Add in TimerDxe
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@2791 6f19259b-4bc3-4df7-8a09-765794883524
diff --git a/Nt32Pkg/TimerDxe/CommonHeader.h b/Nt32Pkg/TimerDxe/CommonHeader.h
new file mode 100644
index 0000000..e497b7c
--- /dev/null
+++ b/Nt32Pkg/TimerDxe/CommonHeader.h
@@ -0,0 +1,37 @@
+/**@file
+ Common header file shared by all source files.
+
+ This file includes package header files, library classes and protocol, PPI & GUID definitions.
+
+ Copyright (c) 2006 - 2007, Intel Corporation
+ All rights reserved. This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+**/
+
+#ifndef __COMMON_HEADER_H_
+#define __COMMON_HEADER_H_
+
+
+//
+// The package level header files this module uses
+//
+#include <PiDxe.h>
+#include <WinNtDxe.h>
+//
+// The protocols, PPI and GUID defintions for this module
+//
+#include <Protocol/Timer.h>
+#include <Protocol/Cpu.h>
+//
+// The Library classes this module consumes
+//
+#include <Library/DebugLib.h>
+#include <Library/UefiDriverEntryPoint.h>
+#include <Library/WinNtLib.h>
+#include <Library/UefiBootServicesTableLib.h>
+
+#endif
diff --git a/Nt32Pkg/TimerDxe/Timer.c b/Nt32Pkg/TimerDxe/Timer.c
new file mode 100644
index 0000000..363f104
--- /dev/null
+++ b/Nt32Pkg/TimerDxe/Timer.c
@@ -0,0 +1,602 @@
+/*++
+
+Copyright (c) 2006, Intel Corporation
+All rights reserved. This program and the accompanying materials
+are licensed and made available under the terms and conditions of the BSD License
+which accompanies this distribution. The full text of the license may be found at
+http://opensource.org/licenses/bsd-license.php
+
+THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+Module Name:
+
+ Timer.c
+
+Abstract:
+
+ NT Emulation Timer Architectural Protocol Driver as defined in DXE CIS
+
+ This Timer module uses an NT Thread to simulate the timer-tick driven
+ timer service. In the future, the Thread creation should possibly be
+ abstracted by the CPU architectural protocol
+
+--*/
+
+//
+// Include common header file for this module.
+//
+#include "CommonHeader.h"
+
+#include "Timer.h"
+
+//
+// Pointer to the CPU Architectural Protocol instance
+//
+EFI_CPU_ARCH_PROTOCOL *mCpu;
+
+//
+// The Timer Architectural Protocol that this driver produces
+//
+EFI_TIMER_ARCH_PROTOCOL mTimer = {
+ WinNtTimerDriverRegisterHandler,
+ WinNtTimerDriverSetTimerPeriod,
+ WinNtTimerDriverGetTimerPeriod,
+ WinNtTimerDriverGenerateSoftInterrupt
+};
+
+//
+// Define a global that we can use to shut down the NT timer thread when
+// the timer is canceled.
+//
+BOOLEAN mCancelTimerThread = FALSE;
+
+//
+// The notification function to call on every timer interrupt
+//
+EFI_TIMER_NOTIFY mTimerNotifyFunction = NULL;
+
+//
+// The current period of the timer interrupt
+//
+UINT64 mTimerPeriod;
+
+//
+// The thread handle for this driver
+//
+HANDLE mNtMainThreadHandle;
+
+//
+// The timer value from the last timer interrupt
+//
+UINT32 mNtLastTick;
+
+//
+// Critical section used to update varibles shared between the main thread and
+// the timer interrupt thread.
