b/net/sunrpc/rpc_pipe.c
index 28bcd52..52f2524 100644
--- a/net/sunrpc/rpc_pipe.c
+++ b/net/sunrpc/rpc_pipe.c
@@ -203,7 +203,7 @@
mutex_lock(&inode->i_mutex);
if (rpci->ops == NULL)
goto out;
- msg = (struct rpc_pipe_msg *)filp->private_data;
+ msg = filp->private_data;
if (msg != NULL) {
spin_lock(&inode->i_lock);
msg->errno = -EAGAIN;
@@ -325,7 +325,7 @@
len = rpci->pipelen;
if (filp->private_data) {
struct rpc_pipe_msg *msg;
- msg = (struct rpc_pipe_msg *)filp->private_data;
+ msg = filp->private_data;
len += msg->len - msg->copied;
}
spin_unlock(&inode->i_lock);
diff --git a/net/wanrouter/wanmain.c b/net/wanrouter/wanmain.c
index 2bf2340..74944a2 100644
--- a/net/wanrouter/wanmain.c
+++ b/net/wanrouter/wanmain.c
@@ -471,7 +471,7 @@
data = vmalloc(conf->data_size);
if (!data) {
printk(KERN_INFO
- "%s: ERROR, Faild allocate kernel memory !\n",
+ "%s: ERROR, Failed allocate kernel memory !\n",
wandev->name);
kfree(conf);
return -ENOBUFS;
@@ -481,7 +481,7 @@
err = wandev->setup(wandev, conf);
} else {
printk(KERN_INFO
- "%s: ERROR, Faild to copy from user data !\n",
+ "%s: ERROR, Failed to copy from user data !\n",
wandev->name);
err = -EFAULT;
}
diff --git a/sound/oss/ac97_codec.c b/sound/oss/ac97_codec.c
index 456a1b4..854c303 100644
--- a/sound/oss/ac97_codec.c
+++ b/sound/oss/ac97_codec.c
@@ -21,11 +21,8 @@
*
**************************************************************************
*
- * The Intel Audio Codec '97 specification is available at the Intel
- * audio homepage: http://developer.intel.com/ial/scalableplatforms/audio/
- *
- * The specification itself is currently available at:
- * ftp://download.intel.com/ial/scalableplatforms/ac97r22.pdf
+ * The Intel Audio Codec '97 specification is available at:
+ * http://download.intel.com/support/motherboards/desktop/sb/ac97_r23.pdf
*
**************************************************************************
*
diff --git a/sound/pci/ens1370.c b/sound/pci/ens1370.c
index c7fba53..537cfba 100644
--- a/sound/pci/ens1370.c
+++ b/sound/pci/ens1370.c
@@ -22,7 +22,7 @@
/* Power-Management-Code ( CONFIG_PM )
* for ens1371 only ( FIXME )
* derived from cs4281.c, atiixp.c and via82xx.c
- * using http://www.alsa-project.org/~iwai/writing-an-alsa-driver/c1540.htm
+ * using http://www.alsa-project.org/~tiwai/writing-an-alsa-driver/
* by Kurt J. Bosch
*/
diff --git a/sound/pci/intel8x0.c b/sound/pci/intel8x0.c
index 4677492..400f9eb 100644
--- a/sound/pci/intel8x0.c
+++ b/sound/pci/intel8x0.c
@@ -716,7 +716,7 @@
* Intel 82443MX running a 100MHz processor system bus has a hardware bug,
* which aborts PCI busmaster for audio transfer. A workaround is to set
* the pages as non-cached. For details, see the errata in
- * http://www.intel.com/design/chipsets/specupdt/245051.htm
+ * http://download.intel.com/design/chipsets/specupdt/24505108.pdf
*/
static void fill_nocache(void *buf, int size, int nocache)
{
diff --git a/sound/soc/s3c24xx/neo1973_gta02_wm8753.c b/sound/soc/s3c24xx/neo1973_gta02_wm8753.c
index 209c259..4719558 100644
--- a/sound/soc/s3c24xx/neo1973_gta02_wm8753.c
+++ b/sound/soc/s3c24xx/neo1973_gta02_wm8753.c
@@ -182,7 +182,7 @@
if (ret < 0)
return ret;
- /* configue and enable PLL for 12.288MHz output */
+ /* configure and enable PLL for 12.288MHz output */
ret = snd_soc_dai_set_pll(codec_dai, WM8753_PLL2, 0,
iis_clkrate / 4, 12288000);
if (ret < 0)
diff --git a/sound/soc/s3c24xx/neo1973_wm8753.c b/sound/soc/s3c24xx/neo1973_wm8753.c
index 0cb4f86..4ac6209 100644
--- a/sound/soc/s3c24xx/neo1973_wm8753.c
+++ b/sound/soc/s3c24xx/neo1973_wm8753.c
@@ -201,7 +201,7 @@
if (ret < 0)
return ret;
- /* configue and enable PLL for 12.288MHz output */
+ /* configure and enable PLL for 12.288MHz output */
ret = snd_soc_dai_set_pll(codec_dai, WM8753_PLL2, 0,
iis_clkrate / 4, 12288000);
if (ret < 0)
diff --git a/usr/Kconfig b/usr/Kconfig
index e2721f5..c2c7fe2 100644
--- a/usr/Kconfig
+++ b/usr/Kconfig
@@ -144,7 +144,7 @@
depends on RD_LZO
help
Its compression ratio is the poorest among the four. The kernel
- size is about about 10% bigger than gzip; however its speed
+ size is about 10% bigger than gzip; however its speed
(both compression and decompression) is the fastest.
endchoice