+//
+CRITICAL_SECTION mNtCriticalSection;
+
+//
+// Worker Functions
+//
+UINT mMMTimerThreadID = 0;
+
+VOID
+CALLBACK
+MMTimerThread (
+ UINT wTimerID,
+ UINT msg,
+ DWORD dwUser,
+ DWORD dw1,
+ DWORD dw2
+ )
+/*++
+
+Routine Description:
+
+ TODO: Add function description
+
+Arguments:
+
+ wTimerID - TODO: add argument description
+ msg - TODO: add argument description
+ dwUser - TODO: add argument description
+ dw1 - TODO: add argument description
+ dw2 - TODO: add argument description
+
+Returns:
+
+ TODO: add return values
+
+--*/
+{
+ EFI_TPL OriginalTPL;
+ UINT32 CurrentTick;
+ UINT32 Delta;
+ EFI_TIMER_NOTIFY CallbackFunction;
+ BOOLEAN InterruptState;
+
+ if (!mCancelTimerThread) {
+
+ //
+ // Suspend the main thread until we are done
+ //
+
+ gWinNt->SuspendThread (mNtMainThreadHandle);
+
+ //
+ // If the timer thread is being canceled, then bail immediately.
+ // We check again here because there's a small window of time from when
+ // this thread was kicked off and when we suspended the main thread above.
+ //
+ if (mCancelTimerThread) {
+ gWinNt->ResumeThread (mNtMainThreadHandle);
+ gWinNt->timeKillEvent (wTimerID);
+ mMMTimerThreadID = 0;
+ return ;
+ }
+
+ mCpu->GetInterruptState (mCpu, &InterruptState);
+ while (!InterruptState) {
+ //
+ // Resume the main thread
+ //
+ gWinNt->ResumeThread (mNtMainThreadHandle);
+
+ //
+ // Wait for interrupts to be enabled.
+ //
+ mCpu->GetInterruptState (mCpu, &InterruptState);
+ while (!InterruptState) {
+ gWinNt->Sleep (0);
+ mCpu->GetInterruptState (mCpu, &InterruptState);
+ }
+
+ //
+ // Suspend the main thread until we are done
+ //
+ gWinNt->SuspendThread (mNtMainThreadHandle);
+ mCpu->GetInterruptState (mCpu, &InterruptState);
+ }
+
+ //
+ // Get the current system tick
+ //
+ CurrentTick = gWinNt->GetTickCount ();
+ Delta = CurrentTick - mNtLastTick;
+ mNtLastTick = CurrentTick;
+
+ //
+ // If delay was more then 1 second, ignore it (probably debugging case)
+ //
+ if (Delta < 1000) {
+
+ OriginalTPL = gBS->RaiseTPL (TPL_HIGH_LEVEL);
+
+ //
+ // Inform the firmware of an "timer interrupt". The time
+ // expired since the last call is 10,000 times the number
+ // of ms. (or 100ns units)
+ //
+ gWinNt->EnterCriticalSection (&mNtCriticalSection);
+ CallbackFunction = mTimerNotifyFunction;
+ gWinNt->LeaveCriticalSection (&mNtCriticalSection);
+
+ //
+ // Only invoke the callback function if a Non-NULL handler has been
+ // registered. Assume all other handlers are legal.
+ //
+ if (CallbackFunction != NULL) {
+ CallbackFunction ((UINT64) (Delta * 10000));
+ }
+
+ gBS->RestoreTPL (OriginalTPL);
+
+ }
+
+ //
+ // Resume the main thread
+ //
+ gWinNt->ResumeThread (mNtMainThreadHandle);
+ } else {
+ gWinNt->timeKillEvent (wTimerID);
+ mMMTimerThreadID = 0;
+ }
+
+}
+
+UINT
+CreateNtTimer (
+ VOID
+ )
+/*++
+
+Routine Description:
+
+ It is used to emulate a platform
+ timer-driver interrupt handler.
+
+Returns:
+
+ Timer ID
+
+--*/
+// TODO: function comment is missing 'Arguments:'
+{
+ UINT32 SleepCount;
+
+ //
+ // Set our thread priority higher than the "main" thread.
+ //
+ gWinNt->SetThreadPriority (
+ gWinNt->GetCurrentThread (),
+ THREAD_PRIORITY_HIGHEST
+ );
+
+ //
+ // Calc the appropriate interval
+ //
+ gWinNt->EnterCriticalSection (&mNtCriticalSection);
+ SleepCount = (UINT32) (mTimerPeriod + 5000) / 10000;
+ gWinNt->LeaveCriticalSection (&mNtCriticalSection);
+
+ return gWinNt->timeSetEvent (
+ SleepCount,
+ 0,
+ MMTimerThread,
+ (DWORD_PTR) NULL,
+ TIME_PERIODIC | TIME_KILL_SYNCHRONOUS | TIME_CALLBACK_FUNCTION
+ );
+
+}
+
+EFI_STATUS
+EFIAPI
+WinNtTimerDriverRegisterHandler (
+ IN EFI_TIMER_ARCH_PROTOCOL *This,
+ IN EFI_TIMER_NOTIFY NotifyFunction
+ )
+/*++
+
+Routine Description:
+
+ This function registers the handler NotifyFunction so it is called every time
+ the timer interrupt fires. It also passes the amount of time since the last
+ handler call to the NotifyFunction. If NotifyFunction is NULL, then the
+ handler is unregistered. If the handler is registered, then EFI_SUCCESS is
+ returned. If the CPU does not support registering a timer interrupt handler,
+ then EFI_UNSUPPORTED is returned. If an attempt is made to register a handler
+ when a handler is already registered, then EFI_ALREADY_STARTED is returned.
+ If an attempt is made to unregister a handler when a handler is not registered,
+ then EFI_INVALID_PARAMETER is returned. If an error occurs attempting to
+ register the NotifyFunction with the timer interrupt, then EFI_DEVICE_ERROR
+ is returned.
+
+Arguments:
+
+ This - The EFI_TIMER_ARCH_PROTOCOL instance.
+
+ NotifyFunction - The function to call when a timer interrupt fires. This
+ function executes at TPL_HIGH_LEVEL. The DXE Core will
+ register a handler for the timer interrupt, so it can know
+ how much time has passed. This information is used to
+ signal timer based events. NULL will unregister the handler.
+
+Returns:
+
+ EFI_SUCCESS - The timer handler was registered.
+
+ EFI_UNSUPPORTED - The platform does not support timer interrupts.
+
+ EFI_ALREADY_STARTED - NotifyFunction is not NULL, and a handler is already
+ registered.
+
+ EFI_INVALID_PARAMETER - NotifyFunction is NULL, and a handler was not
+ previously registered.
+
+ EFI_DEVICE_ERROR - The timer handler could not be registered.
+
+--*/
+{
+ //
+ // Check for invalid parameters
+ //
+ if (NotifyFunction == NULL && mTimerNotifyFunction == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if (NotifyFunction != NULL && mTimerNotifyFunction != NULL) {
+ return EFI_ALREADY_STARTED;
+ }
+
+ //
+ // Use Critical Section to update the notification function that is
+ // used from the timer interrupt thread.
+ //
+ gWinNt->EnterCriticalSection (&mNtCriticalSection);
+
+ mTimerNotifyFunction = NotifyFunction;
+
+ gWinNt->LeaveCriticalSection (&mNtCriticalSection);
+
+ return EFI_SUCCESS;
+}
+
+EFI_STATUS
+EFIAPI
+WinNtTimerDriverSetTimerPeriod (
+ IN EFI_TIMER_ARCH_PROTOCOL *This,
+ IN UINT64 TimerPeriod
+ )
+/*++
+
+Routine Description:
+
+ This function adjusts the period of timer interrupts to the value specified
+ by TimerPeriod. If the timer period is updated, then the selected timer
+ period is stored in EFI_TIMER.TimerPeriod, and EFI_SUCCESS is returned. If
+ the timer hardware is not programmable, then EFI_UNSUPPORTED is returned.
+ If an error occurs while attempting to update the timer period, then the
+ timer hardware will be put back in its state prior to this call, and
+ EFI_DEVICE_ERROR is returned. If TimerPeriod is 0, then the timer interrupt
+ is disabled. This is not the same as disabling the CPU's interrupts.
+ Instead, it must either turn off the timer hardware, or it must adjust the
+ interrupt controller so that a CPU interrupt is not generated when the timer
+ interrupt fires.
+
+Arguments:
+
+ This - The EFI_TIMER_ARCH_PROTOCOL instance.
+
+ TimerPeriod - The rate to program the timer interrupt in 100 nS units. If
+ the timer hardware is not programmable, then EFI_UNSUPPORTED is
+ returned. If the timer is programmable, then the timer period
+ will be rounded up to the nearest timer period that is supported
+ by the timer hardware. If TimerPeriod is set to 0, then the
+ timer interrupts will be disabled.
+
+Returns:
+
+ EFI_SUCCESS - The timer period was changed.
+
+ EFI_UNSUPPORTED - The platform cannot change the period of the timer interrupt.
+
+ EFI_DEVICE_ERROR - The timer period could not be changed due to a device error.
+
+--*/
+{
+
+ //
+ // If TimerPeriod is 0, then the timer thread should be canceled
+ //
+ if (TimerPeriod == 0) {
+ //
+ // Cancel the timer thread
+ //
+ gWinNt->EnterCriticalSection (&mNtCriticalSection);
+
+ mCancelTimerThread = TRUE;
+
+ gWinNt->LeaveCriticalSection (&mNtCriticalSection);
+
+ //
+ // Wait for the timer thread to exit
+ //
+
+ if (mMMTimerThreadID) {
+ gWinNt->timeKillEvent (mMMTimerThreadID);
+ }
+
+ mMMTimerThreadID = 0;
+
+ //
+ // Update the timer period
+ //
+ gWinNt->EnterCriticalSection (&mNtCriticalSection);
+
+ mTimerPeriod = TimerPeriod;
+
+ gWinNt->LeaveCriticalSection (&mNtCriticalSection);
+
+ //
+ // NULL out the thread handle so it will be re-created if the timer is enabled again
+ //
+
+ } else if ((TimerPeriod > TIMER_MINIMUM_VALUE) && (TimerPeriod < TIMER_MAXIMUM_VALUE)) {
+ //
+ // If the TimerPeriod is valid, then create and/or adjust the period of the timer thread
+ //
+ gWinNt->EnterCriticalSection (&mNtCriticalSection);
+
+ mTimerPeriod = TimerPeriod;
+
+ mCancelTimerThread = FALSE;
+
+ gWinNt->LeaveCriticalSection (&mNtCriticalSection);
+
+ //
+ // Get the starting tick location if we are just starting the timer thread
+ //
+ mNtLastTick = gWinNt->GetTickCount ();
+
+ if (mMMTimerThreadID) {
+ gWinNt->timeKillEvent (mMMTimerThreadID);
+ }
+
+ mMMTimerThreadID = 0;
+
+ mMMTimerThreadID = CreateNtTimer ();
+
+ }
+
+ return EFI_SUCCESS;
+}
+
+EFI_STATUS
+EFIAPI
+WinNtTimerDriverGetTimerPeriod (
+ IN EFI_TIMER_ARCH_PROTOCOL *This,
+ OUT UINT64 *TimerPeriod
+ )
+/*++
+
+Routine Description:
+
+ This function retrieves the period of timer interrupts in 100 ns units,
+ returns that value in TimerPeriod, and returns EFI_SUCCESS. If TimerPeriod
+ is NULL, then EFI_INVALID_PARAMETER is returned. If a TimerPeriod of 0 is
+ returned, then the timer is currently disabled.
+
+Arguments:
+
+ This - The EFI_TIMER_ARCH_PROTOCOL instance.
+
+ TimerPeriod - A pointer to the timer period to retrieve in 100 ns units. If
+ 0 is returned, then the timer is currently disabled.
+
+Returns:
+
+ EFI_SUCCESS - The timer period was returned in TimerPeriod.
+
+ EFI_INVALID_PARAMETER - TimerPeriod is NULL.
+
+--*/
+{
+ if (TimerPeriod == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ *TimerPeriod = mTimerPeriod;
+
+ return EFI_SUCCESS;
+}
+
+EFI_STATUS
+EFIAPI
+WinNtTimerDriverGenerateSoftInterrupt (
+ IN EFI_TIMER_ARCH_PROTOCOL *This
+ )
+/*++
+
+Routine Description:
+
+ This function generates a soft timer interrupt. If the platform does not support soft
+ timer interrupts, then EFI_UNSUPPORTED is returned. Otherwise, EFI_SUCCESS is returned.
+ If a handler has been registered through the EFI_TIMER_ARCH_PROTOCOL.RegisterHandler()
+ service, then a soft timer interrupt will be generated. If the timer interrupt is
+ enabled when this service is called, then the registered handler will be invoked. The
+ registered handler should not be able to distinguish a hardware-generated timer
+ interrupt from a software-generated timer interrupt.
+
+Arguments:
+
+ This - The EFI_TIMER_ARCH_PROTOCOL instance.
+
+Returns:
+
+ EFI_SUCCESS - The soft timer interrupt was generated.
+
+ EFI_UNSUPPORTEDT - The platform does not support the generation of soft timer interrupts.
+
+--*/
+{
+ return EFI_UNSUPPORTED;
+}
+
+
+EFI_STATUS
+EFIAPI
+WinNtTimerDriverInitialize (
+ IN EFI_HANDLE ImageHandle,
+ IN EFI_SYSTEM_TABLE *SystemTable
+ )
+/*++
+
+Routine Description:
+
+ Initialize the Timer Architectural Protocol driver
+
+Arguments:
+
+ ImageHandle - ImageHandle of the loaded driver
+
+ SystemTable - Pointer to the System Table
+
+Returns:
+
+ EFI_SUCCESS - Timer Architectural Protocol created
+
+ EFI_OUT_OF_RESOURCES - Not enough resources available to initialize driver.
+
+ EFI_DEVICE_ERROR - A device error occured attempting to initialize the driver.
+
+--*/
+{
+ EFI_STATUS Status;
+ UINTN Result;
+ EFI_HANDLE Handle;
+
+ //
+ // Make sure the Timer Architectural Protocol is not already installed in the system
+ //
+ ASSERT_PROTOCOL_ALREADY_INSTALLED (NULL, &gEfiTimerArchProtocolGuid);
+
+ //
+ // Get the CPU Architectural Protocol instance
+ //
+ Status = gBS->LocateProtocol (&gEfiCpuArchProtocolGuid, NULL, &mCpu);
+ ASSERT_EFI_ERROR (Status);
+
+ //
+ // Get our handle so the timer tick thread can suspend
+ //
+ Result = gWinNt->DuplicateHandle (
+ gWinNt->GetCurrentProcess (),
+ gWinNt->GetCurrentThread (),
+ gWinNt->GetCurrentProcess (),
+ &mNtMainThreadHandle,
+ 0,
+ FALSE,
+ DUPLICATE_SAME_ACCESS
+ );
+ if (Result == 0) {
+ return EFI_DEVICE_ERROR;
+ }
+
+ //
+ // Initialize Critical Section used to update variables shared between the main
+ // thread and the timer interrupt thread.
+ //
+ gWinNt->InitializeCriticalSection (&mNtCriticalSection);
+
+ //
+ // Start the timer thread at the default timer period
+ //
+ Status = mTimer.SetTimerPeriod (&mTimer, DEFAULT_TIMER_TICK_DURATION);
+ if (EFI_ERROR (Status)) {
+ gWinNt->DeleteCriticalSection (&mNtCriticalSection);
+ return Status;
+ }
+
+ //
+ // Install the Timer Architectural Protocol onto a new handle
+ //
+ Handle = NULL;
+ Status = gBS->InstallProtocolInterface (
+ &Handle,
+ &gEfiTimerArchProtocolGuid,
+ EFI_NATIVE_INTERFACE,
+ &mTimer
+ );
+ if (EFI_ERROR (Status)) {
+ //
+ // Cancel the timer
+ //
+ mTimer.SetTimerPeriod (&mTimer, 0);
+ gWinNt->DeleteCriticalSection (&mNtCriticalSection);
+ return Status;
+ }
+
+ return EFI_SUCCESS;
+}
diff --git a/Nt32Pkg/TimerDxe/Timer.dxs b/Nt32Pkg/TimerDxe/Timer.dxs
new file mode 100644
index 0000000..86624d3
--- /dev/null
+++ b/Nt32Pkg/TimerDxe/Timer.dxs
@@ -0,0 +1,32 @@
+/*++
+
+Copyright (c) 2006, Intel Corporation
+All rights reserved. This program and the accompanying materials
+are licensed and made available under the terms and conditions of the BSD License
+which accompanies this distribution. The full text of the license may be found at
+http://opensource.org/licenses/bsd-license.php
+
+THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+Module Name:
+
+ Timer.dxs
+
+Abstract:
+
+ Dependency expression source file.
+
+--*/
+
+
+//
+// Include common header file for this module.
+//
+#include "CommonHeader.h"
+
+#include <DxeDepex.h>
+
+DEPENDENCY_START
+ EFI_CPU_ARCH_PROTOCOL_GUID
+DEPENDENCY_END
diff --git a/Nt32Pkg/TimerDxe/Timer.h b/Nt32Pkg/TimerDxe/Timer.h
new file mode 100644
index 0000000..566ab95
--- /dev/null
+++ b/Nt32Pkg/TimerDxe/Timer.h
@@ -0,0 +1,167 @@
+/*++
+
+Copyright (c) 2006, Intel Corporation
+All rights reserved. This program and the accompanying materials
+are licensed and made available under the terms and conditions of the BSD License
+which accompanies this distribution. The full text of the license may be found at
+http://opensource.org/licenses/bsd-license.php
+
+THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+Module Name:
+
+ Timer.h
+
+Abstract:
+
+ NT Emulation Architectural Protocol Driver as defined in Tiano.
+ This Timer module uses an NT Thread to simulate the timer-tick driven
+ timer service.
+
+--*/
+
+#ifndef _TIMER_H_
+#define _TIMER_H_
+
+
+
+
+//
+// Include common header file for this module.
+//
+#include "CommonHeader.h"
+
+//
+// Legal timer value range in 100 ns units
+//
+#define TIMER_MINIMUM_VALUE 0
+#define TIMER_MAXIMUM_VALUE (0x100000000 - 1)
+
+//
+// Default timer value in 100 ns units (10 ms)
+//
+#define DEFAULT_TIMER_TICK_DURATION 100000
+
+//
+// Function Prototypes
+//
+EFI_STATUS
+EFIAPI
+WinNtTimerDriverInitialize (
+ IN EFI_HANDLE ImageHandle,
+ IN EFI_SYSTEM_TABLE *SystemTable
+ )
+/*++
+
+Routine Description:
+
+ TODO: Add function description
+
+Arguments:
+
+ ImageHandle - TODO: add argument description
+ SystemTable - TODO: add argument description
+
+Returns:
+
+ TODO: add return values
+
+--*/
+;
+
+EFI_STATUS
+EFIAPI
+WinNtTimerDriverRegisterHandler (
+ IN EFI_TIMER_ARCH_PROTOCOL *This,
+ IN EFI_TIMER_NOTIFY NotifyFunction
+ )
+/*++
+
+Routine Description:
+
+ TODO: Add function description
+
+Arguments:
+
+ This - TODO: add argument description
+ NotifyFunction - TODO: add argument description
+
+Returns:
+
+ TODO: add return values
+
+--*/
+;
+
+EFI_STATUS
+EFIAPI
+WinNtTimerDriverSetTimerPeriod (
+ IN EFI_TIMER_ARCH_PROTOCOL *This,
+ IN UINT64 TimerPeriod
+ )
+/*++
+
+Routine Description:
+
+ TODO: Add function description
+
+Arguments:
+
+ This - TODO: add argument description
+ TimerPeriod - TODO: add argument description
+
+Returns:
+
+ TODO: add return values
+
+--*/
+;
+
+EFI_STATUS
+EFIAPI
+WinNtTimerDriverGetTimerPeriod (
+ IN EFI_TIMER_ARCH_PROTOCOL *This,
+ OUT UINT64 *TimerPeriod
+ )
+/*++
+
+Routine Description:
+
+ TODO: Add function description
+
+Arguments:
+
+ This - TODO: add argument description
+ TimerPeriod - TODO: add argument description
+
+Returns:
+
+ TODO: add return values
+
+--*/
+;
+
+EFI_STATUS
+EFIAPI
+WinNtTimerDriverGenerateSoftInterrupt (
+ IN EFI_TIMER_ARCH_PROTOCOL *This
+ )
+/*++
+
+Routine Description:
+
+ TODO: Add function description
+
+Arguments:
+
+ This - TODO: add argument description
+
+Returns:
+
+ TODO: add return values
+
+--*/
+;
+
+#endif
diff --git a/Nt32Pkg/TimerDxe/Timer.inf b/Nt32Pkg/TimerDxe/Timer.inf
new file mode 100644
index 0000000..a5bb8fe
--- /dev/null
+++ b/Nt32Pkg/TimerDxe/Timer.inf
@@ -0,0 +1,100 @@
+#/** @file
+# NT Emulation Timer Architectural Protocol Driver as defined in DXE CIS
+#
+# This Timer module uses an NT Thread to simulate the timer-tick driven
+# timer service. In the future, the Thread creation should possibly be
+# abstracted by the CPU architectural protocol
+# Copyright (c) 2006 - 2007, Intel Corporation
+#
+# All rights reserved. This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+#
+#**/
+
+################################################################################
+#
+# Defines Section - statements that will be processed to create a Makefile.
+#
+################################################################################
+[Defines]
+ INF_VERSION = 0x00010005
+ BASE_NAME = Timer
+ FILE_GUID = C3811036-710B-4E39-8CF1-0AF9BE3A8198
+ MODULE_TYPE = DXE_DRIVER
+ VERSION_STRING = 1.0
+ EDK_RELEASE_VERSION = 0x00020000
+ EFI_SPECIFICATION_VERSION = 0x00020000
+
+ ENTRY_POINT = WinNtTimerDriverInitialize
+
+#
+# The following information is for reference only and not required by the build tools.
+#
+# VALID_ARCHITECTURES = IA32
+#
+
+################################################################################
+#
+# Sources Section - list of files that are required for the build to succeed.
+#
+################################################################################
+
+[Sources.common]
+ Timer.dxs
+ Timer.c
+ Timer.h
+ CommonHeader.h
+
+
+################################################################################
+#
+# Includes Section - list of Include locations that are required for
+# this module.
+#
+################################################################################
+
+[Includes]
+ $(WORKSPACE)/MdePkg/Include/Library
+ $(WORKSPACE)/EdkNt32Pkg/Include/Library
+
+################################################################################
+#
+# Package Dependency Section - list of Package files that are required for
+# this module.
+#
+################################################################################
+
+[Packages]
+ MdePkg/MdePkg.dec
+ Nt32Pkg/Nt32Pkg.dec
+
+
+################################################################################
+#
+# Library Class Section - list of Library Classes that are required for
+# this module.
+#
+################################################################################
+
+[LibraryClasses]
+ UefiBootServicesTableLib
+ WinNtLib
+ UefiDriverEntryPoint
+ DebugLib
+
+
+################################################################################
+#
+# Protocol C Name Section - list of Protocol and Protocol Notify C Names
+# that this module uses or produces.
+#
+################################################################################
+
+[Protocols]
+ gEfiCpuArchProtocolGuid # PROTOCOL ALWAYS_CONSUMED
+ gEfiTimerArchProtocolGuid # PROTOCOL ALWAYS_PRODUCED
diff --git a/Nt32Pkg/TimerDxe/Timer.msa b/Nt32Pkg/TimerDxe/Timer.msa
new file mode 100644
index 0000000..b022741
--- /dev/null
+++ b/Nt32Pkg/TimerDxe/Timer.msa
@@ -0,0 +1,64 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<ModuleSurfaceArea xmlns="http://www.TianoCore.org/2006/Edk2.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
+ <MsaHeader>
+ <ModuleName>Timer</ModuleName>
+ <ModuleType>DXE_DRIVER</ModuleType>
+ <GuidValue>C3811036-710B-4E39-8CF1-0AF9BE3A8198</GuidValue>
+ <Version>1.0</Version>
+ <Abstract>NT Emulation Timer Architectural Protocol Driver as defined in DXE CIS</Abstract>
+ <Description>This Timer module uses an NT Thread to simulate the timer-tick driven
+ timer service. In the future, the Thread creation should possibly be
+ abstracted by the CPU architectural protocol</Description>
+ <Copyright>Copyright (c) 2006 - 2007, Intel Corporation</Copyright>
+ <License>All rights reserved. This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.</License>
+ <Specification>FRAMEWORK_BUILD_PACKAGING_SPECIFICATION 0x00000052</Specification>
+ </MsaHeader>
+ <ModuleDefinitions>
+ <SupportedArchitectures>IA32</SupportedArchitectures>
+ <BinaryModule>false</BinaryModule>
+ <OutputFileBasename>Timer</OutputFileBasename>
+ </ModuleDefinitions>
+ <LibraryClassDefinitions>
+ <LibraryClass Usage="ALWAYS_CONSUMED">
+ <Keyword>DebugLib</Keyword>
+ </LibraryClass>
+ <LibraryClass Usage="ALWAYS_CONSUMED">
+ <Keyword>UefiDriverEntryPoint</Keyword>
+ </LibraryClass>
+ <LibraryClass Usage="ALWAYS_CONSUMED">
+ <Keyword>WinNtLib</Keyword>
+ </LibraryClass>
+ <LibraryClass Usage="ALWAYS_CONSUMED">
+ <Keyword>UefiBootServicesTableLib</Keyword>
+ </LibraryClass>
+ </LibraryClassDefinitions>
+ <SourceFiles>
+ <Filename>Timer.h</Filename>
+ <Filename>Timer.c</Filename>
+ <Filename>Timer.dxs</Filename>
+ </SourceFiles>
+ <PackageDependencies>
+ <Package PackageGuid="5e0e9358-46b6-4ae2-8218-4ab8b9bbdcec"/>
+ <Package PackageGuid="0fb2aa2d-10d5-40a5-a9dc-060c12a4a3f3"/>
+ </PackageDependencies>
+ <Protocols>
+ <Protocol Usage="ALWAYS_PRODUCED">
+ <ProtocolCName>gEfiTimerArchProtocolGuid</ProtocolCName>
+ </Protocol>
+ <Protocol Usage="ALWAYS_CONSUMED">
+ <ProtocolCName>gEfiCpuArchProtocolGuid</ProtocolCName>
+ </Protocol>
+ </Protocols>
+ <Externs>
+ <Specification>EFI_SPECIFICATION_VERSION 0x00020000</Specification>
+ <Specification>EDK_RELEASE_VERSION 0x00020000</Specification>
+ <Extern>
+ <ModuleEntryPoint>WinNtTimerDriverInitialize</ModuleEntryPoint>
+ </Extern>
+ </Externs>
+</ModuleSurfaceArea>
\ No newline at end of file